White flash inexplicably appears in photo slideshow

In iMovie, the white frame does not appear at all, but when the slideshow is imported into iDVD, it shows up in the slideshow. I removed the clip before and after it, and put the new photos and title slide in, and it still appeared in iDVD. Any solutions for this problem?

Your best bet is to search Google using "AS# slideshow tutorial", replacing the # with 2 or 3 depending on which version of actionscript you plan to use.  You are not likely to find one exactly like that one, so you should look for one that behaves similarly in some way and then figure out how to change it to be what you want.  My guess would be that most you might find that have automatic slide changes might change them horizontally, or might just fade one in atop another, so if that is all you can find, then you just need to figure out how to adapt it to work vertically instead.

Similar Messages

  • Controlling the Photo Slideshow thru a remote

    I have my itouch hooked up to my tv via the docking station and the composite av cables. I want to know if there is a way to have the little white remote control (advance, pause, etc.) the photo slideshow. Right now if press those buttons during the photo slideshow, it just starts controlling the music.
    Please let me know if there is a way to change it to have the white little remote control the photo slideshow.
    Message was edited by: SmileGuy

    No, sorry.

  • When I open Iphoto, I see all my photos for a second and then they disappear and only a white dotted box appears.  Then I click on it and for photos is a triangle with an exclamation point.  It doesn't happen to all but quite a lot. how to I get them back

    When I open Iphoto, I see all my photos for a second and then they disappear and only a white dotted box appears.  Then I click on it and for photos is a triangle with an exclamation point.  It doesn't happen to all but quite a lot. how to I get them back

    Have you recently deleted photos using the finder or run clean up software?  Is so restore your backup
    If not the backup your iPhoto Library and launch iPhoto while depressing the option and command keys. Rebuild your database
    LN

  • Hi , clicking photos using falsh are all white flashed..

    this is the new phone I got today(just upgraded to ios 4.3.3)
    everytime I click photos using flash they are come up white with excess white flashed cant even see the actual picture
    is this because os upgrade? can someone please help

    It was my pleasure. 

  • Only white square box appear when taking photo using camera

    Hi,
    Anybody who can help me. When I take photo, all that appears in photo roll is just empty square box and cannot even save any taken photos.
    Please help

    Hey,
    If you can't see the photos when you tap them, there may be a case or protective film covering the iPhones camera. Try testing after removing any 3rd-party accessories.
    If the issue persists after removing the case try resetting or restoring the iPhone.
    You can reset the iPhone by holding the Home and Sleep/Wake buttons until you see the Apple logo as described here: http://docs.info.apple.com/article.html?artnum=305743
    This article: http://support.apple.com/kb/HT1414 will walk you through restoring the iPhone.
    -Jason

  • Variations of colored dots appear on photos after updating iphoto

    After installing OS X Mavericks and updating iPhoto, I noticed that all of my photos appear to have small little dots that are different colors. I can zoom into the images and if I was to edit the photos and choose enhance, the dots end up enhanced and larger. I've exported an image from iphoto and saved it as a jpeg, when hitting the space bar to preview the image, the image has white blocks covering the whole photo. I know that with the previous version of iPhoto my images didn't show anything like this before. Something very strange is going on and I'm concerned my photos are corrupt. I've included a couple screen shots of the problems.

    That's an indication that the link/file path between the thumbnail and original file has been broken.
    If you have the space available on your hard drive and don't aready have a backup copy of the library make a temporary, backup copy (select the library and type Command+D) and apply the two fixes below in order as needed:
    Fix #1
    Launch iPhoto with the Command+Option keys held down and rebuild the library.
    Select the options identified in the screenshot. 
    Fix #2
    Using iPhoto Library Manager  to Rebuild Your iPhoto Library
    Download iPhoto Library Manager and launch.
    Click on the Add Library button, navigate to your Home/Pictures folder and select your iPhoto Library folder.
    Now that the library is listed in the left hand pane of iPLM, click on your library and go to the File ➙ Rebuild Library menu option
    In the next  window name the new library and select the location you want it to be placed.
    Click on the Create button.
    Note: This creates a new library based on the LIbraryData.xml file in the library and will recover Events, Albums, keywords, titles and comments but not books, calendars or slideshows. The original library will be left untouched for further attempts at fixing the problem or in case the rebuilt library is not satisfactory.

  • Safari white flash before loading a darker color page

    Hi,
    I wonder if this can be improved: my website's pages (in frames) have a grey background set and an additional grey image on top. In Netscape-Seamonkey, they load fine in grey color. In Safari however, there is an annoying white flash between two pages. Is there something that can be done about it? Thanks!
    Paul

    >So, when you load the pages directly ... no white flash
    I maintain actually another website, built on the same frame set (www.schilliger.com). It has only about 30 pages and they are mostly accessed by links located on the left frame. Once the first page has loaded with a white flash, then further browsing is without this annoying effect. Why it persists on the photo website is a mystery...
    >Or, you might decide that its not worth it, and not enough users will see this as to make it a priority issue (as it initially appears to be Safari-only).
    It's been this way for years probably. I seldom use Safari so I did not notice until the other day. And it's quite possible that I already asked the same question a few years ago but did not find a solution... Not a big issue in any case.
    Thanks to All for the brain storming around this question!
    Paul

  • How to create a photo slideshow in my movie

    Hello all,
    Im woking on my first movie with Premier Elements 12 and I can not figure out how to include a slideshow of pictures at the end of my movie.
    Of course I can drag the photos on the timeline and use trancients in between but there is nothing I can do with the picture like editting/cut parts off, make them black/white and use movement effects for example.
    Isnt this an option/included in Premiere lements 12 ?
    I just bought the software but also played around with the trial of Cyberlink Powerdirector which has this handy magic function to select all pictures at once and create different/random trancirents and effects and pictures could be editted also.
    This is what Im after but I can not find how to do this stuff in Premiere lements 12.
    Hope someone can help me out.
    Thatnks in advance

    AlexSan
    Do you have Photoshop Elements 12 as well as Premiere Elements 12?
    What is this "movie" that the photo slideshow is going to be at the end of? A video? If so, what are the
    properties of that video...video and audio compressions, frame size, frame rate, interlaced or progressive, file extension, pixel aspect ratio?
    What is your intended final product...DVD-VIDEO standard or widescreen on DVD disc, AVCHD on DVD disc, or Blu-ray disc format on Blu-ray disc?
    With the above information, I will suggest some approaches that you might want to look into.
    Thanks.
    ATR

  • Black screen with white flashing line on startup

    ~computer info~
    Mac OS X Version 10.6.7
    2.66 GHz Intel Core 2 Duo
    4GB 1067 MHz DDR3
    24 in. Montior
    Startup disk: Macintosh HD
    ~Partition info~
    FAT32 Windows XP
    ~issue~
    Hello; I've recently encountered a problem with bootcamp that I can't find a solution to... Every time I start up the computer in boot camp, all I get is that black screen with the white flashing line. It comes up, goes to a plain black screen, then quickly comes up again. It never stops, either. I've let it run, and it won't finish.
    I've had the partition for MONTHS now, and nothing like this has happened. I've had it since I upgraded to Snow Leopard awhile back, and needed to re-partition the drive. I literally had been using it the day before it happened, and the only thing that happened was that I got that "Windows Security 2011" malware, but I got rid of it fully (As I've gotten it 3 times this month). The other two times I got it, it didn't do anything. I fixed it, and went on with life. But is it possible that it broke something in the partitions inner files this time?
    I ran disk utility, and it said the partition was broken. After verifying it and confirming this, I did "Repair Drive", as it allowed me to. It finished with no errors and said it completed, so I tried to go back into the partition, but it gave me the same results.
    To be honest, most of my stuff is on my External Harddrive, so re-doing the partition is only going to be time used to me. But I still DO have things on there, and it'd be a pain to transfer them back and forth between the Mac and Windows partitions... I'd really like to know if there's anyway to fix this, or if it's just going to fall back to me re-partitioning the drive...
    Thanks for the help in advance.

    That blinking line is a "cursor."  It's only supposed to show for a second or two as your iMac switches to and then starts Windows.  But as you indicate here, it's not getting past the cursor..
    Disk Utility can repair FAT volumes, but it cannot correct issues caused by corrupted items which, if the volume was repaired, there may be some.
    Since we are dealing with a Windows boot partition, it's entirely possible that the repairs inadvertently corrupted the data Windows needs to start and run.  It's also posible that Mac OS, in fixing the Boot Camp volume, overwrote the existing boot record in the Windows partition with a generic, though non-bootable version.
    Windows' own CHKDSK should have been used to make the repairs rather than the OS X Disk Utility, which would have avoided this worst-case scenario in data recovery.  CHKDSK has a special version of itself on the Windows disc, which may be accesed by using the Windiws Recovery Consile upon pressing R during the "Welcome to Setup" screen.
    Though it appears ftom my position here that you will need to reinstall XP, it may yet be possible to recover data that hasn't been copied to the external HDD.  For this task, I'd like to recommend that you start up in Mac OS for the time being, and pull any new or changed items from the Boot Camp volume except for installed software; the latter are nearly impossible to transport with reasonable accuracy, and should instead be reinstalled.
    Once you have what you need, format your Boot Camp volume and reinstall Windows, this time selecting NTFS as your filesystem.  NTFS is the preferred option for Windows in general, thiaks to its innate file access controls as well as the ability to compress or encrypt data "on the fly."  NTFS can be read by Mac OS X, but not written from it, thus NTFS volumes cannot be altered except by Windows itself..  But it is also a requirement if you plan to upgrade your unit using Windows 7 in future.
    Nate

  • How do I making a photo slideshow then subsequently buring to DVD?

    I have just purchased PSE Premier 12 thinking I could make a photo slideshow then burn it to DVD. However it appears that I can only make a video/movie type presentation which results in terribel graphics (blurs what are actually very sharp photos) and will not allow me to specify the transition time between photos. Would appreciate some help here or have I got the wrong product? thanks.
    Toucan

    finno2010
    Title Issue apparently in Quick Workspace
    Let us assume that you have 4 photos that are already in the Quick Filmstrip scene spaces 1, 2, 3, and 4 and that you want a title page before photo 1 in scene space 1
    Text Menu/New Text/Default Text
    Create your title in the Titler, note that the title is automatically placed in the text bar as a purple bar.
    With the mouse cursor, left click and drag the purple bar down and to the left of the first photo in the first scene space of the Filmstrip. Drag the title there until you see a vertical green line to the left of the first photo in the first scene space of the Filmstrip.
    Then release the mouse click to view your title page at the beginning of the Filmstrip line up.
    Note I have demo'd this with version 11, same for version 12.
    So that you will have a project adaptable to higher resolution end products at a future time, I am suggesting the following
    Premiere Elements 12 Project Preset Set Manually
    File Menu/New/Project
    NTSC
    DSLR
    1080p
    DSLR 1080p30 @ 29.97
    before you exit the new project dialog, please a check mark next to "Force Selected Project Setting on This Project".
    Back in the Premiere Elements 12 workspace, Edit Menu/Preferences/General
    Set Video Transition Duration 90 frames (equivalent to 3 seconds in your 30 fps system)
    Set Still Image Duration 300 frames (equivalent to 10 seconds in your 30 fps system)
    Then import your photos (1920 x 1080 16:9) into the project, using Add Media/Files and Folders
    Since you are in the Quick workspace which does not have Project Assets (files go directly to Filmstrip), I suggest that you order your sized photo in a folder and then import the folder into the project with Add Media/Files and Folders.
    As for transitions (all the same), select all the photos, go to Timeline Menu/Apply Default Transitions. The duration of each will be as per the preference setting beforehand. These transition duration can be adjusted by double clicking the transition at the Filmstrip level, and making the adjustment in Transition Adjustments dialog pop up.
    Please review the details for the IrfanView and Microsoft Office Picture Manager for cropping/resizing. Explore and experiment on a mini test scale before the grand project.
    Looking forward to your results.
    Thanks.
    ATR

  • Photo slideshow order problems

    Im using ATV2 withy mac. I have linked the ATV2 to my folder of digi photos via itunes (ie i am not sharing the photos via iphoto - prefer picasa!).
    On ATV when i try to play a photo slideshow the photos are played in filename order only. This is a major problem when a folder has been populated by photos taken from two different cameras. It also causes problems with movies which arent played in order either.
    It seems the ATV2 is crying out for an option to play the slideshow in order of date/time photo/movie taken. This is what happens when syncing your photos to your iphone!
    I have tried somework arounds ie renamer or batch renaming the files in picasa. However, it appears the mac is deficient via finder in working out when the photo was actually taken. ie it gives you a filename created or modified date but this isnt consistent with the metadata of the photo of time photo taken.
    Does anyone have any work arounds/suggestions? Please help!!

    I don't have this problem using iPhoto, obviously it's your choice which software you use.

  • TS2972 no photo slideshow on Apple tv3

    Have set up recently purchased apple tv 3 - set up home sharing and selected photos to share from itunes. These load fine, show up individually on the apple tv, but no image appears when selecting slideshow.
    Sometimes the screen shows loading and pinwheel, then this freezes, otherwise the screen is blank.
    All photos appear loaded in photo screen and individually enlarge when selected.
    Screensaver doesn't work at all, unless 'Floating' mode selected.
    Any solutions to this?

    I had this exact same problem with my 3rd generation Apple TV up until yesterday. I also have a 2nd generation Apple TV which wasn't having the problem and was able to display photo slideshows.
    Just in case anyone else is still having the same problem. The solution for me was to restore my Apple TV to factory settings.

  • Photos slideshow pause/play button not displaying in 3.0

    I've been running 3.0 on my first generation Touch for several months. Throughout, I've noticed that the Photos slideshow lower-center pause/play button no longer displays once I've paused a slideshow. While the left/right arrows show and I am able to advance photos one at a time, I am unable to re-engage the slideshow.
    In software versions 1 and 2, one could freely pause and play a running slideshow. Now, when I pause the slideshow, I'm forced to bail out of the slideshow and start a new one.
    A longtime Touch owner, I'm not certain if my problem is a 3.0 software glitch or things have changed. Has anyone else encountered the issue?

    Hi,
    look here: http://discussions.apple.com/message.jspa?messageID=9843694#9843694
    I hope Apple will fix this and some other Bugs in their 3.0.1 Update which will hopefully appears in a few days.

  • Glitch with playlist used for photos slideshow

    Here is another interesting one - don't know whether people have noticed...
    I have a mixture of smart and normal playlists. They appear on the nano in alphabetical order, unlike iTunes where he smart ones are always above the normal ones. I say this as context, because I suspect, but am not sure, that it is related to this...
    When I select a playlist to use in a photo slideshow, I get the wrong one. If my playlists were numbered 1 to 7, and I select 4, I get 2. If I ask for 5, I get 3. I have exactly the right number of smart playlists above the one I want to cause this offset.
    Going to test it properly later - in the meantime, anyone else notice it?

    I get the same problem. There doesn't seem to be a pattern so far, so I just clicked and played until I found music I like... and left it there!
    I guess there are worse problems in the world, but it would be nice to sync correctly.

  • Can i start a photo slideshow directly on detail view?

    Hi all, Im working on my website right now, and am trying to make a photo page where the album is displayed directly with the detail view (with the small thumbnails on top), is this possible? I tried Cyclosaurus' way, but i still dont see anything happening!

    I did try it, but for some reason it doesnt work, when I publish nothing happens. Even though what i really would like is to have the detail view of the pictures with the small thumbnails on the top. Kind of what I read on another thread with the code below, but it didnt work either.
    <script typye='text/javascript'>
    detailViewWidget = parent.document.getElementsByClassName('com-apple-iweb-widget-detailview')[0].w idget;
    detailViewWidget.postToggleNotification(true);
    </script>
    Am I doing something wrong? here is what Im doing:
    1. I have my photos page
    2. I put all the photos I want into the slideshow
    3. I creat a an HTML Snippet and put either of the codes mentioned
    4. I publish
    ....but nothing happens, either nothing appears, or the slideshow appears normally on the first part, where you have to click in order to then go to the detail view with the thumbnails on top.

Maybe you are looking for