White jagged lines around text

I've just created some text with gradient it appears with strange white jagged lines arount it.
it's hard to notice them, but they're very disturbing.
(I'm talking about the text under the illustration)

Can't see any jagged lines at this zoom level. Can you please post another screenshot after zooming in some more with the Text selected? Include the Appearance panel in your screenshot.

Similar Messages

  • Odd lines around text in dissolve

    Hi Folks,
    I have been experiencing some odd lines around text when I am dissolving and can't figure out why. The text is generated from FCP and these lines only appear after rendering. Prior to rendering I can step through the dissolve and all is well. I have tried changing the compressor setting for the sequence to all flavors of ProRes, and even uncompressed, and it has no effect. The only thing that did have an effect was to change to an additive dissolve from a cross dissolve. However this makes the dissolve less linear and unacceptable.
    All of the effects handling is being done by Final Cut so there's no third party hardware in the mix. I am running on a 17" MacBook Pro, OS 10.5.8 and FCP 7.0.1 with motion filtering set to best.
    Additionally here is a link to an image grabbed from the timeline showing what I am experiencing.
    http://s629.photobucket.com/albums/uu20/BTVmike/?action=view&current=Dissolvelin es.png
    Thanks in advance,
    Mike
    M2 Digital Post Inc.
    San Diego, CA.

    I tried the Outlined Text generator and still have the issue. If I add an outline it actually gets worse. I did however try Boris and with that it goes away. This is really odd and I wish I knew what was causing it. For now though I guess I stick with Boris.
    Thanks
    Mike

  • White lines around texts with object effects applied

    I am having a persistent problem with InDesign's output of PDFs when I have applied object effects to text boxes.
    When I use an effect—such as emboss (shown in samples) or outer glow—on a text box, the PDF renders it with white lines around the text boxes (sometimes with more than one).
    See the attached samples; the boxes are clearly visible with a 3rd party PDF viewer, such as Skim; less so with Acrobat Pro, but still there. It's there when I open the PDF in Photoshop, as well.
    I've tried playing with transparency flattening settings, and with merging the layers into a single layer. No help.
    The sample shown has an emboss effect applied, transparency flattening set to high resolution (ignoring style overrides), and a single merged layer.
    Any help?
    In Acrobat Pro:
    In Photoshop:
    In Skim:

    Thanks so much, Bob.
    My printer requires that I use the PDF/X-1a:2001 standard for PDF export, which means that it must be Acrobat 4 or later compatibility.
    Also: I don't see how to NOT flatten, when exporting PDF for print; the options for flattening are "low resolution," "medium resolution," or "high resolution"—but there is not an option to NOT flatten. Do you know a work-around for this?

  • Need to add a cut line around text with a stroke

    This has been driving me nuts for years and I've often found ways to "kind of" accomplish this, but I figured someone here might be able to help.
    Create text, convert to outlines, add a stroke. Ok now I want to add a cut line around that entire thing so it's dye-cut out on vinyl. My cut line is just a stroke with a color defined in my pallet. I can create 2 strokes, but I can't figure out how to get one to go to the edge of the other. I also tried duplicating the image, creating just an outline, but it's impossible to get it exactly outlined by hand.
    If I'm not explaining this right, please let me know.
    So there I have the text, converted to outlines, white fill and gold stroke. I need to be able to dye-cut this. If you add a new stroke, it's on top of the old one. Basically I want to add a stroke, to the stroke, but only the outside.
    Thanks in advance!!

    Thank you Larry. I kind of followed what you said but I think there's some steps missing here?
    I'm glad you showed me how to create additional strokes without creating outlines, I was never clicking above "character", I had to click above it to add a new stroke, if you have the text selected, it's greyed out.
    Ok so I created a new stroke, then selected it, went to FX > Path > Offset Path. I chose 0.02 (closest I could seem to get, but not perfect, ok in some areas, bad in others), miter joins set to 4? Are those the same settings you used? You didn't tell me how much you offset yours. Then I selected the offset path stroke and went object > expand apperance, but it didn't seem to do anything? It just removed the offset path FX option on the stroke? This is where I'm pretty confused. Why even do the step after the offset, couldn't I just stop there and print?
    After adding a stroke and offsetting
    After selecting Object > Expand appearance.
    As you can see, like on the C. There is a gap between the cut line and the stroke at the top, but there's no gap on the left side, but there is on the right, and there is on the bottom as well? If I printed this, I would get white fill, gold stroke, and then another white stroke basically.
    Thank you for your patience, I'm self-taught but over the last 4 years of using it every day I'm still learning new tricks!

  • What are the blue lines around text in a text box in Pages 09?

    I'm now seeing blue lines around all of the text in any text box in my Pages layout document.  Its a bit annoying as it makes it hard to see the layout when I'm working in the text box.  See below.  Just curious if this an issue or some undocumented feature I'm not aware of

    Any text was copied and pasted from documents not the web.  Interestingly, if I add a new text box, the "Type here to enter text" also has the blue lines around it.  However, if I select all and delete that text, I can now type text without the blue lines.
    Also, if I create a new page layout document and add a text box, there are no blue lines.
    Its all very strange and seems to be eluding everyone.
    Thanks however, for your help.
    jm

  • Lines around text boxes

    how can i add lines around a text box?

    PeterBreis0807 wrote:
    Sorry lupunus that information is wrong.
    You are right with that.
    I've mismatched the tabs.
    So, go to Inspector
    Graphics
    Line
    Sorry but I haven't English menus in pages.

  • White jagged edge around masked image in InDesign CS2

    I have an image with a black background which I have masked out that I'm placing into a document in InDesign CS2 that has a black background. There is a jagged white "halo" along he masking line that gets worse the farther out you zoom and disappears if you zoom in closely. What can I do to to make the halo go away when I'm zoomed out to a normal distance? I want to feather the edges of the placed photo, but when I do this, it includes the white halo in the feather and creates a grey cloud around the image.

    How does it print? That's the important thing. If the preview's really bothering you set the image's display quality to High Resolution. My guess is that InDesing generated a low-resolution preview when the image was placed and in the downsampling, the edge of your mask was antialiased, producing gray pixels at the edge.
    You might get acceptable results using a clipping path instead of a mask. That way the edges will not be antialiased because the edges of the image will be hidden by the clipping path.
    Make sure the Black in your image matches the CMYK values in the black of the page.

  • How do I get rid of various lines around text boxes when using navigation panes

    How can I get rid of these various lines that are displaying sporatically around different text boxes . . . but only when the navigation panel is displaying?  I previously had the issue and changed the text box properties to no fill.  It fixed the problem in the document with no navigation panel, but once the navigation panel is displayed the lines appear.  And yes, I fixed the text box properties before creating the bookmarks for the navigation panel.

    Every device, browser and browser version has its idiosyncrasies.
    Just using a stroke and a drop shadow should not have been enough to require Muse to convert the page fill to an image. Were/are there also other effects on the page? Are the page corners slightly rounded?
    Bevel and Inner Glow definitely require an image to be created. Most other effects/properties do not.

  • Blue lines around text

    I have written text and blue lines appear around the text.
    Also i cannot mark words for the wordlist in this text.
    How can i make normal text from this part?

    Those indicate text flow.
    See this thread: Unwanted text flow applied to Text Boxes after layout of page is modified

  • IPhone5 touchscreen "develops" grey lines around text and becomes unresponsive

    My original iPhone 5 has developed another issue with the touch screen.
    When switching the phone on after a few moments the touchscreen begins to "develop" grey lines, both vertical and horizontal around the text on the screen, which eventually renders the touchscreen inactive after approx 2 minutes.  The development of the grey lines is quicker at cold temperatures, e.g. outside
    To clear this issue I have to switch the phone off and on again (not power down).  This is now making it very difficult to browse the internet, and write messages.  It is also becoming increasingly difficult to swipe to answer calls.
    I am up to date with system upgrades, so currently on iOS 8.1.1(?)
    This is the second issue I've had with the touchscreen in 2 months, and I'm beginning to wonder if I should replace the phone all together :/
    Does anyone have any insight into this issue/had similar problems, and... is it fixable?
    Thanks!

    It is very possible, but first things first.
    This is the second issue, what was the first one? What user troubleshooting have you tried?
    What do you mean about switching the phone off and on again no powering down? What do you call turning the power off?
    As far as being fixable, first need to know what you have done as far as trying to fix the problem.

  • White fringe appears around text in exported images?

    Hey all, I'm having some problems when I export an image that has no background and antialiased text. No matter what format I save it in or in what way I save it (Save for web and devices, Save as), this white outline always comes up. However, in photoshop, I never see this.
    Below is an example, where on the left is a screenshot of the image in photoshop with a black background layer underneath it, and on the right is the .PNG after export with a black layer underneath.
    http://img198.imageshack.us/img198/4483/whitefringe.png
    Can anyone explain why this is happening and how to fix it?
    -Trey

    It is PNG 24 you're using, right?
    You actually appear to have a light fringe in both cases in the 'a'.
    What layer styles do you have active?  I 'm thinking you may have an "inner glow" effect active.
    I'm just not seeing the fringe that you are when I mock up what you've done, but I'm just guessing at the effects you've used.
    Can you post a small PSD with these fonts in them?
    Here's the PNG from the above:
    -Noel

  • White boundary line around flash movie

    Hi,
    When I use a flash movie on an HTML page it all looks good in
    Mozilla Firefox. In IE on the other hand, it sucks, because when
    you move your move over the flash movie you see a white boundaty
    box. Which makes it all look very silly.
    How do I get rid of that?
    Thanks in advance for any help you might be able to give me.
    FatalDestiny

    uh oh - here we go again - duck and cover!!!!!
    If i had a nickel everytime this was asked in the past few
    months i would have....let's see - go here:
    http://groups.google.com/advanced_group_search?q=group:*flash*&hl=en&lr=&ie=UTF-8&oe=UTF-8
    (the google archive of the forum)
    and search for "active content".
    A total of 362 (and rising everyday) returns.
    Multiply that by $.5
    I think I would end up with $181. (is my math correct?)
    Anyway you get the point. Search the forums first - it was
    just asked and answered at least twice
    just yesterday. It unfortunately will be asked again today a
    couple more times, and then tomorrow
    and the next day and....
    Most of us are simply too tired to even respond to this
    anymore but we understand that searching for
    the right terminology is often hard to discern.
    But here's the url that has been posted here a couple hundred
    times already - guess it can't hurt to
    paste it again :)
    http://activecontent.blogspot.com
    If you search google for "active content" you will realize
    just how popular this little bit of tech
    news was/has been over the last 6 months - been all over
    blogs and news sites for a while.
    There are methods to combat this on this site (yes,
    adobe.com) and all you have to do is search
    adobe to find:
    http://www.adobe.com/devnet/activecontent/
    An entire section devoted to this issue.
    When you hover over any active content in IE you will see
    this:
    http://www.mudbubble.com/staging/ac.jpg
    See the little tool tip instructing you what to do? If you
    google that ("Click to activate and use
    this control" or similar), you will find 2,050,000 returns
    (wow)
    ~~~~~~~~~~~~~~~~
    --> Adobe Certified Expert
    --> www.mudbubble.com
    --> www.keyframer.com
    ~~~~~~~~~~~~~~~~
    Wutacrock wrote:
    > apparently the thread is not in the general forum
    anymore. can anyone help with these white boundary. how can i get
    rid of them? i'm trying to make a website and i can't stand these
    boundaries.

  • White lines around black

    I know that some similar things have been discussed.  The only reason that Im bringing this up is that some have said that a white jagged line around a black object will not appear in print, and to check it by making a pdf out of it.  I made a pdf and the white line still shows up.  If I take this to the printer tomorrow is the white line going to print if it shows in the pdf?  or do I have nothing to fear?
    Thanks for your help!

    You can tell if it is only a preview artifact by zooming in incrementally and seeing if the white increases proportionally or of it stays abut the same thickness as you zoom in closer.
    Like this

  • How to draw white border(only corner) lines around camera view finder

    Hi. You know those white corner lines around the camera view that is found on most camera apps, how do I draw those lines around the camera view? I'm developing a video camera app and now I want to draw those lines to indicate where the camera view finder
    is. The white line starts at the top left corner of the camera view(horizontal) then stops about one quarter and starts again at the other side(top right). The same at left, right and bottom side. It shouldn't be a full square/rectangle just the corners. I
    think you understand what I'm talking about now. How can I draw just "video camera corner lines"? After this question I want to ask you how to change the resolution like to 176*220, 240*320 ect and what the available resolutions is for capturing
    video-clips. For now just the white corner lines of camera view. Thanks in advance:-)

    How do I draw lines and shapes on top of the camera view finder(cvf)?
    +how do I show the battery life bar on cvf?
    +how do I programmatically add text on the cvf?
    +how do I make a connection request? (connect to a URL)?
    +how do I change the resolution of the video camera? What is the acceptable values for resolution?
    +how do I listen for touch events on the cvf?
    Thanks

  • Dashed line around iCal appointment

    I have seen this posted in several areas but no solution to be found as of yet.  SOMETIMES when I create an appointment in iCal, I get a clear background with a white dotted line around the appointment.
    Each time I create an appointment, I invite my wife.  I always get a yellow exclamation point before her name (or any name/email I use for invite).  SOME appointments have a man with a question mark in the upper right hand corner (these are the ones that have the clear background and dashed line)...
    When I create an appointment, invite my wife, one of three things happen:
    1)  the appointment is created in the appropriate calendar, invitation is sent and I am done.  I do not need to wait for her to accept the appointent.
    2)  the appointment is created, clear background, dashed lines, little man with question mark in upper right hand corner, invitation sent.  When she accepts, the color for the calendar fills the appointment and the dashed line is removed.
    3)  the appointment is created, clear background, dashed lines, little man with question mark in upper right hand corner, invitation IS NOT sent.
    HELP!  This is frustrating...

    Greetings,
    The events where the dotted outline and the little man appear, are they part of a calendar in the "ON MY MAC" section of the iCal sidebar on the left hand side or a different section?

Maybe you are looking for