White gaps between regular and video slides

I have just created an adobe captivate video. There is a white gap between regular slides and animation slides. It usually lasts for about 2 seconds. Because of this my audio and video are no longer synced. This gradually gets worse as the presentation continues. Does anybody know how to get rid of these white gaps? I'm using version 3. The issue is demonstrated in the following video:
http://screencast.com/t/hqczdmV69b9
Thanks in advance.

It looks like they go all the way to the end of the slide. It is happening somewhere between slide 7 and slide 8 (see attached screen shots). Thanks again Rod.

Similar Messages

How to fix problems between audio and video sync?

Hello, I have this old camera DSR 200P and I'm trying to import to my final cut pro x. The importation success well but at the end the syncro between audio and video doesn't work. How can I fix it?
It's possible my mac doesn't accept this kind of camera or should I change any options of final cut?
Thank you

I use to edit footage for a client that was recorded on a DSR-250 (successor of the DSR-200) and every time, every single time, the audio sampling rate would not match my Sequence settings of 48khz, 16bit. The sampling rate of the captured video was always off by a slight amount. It might be 47999.9 one time and 48000.1 the next time ... but it was never at 48000 as it should have been. I chalked it up to Sony using cheap synthesized crystals (frequency generator) to control the rate.
Anyway, the fix was to export the captured clip using QuickTime Pro with the export's audio settings to 48khz, 16 bit.
-DH

Mismatch between sound and video

When I watch a movie in iTunes of Apple TV (2gen) and I want to move it few seconds/ minutes and more backwards then it like "losing its mind",
the video jumps forward (a lot forward) and the sound stays the same, so ther is mismatchment between sound and video.
What can i do to solve this problem?
Thank you!

Am I the only one suffering this issue with the video transcoding?

I have cross dissolve transitions set between images and videos, and I have the pan/zoom hold setting at "0." Despite the "0" setting, my images are static until the cross dissol

I have cross dissolve transitions set between images and videos, and I have the pan/zoom hold setting at "0." Despite the "0" setting, my images are static until the cross dissolve is complete. I want the pan/zoom feature to start the moment the subsequent image becomes visible. Is there a solution?

tonyproam
I am not sure if I am zeroing in on what you seek so please clarify...on
I want the pan/zoom feature to start the moment the subsequent image becomes visible.
Do you mean fading in visible versus or completely visible at the end of the transition? Whatever the case, I have not
found a scenario to fit what you are describing.
However, here are my suggestions for you to consider...
1. What is the alignment of the Cross Dissolve transition - Left Clip, Between Clips, or Right Clip. If Between Clips, please try Left Clip alignment.
2. What is the duration of the Cross Dissolve transition - you could try varying the transition duration. If less than 1 second, then please read the
details for minimum transition duration in the following
http://atr935.blogspot.com/2014/03/pe-minimum-duration-for-transition.html
Please let me know if any of the above worked for you in what you were seeking regarding pan and zoom effect and video transitions.
Thank you.
ATR

Two days before my iphone 5 battery was expand and display screen came out and now there has some gap between frame and display.so how it will happen and i already got before months.now i need to backup all the data to icloud before through out.

two days before my iphone 5 battery was expand and display screen came out and now there has some gap between frame and display.so how it will happen and i already got before months.now i need to backup all the data to icloud before through out.
https://www.dropbox.com/home/iphone
https://www.dropbox.com/home/iphonehttps://www.dropbox.com/home/iphone

Make an appointment at the genius bar of your local Apple Store. The phone has a 1 year warranty. If it's no longer under warranty, a replacement is $269.

PDF has white gaps between images

Hi,
I'm getting white lines between InDesign rendered images when viewing them in Acrobat.
ie. When I place a .psd file with trasparency onto another image and make a PDF, the area around the psd file has a faint white line.
I've looked into it a bit and seen that these are called atomic gaps or something and will never show on print. Also that I can turn off 'Smooth Line Art' in preferences to remove them (which then screws up other areas).
So the client isnt happy with an explanation of it, and would prefer a fix. One that makes everything look nice on his screen.
Is there fix? A way I can make InDesign or Distiller render the whole image maybe?
Thanks for any suggestions.

If you can't use PDF 1.4 (Acrobat 5) due to your service provider, then this is known as stitching and is only visible on screen. It does not effect final printed output.
In Acrobats preferences turn off smooth line art (Preferences > Page Display > Rendering > Smooth Line Art). This may have a visual on screen effect on type etc.

White space between header and main content

Hello all! I have a 25-27px white space between my header and
main content. I read through fixes in the forum and took out any
height that would effect this gap. I still can't get rid of this
white space. Your help is greatly appreciated! Here's the Code:
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0
Transitional//EN" "
http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
<html xmlns="
http://www.w3.org/1999/xhtml">
<head>
</script>
<meta http-equiv="Content-Type" content="text/html;
charset=utf-8" />
<title>Untitled Document</title>
<style type="text/css">

</style>
<script src="SpryAssets/SpryMenuBar.js"
type="text/javascript"></script>
<link href="SpryAssets/SpryMenuBarHorizontal.css"
rel="stylesheet" type="text/css" />
<style type="text/css">

</style>
<link href="p7hscroller/s7/p7HSM07.css" rel="stylesheet"
type="text/css" media="all" />
<script type="text/javascript"
src="p7hscroller/p7hsmscripts.js"></script>
<style type="text/css">

</style>

<script type="text/javascript"
src="slideshow.js"></script>
</head>
<body class="oneColElsCtrHdr">
<div id="container">
<div id="header">
<pre><span
class="style4">US-AsianMates</span><span
class="style6">.com</span> <strong><span
class="style9">JOIN FOR FREE <span
class="style7">OR</span> MEMBER LOG
IN</span></strong>
</pre>
<ul id="MenuBar1" class="MenuBarHorizontal">
<li>
<div align="center"><a href="#"
class="style16">HOME</a> </div>
</li>
<li>
<div align="center"><a href="#"
class="style16">ABOUT US</a></div>
</li>
<li>
<div align="center"><a href="#"
class="style16">WHY JOIN US?</a> </div>
</li>
<li>
<div align="center"><a href="#"
class="style16">VISA SUPPORT</a></div>
</li>
<li>
<div align="center" class="style16"><a
href="#">EVENTS</a></div>
</li>
</ul>
<pre>
</pre>
</div>
<div id="mainContent">
<div id="apDiv1"><img
src="Images/Outdoor_Bride1.jpg" alt="Bride" name="Bride"
width="525" id="Bride" /></div>
<p> </p>
<p><br>
</p>
<pre>
</pre>
<table width="200" border="1" align="left">
<tr>
<td><img src="Romantic_Kiss.jpg" alt="VISA"
name="VISASUPPORT" width="200" id="VISASUPPORT" /></td>
</tr>
<tr>
<td><img src="Surfing_At_Home.jpg" alt="JOIN"
name="WHYJOIN" width="200" id="WHYJOIN" /></td>
</tr>
</table>
<pre></pre>
<div id="apDiv3">
<div align="center">
<div align="left">
<pre class="style14"> <strong>LIVING
PROOF</strong>
<span class="style15">"12 YEARS AGO I WENT TO
THE PHILIPPINES IN HOPES
OF FINDING MY FUTURE WIFE. 11 YEARS LATER,
I AM HAPPILY MARRIED! WE ALSO HAVE AN ENERGETIC
5 YEAR OLD SON! DREAM IT, LIVE IT! IT CAN
HAPPEN TO YOU ON US-ASIANMATES.COM
CHRIS"</span></pre>
</div>
</div>
</div>
<pre> </span>
</pre></pre>
<p>
<br>
<pre>
</pre>
<div id="apDiv7"></div>
<div align="center">
<pre>
<script type="text/javascript">
// <![CDATA[
XMLFlashSlideshow_v3({swf:'slideshow.swf',w:'580',h:'140',redirect:'',usePreloader:'true', xml:'slideshow_data0.xml',preventCache:'true',disableMultipleXML:'false',initXML:'%3C?xml% 20version=%221.0%22%20encoding=%22utf-8%22?%3E%3Cslideshow%20version=%223%22%3E%3Cstyles%3 E%3CPreloader%20label=%22Loading%20%7BN%7D%2525%22%20iconColor=%22#666666%22%20iconAlpha=% 2270%22%20iconWidth=%2250%22%3E%3C/Preloader%3E%3CPreloaderLabel%20font=%22Verdana%22%20si ze=%2210%22%20color=%22#666666%22%20bold=%22false%22%3E%3C/PreloaderLabel%3E%3CBackground% 20backgroundColor=%22#FFFFFF%22%20backgroundAlpha=%22100%22%20bevelColor=%22#FFFFFF%22%20b evelStrength=%2270%22%20borderWidth=%222%22%20borderColor=%22#000000%22%3E%3C/Background%3 E%3CLoaderAnimation%20type=%22circle%22%20color=%22#FFFFFF%22%20alphaBackground=%2220%22%2 0alphaInner=%2240%22%20frameWidth=%222%22%20width=%2250%22%20height=%2250%22%3E%3C/LoaderA nimation%3E%3CDataLoader%20useAnimation=%22true%22%20useLabel=%22true%22%20labelPlacement= %22bottom%22%20fadeOutDuration=%22400%22%20textFormat=%22loader_text%22%3E%3C/DataLoader%3 E%3C/styles%3E%3Clocalization%3E%3Ctext%20orig=%22Loading%20Data...%22%20local=%22Loading% 20Data...%22%3E%3C/text%3E%3C/localization%3E%3Cfonts%3E%3Cfont%20id=%22loader_text%22%20n ame=%22Pixelade%22%20embed=%22true%22%20size=%2213%22%20color=%22#666666%22%20bold=%22fals e%22%20selectable=%22false%22%20align=%22left%22%3E%3C/font%3E%3C/fonts%3E%3C/slideshow%3E '});
// ]]>
</script>

</pre>
</div>
<pre>
</pre>
<pre> </pre>
<pre> </pre>
</div>
<div id="footer">
<p>Footer</p>
</div>
</div>
<script type="text/javascript">

</script>
</body>
</html>

"phillychris" <[email protected]> wrote in
message
news:[email protected]...
> Yep, it was the 1 pre tag creating the gap. So why is
this page a
> disaster, Tim?
Just because something is created in DW CS3 doesn't mean it's
not a
disaster, any more than using DeWalt power tools guarantees
that my
carpentry won't be a complete mess. The software is not a
replacement for
skills. It is a tool; your workflow and understanding of HTML
and CSS is
what allows you to use DW effectively.
So why did I call this page a disaster? When I see all that
extra markup,
spans, and inline tags, I shudder. It's way too hard to
troubleshoot. You're
not doing nearly enough with descendant selectors; instead,
most of your
code is inline, despite a huge CSS file.
Just one example: individual li tags with div align="center"
inside of them.
Way overkill. If you're centering all the li text in a given
list, control
it with CSS and kill all that extra markup.
E.g.
.MenuBarHorizontal li { text-align:center; }
In fact, if all there is in that .MenuBarHorizontal is the
list, you don't
even need to specify the list in the CSS. Just do:
.MenuBarHorizontal { text-align:center; }
Now you don't need div tags inside your li at all.
And if all of those a tags in that menu are going to be
.style16 class,
don't specify it on each link. In fact, don't even have a
.style 16 class.
Heck, since it's just specifying font size, you don't need to
target the a
tag at all. Just add font-size:x-small; to the
.MenuBarHorizontal ruleset I
gave you above.
The above are just examples from a quick glance at your code.
On the whole,
your markup and approach to styles are largely wasting the
power and point
of CSS.
In addition, several styles spanned onto one line of text...
a sure sign
that either you are using far too many styles to make design
sense, or else
you've got styles that overlap each other.
Here's my advice: Until you get a better handle on CSS, don't
style things
as you go. Forget styles altogether at the start. Create a
very clean HTML
markup and put ID and class selectors on things you know will
need them.
Preferably, place the HTML elements in the order you would
want your page
read if styling did not even exist, nesting elements where
necessary.
After you have created all the HTML structure, then go back
and style the
elements via CSS only. You will end up with less page weight
and far cleaner
code to decipher, not simply in terms of length but in terms
of conflicts
and redundancies.
If you're really insistent on styling things as you go, at
least do this:
don't create a new style every time you want to accomplish
something. Create
CSS rules for IDed containers and container classes. Then as
you go along
and are about to create a style, ask yourself where you are
and what all
this new rule needs to apply to. Specify the rule there,
under the selector
you've already created. Then you won't have .style1 -
.style16 like you do
now, and you won't have all that inline mess of code to sort
through.
Finally - as you create your CSS, discipline yourself to
avoid style spans.
They are necessary on the odd occasion, but very rarely.
Think semantically
(i.e. purpose of the style point you're making at a given
time).
For example, if you're tempted to create a span in order to
put something in
bold red, ask yourself: "Why?" Generally, it means you want
to place special
emphasis or strength on that. Well, in that case you don't
need a span. You
need to be using the proper tag, such as <em>
(emphasis) or <strong>. Then
you can style that tag in CSS. That way, what you have in
your page actually
makes sense apart from the style, and as a bonus you can
apply or edit your
style easily.
Tim G.
http://www.pactumweb.com
http://www.shortordersite.com
Be smart:
http://www.pactumweb.com/client/tips.php

Gap between masthead and toolarea

Hi All,
I am facing a problem of white space( a gap) between the masthead and toolarea when i open the anonymous page which has been customised but when the same page is opened in the preview it appears to be perfect.
i have checked the jsp files of masthead and toolarea but it does not have any Margin attribute such as: topmargin="0" rightmargin="0" leftmargin="0" marginwidth="0" marginheight="0".
can anyone help me on the same.
Thanks,
Gunjan

Hi,
Try to change the Theme of this Desktop, may be there is a mis-configuration in the Theme itself.
Check also this for similar problems with themes:
TLN overlaps with Masthead
Greetings,
Praveen Gudapati
p.s. Points are always welcome for helpful answers

Gap between glass and bezel on iPhone 5?

http://www.flickr.com/photos/78962116@N07/8405746907/in/photostream/
See the link above (theres a picture) for the image.
So guys, I purchased my iPhone 5 this Saturday and, having not dropped, banged, or anything of the sort to my phone since then, I noticed this gap between the glass pane at the top of the phone's back and the bezel surrounding the device.
I am so completely OCD about things like this, and so everytime I pick up my phone, I have to look at it... I hate it. I have looked at several other white iPhone 5s in person, and none have this issue. I am debating wether to take it to the Apple Store or not.
Also, the sleep/wake and volume buttons feel extremely loose and they were not on either of the other devices I held.

What if I purchased the phone from an AT&T store, not an Apple Store? Will that affect anything? And how long do I have the warranty until (I have a normal warranty, not extended)?
^Sorry for all the questions!

Copy and paste styles between objects and entire slides

Hi,
In Keynote 5 I was able to copy and paste styles between objects and even between entire slides.
cmd+alt+c on one object (like a circle) and all its details like shadows, colors and animations could be transferred to another object.
One could even do it with entire slides and transfer one animation style to all the other slides.
THAT DOES NOT WORK ANYMORE.
Does anybody else miss these features?
Or is it just me?

object animations tools are:
copy animation:   Format > Copy Animation
paste animation   Format > Paste Animation
     there are no keyboard short commands for these.
There are no tools to copy or paste transitions between slides, you could duplicate the slide then add the content.

How to maintain gap between table and graph in a report

HI,
I have a report in which a graph is placed below a table and data in the table gets increased with time , then how to maintain the gap as constant between table and the graph ?? Like i have 50 rows in a table and then next day 10 rows are added but then i want maintain same gap between the table and graph???

>Right click on chart.
>Open the property and go to the relative position.
>Select the distance of the upper left point of the chart in relation to another report element by entering - the number of pixels; the part of the tavfrom which youble want to measure the pixels (in the first drop-down list); the report element from which you want to measure the pixels (in the second drop-down list).
>Repeat this for the distance of the lower left point of the chart.
Hope this will help you out.

Differences between regular and Japanese localized

What are the differences between regular JDeveloper 2.0 and
Japanese localized versions ?
I received regular JDeveloper 2.0 (Build 343) from the U.S.
Is there any issue or limitation to use it in order to use
Oracld RDBMS 8.0.5 & 8.1.5 created with character set JA16EUC
running on Solaris ?
I think there is no issue or limitation if we use it with
NLS-zip.
Or do we have to use Japanese localized versions ?
Then what's the benefit of using it ?
Any information about this would be much appreciated.
Best regards,
null

The US JDeveloper version if used with Japanese fonts , or
better with a Japanese NT will allow for display and input of
Japanese text including when interacting with Oracle databases.
This is the internationalization support and JDeveloper is
internationalized for Japanese
The only difference between the versions (other than a couple OS
dependent bugs in the readme file) is that the Japanese version
has a UI and documentation in Japanese as opposed to English.
Hope this helps.
Yoshikazu Ichitsuka (guest) wrote:
: What are the differences between regular JDeveloper 2.0 and
: Japanese localized versions ?
: I received regular JDeveloper 2.0 (Build 343) from the U.S.
: Is there any issue or limitation to use it in order to use
: Oracld RDBMS 8.0.5 & 8.1.5 created with character set JA16EUC
: running on Solaris ?
: I think there is no issue or limitation if we use it with
: NLS-zip.
: Or do we have to use Japanese localized versions ?
: Then what's the benefit of using it ?
: Any information about this would be much appreciated.
: Best regards,
null

How to decrease the gap between label and input field.. pls respnd

hi friends,
I am facing this problem since long time and couldnt get any solution...
pls respnd,
i need to decrease the gap between my input field and label.. its very much gap there..
thanks in very advacne,
niraja

Hi WD ABAP,
i am doing the same, created tcontainer, and just binded my node. i given matrix layout. But i dont know why it is coming like that.
Also WDABAP, could you pls reply me to the other thread,
about when im trying to read the dropdown value of subnode, the get_static_attribute or create_element method is going into my supplyfunction.
supplyfunction - my code is to fill the dropdown. and due to this supply function triggering,
my get_static_att or create_element is not reruting currenct row dropdown value.
what am i doing wrong.. can u pls pls.. its kicking me. i have spent my whole weekend on this, but couldnt solve this.
plsfnds :(((((
Niraja

Gap between header and content in IE

Hello All
I subscribed to a post with this basic same question but I
never got a notification if it got answered or not
I all of a sudden have a gap between the header and content
on this site
http://www.michaelsondesign.com/guestVision/
- I am not sure why , it started when I added to the menu on the
left
Any ideas?
Thanks
Rob

Add this to your CSS
img {vertical-align:top;}
You cannot lose until you give up !!!
"BOC_RUSH" <[email protected]> wrote in
message
news:fsn546$nrm$[email protected]..
> Hello All
>
> I subscribed to a post with this basic same question but
I never got a
> notification if it got answered or not
>
> I all of a sudden have a gap between the header and
content on this site
>
http://www.michaelsondesign.com/guestVision/
- I am not sure why , it
> started
> when I added to the menu on the left
>
> Any ideas?
>
> Thanks
>
> Rob
>
>

Gap between lcd and digitiser

Any one find the gap between ipad air lcd and digitiser annoying? I mean it could be better if they were one. Sometimes when tapping a little hard on th screen makes sound as if ita hollow inside.

I never noticed it before, but yeah it has a larger gap on the right side than on the left...
But hey, I look at the screen not at the gap. I'm happy to have an anti-glare IPS screen.
| X220 i7-2620M | 12.5" IPS | Intel 520 Series 180GB Main SSD | Mushkin 120GB mSATA SSD | 8GB RAM | Intel 6205 WiFi | BT | Win7 Pro 64 SP1 |

White gaps between regular and video slides

Similar Messages

Maybe you are looking for