White Balance pipette request for adjustment brushes

Just a suggestion in the hope that this gets introduced..
could we have the white balance sample pipette on the adjustment brush so that it is even easier to apply localised colour correction?
Cheers
Scot

I imagine sample white balance from an image means the same for localised adjustment brushes as it does when using the white balance pipette in the Basic panel.
click the white balance pipette or shortcut key W... move the pipette over an area you expect to be colour neutral, click and voila.. (Temp & Tint sliders adjusted to a neutral balance)
at least that is what I would hope to happen

Similar Messages

White Balance - Plug in for adjusting

I forgot to set the white balance on my camera before recording. I remember coming across an AE effect plug-in that will set/adjust the white balance but I cant remember which one it is.
thank You
CS4

There's a list of training resources at http://www.synthetic-ap.com/support/kb/420301.html
To do white balance it's really simple: Apply Color Finesse to a layer. In the effect controls window, click the "Auto Color" button. You're done.
Obviously there's a lot more to Color Finesse, but despite its depth, it's pretty simple for doing simple things.
(Note that Auto Color is new to Color Finesse 3 and CS5.)
Bob Currier
Synthetic Aperture

Lost mask option button for adjustment brush

I am not well up on the correct lingo so bare with me please.
When using adjustment brush and Crop tool a bar used to appear under the photo giving me the option of seeing the overlay filter of where i had burned in or dodged.
it also appeared for the 'Done' option when cropping.
This bar has disspapeared from my screen and i can no longer see how much and what areas i have effected with the adjustment tool.
how do i get this option back on my screen?
this is lightroom 3.5 by the way

So simple! Many thanks.
Sent from my BlackBerry® wireless device

Expand white balance beyond 2000K for RAW files

I'm finding, with the mixture of lighting situations I find at weddings (evening venues especially) that 2000K sometimes is not enough for me to get a correct white balance. I'm having to apply a filter on top to get a true white balance.
Is there any reason why 2000K is the current limit? If not, could you expand it past 2000K?
Thank-you!

Try http://robertreiser.photography/articles/proper-infrared-white-balance-in-lightroom/

Is there a good white balance plug-in for Premiere Elements?

Now that I've discovered and installed the Mercalli V2 Stabilizer plug-in (wow, is it great!), I think that the only thing lacking in Premiere Elements 10 is a plug-in to correct white balance.
What I'm talking about is a simple warmer / cooler temperature adustment plug-in.

A true white balance correction plug-in is no comparison to using the three-level Color Corrector or Color Enhancer.
If anyone has done extensive work on still images in Adobe Photoshop as I have, there's absolutely no comparison.
Yes, one can noodle around with the existing tools and kind of get there, but it requires a strong working knowledge of color balance variables.
A white balance plug-in has a simple warmer / cooler slider and can adjust white balance in a couple of seconds without skewing basic color components.

Can I Move the Anchor Point for Adjustment Brush in ACR CS5

It's never been a problem before, but the anchor point for the Adjustment Brush in ACR is sitting exactly where I need to see what is happening. I can delete and start again, but if there is way to move or hide the anchor point while stil being able to adjust the setting, it would be handy to know for next time it happens.

R_Kelly wrote:
You can press the V key to toggle the pins on/off.
Exacty what I was after. Thanks.

Wrong Mouse Pointer for Adjustment Brush with Image on External Drive

Adjustment brush guide "circles" is not visible when hovering over the image. It is only visible when you are to the side of the image in the gray space. This only happens when I am using Lightroom from my external drive. It does not happen from the local copy.

After some research, the brush preset I created happened to have the same settings as "skin smooth +" in Lightroom, which is the one it kept switching to. Perhaps that was the problem...

White Balance color temperature for custom temperature shots

Hello,
I would like to understand why LR and Photoshop too are always show wrong color temperature "As Shot"?
Let say I shoot with 6000K, set manually (Canon 40D, RAW)
Canon itself says it's 6000K in the slide info, fine.
Both Adobe apps says it's 5750K!
What's going on there?
Second question - I know the light was EXACTLY 6000K, but the slide has some green in it. Picking white balance in LR gives me 5900K (which is close to the truth) and +31 Tint, which makes slide neutral.
Of course I can correct Tint manually before the shot by WB Shift in Camera, so the question is: what is the best way - to find more or less appropriate WB shift in the camera, or use WB correction in LR after all?
Thanks
UPD. My suggestion is - Adobe doesn't read custom temperature from RAW file, it's just guessing! Is that right?

The white balance value you see in Lightroom is profile specific. It reads your custom white balance and translates it so that neutrals stay neutral, which is exactly what you want. If it wouldn't do this, your neutrals would shift in color.
The best way to get a correct white balance is to shoot a white balance (grey) card or use one of those filters on your camera to measure it. You can either set it in camera from the grey card or do it with the dropper in Lightroom and sync over the series. The effect will be the same.
P.S. unless you shoot a white balance card, you do not know that the color temp of your light is exactly 6000K. That is quite impossible to know. It might be approximately that under certain standardized conditions but you cannot be sure, no matter what you're told by the manufacturer.

Load balancing HTTP requests for an OC4J instance w/multiple JVMs

Hello everyone,
I am using OAS 10.1.3.1 and wish to load balance HTTP requests across an OC4J group of one or more OC4J instances, where each like named OC4J instance may have multiple JVMs or it may just have one JVM.
My mod_oc4j.conf file would contain the following directives :
Oc4jSelectMethod roundrobin:local
Oc4jRoutingMode Static
Oc4JMount /xyz/* xyz
In the degenerate case, I would like to have an OC4J group with a cluster size of one, and have that one OC4J instance have two or more JVMs. I would like to be able to receive a request within my web application, determine that the JVM that has been sent the request is the wrong JVM to process the request, and then call HttpServletResponse.sendRedirect("/xyz"). Then, when the browser receives the HTTP 302 response and issues the subsequent HTTP request, have that request sent to a different JVM than the previous JVM that issued the sendRedirect().
What I have seen is that the subsequent request is sent back to the same JVM that issued the sendRedirect(). I also call invalidate() against the HttpSession prior to calling sendRedirect(), but that does not seem to affect the behavior that I see.
In the full blown case, I would have an OC4J group with a cluster size > 1, and each of those OC4J instances would have at least one JVM. In that case, I wish the sendRedirect() call to allow the subsequent request to be sent to any one of the OC4J instances in the group, and any one of those JVMs within all of those OC4J instances.
Can anyone verify that my mod_oc4j mount directive is appropriate given the select method and routing mode? What else might I need to do to have a chance to have a different JVM respond to the request that results from a sendRedirect()?
Thank you,
Doug

I should clarify that in the full blown environment, the OC4J instances that form a group will each be housed within a separate OAS instance that resides on its own machine.
So ideally, a request could be inbound to say OAS instance 1 on machine A, OC4J instance AA, JVM 2, and I need to force a redirect so that the request can actually be serviced by OAS instance 3 on machine C, OC4J instance AA, JVM 1, and I need to be able to call sendRedirect() against an HttpServletResponse from within a JVM until the subsequent request from the browser, Internet Explorer in my case, is serviced by that JVM.
Thanks,
Doug

Help! Lightroom 3 Color Swatch for Adjustment Brush has Disappeared!

I selected the Adjustment Brush and then click on the color swatch icon. I remember changing the value to 0. Then the color swatch icon just disappeared.I've tried reseting everything in the adjustment brush settings but the color swatch icon is still gone. In addition to that, If I click on the Adjustment Brush to activate it and the click anywhere on the photo, the entire photo disappears. Has anyone had this problem? Do you know how to fix this issue? Thanks.

I also tried restarting Ligtroom 3. That did not help. I tried rebooting my computer. That did not help, either.

White Balance Tint and Temp Adjustment in 2.0

Not to thrilled with this adjustment so far. The 1.5 version seemed to be more granular, permitting finer adjustment. The adjustment in 2.0 seems to be all or nothing.
Otherwise I'm very happy with 2.0.
Anyone else finding the tint & temp adjustment awkward?
Message was edited by: Rusty Rat
Message was edited by: Rusty Rat

The Aperture User Manual (PDF) on p. 332 describes the use of sliders and "value sliders". Value sliders can be adjusted using small or large increments. Click once on the value field, then mouse down and drag to use a value slider. If you hold down the Option key while dragging, the values will change in small increments. If you hold down the Shift key while dragging, the values will change in large increments.
I have no idea why you you are seeing such large changes when you use the regular sliders, but pressing the Option key while using the Temp or Tint value sliders may work around the problem. Good luck, and please let us know if this works.

How to get AP DP Request document for adjustment in AP Invoice

I am not able to get the AP DP request doc for adjustment in AP Invoice after being paid. Pls revert asap.

Jimit,
You cannot get the AP DP request for adjusting it against the AP Invoice. You have to do a AP DP Invoice. After that make a payment. Then You do a AP Invoice.

White Balance not working

I'm using Aperture 3.2.2 and when I use the white balance 'pipette' tool to select neutral grey area no changes are applied. I think I know how this tool works as I have used it in the past. The image I am trying to adjust I also know needs adjusting as it was shot using bounced flash off an cream surface. Of course I can manually change the white balance using the temperature and tint sliders but have found better results in the past using the select neutral grey.
Anyone else having this issue and know of a fix?

Is it only on certain images that the white balance pipette tool does not work, or is it a general problem?
If it does not work on any images, delete the Aperture Preference files, as described in
Aperture 3: Troubleshooting Basics: http://support.apple.com/kb/HT3805
for sometimes user interface elements do not work, when preference files are corrupted.
If only some images cannot be adjusted, then try the library "first aid": repairing permissions and library.
Regards
Léonie

Nokia 808 Pureview feature request for Phone and C...

Hi,
Where would be the best venue to make feature requests for the 808 functions? These are some nice-to-have ideas that I would like to propose, which would increase its awesomeness:
- in video mode, add a "lock exposure" setting so that the 808 doesn't continuously adjust exposure after recording starts. this would be equivalent to setting the exposure to manual on a regular videocam.
- in photo creative mode, add a voice-activated self-timer, where it would take a shot when sound reaches a certain threshold. this is similar to what the Shout 'n Snap app does for the android.
- in phone calls, add an option to use proximity sensing, so that when you take the phone away from your ear, the handset automatically switches to speaker phone, or vice versa. this would be equivalent to the Phone Speakers Switcher on the N900.
Thanks

i'd like to make an addendum to my request and change it to "lock exposure and white balance".
i just found that while shooting, it does not keep the white balance setting throughout. for example, select "tungsten" and the video will start with this, but later it adjusts as if it was under "auto" white balance setting for the rest of the video.

How to view white balance data in iphoto '09

I would like to be able to see the white balance setting metadata for photos in iPhoto '09, but I'm not finding any way to do that.
The "Show Extended Photo Info" doesn't include white balance.
Thanks,
Tracy

Nines
Welcome to the Apple user to user assistance forums
Any chance you could tell us a bit more? re-read your request and see how you would answer it.
What did you do to lose all of your events?
What have you done since then to bet to the "starting point"?
What is the "starting point"?
Do you have a backup up from before you did what ever you did to lose the events?
You have to give us a lot more information if we are to help you
LN

White Balance pipette request for adjustment brushes

Similar Messages

Maybe you are looking for