White/black stripes on my screen for a few seconds on my Macbook Pro Retina

Hello,
Sometimes there appear on white/black stripes on my screen for a few seconds. There isn't a specific programm or anything when he does that. It comes and it goes. I don't know if it's serieus problem. Do somebody know what to do?
Thanks

Hi there,
I would recommend taking a look at the troublehsooting steps found in the article below.
Mac OS X: Gray screen appears during startup
http://support.apple.com/kb/ts2570
-Griff W.

Similar Messages

  • My iPhone 3G phone button no longer works. If I push it I get a black screen for a few seconds then back to the home screen. Everything else is ok. Any ideas how to fix this?

    The phone button on my iPhone 3G no longer works. Everything else on the iPhone works fine. I can receive incoming calls. I can make calls directly from Contacts. But if I press the phone button I get a blank white screen for a few seconds then it goes back to the home screen. I've tried the hard reset and also restoring orignall settings via iTunes but keep getting the same problem. Does anyone know how to fix this?
    Thank you, Neil.

    Thanks for the advice but I've tried resetting network settings and also the reset by pressing home and sleep buttons until getting the Apple logo. Still have the same problem. To be clear (because I mistakenly typed black instead of blank in the title to this thread): If I press the phone button I get a BLANK WHITE screen for a few seconds then it goes back to the home screen. I doubt it's the SIM card as I can receive calls and make them directly from contacts. What I can't do is view my favourite numbers or missed calls or access my voicemail, i.e. all the things you get to via pressing the phone button.

  • When i type in my correct password on the login screen and press enter it just goes to a blue screen for a few seconds then goes back to the same login screen again, please i need help?

    When i type in my correct password on the login screen and press enter it just goes to a blue screen for a few seconds then goes back to the same login screen again, please i need help?

    You can take some of the steps here, #4, #5 or even trying a #18
    Step by Step to fix your Mac
    but I suspect your going to first have to create a data recovery drive
    Create a data recovery, undelete boot drive
    to get your data off the machine,
    then do a #20 to eliminate the bad sectors as that's why your getting the "pinwheel" it's getting a delay reading from the drive, right when your trying to log in too, what a bad spot for it to happen.
    Step by Step to fix your Mac

  • When I try powering up my phone it stays on the logo screen for a few seconds then turn off, whats wrong with it?

    When I try to power up my iphone 4 32g, it will stay on the apple screen for a few seconds then turn off. even when I try connecting it to my computer it turns on for a few seconds then turns off. Whats wrong with it? and what do I do about it?

    Have you tried charging it with another known working USB sync cable?  After letting it sit to "charge" for at least 30 minutes, have you tried resetting the device by pressing and holding both the Select/Center and Menu buttons together long enough for the Apple logo to appear.
    B-rock

  • HT1338 When turning on Macbook pro laptop I receive a blank screen for a few seconds, then a folder with a ? is displayed  and remains as if the computer is now Frozen. Mac book  Pro leopard operating system. What can I do to get past the freeze?

    When turning on Macbook pro laptop I receive a blank screen for a few seconds, then a folder with a ? is displayed  and remains as if the computer is now Frozen. Mac book  Pro leopard operating system. What can I do to get past the freeze?

    Could the disk have failed?
    Can you hear it?
    Boot from the install DVD and see what Disk Utility says.

  • HT201295 My isight built in camera is only turning on for few second on my MacBook Pro (13-inch, Late 2011 ) when I use any camera needed app. Please help me.

    My isight built in camera is only turning on for few second on my MacBook Pro (13-inch, Late 2011 with osx Yosemite) when I use any camera needed app. Please help me. Its getting a little annoying.

    If restarting Mac or reinstalling OS X does not correct this symptom, you likely have a hardware problem.  Contact Apple Support or an Apple Authorized Service Provider for service.
    Message was edited by: EZ Jim
    Mac OSX 10.10.1

  • Ipod touch 5th generation battery screen with lightning bolt locked cannot charge or restart.  ive tried everything from new cables attempting to shut down but stays at screen for a few seconds then black screen again over and over

    screen locked up and shows the battery with low red and ligtning bolt and cannot hard shut down or reset just stays there for a few seconds then black screen. hooked up to computer and itunes doesnt recognize it or even shows that it is pluged in.  looked and made sure nothing is broken or metal in ligting port or on cable which would prevent it from accepting a charge. ipod is only a month old and seems like a waste of money if its so hard to try to get an explanation of why this is ive been tryning to get an answer from apple for a week now.

    Try:
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try on another computer
    - Try another cable. Some 5G iPods were shipped with Lightning cable that were either initially defective or failed after short use.
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar       

  • I am using photos . I add a camera and make my photos slide in.  How do I add a second behavior to the photo to make it slide out.  I want the photo to hold on the screen for a few seconds in between sliding in and sliding out.

    I am using photos in Motion 5.  I add a camera and make my photo slide in.  How do i add a second behavior to the photo to make it slide out?  I want the photo to hold for a few seconds in between sliding in and sliding out.  When I am trying to do this  I am not getting the photo to hold, i am making one continuous motion which I do not want.
    Thanks

    Are you using the "motion path" behavior? If so just duplicate it and drag it down the timeline to where you want it to start. Trim it to end at the end of the project. The gap you leave in the timeline between the two behaviors is your hold time. Not sure why you are using a camera unless you have a behavior on the camera.If you are using keyframes just set two keyframes at the same position values in the inspector for the hold time.

  • Ipod touch will not turn on. Did a synch turned on. Then turned off.       and tried to restart. Apple logo came on screen for a few seconds then disappeared and cannot turn back on. This is a new replacement unit. only have had it 4 days.

    Tried powering on again after syn. Apple logo appeared for a few seconds then disappeared and now can not turn on. This is a replacement unit, only have had for 4 days

    Did you try to connect in recovery mode and restore "as new device", without using the latest backup afterwards? iPhone and iPod touch: Unable to restore and How to back up your data and set up as a new device

  • Screen flashes when waking up from sleep, Macbook Pro Retina 13" early 2013

    Hey guys,
    I have an issue with the wake up procedure on my new Macbook Pro Retina 13". This is how it looks: http://youtu.be/pBK8vRiVdX4
    When my computer has been in sleep mode for a longer time (approximately 1-3 hours) it does this strange thing when I open the lid. It is black for a time and suddenly there is a blue flashing screen before it goes to the desktop. This process is about 10 seconds.
    Does anyone know if there is a solution for this? Have you had the same problem? I called Apple support this morning and he told me to reset SMC and clear the PRAM, but the issue is still there.
    Please let me know if you know something about this.
    Kindly,
    Mikael

    i had the same problem too and i think i could isolate its cause. I tried a few things on my 13 inch retina macbook pro like switching off functions like ''put hard disk to sleep when possible'' but this wasnt a solution to the problem... after alot of playing around with my macbook, i realised that this flashing problem only occured when my macbook was scaled up to any resolution other than the native resolution... when i went back to the native resolution, the flashing stopped and my macbook started almost instantaneously after opening the screen... you should try it out... and tell me what you think...
    think it is pretty annoying that we get this issue when scaled up to some other resolution and wish there is a solution somewhere online to solve this... but for now, i think it is quite an annoying bug but still not something i cant live with...
    tell me what think about it:)

  • Setup procedure for email via iCloud simultaniously on MacBook Pro-Retina, iPad2 and iPhone3GS

    I am looking for a "clean" and official procedure to setup email incoming/outgoing/sync service via iCloud simultaneously on three different devices:
    MacBook Pro-Retina ( Mac OS 10.7.x Lion)
    iPad2 (with data plan via Verizon3G)
    iPhone3GS (with data plan via AT&T)
    Primary email account is [email protected], and iCloud is the only profile setup on all three devices at the moment.
    Secondary email account is [email protected] but it is automatically forwarded to the primary one, as well.
    However, in such simplified basic setup scenario, still multiple copies of the same email messages are received on MacBook, iPhone or iPad devices / mailboxes.
    All of your suggestions, ideas and experience would be highly appreciated.
    Thank you.

    Here is the official documentation how to set up an iCloud account on your iOS devices, Mac, and PC: http://www.apple.com/icloud/setup/
    To set up your iCloud account follow these steps:
    - On your iPhone/iPad (iOS 5): Open "Settings > iCloud"
    - On your Mac (Lion/Mountain Lion): "Open "System Preferences > iCloud" (If you do not have an iCloud icon in System Preferences: "System Preferences > Mail, Contacts, Calendars > iCloud")

  • Safari always freezes screen for a few seconds when i try to play a video on youtube.

    hi,
    first: im german and i got a normal knowledge of english, so please be fair
    the problem is, when i visit youtube and click a video, its loading and freeze a few seconds (sound doesn't freeze).
    html5 is off
    cookies, history delete
    flash player (newest)
    didn't work and i don't want to switch the browser (videos on chrome working)
    im a new mac-user since 4 days
    best regards

    Flash is required for YouTube content.
    Open System Preferences > Flash Player then select the Advanced tab.
    Click Delete All under Browsing Data and Settings
    Not empty the Safari cache.
    From your Safari menu bar click Safari > Preferences then select the Advanced tab.
    Select:  Show Develop menu in menu bar
    Now click Develop from the menu bar. From the drop down menu click Empty Caches.
    Now try a video.

  • Iphone 3g shows Apple screen for a few seconds then shuts down

    Hey everyone, I've searched all over for a fix for this, but can't seem to find anyone who has had this problem answered. I was away for a while and didn't use my phone, when I got home today it froze up two or three times, so I put it into recovery mode and went through the normal steps of restoring from my last backup no problem. The phone seemed to backup fine and got was syncing my music/photos/etc. and I decided to go for a run. I came back 45 minutes later and it was shut down and not doing anything. When I went to restart it the black and white Apple logo screen popped up like normal for about 15-20 seconds then it shut down. It continues to do this no matter what I try. The only issue I can think of is that the battery was really low when I plugged it in for the restore, but it made it to the sync portion without a problem, so I'd assume it should have been charging.
    I've gone through all the recovery/restore steps I can find on the net. I've tried removing itunes from my computer and reloading it, both just with the application only and then all the correlating files. I've tried restarting about 15 times, plugging into different USB ports and even using my brother's powerbook to restore it. When I plug it in it recognizes that it's plugged in and the boot screen comes up, but it shuts down before it's recognized by itunes.
    Has anyone had this problem and overcome it? Does anyone have any input other then referring me to this page: http://support.apple.com/kb/HT1808 or trying to put it into DFU? It's out of warranty and if at all possible I'd rather not buy a new one. Thanks in advance for your help.

    I guess, putting it in recovery mode and restoring it "as new phone" is your only chance if you can make it. Restoring from a backup may copy corrupt files back to your phone, causing this problem.

  • I bought a 3TB Time Capsule with the intent of using 2GB as space for Time Machine to backup my MacBook Pro Retina; and the remaining 1TB as network disk space for the Apple and my PC.  But the 3TB all went to the Time Machine.

    How can I get from what I have ti what I want.  I am a new Apple user and appreciate detailed instructions.  Thank You

    The TC is not able to be partitioned. (Well not without pulling it apart.)
    You can create a disk image on it.
    See details under Q3 here.
    http://pondini.org/TM/Time_Capsule.html
    It might be better to do as Pondini suggests and plug in a USB drive to use for alternative data storage.. Mixing TM and data can lead to issues.

  • MacBook Air, MacBook Pro Retina, or Non- Retina for academic high school student?

    I will be going into high school in September and am thinking of getting a MacBook for school. This is my first computer except for the family PC desktop. I am in all academic classes, and am taking business and exploring technology ( designing and building things) I would use the laptop for schoolwork as well as gaming ( nothing too intense, just stuff like portal and Garry's mod), internet, iTunes, and ilife. It will be a gift from at least 7 people, so price is important, but not a huge factor. I think a 13" screen in perfect for my needs. Would a MacBook Pro Retina, a MacBook Pro non- retina, or a MacBook Air be the best choice for me?

    If you use DVDs and CDs more than often (most people don't) then go for the MacBook Pro nonretina. I would go for the MacBook Air or pro retina because their graphics cards are much better then get a $40 usb DVD drive to load movies and other content. The MacBook Air and MacBook Pro retina also have "flash storage" and haswell chips making them super fast at opening files and applications and boosts oversell performance. You sound like you're not going to be doing any editing or graphics intense work so I would recommend the MacBook Air with 8gb ram and however much storage as you want. For around $100 more you could get the MacBook Pro retina that has the amazing display and better graphics. In the end, if the retina display would be the only real upgrade for you and price is in consideration, I would recommend the MacBook Air (also apple usually releases new model macbook airs in June so you could get one now or just wait. I would wait).

Maybe you are looking for

  • Navigating does not initialize BindingContainer

    I have 6-step process. The last step is a review (call it P6) and does overall validation on page load (implemented in PagePhaseListener after prepareModel phase). If it finds some errors, I want to forward to specific step and display it. If there a

  • Is table necessry for dimension?

    Hi Everyone; Q:1 I am a student and facing a problem in dimension creation. My problem: it is necessry that i must create table before dimension creation ? Q:2 if i do not create dimension and i want to make a cube of these tables, office, accounts,e

  • Integration with JAZN

    Hi! I have implemented a contract-first web service using Spring-WS, and would like to authenticate towards the OC4J JAZN Jaas security provider. Is it possible to integrate with JAZN by accessing the JAAS api directly? I have set up my own realm in

  • SAP Lumira Workshops are now part of the Events Calendar!

    Don't miss out any enablement for SAP Lumira. We maybe in a town near you! Check out the SAP Lumira Hands-On workshops on SAP Lumira Calendar. For any questions, please reach out to Ruchi Sethi See you there! Best Regards, Lumira Customer EG Team

  • MARS call when system is down

    Hello - I want to set MARS up to monitor my firewall and email server to make sure they're up. If either of these devices appear down to MARS I want MARS to notify me via its modem and analog phone line. I see where you can set up a pager or SMS. I'm