WHITE bluetooth keyboard pairing

I just was given an older model bluetooth keyboard (with the 10-key), and I cannot for the life of me figure out how to put it into discoverable mode. I've changed batteries, tried to reset it, but I can't figure out how to get it paired with my Macbook Air.
Any help? Ideas?
PLEASE!!

It is an older version of Bluetooth on that keyboard and the firmware cannot be updated. It is not compatible with any iOS based devices.

Similar Messages

  • I just opened my new Mac Pro and I have a USB keyboard, not a bluetooth -- it doesn't recognize the USB keyboard and I can't get past the "bluetooth keyboard pairing" screen.

    I just opened my new Mac Pro and I have a USB keyboard, not a bluetooth -- it doesn't recognize the USB keyboard and I can't get past the "bluetooth keyboard pairing" screen.

    What specific KB?
    Do you know it works?
    I set my 2103 nMP with an older (black) Apple USB KB and it worked fine

  • The bluetooth keyboards pairs, but I can't type.

    The blue tooth keyboards do pair, but after that no keystrokes are recognized by the Mac.I have tried with three different bluetooth keyboards with the same results, so it's not the keyboard itself. Mouse works though. I have tried to pair the keyboard again, but with the same results. I am currently on iOS Mountain Lion. Also Mouse Keys are disabled, so that's not the issue. Anyone experienced the same and found a solution?

    Hello:
    I reread your post.  OS X 10.8 and iOS are different.  What are you trying to pair the KB with?  I also did not ask if the keyboards are Apple devices......
    Since tyou said you have tried with three keyboards, it obviously is not a faulty KB.  One other thing I can think of to try requires a working KB (reset the PRAM).
    You might also trash a preference file (com.apple.bluetooth.plist) and restart.
    Is one of the keyboards new (and Apple branded)?  If so, I would take it to an Apple store and talk to someone at the genius bar.
    Barry

  • A1016 Apple Bluetooth Keyboard Pairs, but will not work

    I have one of those A1016, 1st generation, Apple Bluetooth keyboards,
    had it since late 2008, that will pair via bluetooth setup assistant, I
    can enter the passkey on the keyboard and I get the "congratulations
    your computer is now setup to use your bluetooth keyboard, message but,
    as soon as it is paired the keyboard accepts no input.
    The problem started after I left the keyboard in my car overnight, and
    switched on, I believe, while the only macbook I had ever used the
    keyboard with was with me, 30 miles away. If I had not been in an
    extreme hurry at the time I probably would have thought to take the
    batteries out of the keyboard.
    The battery level, currently, is at about 79%. The light on the caps
    lock key does not come on, but the green light on the on switch,
    underneath the keyboard, does seem to work, when I first switch it on
    that light blinks for a period of time.
    Incidentally, the keyboard has been in this condition for a long time,
    now, and I deleted com.apple.Bluetooth.plist many times and I repaired
    permissions, even with "applejack" and with "iceclean", many times since
    the problem started.

    Hi Barry, thanks for the quick reply. I am not familiar with "favorites" for BT, but I checked, and of the several BT devices I have re-paired, only the keyboard is NOT a "favorite". Odd thing is, I have no idea how to make a device a "favorite" (or not)! Don't know how it happened for the other devices.
    The Apple support document TA2137 says to click on the "add to favorites" button, but I see no such button and no way to make a BT device a "favorite". I have no idea how my other BT devices got so designated. I think I've applied all software updates.
    Can you help me on setting that BT "favorite" status?
    Thanks,
    Dave

  • Bluetooth keyboard pairing repeated requests after mavericks update dec 20? ogitech MX5500 eventually connected but I keep getting repeated bluetooth pairing requests and it is driving me mad! Please Help! Anyone else suffering this?

    This just started after Maverick update installed Dec 20.frustrated and annoyed that apple would release an update that makes apple users lifes such a misery . Anyone else suffering same problems. I can switch bluetooth off that  makes using multiple screens difficult which is why I bought this $ 2800 top spec Mac retina 15 inch pro in the first place. I'm using Logitech MX5500 keyboard. Logitech MX1000 mouse works fine
    Any suggestions or solutions much appreciated and hopefully apple gets their act together..

    I am having this same issue - where I work, we use bluetooth trackpads. If my boss tries to connect his wireless bluetooth keyboard to his computer, I get the request on my machine every single time. The "Bluetooth Troubleshooting" article does not address any part of blocking requests, bluetooth security settings, or anything related to this issue at all, really. I do not believe there is currently any fix or setting that CAN resolve either of our problems, but I'm hoping that posting this at least puts the issue out there for hopefully somebody who can address this issue to see.

  • Bluetooth Keyboard Pairs But Doesn't Work!

    Hi all,
    I powered on my Mac and went to add the keyboard. It then found the keyboard and went through the process of pairing, showing the keys on the kyboard to tap to finish the process. I did this and then the pairing was complete and all looked fine.
    I tried to type something on the keyboard and nothing would work, not in any program.
    What is stranger... even though I could pair the keyboard by pressing the right keys, when I opened Keyboard Viewer, nothing is shown for any key apart from a few such as command and alt.
    Also, the volume keys work absolutely fine.
    I went to see if things were looking OK from a bluetooth perspective and indeed, they are! The keyboard shows up as being connected and looks fine, I have even been into system profiler and it seems to know exactly what keyboard is connected.
    Has anyone come across this issue before?
    By the way, I have been using a PC keyboard and mouse (both are wired) on this machine since I bought it and it has been fine, I'm not sure if this would have any impact on things. While I am trying to use the wireless keyboard I am leaving the wired mouse connected, though I have tried without and it still does the same thing, nothing! The batteries are fresh in the keyboard too.
    Any help with pointing me in the right direction here would be greatly appreciated.
    Thanks in advance.

    Hi Barry, thanks for the quick reply. I am not familiar with "favorites" for BT, but I checked, and of the several BT devices I have re-paired, only the keyboard is NOT a "favorite". Odd thing is, I have no idea how to make a device a "favorite" (or not)! Don't know how it happened for the other devices.
    The Apple support document TA2137 says to click on the "add to favorites" button, but I see no such button and no way to make a BT device a "favorite". I have no idea how my other BT devices got so designated. I think I've applied all software updates.
    Can you help me on setting that BT "favorite" status?
    Thanks,
    Dave

  • HT201178 Bluetooth keyboard pairing woes

    My keyboard used to be paired to a computer. That computer is now gone. How do I get the keyboard into discovery mode?

    I found the answer in this thread...
    https://discussions.apple.com/thread/2693201
    Basically, hold down the powerkey on the wireless keyboard while you are running the bluetooth setup assistant.
    I had to do it twice since there is really no way of knowing whether you are turning the keyboard on or off.
    Good luck.

  • Bluetooth keyboard pairing issues

    HI, recently my wireless keyboard got disconnected to my IMac and now I can't pair it. I have read various posts on the subject and tried many remedies including battery change, holding power button whilst entering code multiple times, removing com.applebluetoothexchange file and restart and none have worked. i am only being asked to enter a 6 digit code however and lots of the posts refer to an 8 digit code.
    any thoughts, help, advice or counselling would be warmly received.
    matt

    Which Apple wireless keyboard are you using?
    See this Apple doc -> iOS: Apple Wireless Keyboard compatibility
    The original Apple Wireless Keyboard, introduced in 2003, is not compatible:
    Apple Wireless Keyboard (2003): Features a white case and uses four AA batteries.
    If you're using a compatible keyboard, does it pair with your Mac? Try turning it off and then back on and then pairing it again.

  • Bluetooth Keyboard Pairing Error

    Hello,
    I have a CipherLab 1660 bluetooth barcode scanner that is recognized as a keyboard by the TouchPad's Bluetooth Settings application when the scanner is configured in HID mode. The TouchPad prompts me to choose a PIN, which I do (I've tried various combinations of one to four numerals). Then I scan the PIN on the barcode scanner just like I do when I'm pairing it with any other device. Unfortunately, on the TouchPad I get an "Unable to connect" error in red above the device list as soon as I scan the barcode to confirm the PIN at the very end.
    On the barcode scanner I've tried SPP Master mode (which makes the TouchPad fail to recognize the device as a keyboard, and instead it shows up as "Other") and SPP Slave mode (which uses a pre-configured PIN of 0000 but still doesn't work with the same error).
    Any ideas? It would be great to get this working, and the scanner pairs just fine with other devices (iPad, computers, iPhone, etc.)
    Aaron
    Post relates to: HP TouchPad (WiFi)

    Hi Barry,
    I've contacted Applecare and indicated the problem. I've mentioned the fact that I also tested the same wireless keyboard with a MacBook I've got and I had similar symptom while attempting to pair both.
    Suddenly the pairing worked, hence I'm suspecting a H/W issue with my keyboard, they agreed and initiated a procedure to get this keyboard replaced.
    Beside that, they confirmed that disabling the "Allow bluetooth devices to wake this computer" feature may lead to unexpected behavior, hence their recommendation was to keep it enabled.
    I'll also take a spare wired keyboard from my office, in case this problem happens again. With a wired keyboard I would have been able to plug it and enter my password to unlock the screen saver, instead of rebooting the iMac.
    Thanks for your assistance.
    nwi

  • Logitech bluetooth keyboard stopped pairing w/ MacBookPro

    My Logitech K760 bluetooth keyboard paired/worked great until roughly June 2014, but ever since then it won't fully pair.  When I attempt to connect it seems successful until the end of the process when you're asked to enter a series of numbers to fully connect the keyboard.   It either keeps spinning and never connects, or after a minute it times out and says the pairing attempt was unsuccessful. 
    I've had multiple tech support calls with Logitech and the best they can tell me is that there must have been a "program update" on Apple's end that changed the keyboard's ability to connect.  I CAN connect just fine to my iphone 5 and my ipad, so I know the keyboard is fully operational.
    My MBP is mid-2009 running on OS X 10.6.8 (I'd previously upgraded to Mountain Lion and my hard drive failed. When serviced by Genius Bar I was told not to upgrade past Snow Leopard on my replacement hard drive since it wouldn't be able to handle a higher OS, and the upgrade is actually what caused my hard drive failure).
    Any suggestions or idea would be greatly appreciated.
    Thank you!

    I got the same issue with my son's imac today. Tried everything as you have, inc pairing with my macbook. It recognised the keyboard as an other device but would not pair

  • Macbook Pro Retina and Older Bluetooth Keyboard Bug

    I have the macbook pro retina and the older full size white bluetooth keyboard.  When I wake the macbook from sleep mode, the keyboard repeats all keypress many times.  Like the keys are sticky.  Turning the keyboard off and on fixes this problem.  I am running OS X 10.8.1. 

    I have the same problem with my older white Apple Wireless Extended Keyboard, which had been working fine with my 2009 iMac. But I experience the issue sporadically with my new Mac Mini. I've read reports of people resolving some BT issues by turning off "Allow Bluetooth devices to wake this computer" in the Advanced pane of the Bluetooth System Preferenes Pane.
    There are also people having the issue on iOS devices using various Apple BT keyboards. No help, but interesting to note that it's happening across various devices, keyboard models, and OSs.

  • Sending an iMessage from my iPad using bluetooth keyboard?

    I have the Apple bluetooth keyboard paired with my iPad Air.  I've been using it in iMessage lately and unlike iMessage on OSX Mavericks, pressing the "return/enter" key does not send the message.  Is there a setting that needs to be changed so that my "return/enter" key sends the message?  Or is there a keyboard shortcut that sends the message?  Thanks!

    I highly doubt if there will be a solution for this request under Apple iOS roadmap.  I've asked the same request as you are.  No solution up to this point.

  • Lost connection to Bluetooth keyboard

    2 weeks old Intel mini. Logitech diNovo Edge Bluetooth keyboard paired just fine with the mini.
    Have not used the system for a few days. Mini goes to sleep when not in use.
    Today, the connection to the keyboard was lost. Trying to open Bluetooth preferences crashes the System Preferences application. Force-quit System preferences (had to do it twice). Turn BT off and on again. Re-try. Same thing: System Preference crashes.
    Had to restart the mini (which I HATE). Re-paired BT keyboard. Also got a weird notice that my Network location was damaged and could not be loaded (re-created network location). No idea if this is related to the BT problem.
    Hope it does not happen again, but I don't LIKE it. Any ideas?
    TIA.

    Please click and use Apple's Bluetooth Troubleshooting to re-establish the connection.

  • TS1569 My Apple Bluetooth Keyboard (2003, White) won't pair with my MacBook Pro

    My Apple Bluetooth Keyboard (2003, White) won't pair with my MacBook Pro anymore.  It seems just randomly became unresponsive.  I took them both to the genius bar and everything worked fine.  When I got home, NOTHING worked! Any Ideas??
    The batteries are fine, and it will not pair with my wife's MacBook either.

    iPhones and Macbooks cannot pair to each other except for internet sharing.
    Most Bluetooth operations between them (like Airdrop) do not require they be paired.
    What exactly are you attempting to do by pairing them?

  • Trick for Pairing Bluetooth Keyboard and Mouse With Windows 7 in BC 3.1

    My Mac:
    Mid-2007 iMac 20", 2.4 GHz; OS X 10.6.2; Windows 7 Home; Boot Camp 3.1
    My Problem:
    No matter what I tried, including all kinds of tips and tricks found in this forum and elsewhere on the web, I could not get my Apple aluminum bluetooth keyboard and bluetooth Mighty Mouse to pair in Windows 7. Windows 7's bluetooth setup panel would see them, from time to time, but never connected.
    The same pair connected quite easily with Snow Leopard, and the keyboard connected before I installed BC 3.1 in Win 7 (never did get the MM to connect in Win 7 with BC 3.0). But with BC 3.1 in Win 7, it was no dice for either one until I made an accidental discovery.
    While prepping another Apple bluetooth aluminum keyboard for my wife's Mac Mini, it was seen by my iMac's Win 7, which wanted to pair with it.
    Aha! A Big Clue! The Win 7 BC 3.1 generic bluetooth drivers wanted to pair with an aluminum keyboard that wasn't already paired with the iMac. So, I booted back into Snow Leopard, connected a USB mouse and keyboard, renamed the bluetooth mouse and keyboard, and then deleted them. I rebooted back into Win 7, then easily set up both renamed mouse and keyboard which paired quickly with Windows.
    Note that I first tried deleting them from the Snow Leopard side first, but Win 7 still wouldn't pair with them. That's when I went back to Snow Leopard and renamed them but didn't pair them with the iMac until it was booted into Win 7.
    Finally, I rebooted back into Snow Leopard and paired the keyboard and mouse with OS X. Done.
    Hope this trick/tip/hint helps someone else with keyboard and mouse bluetooth pairing problems.

    You're welcome. My discovery was quite accidental, but that's often how things happen ... if you're paying attention and are looking for clues.
    Sorry you had to trial and error before you succeeded, but as you've probably found, it is necessary to rename the bluetooth devices first, then delete them from OS X.
    I don't understand why this trick was necessary, or even what caused it to happen. I've got 6 Win 7 installations via Boot Camp on 6 Intel Macs (2 white MacBooks, 1 Unibody MacBook, a Core Duo Mac Mini, a 27" iMac and the 20" 2.4 Mid-2007 iMac). All were running 10.6.2 and Win 7 (aren't Family Packs wonderful?) via Boot Camp 3.0 more or less without problems, except as noted in my first post.
    Only the 20" iMac had problems after the Boot Camp 3.1. Not only did I have a devil of a time pairing the keyboard and mouse, but I also lost the Win 7 activation on the iMac 20" and the OS X partition started showing up as "EFI Boot". All happened right after I updated Boot Camp 3.0 to 3.1 via download from Apple while running Win 7.
    I've heard reports of other Mac users discovering Boot Camp had done a FUBAR job on their machines, but this is my first experience. My guess is that there's some dialogue going on between 10.6, Win 7 and Boot Camp that shouldn't be happening. What I really don't understand is why my other 5 Macs didn't have any problems at all with the Boot Camp upgrade to 3.1. Let's hope the Apple Boot Camp team can reverse engineer my discovery and improve the next version of BC.

Maybe you are looking for

  • Multiple apps crash after 10.7.1

    Hello everybody, I am having some difficulties after upgrading to 10.7.1. It seems that all of the standard Mac applications are running with no trouble, but I am getting immediate crashes after running the following apps (and updating them to their

  • Exception in OSM 7.0 when XSLT Automator received message from JMS

    Hi I have been prototyping on OSM 7.0 on Linux. I have a simple project, with two "Automated tasks" and some manual tasks. The first Automated task is using a XSLT Sender, and sends a message to a JSM queue "A". The second Automated task is using a X

  • "The disk you inserted was not readable by this computer". how to solve this problem?

    "The disk you inserted was not readable by this computer." this message  apear on my imac any idea how to solve this problem?

  • I miss the file msvcr80.dll

    I have had iTunes for a long time. Bought an apple tv and had to open itunes. then I couldn't because it says i miss msvcr80.dll. Where do i find it? i have tried to install itunes again but it does not work?

  • JS / forms question

    I have a <select box that will potentially have several hundred entries, populated from a SQL Server db. The value of each option will be a number, but the part that users will see is a string (person's name). In order to break up the large list of n