White/Blank Screen After QT 7.0.3 Update

Ok, I am having the same problem as others on this board, and, after having sifted through every single thread, I still have not come up with any correctable answers to this problem.
I, like others, recently updated to QT 7.0.3, and now any .mov or other video file I try to play will only playback audio, leaving the screen white. I have installed/uninstalled, downloaded just about every codec I can find or was suggested, and still nothing. And, just to make it even more fun, after upgrading to QT7, I am now having the same problem in every single player, including WMP and realplayer with any video product either streaming or downloaded (and previously operational).
The file I am trying to play is a streaming .mov, http://www.nin.com/thespiral/10-16sanantoniospiral.mov.
The info on the screen shows this:
FORMAT: Sorenson Video 3, 240 x 180, Millions
MPEG layer 3, Mono, 44.100kHz
If someone could please help, I would be extremely appreciative. I am about to rip every hair folicle from my head at this point.

Sadly, I am an idiot. I knew it would be something simple that I was missing. I went and ran a diagnostic, and that was fine, and then I realized I had changed the display settings for another project I was working on, so I switched it back to the higher setting, and wahla....I have video.
D'oh.

Similar Messages

Blank screen after firefox 33.0 beta update

Previously everything was fine, but after the latest Beta update 33.0 when I start my browser a black screen opens instead of a normal screen. I tried to reinstall it but still the same problem. Plz help me.

Hey there,well I tried in safe mode,and everything is ok there,but when I restarted to normal conditions the same problem is still there,now how can I go though the menu options for troubleshooting ,when I cant even see the screen? I am attaching a screenshot what the browser looks when I open it.

CP8 - White/blank screen during pre-load when the pre-loader is set to below 100%

My Captivate 8 project contains an hour of audio. When my pre-loader is set to 100% the course takes about 2.5 minutes to load. To reduce load time, I have experimented with reducing the pre-loader below 100%. However, when the pre-loader is set to anything less than 100%, my course shows a white/blank screen after the preloader and before the audio begins to play. The white screen is shown for about 10-20 seconds. The white screen gives the impression that the course has not loaded properly. Does anyone have any suggestions?

I am trying to reproduce the issue at my end, I used an audio which is about an hour long and broke it slide-by-slide as you mentioned. But I don't see any white screen before or after changing the pre-loader percentage. I even tried setting it as low as 10% but still no blank screen. I doubt this can be specific to the audio file or may some other element in project is causing the issue. Is it possible for you to share the project so we can debug the issue? My email address is [email protected]

PC fails to reboot and shows blank screen after automatic windows updates including SP

Pavilion- a1130n" WINXP ProfessionalC fails to reboot and shows blank screen after automatic install ing windows updates including SP 3

I would love to say that a refresh worked for me however it did not.It takes about 30 Minutes total I was able to trace part of the issue to a Registry Key that was tagging the processor. Because my BIOS manages its own temp gauge and windows is trying to
build on in I had to turn the BIOS one off as well as for some reason I get better funtionality with Visualization off.
I am still dealing with a lag but I was able to get ride of the freeze that made the computer completely useless.

Hi, a dvd got stuck in my mac mini and after looking at solutions online and attempting some not only has the dvd not ejected but my mac wont turn on properly, there is simply a white blank screen, can anyone help me please? thanks

Hi, a dvd got stuck in my mac mini and after looking at solutions online and attempting some not only has the dvd not ejected but my mac wont turn on properly, there is simply a white blank screen, can anyone help me please? thanks

Hi Claire, sounds dire, but some things to try...
Have you done a PRAM reset, CMD+Option+p+r...
http://support.apple.com/kb/HT1379
In fact, do 3 in a row, takes a bit of time.
Intel-based Macs: Resetting the System Management Controller (SMC)...
http://support.apple.com/kb/HT3964

Blank Screen after start-up chime, won't start

I'm rather perplexed as to what's happened to my PowerBook. I'll run throught it
PowerBook 12" 1.33 768
Background:
I've just updated it to 10.4.4, which caused it to get stuck at the Apple symbol and spinning wheel. I had to restart in single user mode and run applejack, restart again and it was fine.
Recently the PowerBook started to not wake from sleep, I'd have hold down the power button then restart it. I thought it had done teh same thing today, but this time it makes the start-up chime but gets no further than a blank (dark, black) screen.
I tried inserting the Mac OS X CD and start up holding down the C key, but still same blank screen (with the added benefit that I'm now unable to remove the CD)
I tried plugging it into an external monitor, but nothing.
I've tried resetting the Preference RAM and the PMU. With some limited success. On occasion after resetting the PRAM, turning it off then back on, it starts with something like a extra blow of air from the fan and white blank screen instead of a black one. It then won't turn off at all, the only way is to pull the power and the battery.
I've noticed that when the ac adapter is plugged in and i've the white screen it flashes very quickly, orange.
I tried starting in Tartget disc mode connected to an iMac, the disc doesn't appear.
I tried starting up with an external firewire drive attached, nothing.
I've tried starting holding the keys for open firmware mode, nothing.
I've removed the AirPort card, no change.
I removed the extra 512mb RAM with no change.
The screen is clearly working, has anyone any ideas how to get it started?
Any help would be appreciated, it's a second hand PowerBook and so has no AppleCare.
Cheers
Stuart

I had the EXACT same problem happen to me, Stuartea71. My PowerBook crashed on the on Feb. 4th and I still can't figure it out. I had just dowloaded the 10.4.4 update, bought iLife 06, and ordered a new battery.
I tried every single thing that you did above. I finally called customer support, and walked me through a few things which I had already tried, but she finally pin pointed something in disk utility that I missed. My disk would not mount. In red letters it said "failing." She told me that was a internal HD problem that needs to be fixed by a certified tech.
I did something I'd never done before. I put my HD to sleep to optimize battery performance. I work with podcasts and downloaded a large file. Unfortunately I forgot my battery setting. I chalk it up as a lesson learned, and just bit the bullet and ordered a MacBook Pro.
BTW... if you all customer service they basically read directly from the Apple Website. I paid $49 dollars for someone to tell me my mac was broken and send it in.

My iphone 5 suddenly has a white blank screen, no liquid contact or history of fall, what can i do with this problem?

my iphone 5 suddenly has a white blank screen, no liquid contact or history of fall, what can i do with this problem?

Hey there Galileo,
It sounds like your iPhone screen is solid white and you cannot do anything with it. Take a look at these steps from the following article about that kind of issue:
Get help with the screen on your iPhone, iPad, or iPod touch
If you see a solid color screen (black, white or blue)
Plug in your device to a power source. If you see the low-battery screen when you plug in, let your device charge for at least 10 minutes (20 minutes for iPad) before using it.
Reset your device while it's plugged in.
If resetting doesn’t fix the issue, restore your device.
If you still see the issue after you restore, contact Apple Support.
Thank you for using Apple Support Communities.
Regards,
Sterling

Please help! Blackberry Torch 8610 stuck in white blank screen!

sorry for my bad english..
i'm indonesian ^^
before this problem happends, about 3 days ago i've got an error message saying built in media got an error so must repair it or wipe it.. i tried to repair it, but it keeps saying built in media repair failed. so i wipe it..
but, a couple of seconds after i click wipe built in media, my blackberry reboots by itself..
after it finished rebooting, my blackberry tells me built in media got an error again.
and i tried to wipe it again but my blackberry still rebooting it self again.
this happends 4 times in a row.
and then, when the fourth reboot finished, i tried to wipe it again..
and yes, the blackberry still rebooting itself again.
but, this time, my blackberry didn't finish rebooting, the loading bar stuck in 3/4 of the bar.
its stuck like that for 3 half days.
i tried to fix it with app updater, but its still stuck in 3/4 of the bar.
so today i tried to fix it with JL_cmder
i tried to restore it to factory default.. but it keeps failed connecting to the device..
the third time i tried, it got a white blank screen when reaching the 3/4 loading bar..
please help..
i would really appreciate your help.

Download BBSAK onto your computer. Connect your phone to the computer and close out BlackBerry Desktop Software as soon as it opens. Then start BBSAK and do the wipe from there. You should get a screen saying there is no OS. At this point you should be able to install the OS either from BBSAK or from the BlackBerry Desktop Software. Try it and report back.

Blank Screen after 703HP3 (Linux)

Hi,
after update a VMWare-SLES10SP2-Server with DOM and Webaccess HP703HP1 to
HP703HP3 I got a blank screen after starting the machine.
All logs look got but I can't login in. Only a blank web page. No login. No
picture. Nothing.
Any idea?
Have anybody the same problem?
I went back to my snapshot. So my user can login.
Now I will try it at another server.
Andreas

Hi Massimo,
the login web page for webaccess for the user...
Andreas
"Massimo Rosen" <[email protected]> schrieb im Newsbeitrag
news:[email protected]..
> Hi,
>
> Andreas Schild wrote:
>>
>> Hi,
>>
>> after update a VMWare-SLES10SP2-Server with DOM and Webaccess HP703HP1 to
>> HP703HP3 I got a blank screen after starting the machine.
>
> What do you mean "a blank screen"? A blank screen where?
>
>> All logs look got but I can't login in. Only a blank web page. No login.
>> No
>> picture. Nothing.
>
> I'm sorry, but it's totally unclear what you're talking about. What web
> page?
>
> CU,
> --
> Massimo Rosen
> Novell Product Support Forum Sysop
> No emails please!
> http://www.cfc-it.de

Blank Screen after Hibernate

Hi,
On my DV6-3085 I sometimes power up by opening the lid and get a blank screen after a few seconds.
The screen will say Starting Windows, flash and then go blank. At this point the finger print scanner is still working and responds but you cannot obliviously see anything.
I fairly suspicious this happens after the laptop has not been used for a little while (overnight) after a lid close, so the Sleep light has stopped flashing and the laptop is in hibernate mode.
My guess is it is something to do with switching graphics adapters. I've not yet decided if plugging the power in first does or does not make a difference or being on battery or AC when the lid was closed.
I've got the latest drivers according to the HP driver update utility.
Anyone with the same problem or have a solutions?
Thanks,
Dean.

Hi,
On my DV6-3085 I sometimes power up by opening the lid and get a blank screen after a few seconds.
The screen will say Starting Windows, flash and then go blank. At this point the finger print scanner is still working and responds but you cannot obliviously see anything.
I fairly suspicious this happens after the laptop has not been used for a little while (overnight) after a lid close, so the Sleep light has stopped flashing and the laptop is in hibernate mode.
My guess is it is something to do with switching graphics adapters. I've not yet decided if plugging the power in first does or does not make a difference or being on battery or AC when the lid was closed.
I've got the latest drivers according to the HP driver update utility.
Anyone with the same problem or have a solutions?
Thanks,
Dean.

Laptop only coming up with a blank screen after set-up?

Ok, so. My parents bought me a brand new hp laptop for christmas. On christmas day i went through the whole set-up process and did all the steps it told me to do. When i'd been through all the steps, i got a loading symbol and ever since, all it comes up with is a blank, black screen and a mouse icon that i can move. I'm not 100% sure of the model though (appologies). What do i need to do??
Cheers

Hello @15_,
Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More.
I have read your post on how your notebook is coming up with a blank screen after setting it up. Is the power on the computer on? Is there an error message on the screen? I would be happy to help you, but first I would encourage you to post your product number for your computer. Below is a is an HP Support document that will demonstrate how to find your computer's product number. In addition, it will also help if you indicate which operating system you are using; and whether your operating system is 32 or 64 bit. The more information you can provide, the better!
How Do I Find My Model Number or Product Number?
Which Windows operating system am I running?
Is the Windows Version on My Computer 32-bit or 64-bit?
Please re-post with the necessary information, this way I will be able to research this further for you. I look forward to your reply!
Cheers!
MechPilot
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the right to say “Thanks” for helping!

IPOD Help~(cannot view anything except a white blank screen)

Alright...I never expected to post up something in this discussion thread this soon...since I got my 30gig iPOD just three days ago...and curious as I am to things...I think I broke it, hah~
Anyways...I need some help.
Here's the story.
I was updating my iPOD to a newer version, I'm assuming...and during the updating process...I accidently 'x'ed out of the box...and now my iPOD screen does not show anything except for a white blank screen. If I hold down the menu and center button for six seconds...It shuts down...but when I release/let go of the buttons...it makes a ring sound and goes back to the white blank screen.
And also...when I go to the start menu and look under the iPOD folder...it has an update your ipod thing...I clicked it...and it pops up with a screen, saying stuff like it's 'initializing'...and tells me to plug in my iPOD with the usb chord...but I get a message saying 'can't mount iPOD' or 'internal error'
I think I've tried anything there is to solve this problem...like the five R's...etc.
I do not want to think that I broke my iPOD already. So if anyone knows, please reply back.
Thanks in Advance

Hi Sky,
Hmm - I see the shapes, I'm not sure why they're disappearing when you draw them - too simple of a file to point at some other issue. It seems like something with the installation went wrong or is missing (the player that renders the Stage for AS3 documents). I think the first thing will be to get the update. Can you try downloading from this page instead of through the update manager? http://www.adobe.com/support/flash/downloads.html Then try running the executable that you download. If this doesn't fix it, Flash may need to be fully removed and reinstalled.
Jen.

Bootcamp goes blank screen after startup sign.

I'm unable to start up my bootcamp. It just goes blank screen after the startup moving icon and stays blank screen. Can anyone help? Thank you in advance!!!

@MT1
‎Thank you for using HP Support Forum. I have brought your issue to the appropriate team within HP. They will likely request information from you in order to look up your case details or product serial number. Please look for a private message from an identified HP contact. Additionally, keep in mind not to publicly post ( serial numbers and case details).
If you are unfamiliar with the Forum's private messaging please click here to learn more.
Thank you,
Omar
I Work for HP

E 72 crash and stuck on white blank screen

i just saved mms settings and rebooted my E 72 and then it would not start. it gets stuck on a white blank screen. what to do?

Try doing the following as well:
1.. *#7780# - Restore factory settings - resets all the settings to the default ( you will not lose any data)
- Make sure you back up your data first as you will lose all of it when you perform. The default code for ALL operations listed here is 12345.
2.*#7370# - Reformat your phone. ALL data may be lost. still it is a good idea to always do a back up of your stuff.
This you perform as a last resort. Nothing else is working.If the phone is not showing any activity, proceed with hard formatting , turn off your phone, hold the following buttons while pressing the power button. (the default code is 12345)
3. hard reset - hold the following buttons * (star key), 3 (number button) and talk/green key. turn on the phone and do not release those buttons until you see the Nokia boot up screen. once you feel the phone power up you can let go off the power button while still holding all three buttons.
If these codes are not working the only thing for you to do is contact your Nokia Care Center/Service for assistance.

Blank screen after login in SAP CRM 2007

hi,
we are experienceing blank screen after we login to crm2007 web client.
what we have done
- implemented sap note 168941, 612670, 1045941, 1144511
- assign PFCG role to business role
is there any other step we missed?
Thanks.

Hi friend,
Please, check if in your pfcg profile you have the objects:
uiu_comp
CRMCONFMOD
with value *
Regards,
Lalas

White/Blank Screen After QT 7.0.3 Update

Similar Messages

Maybe you are looking for