White generater black text Custom

Hi,
I wanted to make a not moving text on the white phone. I used Generater -- Whites. and I wanted Custom Text (which was also white by default) which doesn't move. But I couldn't find where to change the text color. So I had to use another text (Fade out) There must be a way to make black text on the white phone.
Thank you! Your hepl is very much apreciated

Use the Face section of the text inspector to change the color.

Similar Messages

How do i change the background display to white with black text. It is white text on blackbackground right now

Why is my screen display black background with white text? How can i change back to black text on white background?

Change it in Settings > General > Accessibility.

White on black text knockout

I am having problems with some white text (converted to paths) which is placed on a black background.. When viewing the pdf in Illustrator (CS4), the text show up fine. When viewing in Acrobat (which the printers will print from), the white text has disappeared. This only applies to some of the text (EXECUTIVES ONLINE on attached pic.), the rest is fine. Any ideas as to what is going wrong? Should I set the trapping to knock out the black? If so, how?
many thanks.

Slect the text
then go to the Attributes Panel and see if the white is set to overprint if it is then uncheck Overprint Fill as you want it to knock out.
Overprinting white on black will yeold black which you do not want.
So uncheck overprint for the text.

Cursor disappears in Word 2004/2008 with white on black text

When I turn on white text on black background, and open a document in Word 2004 or 2008 (or text entry field, in, e.g., Firefox**), when the pointer changes from an arrow to an "I-bar" shape, it disappears. If I toggle back to black text on white background, poof -- there it is. I talked to Apple support and they were able to reproduce the problem, but said it's with Word. I talked to Microsoft support, and they said it's an Apple problem. I don't care; I just need a way to fix it, because using Word is difficult w/o a pointer, and I need to use Word. Anyone have any ideas? I do NOT see a problem with, e.g., Mail.app, where the cursoer also changes to an I-bar at times, but remains visible even in high contrast mode. Note also that this probem does not occur using Word for Windows using Windows high contrast mode (which, however, really is primative compared to OS X's mode).
**Re Firefox example: I'm filling out this form right now, and although the insertion point is visible (the vertical bar where text is entered), the pointer (the arrow that changes to an I-bar when it's inside this text-entry box) is not. All I need to do to make it visible -- as in Word -- is hit Ctrl-Cmd-Opt-8 to toggle the text to black on white, and there it is.

Thanks for the suggestions.
1. White on blue is a partial solution. It's actually still a little glarey for me (I have an eye problem), and, of course, when I switch from Word to another program, I have to toggle back into white on black for the other program, so I can see it.
2. I thought of Pages, too. It works fine, except that I need to exchage documents with PC users, who use Word. For some reason Pages displays line and page breaks in different places than does Word, which is a problem when moving docs back and forth. (Apple support told me that Pages renders fonts and line spacing differently from Word, and there's no way to make text look the same in both programs.) Thats a deal-killer, because the folks I work with and I need to see page layouts exactly the same. TextEdit doesn't have the features I need.
3. As to other programs: It also happens all other Office apps, in Mozilla Thunderbird, and with Palm Desktop for the Mac. It does NOT occur, oddly, in NeoOffice. I initially thought that the re-write of Word from 2004 to Universal Binary in 2008 would fix the problem, but it didn't. Maybe other folks who are listening (reading) in can try it on some third party programs. I don't have or use anything else that I can think of.

White on black text in toolboxes - can it be reversed?

I

Sounds like you might be using the default Dark theme. Open the application preferences and go to the Interface section and see if you like one of the others better.

Using Export for Kindle, how can I get black body text to display inverse (white on black) on Kindle

I'm using ID 5.5 on a Vista system.
I've created a book file with some colored fonts and anchored gif images. Basic paragraph (body text) is black. The "Export to Kindle" mobi file displays fine on Kindle for PC and Kindle Previewer.
Kindle PC alows viewing on white, sepia or black background. Works fine on white and sepia, but when the black color mode is selected (night viewing option) the black text does not display as white text. What can I do to have the black text automatically change to white?
While trying to find a solution, I created an epub file of the book and, using Calibre, converted it to mobi. When this mobi file is loaded into Kindle PC, the black text does automatically change to white when viewed on the black screen. I would use this method of creating the mobi, but there are several other issues that make this process unsatisfactory (other text colors don't work well, image transparency losses, etc).
So, how can I get the black to white text thing using only Export to Kindle?
Jim

Grayscale is probably the best (Settings>General>Accessibility>Grayscale)
-Ethan
EDIT: If you would like a black color scheme, use the suggestion in the reply above.

How do I setup my printer to print the colored background white and the text black on PP slides?

I have an Officejet Pro L7680. I am attempting to print PowerPoint slide that have a blue background and white text with a white background and black text. I've made changes within PowerPoint and made adjustment when printing and neither helps. I still end up with printed slides having a black background with white text? Thank you!
Lamona1955

Hi,
Follow these steps to disable two sided printing:
Open the file you would like to print. From the File menu select Print. The Print window appears.
NOTE: The Print window might be minimized. Click the Show Details button to see all available settings.
Click the settings drop down, it will usually appear as the name of the program (e.g. TextEdit)
Will appear as Copies & Pages within Microsoft Office applications.
Select Layout from the drop-down menu.
Set the Two-Sided option as Off.
You may save the settings as a preset by clicking Presets > Save Current Settings as Preset...
By doing so and completing the print job these settings will remain default till another preset will be used in the future.
Regards,
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

InDesign printing to PDF results in white "highlight" effect behind PLAIN black text.

InDesign printing to PDF booklet spreads results in white "highlight" effect behind PLAIN black text. There are no text effects like drop shadows or transparency. Some of the text is in it's own shape above a semi-transparent shape, but not all.
Exporting to PDF does not cause this problem, just printing to pdf. I cannot use the exported pdf as I need the full booklet spreads. Help!

In addition to vinny38's advise to not print to PDF, you may not even need printer's spreads, unless you are printing this yourself. If you are sending this off press, the prepress team will want to do the imposition themselves. If you are printing to a network copier, some have the ability to do booklet printing from a multi-page PDF saved in single-page reader's spreads (one page for each page of the document, rather than two document pages for each PDF page).
If you do need to print this yourself and if you have to impose it in InDesign, consider making a new document and placing the pages of your original document onto the pages of the new document, the way you would place any other images. You can decide where the pages have to go in order to get printer's spreads, and when you're done imposing, export as a PDF and print that PDF to your printer. You will get a better-quality PDF than printing to PDF.

How do you change the text color in io7 from white to black?

How do you change the text color on the home page in iO7 from white to black? I tried to invert the color but that reverses everything inclufing pictures.

Yes, you can. If you change your wallpaper to a very light or white color the text turns black.

Black text prints white

I finally purchased a copy of iWork '08 and merrily created about 80 slides only when I went to print them out I discovered that the image of the text was in most places white. If the text was in a box it printed and some of the grey text printed along with all text I have set up to fade in or out as the presentation progresses. The details:
The black text appears in preview but appears white due to the colored background.
Changing fonts does not help.
All other programs print fine. I am printing on a Canon MP830, the text does show up on my Laser.
If I export it to a .pdf the problem follows, even though the text appears on the screen and in preview.
If I change the color of my text from black to red, or blue it prints fine, shades of grey do not.
If I export the file to power point and print it from an old version I have in a "Classic" partition running OS 10.4 it prints but when I installed iWork in this partition I get the same result.
The printer, my software, and iWork has the latest updates installed.
This is obviously (well maybe not so obviously since it could be a virus no one has caught up with yet) a huge bug in iWork and how it handles black text (I don't know about graphics because there are not black graphics in my slides). I spent several hours reading through the "Discussions" and there are quite a few instances where black text comes out white, blank sheets print out, conversions to .pdf come out with no text ect.
Does any one know of a work around for this? My only option currently is to fix this or return iWork and go back to Micorsoft with my tail between my legs and purchase Office.

Presets is set to "Standard" I never changed it. If I select the drop down window there is a choice for "last used settings" and a "Save As".
I did manage to get my slides printed by saving the file as a Power Point, opening it in a old Office 2001 version of Power Point I have in a "Classic" partition. After a little reformatting they printed perfectly on the same printer. Its kind of sad to have a 8 year old Microsoft program out-perform the latest program from Apple. Of course I will say that using Keynote was enjoyable, but if you can't reliably Print and Export the program is useless no matter how many useful features it comes with.

White text on black -- black text on white?

I have a pdf document that has a black background with (mostly) white text (highlighted text is blue).
Is there any way using Acrobat Pro X to invert that to get a "normal" document with black text on a white background?
If I try Tools > Pages > Edit Page Design > Background > Remove Background, there's a progress bar that says "Removing background," but after a short time that goes away having done nothing. If I try Update Background, I get an error message: "Adobe cannot find a background in this file. If you see a background, it was not added in Acrobat or by an AdobePDFMaker, and cannot be detected as such."

The only thing I can think of to try is to print the document and then scan it, setting your scanner to reverse black and white.

Black Text Has White Halo When Save as PDF

I have 12pt black text on a green background and when I save as a PDF, a white halo pops up under some of the text, but not all of the text. On the words it does it on, it is as if I had the same word typed in white text with black text on the top. If I flatten the image first, it goes away but the text losing quality.

I have 12pt black text on a green background and when I save as a PDF, a white halo pops up under some of the text, but not all of the text. On the words it does it on, it is as if I had the same word typed in white text with black text on the top. If I flatten the image first, it goes away but the text losing quality.

Black text on white background has horrible glow after export & viewed on TV.

I'm wondering how to correct a glow that develops around black text after exporting. Black text is on white background of course.
Export settings:
H.264
HDTV 1080p 24 HQ
I've checked of 'use max. render quality' as well as 'render at max. depth'
If someone could help, that would be greatly appreciated!

If you want to try the contrast change.
In Titler ..make the White Fill less than full white. ( Color Picker Fill) 235 to 245 should be fine.
I would not mess with the Black and you should not need to Key line anything with Grey.
But maybe you did not make this text in Titler.
If not..you need to make the changes in original application. eg PhotoShop.
What TV is involved in viewing this?
How does the Text look in the PPRO Monitors?

Okay so i have been trying to contact apple for days now but i was just thinking why do we have to only choose between white or black for the digitizer? would i be able to send my ipod into apple to get it customized to a different color besides that?

okay so i have been trying to contact apple for days now but i was just thinking why do we have to only choose between white or black for the digitizer? would i be able to send my ipod into apple to get it customized to a different color besides that?

Apple does not offer custom colors. I'd suggest you get a skin for your iPod. Those are available in hundreds of colors and patterns and since they're not permanent, they don't affect the iPod's warranty and you can change if you ever get tired of the skin you chose.
Regards.

IPhone 5s 7.1 update now have white AND black label text instead of all white text

Hello. After I updated my iPhone 5s yesterday evening to 7.1 the label text on my iPhone's home row is now black instead of white and when I open my folders the text is now also black text instead of being an all uniform white text and this is bugging me is there a way to change it? Please see photos below to demonstrate what I am talking about. Thanks in advance.

Turning on Reduce Transparency in Settings results in gray backgrounds to the dock and folders and the black instead of white text.
You can turn off Reduce Transparency. The black text will turn white and the solid gray will become a little transparent taking on the color of the wallpaper.
Settings > General > Accessibility > Increase Contrast > Reduce Transparency (turn this off)

White generater black text Custom

Similar Messages

Maybe you are looking for