White horisontal line

I've just bought iPhone 3G. After 2 hours of use in the middle of the screen I saw a white horisontal line.
I tried to switch off, reboot and restore iPhone, but the line is still on the screen. What can I do?
Thanks in advance!

Standard troubleshooting steps in the following order:
1. Power the iphone off, then back on.
If no change, continue:
2. Reset: Press the sleep/wake button & home button at the same time, keep pressing until you see the apple logo, then release. Ignore the slide to power off. No saved data or settings will be lost.
If no change, continue:
3. Restore your phone from your most recent backup, Note, however: if the problem is related to corrupt data in your phone's backup, while this will restore a fresh OS, it will also restore the problem.
If no change, continue:
4. Restore as a "new" phone in itunes & re-sync your content. All saved data will be lost.
If no change, make an appointment at an Apple store, as you most likely have a hardware problem. There are no more user troubleshooting steps available.

Similar Messages

What is the white horizontal line and red vertical line on my brand new ipad mini?

Bought a brand new ipad mini 2 for my sons Christmas, took it out the box and it was during the set up process, ie entering his iTunes and icloud account, a white horizontal line and a red vertical line appeared on the screen and is there all the time now. Have tried switching off and on and resetting, but it is still there. Any ideas??

Hi Tolmivooz,
So the lines didn't appear until you were into the setup?
Does the orientation of the lines change when you rotate the screen?
Thanks for trying the restart and reset. Please see if a restore helps.
Get help with the screen on your iPhone, iPad, or iPod touch - Apple Support
If you see lines, missing sections, discoloration, or poor image quality
Try to restart your device. If you can't restart, reset your device.
If restarting or resetting doesn’t fix the issue, restore your device.
If you still see the issue after you restore, contact Apple Support.
Best,
Nubz

I opened my iPod Touch up to fix my home button. When i closed it back up it had a white screen. I tried pressing lock and home button for 10 seconds and it worked but while i'm using it it goes white with lines on the screen. Help please

I opened my iPod Touch up to fix my home button. When i closed it back up it had a white screen. I tried pressing lock and home button for 10 seconds and it worked but while i'm using it it goes white with lines on the screen. Help please. This has been happening for a while and i've tried everything but it doesn't work.

Try:
fix for Home button
iPhone Home Button Not Working or Unresponsive? Try This Fix
- If you have iOS 5 and later you can turn on Assistive Touch it add the Home and other buttons to the iPods screen. Settings>General>Accessibility>Assistive Touch
- If not under warranty Apple will exchange your iPod for a refurbished one for:
Apple - Support - iPod - Repair pricing
You can do it an an Apple store by:
Apple Retail Store - Genius Bar
or sent it in to Apple. See:
Apple - Support - iPod - Service FAQ
- There are third-party places like the following that will repair the Home button. Google for more.
iPhone Repair, Service & Parts: iPod Touch, iPad, MacBook Pro Screens

Why do I have white horizontal lines on my Macbook Pro Retina?

When I am using my 15" Macbook Pro, there are often white horizontal lines that run across the screen. It usually happens when I am watching a video, typing, scrolling or just sitting on the desktop. There are days where the screen is perfect and there are no problems; there are also days where it happens so frequently that some videos becomes unwatchable due to the distracting lines flickering and flashing on the screen. They don't stay all the time but I'd love to know what the problem actually is. Thank you for reading, and please help me out.

Hi there JohnRendleman,
I would recommend taking a look at the troubleshooting steps found in the article below.
Apple computers: Troubleshooting issues with video on internal or external displays
http://support.apple.com/kb/HT1573
-Griff W.

I have a white vertical line down the right side of my internal brand new macbook pro 13" display

I have a white vertical line down the right side of my internal brand new macbook pro 13" display. I've done the following:
-Shutdown the computer, and restarted in Safe Mode by pressing the Shift key after the restart tone
-Shutdown the computer, and restarted by pressing Command, Option, P & R after the restart tone
-Checked display resolution, Best for Retina
-Hooked it up to a Dell external monitor and via projection to screen. There are no lines on the external or secondary screens
-Just curious, I ran a color utility which can not repair 4 items, maybe this is another issue.
This is a brand new Macbook Pro, just out of the box. It was fine for two days without any issues, fine last night while in use, opened it up this morning with the line.
Anyone now how I can fix this on my own?
Details atta
<Edited by Host>

If you are within the first 14 days from the date of purchase, return the MBP for a refund or an exchange. If you are after the first 14 days of the date of purchase, have the MBP repaired under the warranty provisions.
Ciao.

Black screen with white flashing line on startup

~computer info~
Mac OS X Version 10.6.7
2.66 GHz Intel Core 2 Duo
4GB 1067 MHz DDR3
24 in. Montior
Startup disk: Macintosh HD
~Partition info~
FAT32 Windows XP
~issue~
Hello; I've recently encountered a problem with bootcamp that I can't find a solution to... Every time I start up the computer in boot camp, all I get is that black screen with the white flashing line. It comes up, goes to a plain black screen, then quickly comes up again. It never stops, either. I've let it run, and it won't finish.
I've had the partition for MONTHS now, and nothing like this has happened. I've had it since I upgraded to Snow Leopard awhile back, and needed to re-partition the drive. I literally had been using it the day before it happened, and the only thing that happened was that I got that "Windows Security 2011" malware, but I got rid of it fully (As I've gotten it 3 times this month). The other two times I got it, it didn't do anything. I fixed it, and went on with life. But is it possible that it broke something in the partitions inner files this time?
I ran disk utility, and it said the partition was broken. After verifying it and confirming this, I did "Repair Drive", as it allowed me to. It finished with no errors and said it completed, so I tried to go back into the partition, but it gave me the same results.
To be honest, most of my stuff is on my External Harddrive, so re-doing the partition is only going to be time used to me. But I still DO have things on there, and it'd be a pain to transfer them back and forth between the Mac and Windows partitions... I'd really like to know if there's anyway to fix this, or if it's just going to fall back to me re-partitioning the drive...
Thanks for the help in advance.

That blinking line is a "cursor." It's only supposed to show for a second or two as your iMac switches to and then starts Windows. But as you indicate here, it's not getting past the cursor..
Disk Utility can repair FAT volumes, but it cannot correct issues caused by corrupted items which, if the volume was repaired, there may be some.
Since we are dealing with a Windows boot partition, it's entirely possible that the repairs inadvertently corrupted the data Windows needs to start and run. It's also posible that Mac OS, in fixing the Boot Camp volume, overwrote the existing boot record in the Windows partition with a generic, though non-bootable version.
Windows' own CHKDSK should have been used to make the repairs rather than the OS X Disk Utility, which would have avoided this worst-case scenario in data recovery. CHKDSK has a special version of itself on the Windows disc, which may be accesed by using the Windiws Recovery Consile upon pressing R during the "Welcome to Setup" screen.
Though it appears ftom my position here that you will need to reinstall XP, it may yet be possible to recover data that hasn't been copied to the external HDD. For this task, I'd like to recommend that you start up in Mac OS for the time being, and pull any new or changed items from the Boot Camp volume except for installed software; the latter are nearly impossible to transport with reasonable accuracy, and should instead be reinstalled.
Once you have what you need, format your Boot Camp volume and reinstall Windows, this time selecting NTFS as your filesystem. NTFS is the preferred option for Windows in general, thiaks to its innate file access controls as well as the ability to compress or encrypt data "on the fly." NTFS can be read by Mac OS X, but not written from it, thus NTFS volumes cannot be altered except by Windows itself.. But it is also a requirement if you plan to upgrade your unit using Windows 7 in future.
Nate

White horizontal line on macbook pro retina display

When I scroll through photos, sometimes a white horizontal line will span the screen for a short time. It will span the whole screen for less than a fraction of a second so it was difficult to take a photo of it. I managed to do it but here the line is only halfway across the photo I was looking at.
Does anyone know what this line is and how I can avoid having it?

Take the MBPr back to an Apple store genius bar and have the techs check it out while still under warranty...a graphics module problem will need their attention.

Illustrator CS2 adds mysterious white dashed line thru my linked Photoshop file

Im using Windows XP, Illustrator & Photoshop CS2, Acrobat 7.0 Professional.
I have an illustrator file with a linked PSD file that has this mysterious thin white dashed line going through the entire image & I have no idea what it's from or how to repair it.
My trouble shooting thus far includes:
- In illustrator - I hide all the layers to see if there was an odd graphic on another layer that was causing the line, nothing. I tried to select the dashed line, not possible. I've created a PDF of the file, and the dashed line is in the PDF too (to verify it wasn't just Illustrator). Oddly in both Acrobat & Illustrator when I zoom in & zoom out, the dashes maintain their on-screen viewing proportions (like the dash spaces recalculate to the same tiny thin dashed line no matter what zoom Im at)
- In Photoshop - I zoomed in until I couldn't zoom no more and there is not the slightest dashed line in the graphic.
Lastly, I have this exact linked setup repeated throughout several different files (basically its the same ad but laid out to different dimensions for each)... and none of the others have this mysterious white dashed line.
here's a screen capture from Acrobat... zoomed into 6400%
argh - can someone help? Thanks!
kristin

Hi guys (and sorry for the tremendous delayed response).
No the line doesn't print on my local b/w laser printer. However I have seen the lines print in 1 newspaper publications... (this is out of 50 different publications)
Yes, the image is rotated slightly in illustrator, and I always flatten prior to making the PDF (cuz of the transparency/drop shadow).
It's really making me nervous that ALL our ads have these lines appearing during onscreen viewing... Im making a new batch of ads for our campaign & there are more lines than before!
Any tips theories remedies my friends?

IPod screen is white with lines

HELP! HELP! anyone?
Hi guys i have a problem that i have never experienced before, here goes...i have a 30GB 5th generation iPod, i was playing music when i deceided to sync so music, When i connected it to the PC the screen just went *white with lines across the screen* as though the display was damaged. The lines were showing different colours because the logo "DO NOT DISCONNECT" was attempting to show.
I tried restarting & restoring my iPod but that didn't work, when i restarted it the screen was tring to display the "APPLE" Logo after it was booting up, the screen was dark as usual when u restart it but with lines across and when the main screen came up it was white with the lines. Now the next weird thing that happened was when i turned off the iPod and then turned it back on the screen was back to normal, when i turned it off and on again the problem returned, if i leave it off for about *1-2 minutes* and i turn it on its fine but when i turn it off & on the problem returns.
Besides the problem with the lines on the screen the ipod is working ok, can anyone please assist with with the huge problem? i don't know what to do...HELP ME!

Just experienced the same problem yesterday and left with two white lines across the screen and 1/3 from the top of the screen.

Exporting as a PDF - white grainy line appears around object

When I export as a PDF a white grainy line appears around an object where I've used a gaussian blur? why is this?

Thanks for getting back to me
here is an example of the problem....
I'm using a trial of Illustrator CC, Not sure on the programme to inspect the files...Hope this helps.

Mac Mini - Paslam = horisontal lines

Hello all!
I am trying to connect my Mac Mini to a plasma (Panasonic TH-37PV45EH) via VGA. Everything is looking good until I log in. Then the screen turns into horisontal lines. Please, if anyone have a solution to this, please advise me.
Best regards

The Mac is switching to an unsupported resolution when logged in. Try starting in Safe mode and see if the problem goes away.
http://docs.info.apple.com/article.html?path=Mac/10.6/en/21245.html

A 3cm wide, bright white vertical line has appeared o my screen. I can't get it off.

A 3cm wide, bright white vertcal line has appeared on my screen and I can't get it off.

Hello:
I suggest you take it in for diagnosis/service. The problem would appear to be hardware.
Barry

There is a white straight line which comes under the Most Visited, Getting Started and latest headlines and continues to be on the entire firefox. I tried uninstalling and reinstalling but does not work.

Got Plugins symbol at the white straight line...
== This happened ==
Every time Firefox opened
== 1 day ago

Hello Iqbal.
You may be having a problem with some Firefox add-on that is hindering your Firefox's normal behavior. Have you tried disabling all add-ons (just to check), to see if Firefox goes back to normal?
Whenever you have a problem with Firefox, whatever it is, you should make sure it's not coming from one of your installed add-ons, be it an extension, a theme or a plugin. To do that easily and cleanly, run Firefox in [http://support.mozilla.com/en-US/kb/Safe+Mode safe mode] and select ''Disable all add-ons''. If the problem disappears, you know it's from an add-on. Disable them all in normal mode, and enable them one at a time until you find the source of the problem. See [http://support.mozilla.com/en-US/kb/Troubleshooting+extensions+and+themes this article] for information about troubleshooting extensions and theme. You can troubleshoot plugins the same way.
If you want support for one of your add-ons, you'll need to contact its author.

White vertical lines when printing

Hi hope someone can help me I have white vertical lines when printing photo tried doing the usual cleaning etc but still there.

Hi SandyWilkey,
It is recommended that you contact live technical support . There is NO charge for this call. Real time feedback of a live technical support call would be very beneficial in this case. Please dial 1-866-261-9362, Monday - Friday 10:00 a.m. - 10:00 p.m. ET (excluding holidays). A Canon technical support representative will be able to resolve this issue faster.
Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

White flex lines appear automatically

When Flexing in logic 9 sometimes white flex lines appear over all the recorded audio, this isn't quantised and the audio hasn't moved, but logic puts the little white flex lines all over the whole of the tracked audio.
This wouldn't be a problem generally, when this has happened in the past I simply use the erase tool and clear the lines so I can quantise or manually flex as needed however on a recent session Logic has for some reason applied these little white lines to every take on a session where I tracked drums on 9 tracks, this has made the session run painfully slow and even trying to manually erase these flex lines is taking too long.
It appears to happen more often when I group tracks and phase lock audio, has anybody had similar issues? is there a simple fix I'm overlooking?
Thanks

I have the exact same problem, right after I updated to 3.1.3. I think this is a bug. Anyone else have the same problem, and if so have you found a fix for it?

White horisontal line

Similar Messages

Maybe you are looking for