White death screen- unlocked iphone 3g

I'm on T-mobile and have an unlocked iphone 3g. Something must have happened to it last night because it was working fine, then I picked it up to make a phone call and the white screen of death appeared.
i can receive calls, texts, etc, and all of the buttons work, but restarting it and plugging it into my computer doesn't make the screen come back at all. I can't update or restore it on iTunes because it's unlocked/jailbroken.
i've read that a lot of people have said they went to the genius bar and just got a connector cable reset, but my iphone is jailbroken and unlocked. will they help me at all if i bring it there? I'm not under apple-care and don't have a warranty or anything, but I've read so much that its a simple fix. TIA

You're going to be on your own as there is no support for hacked/jailbroken idevices from Apple or here.
You could take it to an Apple store, and they may help you however they will restore the iPhone to the most recent firmware (iOS4.1) and you will loose the jailbreak and the unlock giving you an AT&T iPhone.
Try Google...

Similar Messages

  • Ipod 4th gen white death screen

    my ipod 4th gen has a problem .it is white screen of death.....i have done the hard reset but hasnt helped me with it. please could u give me solutions for the problem.

    Try:
    - iOS: Not responding or does not turn on
    - Try using this program to place the iPod in recovery mode
    RecBoot: Easy Way to Put iPhone into Recovery Mode
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try on another computer
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
      Apple Retail Store - Genius Bar
    What happened when you placed the iPod in DFU mode and then restored?

  • White flare when unlocking iPhone via TouchID

    Hi there...
    I just noticed that every time I unlock my iPhone 5s via TouchID there is a white flare at the top left of the screen.
    The flare is definitly software-related an not a hardware problem - as I am able to screenshot it using iOS.
    I tried to reboot the phone, close all apps, disable and re-enable TouchID, change contrast and so on. I did not restore my iPhone yet - I hope there is another solution.
    Anyway, does anyone maybe has a helping tip for me? My iPhone is currently running iOS 7.0.4 - the flare only displays when using TouchID. When unlocking via passcode or 'slide to unlock' it does not show.
    Thank you all and have a nice day.
    Steve

    Ok, I found the problem by myself and it seems to be a bug in the firmware:
    If the 6th icon on the homescreen has a relatively long caption then the problem appears. I for myself have the reminders there BUT my phone is set to German so it says "Erinnerungen". I also tried it with the settings app which says "Einstellungen" in German.
    I reported the bug 15533799.

  • Why does the screen unlock when using voice dialer on iphone 5S?

    Here's the scenario I'm referring to:  my iphone is in my pocket with the screen locked and headphones plugged in. I toggle the mic switch and use voice control to place a phone call. On every other iphone I have owned, the screen stays locked. On the 5S, the screen unlocks when the call begins, making the end call button or other phone buttons able to be activated accidentally by my leg.
    Why did they change this feature on the 5S?  The iphone 5 stays locked in the same scenario. Just updated to 7.0.4 and it still hasn't been fixed. Is there a way to fix this issue?

    Close all open apps by double-tapping the home button, then swiping up and off the screen with the app window (not the smaller icon).
    Reset your device: hold down the home button along with the sleep/wake button until the screen goes black and you see the Apple, then let go. (No data loss)

  • White screen on Iphone 3Gs

    Any solution for the below problem I am facing
    Always getting a white blank screen.while restarting no apple logo, while charging black display. Tried restoring using itunes. Still the same. Any solution

    Hi I am having the same problem with my iphone 3gs
    pls advise if you have found a solution
    thanks
    dhananjayan

  • Can't start camera from unlock screen in iphone 5c since ios8

    Hi!
    Some I can't start the camera from the unlock screen in iphone 5c since ios8 update.
    It works a couple of hours after reboot, but the problem keeps turning back randomly.
    After iOS8 update I also installed facebook, facebook messenger, linkedin and sync.me and configured skype.
    The actions are:
    Enabling the unlock screen and then sliding up the camera icon, it seems to appear a camera captured image but then the screen turns black or greyish (randomly) like the unlock screen background.
    The problem doesn't happen from the control center panel locked or unlocked.
    It isn't a big problem because there are simple workarounds, but it's annoying when it happens.
    Best regards,
    Bruno.

    This problem seem to have been solved in iOS 8.0.2.

  • My iphone 5 suddenly has a white blank screen,  no liquid contact or history of fall, what can i do with this problem?

    my iphone 5 suddenly has a white blank screen,  no liquid contact or history of fall, what can i do with this problem?

    Hey there Galileo,
    It sounds like your iPhone screen is solid white and you cannot do anything with it. Take a look at these steps from the following article about that kind of issue:
    Get help with the screen on your iPhone, iPad, or iPod touch
    If you see a solid color screen (black, white or blue)
    Plug in your device to a power source. If you see the low-battery screen when you plug in, let your device charge for at least 10 minutes (20 minutes for iPad) before using it.
    Reset your device while it's plugged in.
    If resetting doesn’t fix the issue, restore your device.
    If you still see the issue after you restore, contact Apple Support.
    Thank you for using Apple Support Communities.
    Regards,
    Sterling

  • I have an unlock iphone 4s that i buy it not from apple store can and i broke the screen can i repair the screen i apple and how mich is it if yes??

    i have an unlock iphone 4s that i buy it not from apple store can and i broke the screen can i repair the screen i apple and how mich is it if yes??

    Not covered by warranty. If you make an appointment at an Apple store, you will be offered an out of warranty replacement. Cost is US $199 for an iPhone 4S.

  • WHITE SCREEN IN IPHONE

    hey,
    i have iphone 3gs.
    and after i opened it now white screen.
    i iphone itself works it recieve calls but the screen is white.
    i'm almost sure that i didn't cause damage to internal parts and cables.
    restire can solve the problem? or should i buy new lcd?
    thanks

    Perhaps, the ribbon cable of display might have broken. See closer safely. If it is you will see small crack cross the cable. Then replace a new display carefully.

  • Have white screen on iPhone 5 after it started and worked for over 10 hours

    Have white screen on iPhone 5 after it started and worked for over 10 hours

    So now that I have joined the community, I can see this question was asked before.... so I think I have my answer
    It just takes a loooooong time

  • HT4137 help! techo phobe online. I have an unlocked iphone 3 with an unlocked sim. i have plugged the phone into the computer to set up itunes, but it just says on the phone screen "connect to itunes" nothing else is happening/

    help! techo phobe online. I have an unlocked iphone 3 with an unlocked sim. i have plugged the phone into the computer to set up itunes, but it just says on the phone screen "connect to itunes" nothing else is happening/

    Sounds like the device was dropped at some point and damaged as a result.
    Take it to Apple for evaluation and a replacement.

  • Customizing unlock screen (official iPhone SDK)

    Hi,
    I want to write a small application, that implements a customized unlock screen on iPhone. Is there a way to do it using standard iPhone SDK?
    Thanks a lot for a clues
    Nava

    I tried the following :
    NSError *error;
    NSArray *paths = NSSearchPathForDirectoriesInDomains(NSDocumentDirectory, NSUserDomainMask, YES);
    NSString *documentsDirectory = [paths objectAtIndex:0];
    NSString *path = [documentsDirectory stringByAppendingPathComponent:@"export.csv"];
    if ([records writeToFile:path atomically:YES encoding:NSUTF8StringEncoding error:&error] == NO) {
    UIAlertView *alert = [[UIAlertView alloc] initWithTitle:@"Export error" message:@"An error occured while writing the file."
    delegate:self cancelButtonTitle:@"OK" otherButtonTitles: nil];
    [alert show];
    [alert release];
    static NSString *email = @"[email protected]";
    NSString *outMailtoPath = [NSString stringWithFormat:@"mailto:%@?subject=Review&body=%@&attachment=%@", email, @"test", path, nil];
    NSURL *url = [NSURL URLWithString: [(NSString *)CFURLCreateStringByAddingPercentEscapes(NULL, (CFStringRef)outMailtoPath,NULL,NULL,kCFStringEncodingUTF8) autorelease]];
    [[UIApplication sharedApplication] openURL:url]

  • Good morning friends, I have a problem with my iphone 4s since I get a screen that just light it says "Activation Required" restored it and not corrected, I bought my factory unlocked iphone, how I can fix this, I had installed the version 6.0 as develope

    Good morning friends, I have a problem with my iphone 4s since I get a screen that just light it says "Activation Required" restored it and not corrected, I bought my factory unlocked iphone, how I can fix this, I had installed the version 6.0 as developer to

    If you have a beta copy of iOS6
    1. You are a developer and will know how to transition from beta
        to release version and to use the Develpoer forum
    2. You have a pirate copy of the beta and no-one on this Apple hosted Forum can help you
         try Google

  • AT&T SIM card in unlocked iPhone 4 brings up emergency screen

    Okay, so I bought an unlocked iPhone 4 in Canada (where I live)... came down to Florida for a few weeks and decided to pop in an AT&T GoPhone SIM card (pay as you go) after reading/watching the how-to process online. I should also mention that I cut my Rogers SIM card down to a micro SIM manually and had much success, so I cut the AT&T card the very same way; however, when I insert at AT&T SIM card into my iPhone, it switches to the "Slide for Emergency" screen, wanting me to connect to iTunes. In all the videos and walkthroughs I've gone through, no one has had to deal with this problem. Anyone have an idea why this is happening?

    No you won't. Unlocking the GSM side of a Sprint phone will let you use carriers in other countries but not domestic carriers.

  • HT4623 hi i have an iphone 4s and has not been a year yet no water damage but there is a white cloudy screen around the edges and will start going crazy with different colors and all someone please gel what is wrong with it?

    hi
    i have an iphone 4s and has not been a year yet no water damage but there is a white cloudy screen around the edges and will start going crazy with different colors and all someone please gel what is wrong with it?

    I switched the usb port and did the whole recovery holding of the buttons ect... And it worked, the computer detected the phone and i was able to click restore. However, the computer says preparing iphone for restore and it is still doing the restarting thing where the apple fades away and then comes back like it is restarting. If i can somehow get past this i will be able to go back to factory settings and resolve my problem, but this is where i am stuck.

Maybe you are looking for

  • Please help me with standard SAP Report for expired stock

    Dear all, Please let me know which all things should maintain in material master to get expired stock. I have used MB5M which gives me days in  which material is goin to expire. But i need to know materials which already expired in particular plant.

  • My iMac no longer recognizes my Western Digital external HD

    My external Western Digital MyBook hard drive can no longer be mounted.  This problem seems to have started occurring after I upgraded my OS to 10.5.8 (my best guess).  Have had the drive for 2 years and no problems up until now.  I connect the drive

  • [Flex 4.5.1] How does Button's fontSize property gets applied to labelDisplay?

    How does Button's fontSize property gets applied to labelDisplay when lableDisplay's fontSize is not explicitly set. I just tested it it works but I don't know how. I looked through the ButtonBase class but I don't see any code applying the fontSize

  • Having issues finding out how many bytes are sent/recieved from a socket.

    Hello everyone. I've searched the forums and also google and it seems I can't find a way to figure out how many bytes are sent from a socket and then how many bytes are read in from a socket. My server program accepts a string (an event) and I parse

  • Suddenly stopped working

    i get the error "there was an error while loading the plug-in 'papermetadata.api'. the plug -in failed to initialize. then it says it encountered a pblm and needs to close AppName: acrobat.exe AppVer: 6.0.0.878 ModName: unknown ModVer: 0.0.0.0 Offset