White flash when previewing movies on full screen

Sometimes, when previewing my current editable movie project on the full screen I see a brief white flash at the end. Any idea why this is, please, and can it be avoided? No problem, I guess, if it does not appear in the final iDVD version or on the burnt DVDs. Thanks, Keith.

Hello, Keith,
Welcome to the discussions.
Some users reported a brief white flash in association with a transition. Is yours related to a transition? The 'cure' was to move the playhead frame by frame until you see the white flash, then 'split video at playhead' to isolate the flash. Usually it is only a frame or two in duration, and you can delete it.
If it is with a transition, you will have to delete the transition, find the white flash frame, delete it and redo the transition.
Post back if this is not helpful.

Similar Messages

  • Screen goes to sleep even when viewing movies in full screen mode

    Hi, I have adjusted my settings so my screen goes to sleep after 5 minutes which is ok. But it also does this when viewing movies in full screen mode.... Is this a setting somewhere? Thanx!

    Welcome to the Discussions!
    "When the computer is inactive" or "idle" means when YOU, the user, are doing nothing, neither using the keyboard nor the mouse. So you have to increase that 5 mins in Energy Saver.
    Andreas

  • Issue when playing movie on full screen with extended desktop.

    I'm running Itunes on Windows and I'm using a dual monitor configuration. When I play a movie and go to full screen, Itunes will go full screen on the current screen but also will set black the second monitor. So, when I go full screen I lost the second monitor. Why!!?
    Is there any way to go full screen without touching my second monitor? I usually see movies while I do other stuff in the second monitor.

    lame.. but how come its not the same in all cases. if I view
    the flash video on nbc.com that will full screen in the extended
    desktop, as will youtube
    whats the difference in implementation?

  • When safari is in full screen mode and I move the mouse to the top of the screen to bring up the menu bar and the bookmark bar, it does nothing.  Is anyone else having this issue?

    When safari is in full screen mode and I move the mouse to the top of the screen to bring up the menu bar and the bookmark bar, it does nothing.  Is anyone else having this issue?
    Thanks

    I just tested that since I hardly ever use full screen mode, this was the first time since I upgraded to Mountain Lion, and it worked fine for me.
    Try shutting Safari down and see if that changes anything.
    If that doesn't change anything, try shutting down and then rebooting.
    Allan

  • Adobe Flash Player Flickers when watching Fox Business Full screen

    I am using Windows 7 (64 Bit) and IE 10.  When I go to Fox Business I can watch fine in small screen but when I go to full screen the Adobe Flash Player icon shows up in the taskbar and the screen flickers until I hit escape and revert back to small screen.
    I have tried all 7 suggestions in your help section and none help.

    There exists an Add-On named "Turn off the light". Have you installed it?

  • ITunes movie playlist full-screen on tv for only the first one

    Hi,
    I am experimenting with getting what's on my MacBook Pro (15" 2ghz quad core, bought 5/11) displayed/played on my HD TV. I have tried all kinds of approaches (XBMC, Plex, Boxee (the software version), Front Row, Miro, Serviio, TV Mobli, Twonky, and who knows what else on the MBP as well as XBMC on an older Powerbook as well as using DirecTV's Media Share) but none are satisfactory. The current approach is to connect the MBP to the TV by a display port to HDMI cable.
    The problem I am having is: when using iTunes to play movies on a playlist, I can get the TV to display the first movie as full-screen but when it comes to the next one, I lose full-screen. It reverts back to the original size of the video. When I play the same playlist on the MBP display, successive movies stay in full-screen. (Of the two movies i have tested, the first is an mp4; the next one is an m4v.)
    Is there any way I can get movies played on an iTunes playlist to stay full-screen when displayed on the TV?
    All of my movies are things I've recorded with EyeTV or otherwise captured or digitized and most are converted to QT.  Some are flash, some are Mpegs and I may have a few other formats. Nothing has DRM. I don't have any copyrighted "real" movies; they're all little things (music videos, segment from home movies, etc)  I have put together. (Features like "scraping" with Plex for example, are completely worthless/inappropriate for me and otherwise ruin what could be a good approach to dealing with all of my media.)
    I would also be curious about anyone's ideas about the best way overall to display movies and pictures from the MBP onto the TV. For streaming video I will just drag a browser window over to the TV and then go full-screen. That works for me. It is important that I keep the MBP display free for the usual computer stuff. I don't want it blacked out or otherwise made useless so any suggestion has to bear that in mind. So far I can do almost all that I want but I haven't settled on the best way yet.
    I am ok with having to switch the audio output on the preference pane to the TV when I do this.
    I am having one other issue: Sometimes I will lose audio half-way into one of these short movies (3-4 minutes long) on my iTunes playlist. I have dragged the movie window back to the MBP display and it still has no audio. I will then restart that movie and it will play fine on the MBP. I don't know what is going on with that. I am worried that the cable may not be able to carry audio ALL the time but why would I still get no audio when I have dragged the movie window back to the MBP if the cable was at fault? Any ideas on what is going on here?
    Many thanks.
    John L

    EDIT: Please disregard the previous post. I am swimming on vicodan after surgery this morning and did not realize how atrocious my sentence structure and spelling were. Yeesh.
    Not sure what the problem is. Using my iPhone 3G and component cable I watched Iron Man in widescreen on my Mitsu 62" tv but when I tried to play Journey to the Center of the Earth it will only play full screen. When I play it on the iPhone it will play in widescreen. Does anyone have a clue here because I sure don't. Thanks. Happy Thanksgiving.

  • Unable to view movies in full screen

    I am unable to watch movies in full screen mode. When I try and select it, I am simply taken back to the itunes window, but the movie audio continues. I can watch the movie at any other size. What's going on?

    There are several possible causes for the Black Screen issue
    1. Permissions in the Library: Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Include the option to check and repair permissions.
    2. Minor Database corruption: Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild.
    3. A Damaged Photo: Select one of the affected photos in the iPhoto Window and right click on it. From the resulting menu select 'Show File (or 'Show Original File' if that's available). (On iPhoto 11 this option is under the File -> Reveal in Finder.) Will the file open in Preview? If not then the file is damaged. Time to restore from your back up.
    4. A corrupted iPhoto Cache: Trash the com.apple.iPhoto folder from HD/Users/Your Name/Library/ Caches...
    5. A corrupted preference file: Trash the com.apple.iPhoto.plist file from the HD/Users/ Your Name / library / preferences folder. (Remember you'll need to reset your User options afterwards. These include minor settings like the window colour and so on. Note: If you've moved your library you'll need to point iPhoto at it again.)
    If none of these help:
    As a Test:
    Hold down the option (or alt) key key and launch iPhoto. From the resulting menu select 'Create Library'
    Import a few pics into this new, blank library. Is the Problem repeated there?

  • Have reset Firefox & completed all of steps in "Flash video won't play full screen on YouTube, Facebook and other websites", but video still won't work. Help!

    I have reset Firefox, completed all the steps in "flash video won't play full screen on YouTube, Facebook and other websites". And the video still won't play in full screen. It will play, but frequently stops or sound continues and picture freezes. I have noticed that if I continually move my mouse, it plays fine. All these videos play fine in IE and Chrome.

    Some problems with Flash video playback can be resolved by disabling hardware acceleration in your Flash Player settings. (See [[Flash Plugin - Keep it up to date and troubleshoot problems|this article]] for more information on using the Flash plugin in Firefox).
    To disable hardware acceleration in Flash Player:
    #Go to this [http://helpx.adobe.com/flash-player/kb/video-playback-issues.html#main_Solve_video_playback_issues Adobe Flash Player Help page].
    #Right-click on the Flash Player logo on that page.
    #Click on '''Settings''' in the context menu. The Adobe Flash Player Settings screen will open.
    # Click on the icon at the bottom-left of the Adobe Flash Player Settings window to open the Display panel. <br/> <br/>[[Image:fpSettings1.PNG]] <br/>
    # Remove the check mark from '''Enable hardware acceleration'''.
    # Click '''Close''' to close the Adobe Flash Player Settings Window.
    # Restart Firefox.
    This [http://www.macromedia.com/support/documentation/en/flashplayer/help/help01.html Flash Player Help - Display Settings page] has more information on Flash Player hardware acceleration, if you're interested.
    Does this solve the problem? Let us know.

  • When i select the Full Screen option in video streams (like youtube, veoh, anything like that) i can do that 1 time 2nd time the screen goes blank and can only exit it with the Esc button and then i have to restart firefox and again i have my one Full ...

    When i select the "Full Screen" option in video streams (like youtube, veoh, anything like that) i can do that one(1) time second(2nd) time the screen goes blank and can only exit it with the escape(Esc) button and then i have to restart firefox and again i have my one "Full-screen Ticket"

    I have had a similar problem with my system. I just recently (within a week of this post) built a brand new desktop. I installed Windows 7 64-bit Home and had a clean install, no problems. Using IE downloaded an anti-virus program, and then, because it was the latest version, downloaded and installed Firefox 4.0. As I began to search the internet for other programs to install after about maybe 10-15 minutes my computer crashes. Blank screen (yet monitor was still receiving a signal from computer) and completely frozen (couldn't even change the caps and num lock on keyboard). I thought I perhaps forgot to reboot after an update so I did a manual reboot and it started up fine.
    When ever I got on the internet (still using firefox) it would crash after anywhere between 5-15 minutes. Since I've had good experience with FF in the past I thought it must be either the drivers or a hardware problem. So in-between crashes I updated all the drivers. Still had the same problem. Took the computer to a friend who knows more about computers than I do, made sure all the drivers were updated, same problem. We thought that it might be a hardware problem (bad video card, chipset, overheating issues, etc.), but after my friend played around with my computer for a day he found that when he didn't start FF at all it worked fine, even after watching a movie, or going through a playlist on Youtube.
    At the time of this posting I'm going to try to uninstall FF 4.0 and download and install FF 3.6.16 which is currently on my laptop and works like a dream. Hopefully that will do the trick, because I love using FF and would hate to have to switch to another browser. Hopefully Mozilla will work out the kinks with FF 4 so I can continue to use it.
    I apologize for the lengthy post. Any feedback would be appreciated, but is not necessary. I will try and post back after I try FF 3.16.6.

  • How to disable screen saver when watchin videos in full screen in firefox??

    This happens only with Firefox, other browsers play videos normally and uninterrupted. I want to keep my window default screen saver but not when watching in full screen mode.

    The Flash Player plugin normally should block the system from going to sleep, reducing display brightness, or going to screen saver when you use its full screen mode. It's strange that you have this issue with Flash.
    There are some workarounds, like using an add-on or external program that simulates moving your mouse, but those really shouldn't be necessary.
    VLC, I don't know.
    By the way, have you shut down and restarted Windows since this problem first occurred? Just in case some shared component of Windows has crashed.

  • I have a tiny problem that is driving me mad. When I am playing an album in iTunes using cover flow view (with the playlist beneath the artwork picture) the  picture is exactly above the album title. All is symmetrical. When I switch to full screen displa

    I have a tiny problem that is driving me mad. When I am playing an album in iTunes using cover flow view (with the playlist beneath the artwork picture) the  picture is exactly above the album title. All is symmetrical. When I switch to full screen display, the artwork moves a couple of inches to the left and the display is therefore asymmetrical. Why and how do I correct it? It would drive you mad to.
    Thanks for any help,
    Graham

    I was having the same problem, but tried the "Top Button + Home Button" reset and that did work for me. My unofficial guess is that perhaps RAM caches get filled through daily use of various apps leaving no memory for cover flow. Resetting the phone on the phone itself seems to reset that RAM. I can't say it's a cure-all, but it solved my issue. Hope this helps.

  • WHEN I GO TO FULL SCREEN IT STILL SKIPS/SMALL PAUSES, EVENTHO I DISABLED BOTH OF CHROMES FLASHPLAYER

    WHEN I GO TO FULL SCREEN IT STILL SKIPS/SMALL PAUSES, EVENTHO I DISABLED BOTH OF CHROMES FLASHPLAYERS(CHROME://PLUGINS/, DISABLED TOP 2 CHROME FLASHPLAYER LEFT MINE ENABLED) this fixed alot of peoples problems but not mine, If i go to youtube or ANY video using adobe flash player, when i go full screen it either goes black or skip at an unwatchable rate. Please help,
    owe AND i just got my computer compltly cleaned out. Its like brand new, and i have adobe 11.4, latest version

    so far 0 for 34
    where you at adobe?
    i didnt have this problem on the older version seems to b a problem you created, want to fix it

  • Android Back Button when FLVPlayback component in full screen

    I'm launching an FLVPlayback component in to full screen by setting fullScreenTakeOver = true and setting StageDisplayState to FULL_SCREEN in an air for android app. This works fine. The video plays in full screen
    But when I press the device Back button, it quits out of the app.
    Everywhere else in the app I can catch the key_down event and do preventDefault(), stopImmediatePropogation(), but the event doesn't seem to fire when FLVPlayback is in full screen.
    I've tried adding the Key_Down event listener to NativeApplication.nativeApplication, to stage and to the FLVPlayback component itself. None of these seem to work.
    I do, however, get the correct behaviour when I test the app in Flash IDEs simulator
    Thanks
    Ben
    EDIT:
    Also worth noting. Using latest Flash CC and AIR 17 testing on an S4

    www.giancarlogenise.com
    the video is in the promo section.
    if you navigate the site without pressing the Full screen button, everything is fine.
    If you click the full screen , strange behaviours every time
    I bought this template, but I have to add the video section by myself.

  • Can not watch movies in full screen view?

    Can not watch movies in full screen view movie stops

    Welcome to the Adobe Forums.
    To better assist you with this issue we need to know:
    What is your operating system? (Windows or Mac) (XP, Vista, 7, 8)
    What browser do you use? (Internet Explorer, Firefox, Chrome, Opera, Safari)

  • When I go into full screen mode in Safari 5.1 on LION it switches to a new Space, making my other displays useless. Anyone else annoyed that Apple has completely left out those with multiple displays?

    I had a fear that this was going to be the case, but you can't have two full screen apps open in two different displays. At least that's how Safari fullscreen works. When switching over to full screen mode in safari, it automatically creats a new space, turns on four finger gesture to swipe through full screen apps which I had turned off in place of App Switcher.
    I don't use spaces because of the lack of support for using spaces with multiple displays. I would use spaces and mission control if I had control of each display's mission control separately.
    The fix would be to unlink the displays so they can scroll through full screen apps by themselves. I want this feature so I can mix and match the full screen apps on my three different displays. I see this beneficial for more people with multiple displays. in the future when thunderbolt display links, people will want better support too.
    I know I would use spaces and mission control more if I could have this ability. I'd be interested to know people's opinion.

    No no, if you read what I said, it would be that each individual display would be customizable to the user. The way you have it, it sounds like your second display will be dedicated to scrolling through fullscreen apps not allowing you to do it on the home screen. This is silly because with my concept, you could do that, by dragging apps to fullscreen in your second display, but if you want you could tell another display to scroll through fullscreen apps (independently) if you wanted. Each display will have it's own mission control with it's own set of desktops. I also can see how some people would still want them linked together, so this could just be a little check box made in mission control prefs to "link" or "unlink" desktops with link checked by default.
    With your solution you're limited to your setup. but what if the person has three or four displays? Well then your solution would limit them to one dedicated display that scrolls through fullscreen apps where mine lets a person customize their desktops depending on their preference and setup.
    further example: if you have safari, address book and mail in one display, you could still have ichat, PS and Illustrator in your second, and a text editor, FTP Client and iTunes in your third. Then you would mix and match these apps but it would promote the use of mulitple displays as well as benefit people with three or more, which thunderbolt, Cinema Display and Pro computers support.

Maybe you are looking for

  • Help needed in Time Capsule configuration

    Hello everybody, sorry in advance for the probably dummy questions, but I have just bought a Time Capsule and would like some advice in order to obtain the best possible configuration for my needs (the configuration guide was not so clear to me). I l

  • Insufficient Priviliege on updating wwv_flow_file_objects$

    Hello, I created a file upload form. After the file being uploaded, I need to change the file name in wwv_flow_file_objects$. But it shows insufficient prvilliege. Is there anyway I can do it? UPDATE wwv_flow_files SET FILENAME = filename WHERE NAME

  • Using || and && within the same Powerpivot Calculate syntax

    hi. i'm trying to isolate two groups of users. the 1st is a group who has suffered one of 3 "negative" experiences, without regarding whether or not they also had "positive" ones - i.e., they are the users from the entire population, who encountered

  • In process Inspection scenario

    Hi, the scenario is that, user would like to split a production order into two (i.e, Split order) so that the prod. order quantity can be split into two or required quantity and then following operations would proceed. So that half the Qty can be com

  • BAPI_EQUI_CHANGE

    hi all,          I have a material XYZ with a serial number of 123. The equipment number is 100. I wanna change this material number to ABC, serial numner to 456. I am using BAPI_EQUI_CHANGE. How do i change these values so as to reflect it in the ta