White bright spot on screen when displaying white or light colors

When my droid X screen is displaying all white or light colors their is a bright white sport about a inch up from the bottom of the screen in the middle. It does not appear when the colors are dark. Does anyone else this problem?

There are a couple of different issues that can cause this.  One being "Stuck" pixels, another being pressure from the battery compartment.  
Check to see if your battery door feels like it's binding or applying pressure when you slide it on and off.  If it is your battery is either not stock, or it has warped due to overheating.
As for pixels stuck, run this youtube video on your screen for a few minutes:  
WARNING! FLASHING COLOR IMAGES  
http://www.youtube.com/watch?v=Zl9BFxnPaKI&feature=related

Similar Messages

  • Why is there a white line o my screen when the screen is a darker color

    why is there a white line o my screen when the screen is a darker color

    Please post a screen shot of your display.  It will help to determine what needs to be done.
    Ciao.

  • Green-ey/White-y blotches around perimeter of screen when displaying black

    Just re-hooked up my imac g5 which i sold to my dad 9months ago - in that time he hasnt used it! i know kinda what was the point in buying it! so rather than leaving it to rot in a corner, ive set it up so that i can watch the off dvd etc... (i now use a 17' powerbook for all my work)
    i put on 24 and immedietly notice subtle light blotches around the perimeter of the screen when in black. Almost light green/white colour.
    i dont remember noticing this before... perhaps the screen is on its way out? i still have 2 months left of the apple care so at least i can get it repaired if a major problem.

    anyone got any ideas?
    to narrow it down a bit, i think its the light emission that is causing it around the perimeter of the screen.

  • Stuck white dot on corner screen when playing videos

    So when i watch a video on youtube there is a stuck white dot on the screen. It only happens when i play videos though what is this its very annoying

    Hello there, Ryanb1001.
    The following Knowledge Base article offers some great steps for troubleshooting performance issues with apps on your iOS device:
    iOS: An app you installed unexpectedly quits, stops responding, or won’t open
    http://support.apple.com/kb/ts1702
    Thanks for reaching out ot Apple Support Communities.
    Cheers,
    Pedro.

  • Apple logo bright spot on macbook pro display.

    Recently I found a bright spot just behinde the apple logo on my macbook pro mc 723 (early 2011) display...it seems that the light of the logo passes through the display...what can I do for it?! It is so bothering especially when working on a white or bright gray screen...

    Yes it it because there is a bright light behind the lid, in the room/area you are in, and it is shining through the white Logo onto the screen. Place something over the logo or turn off the light you have on behind the lid.
    EDIT:
    There is No light in the Logo. It is lit by the lights in the the screen. If you dim the screen the logo will also dim. It is because there is a bright light, floor or desk lamp, behind the screen. Turn it off.

  • Lumia 1520 bright spot on screen

    Lumia 1520 Screen error.
    Do anyone of you have the same "bright spot" issue approximately 3 cm from the top and 3 cm from the left on the screen. The brigt spot is especially visible on a blank white background.
    It does not have any practical meaning, but it is a quality issue!
    Lars Broegger,
    Denmark

    Hi,
    Thank you for the feedback. We’re continuously developing our products further and delivering updates to your Lumia. Like @adrianhughes said, it is best to visit the nearest Care Point to have your phones checked by our technicians. You may check the nearest one using this: http://www.nokia.com/global/support/locations/. Cheers!

  • Noticible blotchy spot on screen when opening....

    Hi all. I recently purchased the new Apple Ibook g4 12" 1.33ghz. I absolutely love it except for one defect....the lcd screen. When I move the top of the Ibook an any such manner (touching the white outer case ofcoarse), I notice a blotchy mark in the the turns black when in movement, almost as if a ghost puts its finger on the screen when the lcd is in movement from open to closed position. It only occurs in one spot and goes away when the screen is still. Is this a defective lcd? Should I try and get it replaced? It is annoying to see this every time the Ibook sees a little motion and do not want it to get worse. Is this the case with your screens? Thanks- Barry

    hi barry,
    I have a g4 iBook 1GHZ, (about 18 months old) and when i first got my book..... it had the same thing, the apple specialist over the phone told me to tighten the screws on the side of the case lid by the LCD..... be careful, they are those special screws so a philips will not work (cant think of the right tool) anyways tighten until tight, but not over doing it....... mine were loose, and this solved the problem, but i still think i have a defective screen all together........
    J

  • For a call screen when displaying error message screen become disable

    Hi,
    For a call screen when i am giving a error message all the other fields are getting disabled and by enter also they are not getting enabled.
    can you please suggest how to get this in enable mode with the error message.
    the error message is given if we are trying to save the duplicate record.
    Please suggest <removed by moderator>.
    BR,
    Rajesh
    Edited by: Thomas Zloch on Nov 18, 2010 4:18 PM - priority normalized

    Try:
    message 'blabla' type 'S' DISPLAY LIKE 'E'.
    Edit.
    But you should validate the key fields before even pressing the SAVE button. Use CHAIN..ENDCHAIN for the key fields.

  • Bright Spot on Screen

    I have a MacBook Pro 15 in with the LED backlight and there seems to be a small LED that is much brighter than all the others. The light is right on the edge of the screen and used to not bother me much, but now it is really starting to annoy me. Has this happened to any body else and if so is it covered under the warranty?

    This has happened to me. The good news is that they will replace your entire screen. The bad news is that you have to deal with repair. I have not had good luck. In fact, I'm on my third time trying to get a good screen. The one I sent back was perfect except for the bright spot. The second screen was horribly yellow, and the third is not evenly lit at all. They will replace it, but I do hope you get a good screen on the return model.

  • Screen goes blank in random light colors and freezes.

    So I am not sure what is happening. I have a Satellite L305 and its only recently started this. I turn on the system and it works fine, then randomly the screen shifts blank to a random color, like light tan or peach. Freezes the system and I have to force shutdown. Safe mode runs perfectly fine. I found a similar issue which exclaimed the display driver may be the problem so I installed one. It did not work. Its becoming more frequent so its harder to deal with. Does someone have a fix?

    Can you check the full model and part numbers from the label on the bottom?

  • My 30" Display can't display nice gradiants/lighter colors, am I alone?

    I am running OSX 10.3.9.
    Have a 30" ACD
    Graphics card is a GeForce 6800 Ultra
    I have tried recalibrating a dozen times, yet cannot see finer gradiants, or very light colors that appear on other machines, including Macs with 23" displays, and PC's... any suggestions?
    Dual 1.8 GHz PowerPC G5   Mac OS X (10.3.9)  

    Hi -- the standard Mac Pro should have 2 DVI outputs. One of them is dual-link and supports large displays with more pixels. The other one is single-link DVI and won't support a large display at native resolution. So try plugging your monitor into the other DVI port.

  • My ipod has a white shine on the screen when I try to use it

    My Ipod dropped and cracked a little bit about a month ago near the power button, not on the screen itself. Today when I started it up it had this white see thru haze whenever i start it up. Anyone know what could have caused this.

    Sure seems like the damage caused by the crack/dropping is progressing.However,
    Try:
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Restore from backup. See:                                 
    iOS: How to back up           
    - Restore to factory settings/new iOS device.
    If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
    Apple Retail Store - Genius Bar          
    If defective, Apple will exchange your iPod for a refurbished one for this price. They do not fix yours.
      Apple - iPod Repair price             

  • Dark spot on screen when using rear camera and phone shutting down randomly at 20% power

    I probably already know the answer to my question but my nearest apple store is 2hrs drive away so just want to know has anyone experienced the same issues and if so what was their resolution?
    I noticed last week when i went to use the camera that the phone randomly shut off even though I had near 20% batter power, it then would not switch on again without me plugging it in to charge. I am always careful with charging and discharging the battery, ive done resets and a restore but the issue is still there snd today i noticed the dark spot on the screen and subsequently on the photo when using the rear camera - its definitely not there when using the front facing camera.
    If i go to the apple store will they swap it out (still plenty of warranty)? I cant do it by post as I need my phone at all times and dont have a cc to do the express service return!!!
    Thanks in advance

    I've had this same problem. I called apple about it and they said that it seems to be a current problem with a lot of peoples phone. The only question that I have, if anyone can answer, is that Apple is supposed to send me a new phone to replace mine but I am wondering if it will be the 3G or the old model, which is what I already have. If anyone knows then let me know, but Chennie, just call apple and they will help you out.

  • What is causing a partial green screen when displaying (youtube) video (except fullscreen)?

    Hi there,
    Whenever I am watching any Youtube vids, the screen always seems like the colours are split up into a "green overlay" and the remaining colours are washed out. At the bottom of the video sits a green bar and the picture looks "double..."This is very anoying, and the problem does not happen when I use Chrome or Explorer (wich I actually do not want to use) The problem sometimes dissapears when I am watching in full screen mode
    No idea what is causing this...
    If needed I can upload a screenshot, but I am not sure how to do so here...
    Thanks for any advise that can lead to the solution...
    Cheers,
    Andy

    If you see a green square instead of the Flash player then the player failed to create an overlay and you only see the green placeholder.
    You can try to disable hardware acceleration in Firefox.
    *Tools > Options > Advanced > General > Browsing: "Use hardware acceleration when available"
    You need close and restart Firefox after toggling this setting.
    *https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes
    *https://support.mozilla.org/kb/upgrade-graphics-drivers-use-hardware-acceleration
    You can also try to "disable the hardware acceleration" in the Flash Player.
    *http://helpx.adobe.com/flash-player/kb/video-playback-issues.html
    See also:
    *https://support.mozilla.org/kb/keep-flash-up-to-date-and-troubleshoot-problems
    Flash "Display settings" window:
    *http://www.macromedia.com/support/documentation/en/flashplayer/help/help01.html

  • Qozmio blue screens when display powers down on Win 7 64 bit

    I put the latest NVidia drivers on and all windows updates are applied, but it will not turn off the display without blue screen. Running an experiment now to see if the whole computer will sleep OK.
    Solved!
    Go to Solution.

    Qosmio X505-Q875
    Downloads here.
    drivers from NVidia site
    This one has an easy solution.
    If you want your laptop to work right, never get device drivers from the device maker - and don't get them from Microsoft's Windows update either. Get them only from Toshiba. It's because laptop designers often tweak the chips/circuits and associated drivers.
    You'll find that Toshiba does not update video drivers unless bugs are found. That makes some unhappy - maybe you.
    -Jerry

Maybe you are looking for

  • Catch the Excep while clicking on a button and display the msg in JSF UI

    Hi, I am facing a issue like i have a add button in my JSF page which will add Partner code, Partner name,etc.., If i give the same partner code and partner name second time it is throwing the duplicate key exception org.apache.myfaces.component.html

  • Sound randomly goes on and off on my IMac

    I have a 2006 IMac that works perfectly except for one thing. One day last year out of the blue the sound stopped working and I would get the 'not allowed' circle when I tried to adjust the volume. the problem persisted for a week or so, then the sou

  • Do you know a VI or a mean to remove plots from a graph?

    I'd like to remove plots from a graph and i know their x-cordinate do you know a VI or a mean to remove them? Thank you for yours answers.

  • [SOLVED] An offlineimap question

    Greetings, I am trying to set up offlineimap with a Gmail account. Due to a network issue during the initial sync, I was only able to download ~50% of the mail stored with Google (I had to SIGINT, since offlineimap didn't seem to recognize that the h

  • Error in new infotype creation

    hi, i m copying a infotype and create a new infotype, in this all structures are copied in my program but only one structure q0002 is not copied as q9002 . tell me how to do this