White horizontal streak across captured video

After I capture video on my MSI g4 4200 vtc8x and I play it back I get a horizontal white streak across the middle of the captured area. It takes up 2/3 out of the middle.
Anyone having the same problems.
David

Oh for goshsakes, do I have to do all the research around here!
While sticking with one brand of tape, indeed, even one kind of tape within a brand, has been the recommended mode of operation for years, there has been commentary that changing out brands of tape very frequently is also not as bad as everyone has been lead to believe.
Why, where do I get this heresy from? Why, Adam Wilt, that's who! http://www.adamwilt.com/Tidbits.html Scroll down the page for further info.
By the way, Adam can be found penning an excellent column along with other insightful industry folk at http://provideocoalition.com/

Similar Messages

Horizontal Lines while Capturing video in Premiere Elements 12

Problem:
I have a Sony DCR-TRV80 where video is captured on Mini DV tape. It connects to my PC via FireWire. PC has i7 CPU, Win 7 64bit. 8gig ram, raid 0 hard disks, nvidia video card. Lots of hard disk space.
When I capture video, as it is captured, I get horizontal lines whenever there is motion (either a subject is moving OR the camera is moving). This is seen in the capture window of Premiere Elements 12
The Project Settings:
I have tried several but the one that does not give me a warning is DV Standard 48khz & DV Widescreen 48khz. Both setting details show them as being interlaced (frame rate of 29.97 & size of 720h 480v).
Additionally, I have tried several other Project Settings and still get the same result.
What I See:
When I am capturing the video, I see the horizontal lines. When I output the image, I still get the horizontal lines (all seen on my PC).
My goal:
To capture my videos and have them at high quality so I can edit them to show on my TV to the family. I also would like to be able to see them on the PC without the annoying (and dizzying) horizontal lines.
Any thoughts or help would be greatly appreciated.

I looked at the manuals, etc. from Sony and could not find out much about the output of the camcorder. So best I can tell from your posts, the Sony DCR-TRV80/ Mini DV tape is interlaced natively.
I then did an output to a DVD and played it on my TV/DVD and no interlacing (actually minimal) was apartment.
I was unable to output to YouTube since it would only do it if it also uploaded the video to YouTube which I did not want to do.
So I outputted to AVCHD which seemed to be progressive output. The horizontal lines were definitely much less but still noticeable especially if I make the player larger.
I am just struggling with what I thought as high quality camcorder and prosumer program that I can not see it nicely on the computer or at something a bit larger than a tiny thing.
What can I try to check into this? I am glad to do whatever it takes on my end to learn or correct what I am doing.

White horizontal lines across the bottom of Macbook display

Shortly after I turned on my Macbook last night, the bottom of the screen started to flicker and solid white lines appeared across the bottom of my screen. They go up roughly a couple inches from the bottom, and fade towards the right of the display.
When I restart my computer, They reappear as macosx is loading.
When I mouse over these white lines, the cursor is unaffected, yet they dont appear when I screenshot.
I've gone back through all the discussions but couldnt find any solutions =S
Ideas?

I think you may find hope with this article:
http://docs.info.apple.com/article.html?artnum=303319
The effect is rare but not unknown. Unless it's a hardware issue, you might be able to use this fix.

White Rectangle Box on Captured Videos

Has anyone suffered from the same problem? When I try to record a video clip from a video cassette (VCR) onto my computer, there is a "huge" rectangular white box covering the middle of the video clip on the playback. One of my friends who also has a MSI G4 card had the same problem. I've tried using a few different programs and a few different encodings, but none seem to fix the problem. Can anyone give me an advice? PLEASE!
Using MSI G4 Ti4200 8X
WinXP
Analog recording "composite"
Thanks in advance.
Isumi

Nayre,
I have that same problem sometimes. I have figured out the shape of mine is iTunes. The way I can make the box go away is to open iTunes again and close it right away. The box usually only appears when I have iTunes open for a long period of time.
Try figuring out what window is shaped like your box.
Joe

Why am I seeing a thin white horizontal line on my 27" iMac?

Why am I seeing a thin white horizontal line across the center of my monito?

Obvious suspects are the monitor itself or the video card.
Boot in safe mode and see if the line is still there (just to see what happens when quarts extreme isn't running).

Source Monitor has horizontal lines along the video

Hi,
In the source monitor [only after the video is rendered] I get these horizontal lines across the video. Looks like this http://yfrog.com/7bpremierproblemj
I was wondering if anyone knows how to fix this? Also, the rendered file is fine which really confuses me and if I click on the video in the source monitor then it is restored back to normal, until I click off it then it goes back to having those lines.
Thanks
PC specs:
Intel quad core Q8300 2.50ghz
4Gb RAM
ATI Radeon HD 9570
500Gb Hard Drive
120Gb Hard Drive

Thanks for correcting me there 'vertical line'.
I've recently installed new drivers and I still have that problem. Driver errors wouldn't explain why the video is fine when I import it. If my computer struggled to play the video then the exported file would have the vertical lines to, however it is fine.

MSI GF4-TI4800SE (VTD8X) - White Square in Captured Video?

Hello,
When i try and capture video I get a big white bar across my captured video. I have the latest drivers, and Windows Xp.... any suggestions?
Thanks
Jon M.

Our forum "Search" option brings back a lot of decent results.
Click on the icon at the top of this forum and enter "white bar" (without parenthesis), in the "Search for keyword" select match exact phrase, under "...where and how", select "Multimedia (VGA and optical drives)" don't change anything else and click on the "Search" button.
You should get at least 11 results.
some were reporting reverting to an older capture driver solved the problem. You are on your own, as I didn't take the time to see when these posts were made and/or if the older version of the capture drivers are available here.
You may have to look to a third party solution or a website, like Driverheaven or guru3D............Nvidia may help too but I do not know. Make sure you uninstall the capture driver properly before you install the other.

Weird horizontal white lines going across the screen

I've had my nano 4g for around six months. When I first bought it, there was a single white line going across the top of the screen. It never really got in the way, so I didn't bother exchanging the ipod. Recently, another white line of pixels appeared lower on the screen. This line is there even while I reset it.
Besides replacing the screen or exchanging the iPod, is there anything that I can do to fix this?

It may (likely) be a video card issue. There is a "known issue" with certain iMacs made in a certain timeframe (2011-12 I think), and one of the telltale symptoms is vertical lines showing up on your display. Go to Apple's website (https://getsupport.apple.com/) to find out how to get support, then either call their service line (they usually pick right up) or take it into your nearest store's Genius Bar. They'll first check if your iMac's serial number is on the list of vulnerable machines, and then they'll have to do a diagnostic to prove that's the problem -- if your serial number's on the list and it fails the diagnostic, they'll replace the video card for free, even if you're not covered by AppleCare (and if you are, it's free regardless).
My iMac just had this problem, there were lines sometimes and just weird display issues other times. Eventually it just grayed out altogether and I couldn't use it. So it's likely your display problems will worsen if you don't get it looked at.
It took them about a week to ship the new video card over, install it, and return the iMac to me.
Good luck!

White band when capturing video

When capturing video I get a periodic white band covering 75% of captured video using all Sonic MyDVD, Windows Movie Maker, and ShowBiz software. I have a NVidia FX 5600 card usingWin XP home. The band lasts for 5 to 15 seconds, but is not at a regular rate and sometimes it doesnt happen at all when recording 30-60 minutes of video. Am downloading updated drivers right now but asking for further ideas.

sctbrd,
I have the exact same problem as you do with my Fx5600-vtr-128 capture card..
"jorge' does also have the same problem..Looks like it's systemic with the Nvidia card or drivers not being able to work with the WDM driver..I'll try to post a screen shot but jorge already has and I'll bet if you check his post you will find your exact bar or srtip...
Good luck,
jolphil

Problem capturing video white premiere elements 8

I have download premiere elements 8 trail ver.and I have the black magic's intensity pro capture and editing card.
While I tray to capture video the premiere dose not give me the option to capture directly from the card.
It is possible to capture using black magic's software and import the fail bake to premiere.
Is there an easy way to do so. Is it possible to capture video using premiere elements 8?
with thanks
aviad

>using black magic's software and import
If you are able to create a standard DV AVI type 2 file with 16bit 48khz sound, that will import (this is for SD video)
For HD video, if that is what you are using, you will need to report back what CODEC is used with that card

Why do I have white horizontal lines on my Macbook Pro Retina?

When I am using my 15" Macbook Pro, there are often white horizontal lines that run across the screen. It usually happens when I am watching a video, typing, scrolling or just sitting on the desktop. There are days where the screen is perfect and there are no problems; there are also days where it happens so frequently that some videos becomes unwatchable due to the distracting lines flickering and flashing on the screen. They don't stay all the time but I'd love to know what the problem actually is. Thank you for reading, and please help me out.

Hi there JohnRendleman,
I would recommend taking a look at the troubleshooting steps found in the article below.
Apple computers: Troubleshooting issues with video on internal or external displays
http://support.apple.com/kb/HT1573
-Griff W.

Unable to capture video from VHS through DAC-200

(Running Final Cut Pro 5.1.4)
I have a DAC-200 to hook up my VCR to my G5 in order to capture video from VHS tapes into Final Cut. I had this set-up working a few months ago, but it was disconnected to rearrange equipment and now I can't get it working again. I have followed the advice from the DAC-200 installation instructions and advice from other forum topics but can't seem to get it to work. I finally was able to get something in the log and capture window besides "preview disabled" and "cannot capture because there is no video." I now can get Final Cut to capture video, however it only captures a blank black screen (and this is all I can see in the preview window).
I've triple-checked every cable hook-up, the G5 recognizes the converter box, the video tape plays fine to a tv. I've even had our IT-guy here at work come check out my set-up for help and he can't figure out what is wrong either. (He did get my log&capture window to get white fuzz in the black screen at one point though. Does that mean anything?)
Any help is greatly appreciated! (I'm happy to answer any other questions too.) Thanks!

I had difficullty with the X.4.10 plus QT7.2 and put my info on the Forum as well as sending feedback to Apple. Shortly afterwards, Apple brought out a short security update which I downloaded and, hey presto, I was then able to use QT7.2 with OSX.4.10. It may be that you missed out on the later small update to QT7.2..... ? Another factor I found was that some little while later I again had a problem so I again installed QT7.2 and over-installed FCP5.1.4 which has resolved my problems for the time being. Worth a try if you still can't get through on the DAC.
Ron.

White horizontal line on macbook pro retina display

When I scroll through photos, sometimes a white horizontal line will span the screen for a short time. It will span the whole screen for less than a fraction of a second so it was difficult to take a photo of it. I managed to do it but here the line is only halfway across the photo I was looking at.
Does anyone know what this line is and how I can avoid having it?

Take the MBPr back to an Apple store genius bar and have the techs check it out while still under warranty...a graphics module problem will need their attention.

Photosmart C4780 Mac OS 10.9 scan clear on preview, but saves black with white horizontal stripes

I'm having difficulty figuring out why my scanner all of the suddens saves all scanned documents (.pdf, .jpeg, .png) as a black document with white horizontal stripes. The preview scan from the utility looks fine.
I recently updated my Mac to OS 10.9.2
I have uninstalled all HP utilities and drivers and reinstalled them with all updates.
Printing works fine, as does copying.
I scan a lot of forms, so this is disconcerting.
Thanks for any help.
PS: I see that this is an issue that seems to have been solved for others, but my printer/scanner is not one of the ones listed. Is there another driver to try?
More info: Here is the error code log:
E [04/May/2014:21:42:15 -0500] Unknown directive BrowseAllow on line 23 of /private/etc/cups/cupsd.conf.

Hi,
This is a known compatibility issue with the HP Scan application, which is not supported on 10.9.
You may scan using Apple's Image Capture or Preview as listed as a workaround in the following document, a Full Feature Software for your printer is not available for the operating system:
http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&dlc=en&docname=c04028214&lc=en&jumpid=reg_r1002_us...
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

Horizontal lines across the screen of my Vision:M, need he

I have had my player since Janauaryexcuse me, February and have not had a single issue until today. I turned it on, and there are thin, horizontal, white lines running across the screen. They seem to be most intense over the text at the top left hand corner and if there is any text or picture in the main portion of the screen. I have no idea what has caused and what, if anything, I can do to fix this. I haven't dropped it, had it near any magnetic or other electronic devices, left it in excessi've heat or cold or... anything. I've been babying this thing and now the screen is barely readable when on. Anyone know what's up with this Will I have to return this for repairs Message Edited by appetencexx on 09-26-200709:02 PM

I bought one on December 24th 2006, didnt drop it or abuse it, after 4 months the same thing happened, I was out of luck because the 3 month labour warranty was up.
I was told by creative to mail it to their office at my own expense blah blah blah. A quick google search informs me it is a common problem and creative pretends it's your fault the unit has become useless, people also had horrible experiences with creative tech support, so after spending upwards of $400 already to purchase the Vision M 60GB, I decided I wasted enough money and time with this company and I now use the unit as a fancy 60GB portable hard drive.

White horizontal streak across captured video

Similar Messages

Maybe you are looking for