White corners with flashing "REC" home video style filter?

I'm looking for a template or some type of filter to put over a few video clips to make them look like home video - with the white 'photo' corners and a flashing 'REC' symbol in red or similar in one of the top corners.
Is there a place where I can get this?
Ideally if it would change the quality of the video to make it look more home video like it would be ideal, but not essential
Anyone have any ideas?
Thanks

This can be done within FCE.
Effects>Video Filters>Video>Viewfinder.
Stylize>Add noise. Or similar filter, there are plenty to choose from.
Once the filters are applied open the Filters Tab in the Viewer to manipulate them to suite your taste.
Al

Similar Messages

My macbook pro has white screen with flashing folder.

my macbook pro has white screen with flashing folder.
i called the repair services and they say its hard disk problem
so i would like to ask everyone here if the problem would be solved if i just changed the original hard disk to a ssd myself or do i realy need to let them repair for me.
ps : i dont have warranty

See A flashing question mark appears when you start your Mac. I would suggest you try reinstalling OS X.
If you are running Snow Leopard:
Reinstall OS X without erasing the drive
1. Repair the Hard Drive and Permissions
Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
2. Reinstall Snow Leopard
If the drive is OK then quit DU and return to the installer. Proceed with reinstalling OS X. Note that the Snow Leopard installer will not erase your drive or disturb your files. After installing a fresh copy of OS X the installer will move your Home folder, third-party applications, support items, and network preferences into the newly installed system.
Download and install Mac OS X 10.6.8 Update Combo v1.1.
If you are running Lion or Mountain Lion:
Reinstalling Lion/Mountain Lion Without Erasing the Drive
Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the main menu. Repair the Hard Drive and Permissions as follows.
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu.
Reinstall Lion/Mountain Lion: Select Reinstall Lion/Mountain Lion and click on the Continue button.
Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.

White screen with flashing file icon with question mark mean

What does this mean. We are getting a white screen with flashing file icon with question mark inside the file.

It almost certainly means it can't find a bootable volume (one with OS X on it).
Which means most likely you will have to find your original system installation DVD and install it. Then you should figure out what caused the problem.
Read this to diagnose it before resorting to reinstalling the OS:
http://support.apple.com/kb/TS1440
Excerpt:
Additional steps
If your Mac still starts to a flashing question mark, follow the steps below. If any step resolves the issue, you don't need to continue to the next one.
Select your Mac OS X startup disk with Startup Manager by restarting and holding the Option key. After your Mac starts up, restart again to verify that the flashing question mark does not appear.
If the issue persists, insert your Mac OS X installation disc. Be sure to either use the disc that came with your Mac, or, if you installed a later Mac OS X version from disc, use the newer disc.
MacBook Air note: On a MacBook Air, there are two options for starting up from Mac OS X media: Either connect a MacBook Air SuperDrive to the MacBook Air via the USB port and restart the computer, holding down the C key during startup, or use Remote Install Mac OS X to startup from a system software DVD that's located on a partner computer. Once started up from Mac OS X media, skip to step 3.
Restart the computer, then hold the C key during startup.
From the Utilities menu, choose Disk Utility. Don't click Continue.
Select your Mac OS X disk (named "Macintosh HD" by default) in the left side of the Disk Utility window.
Click the First Aid tab.
Click Repair Disk to verify and repair any issues with your Mac OS X startup disk.
After repairing the disk, try to start up normally.
Important: If Disk Utility finds issues it cannot repair, you may need to back up as much of your data as possible (or use Time Machine to back up to a different disk), then erase the disk and reinstall Mac OS X. You should back up important files and data before erasing a drive. Erasing deletes everything on the hard disk (including things on your desktop). Also, you can install Mac OS X onto an external disk, start from the external disk, and use Migration Assistant to transfer items from your usual internal Mac OS X startup disk to the external disk, then erase the internal disk and reinstall Mac OS X.
If the issue persists, and Disk Utility didn't find any irreparable issues, quit Disk Utility, quit the Installer, select your disk when prompted, and restart.
If the issue continues, reset PRAM. Note: After resetting PRAM, if the computer starts up normally, reselect the startup disk in the Startup Disk preferences.
If none of these steps resolve the issue, start up from the Mac OS X Installation disc and reinstall Mac OS X.

Got a white screen with flashing file icon

Why do I have a white screen with flashing file icon with question mark inside?

It means your iMac cannot located a valid system to boot.
Insert the CD that came with the iMac and allow it to boot. Once it gets the point where it's offering to install the OS, go to the top menu and choose diskutility. Perform a repair on the main drive "Macintosh HD".

White screen with flashing question mark

AAll I get is white screen with flashing question mark. I've inserted OS disc but it won't run. Can anyone help plz?

A flashing question mark or globe appears when you start your Mac

I have tearing with flash and Youtube videos.

First, my specs.
Windows XP
Quad Core
Nvidia 9600gt DDR3
2GB RAM
Browsers: Firefox 3.6.12 and IE7
I have the newest Nvidia Drivers and Adobe Flash 10.1
Well the problem is that I have tearing with flash and videos in Windowed Mode, if I turn the full screen option there is no sign of tearing BUT only if I have hardware acceleration turn on.
So the problem is, why I have tearing in windowed mode?

Same here. I am not getting 'what tearing' is all about. Can u please explain?

My 14.1 firefox , websites with flash contain or videos don't work & youtube give me a message "an error occurred please try again later"?

'''Hi,
my 14.1 firefox , websites with flash contain-like game website - or videos don't work & youtube after I press the play button give me a message say "an error occurred please try again later", I 've tried to reload the flash again but nothing seems to work out?
Thank u..'''
''Duplicate post, continue here - [https://support.mozilla.org/en-US/questions/934607]''

Can you open up your Real Player and tell me what version you have? I think Real Player 15.0.6 is supposed to fix this problem. There was a conflict between Real Player and Flash this whole summer that broke Flash videos. Real Player released a update that might help in your case.
If that doesn't help, I think a addon might be to blame here. So do this:
<br> '''Firefox button <img src=https://support.mozilla.org/media/uploads/images/2012-03-27-09-22-48-1204f1.png> > Help > Troubleshooting Information'''
<br> (or '''Tools > Help > Troubleshooting Information''')
Then click the "Copy all to clipboard" button then paste it here. It will tell us what addons you have installed and I can see which one might be causing problems.

MacBook Pro can turn on and off, but does not start up. Stays on white screen with flashing folder icon, does not go to desktop.

MacBook Pro is not starting up. It just stays on a white screen with a flashing folder icon. Have tried restarting while holding the Option key, and the cursor becomes visible and movable, but it does not go to the desktop.

Hello Sonya_Rose,
I found this article when researching the issue you describe here named A flashing question mark appears when you start your Mac found http://support.apple.com/kb/ts1440.
Check the mouse and keyboard
This issue might occur if a mouse or trackpad button is pressed during startup. Make sure the button isn't pressed.
If the issue persists, shut down your Mac with its power button, disconnect any external mouse and keyboard, then turn on your Mac with its power button. If the flashing question mark issue persists, reconnect the keyboard and mouse.
Additional steps
If your Mac still starts to a flashing question mark, follow the steps below. If any step resolves the issue, you don't need to continue to the next one.
Select your Mac OS X startup disk with Startup Manager by restarting and holding the Option key. After your Mac starts up, restart again to verify that the flashing question mark does not appear.
If the issue persists, insert your Mac OS X installation disc. Be sure to either use the disc that came with your Mac, or, if you installed a later Mac OS X version from disc, use the newer disc.
MacBook Air note: On a MacBook Air, there are two options for starting up from Mac OS X media: Either connect a MacBook Air SuperDrive to the MacBook Air via the USB port and restart the computer, holding down the C key during startup, or use Remote Install Mac OS X to startup from a system software DVD that's located on a partner computer. Once started up from Mac OS X media, skip to step 3.
Restart the computer, then hold the C key during startup.
From the Utilities menu, choose Disk Utility. Don't click Continue.
Select your Mac OS X disk (named "Macintosh HD" by default) in the left side of the Disk Utility window.
Click the First Aid tab.
Click Repair Disk to verify and repair any issues with your Mac OS X startup disk.
After repairing the disk, try to start up normally.
Important: If Disk Utility finds issues it cannot repair, you may need to back up as much of your data as possible (or use Time Machine to back up to a different disk), then erase the disk and reinstall Mac OS X. You should back up important files and data before erasing a drive. Erasing deletes everything on the hard disk (including things on your desktop). Also, you can install Mac OS X onto an external disk, start from the external disk, and use Migration Assistant to transfer items from your usual internal Mac OS X startup disk to the external disk, then erase the internal disk and reinstall Mac OS X.
If the issue persists, and Disk Utility didn't find any irreparable issues, quit Disk Utility, quit the Installer, select your disk when prompted, and restart.
If the issue continues, reset PRAM. Note: After resetting PRAM, if the computer starts up normally, reselect the startup disk in the Startup Disk preferences.
If none of these steps resolve the issue, start up from the Mac OS X Installation disc and reinstall Mac OS X.
Regards,
Sterling

Gut white screen with flashing apple and circle/warning sign on white screen when i turn on the computer

When i turn on my computer, i get only a white screen with a gray apples in the middle, flashing, alternating with a ghostbuster-type warning. Never get to the galaxy screen. Just happened today.

Did you setup a lock code? I have done this operation via iCloud just few minutes ago and it's booted with 4 numbers lock code just fine. When you lock your Mac, it's restarts automaticly and then loads with lock screen and you are only able to enter password of 4 numbers to unlock it.

Can't log in white screen with flashing file and Question mark

I've been have trouble with getting on line and screen freezing up. Now I have a solid white screen with a icon of a file and question mark on it flashing. Iv tried unplugging and resetting with no luck.

Have a look at > A flashing question mark appears when you start your Mac
Dennis

White screen with flashing file with ?

had trouble with iMac not booting up. Read disk and did the hold the D down at start up. fixed the problem for about 30min. then got the gray screne that said I needed to shut down and restart my iMac. Did as told now have a white screen with blinking file with ? on it.
new to mac not sure what OS X I have.
Please help, thanks

Thanks for your help ok I got more infor off my iMac
It is
iMac5,1
OS X 10-6.3 but I put snow leopard on it
2.16 GHZ intel Core
16B 667 HHZ DDR2 SDRAM
The problem started about two weeks ago but I have been away from home to try to fix it. My son has informed my that you can be working on the computer when screen becomes shadded over then that message in a large squar come up that saids You need to turn off your computer by holding the button till all turns off the push the button again to turn it back on.
I have done this and that when the white screen with the blinking file with ?. If you turn off the computer for a few hours it might start back up but some times you just get a white screen like it is trying to log on but never does. you just have to turn the computer off again.
When it does come back up it works great for about an hour then the same thing happens again.
please tell me it something simple

Getting a white screen with flashing ? folder.

Computer was humming, it got really loud. Computer froze so I turned it off on the back. Once turned on it gives a white screen with a flashing folder in the middle with a ? on it. This can continued through turning it off several times. Not sure what my next step should be?

Here is some information and troubleshooting steps to start with:
http://docs.info.apple.com/article.html?path=Mac/10.6/en/8966.html
https://support.apple.com/kb/TS1440
To summarize, the question mark usually indicates that it cannot find a startup disk. One of the steps involved will be to start from the install disk and repair your hard disk, so - if you can - make sure that you have your important data backed up before starting with any of these tips.

White screen with flashing folder containing a question mark

I attempted to boot my MacBook and it is now only showing a white screen with a folder containing a question mark. I have only had the MacBook for less than 3 months. Help!!!!

There are four general causes of this issue:
1. The computer's PRAM no longer contains a valid startup disk setting when there aren't any problems with the disk itself. This can be checked for by pressing the Option key and seeing if the drive appears.
2. The internal drive's directory structure has become damaged. This requires usage of an alternate bootable system to perform the repair.
3. Critical system files have been deleted. This requires usage of an alternate bootable system to reinstall them.
4. The internal drive has died or become unplugged. This is the most likely case if the computer took a sharp impact or there are unusual sounds coming from its location.
(102241)

White screen with flash video

In Dreamweaver 4, I get a white screen after adding Flash Video to my webpage. All browsers show white screen in Preview, too.

Flash (if you get it to work) isn't supported by the world's most popular web devices: iPhone, iPad, iTouch, Android and others... You'll reach a much wider audience if you convert your video to MP4 and use an HTML5 player.
http://www.pickleplayer.com/
http://flowplayer.org/
http://www.longtailvideo.com/jw-player/
Or, upload your native video to YouTube or Vimeo video sharing sites. Let them convert it & carry the bandwidth for you. Then, copy & paste their embed code into your HTML pages.
Nancy O.

White screen with Flash on YouTube in Google Chrome...

I have the Netbook version of Ubuntu Maverick Meerkat and installed Google Chrome stable. I installed the latest version of Adobe Flash.
Here is the behavior:
1. YouTube videos appear as a white screen when embedded on the page in Chrome. I hear sound.
2 The video is normal when I switch to full-screen mode.
3. HTML5 videos display normally in Chrome
4. Firefox displays YouTube videos without any problem.
5. Ubuntu Lucid 10.4, with the same software components, displays YouTube video in Chrome without problems.
Any thoughts on correcting this odd problem?
Thanks!

i'm not able to reproduce your issue.
downloaded ubuntu-10.04-netbook-i386.iso and did a fresh install on a dell inspiron mini netbook
installed the latest google chrome deb package 5.0.375.70
all videos that i've tried played fine. i'm actually pretty amazed at this netbook version of Ubuntu. it's pretty exciting.
i've also, applied all updates and enabled new device drivers and video remains playable.
maybe i'm not hitting the correct videos? would you mind to...
1. verify and compare your chrome version to the one noted above
    - if not install the latest from http://www.google.com/chrome/eula.html?hl=en&platform=linux_ubuntu_i386
2. verify the flash player version installed (nav browser to http://www.adobe.com/software/flash/about/)
3. apply all updates System>Adminstration>Synaptic Package Manager
4. supply a url link to a sample video that does play visually
if the above do not help:
5. send your harware configration and
6. the output of the following command, glxinfo:
    - open Accessories>Terminal
    - type: sudo apt-get install mesa-utils
    - type: glxinfo > ~/Desktop/glxinfo.txt
note: the file, glxinfo.txt will write to your Desktop

White corners with flashing "REC" home video style filter?

Similar Messages

Maybe you are looking for