White light stays on during sleep mode.

When my imac intel goes to sleep the white light blinks only for a short while and then stays on. Is this a problem? I have had this imac since Feb 06 and it just started doing this recently.

blinks going hard drive is sleeping, then stays steady on when display is only asleep
this is the normal proceedure
check your energy saver preference.
things can get more complicated if your display & hard drive are set to sleep at same time
(if this helped you, please mark helpful)

Similar Messages

White 24" iMac lockup during sleep mode

I have recently been having problems with my iMac it won't wake from sleep and has to be unplugged and restarted or every time it goes to sleep it locks up. The light on the front is on but not flashing as it normally does during sleep. I run Onyx frequently and it does not seem to help for long(Maybe 2 days max) I am at the point where I am only using XP in Bootcamp because it seems to run much better than OS X.
Here are my specs:
24" iMac 250 GB internal drive, 500 GB firewire 800, 2 GB Ram.
USB devices: Wacom Intuos 3 tablet, logitech NuLOOQ, HP Deskjet 5940, VXI USB Translator(USB Audio device for speech recognition) Sentinel Safenet Dongle for Lightwave 3d.
Bluetooth devices:Mighty Mouse and Keyboard, Motorola HT820 headset for Telephony
I have disconnected everything I can and it still seems to lock up under OS X So it looks like I'm stuck with XP until I can resolve this. >:(....

First - you aren't disconnecting any device while your computer is asleep are you? This can cause your problem.
Assuming this isn't the cause, let's do an SMC reset. Shut down the computer. Unplug all cables from the computer, including the power cord and any display cables. Wait at least 15 seconds. Plug the power cord back in, making sure the power button is not being pressed at the time. Then reconnect your keyboard and mouse to the computer. Press the power button on the back to start up your computer. Does it now sleep and awake?
If not srojtas is right that one of your peripherals may be the culprit but rather than disconnecting one at a time I recommend that you disconnect everything but your ethernet cable (assuming you have one) and your USB mouse and keyboard. Create a new account and set the computer so that you have to choose which account to log into.
Restart and log in directly into the new account. If it sleeps and wakes up now you know that the issue is your account or one of your devices. One at a time, connect (and install support software for) a device. Does the computer wake and sleep? Move on to the next. You may find the culprit along the way. Removing it may or may not let the computer sleep depending on whether it is the device itself or the software.
BTW - the device at fault could be a USB or FireWire hub.

I have an iMac (Mid 2010) and am running 0sx 10.8.5 and the WiFi always loses connection during sleep mode. I have seen numerous different solutions none of which seem to work. Can anyone help?

I have an iMac (Mid 2010) and am running 0sx 10.8.5 and the WiFi always loses connection during sleep mode. I have seen numerous different solutions none of which seem to work. Can anyone help?

Test after taking each of the following steps that you haven't already tried. Back up all data before making any changes.
1. Make sure the network is on the preferred list by following these instructions. It's important to read the article carefully, as it's the starting point for any further efforts to solve the problem. If you skip any of the steps, the problem may not be solved. Make sure the box marked
          Remember networks this computer has joined
is checked.
2. Follow the instructions in this support article under the heading
          Symptom: After restarting or waking from sleep, my computer might not connect to the Internet
3. Reset the PRAM.
4. Make a note of all your settings for Wi-Fi in the Network preference pane, then delete the connection from the connection list and recreate it with the same settings. You do this by clicking the plus-sign icon below the connection list, and selecting Wi-Fi as the interface in the sheet that opens. Select Join other network from the Network Name menu, then select your network. Enter the password when prompted and save it in the keychain.
5. From the Location menu at the top of the Network preference pane, select Edit Locations. A sheet will drop down. Click the plus-sign button to create a new location. Give it any name you want. In the new location, set up the Wi-Fi service with the same settings you used before. Click Apply and test.
6. Launch the Keychain Access application. Search for and delete all AirPort network password items that refer to the network. Make a note of the password first.
7. Repair permissions on the startup volume.
8. Turn off Bluetooth and test.
9. Reset the System Management Controller.
10. This step shouldn't be necessary, but has been advised by Apple Support in some cases, apparently as a workaround for a bug. Open the Energy Saver pane in System Preferences. If applicable, click the padlock icon in the lower left corner to unlock the settings. Enter your administrator login password when prompted.
Select the Power Adapter tab and uncheck the boxes marked
          Wake for Wi-Fi network access
and
          Enable Power Nap...
if present. Then, if the computer is a MacBook, select the Battery tab and uncheck
          Enable Power Nap...
11. Reinstall OS X.

Why wont my razor turn on ? solid white light stays on .

why wont droid razor turn on ? white light stays on.

I had a similar problem. The phone wouldn't turn on at all, though when I pressed the power button a white light would come on briefly, then one time it came on and stayed on, but that was all. I was told (by Verizon) that once the phone discharges all the way to zero it can be difficult to start up again even if it is plugged into the charger. Plugging it into the charger in the house didn't work, but I tried the car charger and it started charging right away. My theory is that the wall outlet charger does not have enough "oomph" to kick start the phone if it is totally depleted, but the car charger must have more (what? volts/amps I'm no electrical expert) whatever it needs to bring it back and start it charging. Once it got going (at 20%) I brought it back into the house and it charged OK. Wish I would've though of this when the other phone did this a few weeks ago! What I'm thinking is that the outlet charger needs to be redesigned to fix this problem. There is a very good chance that, no matter how good you are about keeping your phone charged, there will be that one time that it discharges down zero and then . . .

Does a mac perform self diagnostics during sleep mode?

does a mac perform self diagnostics during sleep mode? I was told it does about 10 years ago.

Russa wrote:
.. but it you leave it on at night, the OS will run the Unix CRON maintrenance routines.. during 3:15 and 5:30am (not in Sleep mode), the cron tasks will be run.
http://support.apple.com/kb/HT2319
Russa, from the KB article you linked notice that those maintenance scripts are no longer invoked by cron. They are invoked by launchd:
Additional Information
The tasks are scheduled for 03:15 to 05:30 in your computer's local time zone. This is described further in "Mac OS X: Unexplained Disk Activity Produced by 'find' Process." These tasks do not run if the computer is shut down or in sleep mode. If the tasks do not run, it is possible that certain log files (such as system.log) may become very large in Mac OS X v10.5 or earlier.
Therefore no user intervention is required, unless you are running Mac OS X "Leopard" or earlier.
It may seem overly pedantic to bring this up but this common misconception has a tendency to lead people into believing a Mac requires the user to perform maintenance over and beyond what OS X already accomplishes by default.
As others have written, a Mac takes care of its own housekeeping. It is best to simply let it work as designed.

Charging iPod nano on an Intel iMac during Sleep Mode by Firewire

Hi everybody,
I have a question concerning the iPod nano. I know that you can not sync the iPod by Firewire but you can charge it. I also know that charging the nano via USB during Sleep mode is NOT possible. However I had a 3G IPod (connected by Firewire) and it was possible to charge it when the Imac was in Sleep mode. And here comes my question:
There is a special cable for iPods, which has both Firewire AND USB. Is it possible to connect the IPod simultaneously by Firewire and USB to the Imac with the result, that the nano will charge during sleep mode (Firewire) AND is able the sync music (USB) ???
Thank you

Hi lora,
Don't do it! See this post:
Using the iPod Dock Connector to FireWire and USB 2.0 Cable
Which states this: "Important: Never connect both the FireWire and the USB 2.0 connector to your computer at the same time. Doing so can cause unexpected behavior."
Good luck,
maz

Severe battery loss during sleep mode

I have a brand new MBAir and I'm trully intrigued about the loss of batery happening during sleep mode. I've fully charged it on Friday, and, since then it's been on sleep mode. Today, finally turnign it on this night to work a bit, I found it has only 73% of charge! What can be happening? IMPORTANT: My "power nap" mode is OFF since I've bought it and started using and noticing this down charge. Can anyone help me?

I've just solved it all when I noticed I kept plugged in my wireless mouse receptor. Just plug it out before leaving the MBA in sleep mode, and the problem was solved.

IMac 2009 (21 inch) making hard drive noises during sleep mode - normal??

Hi there guys,
I have an iMac 21 inch (2009) , 3ghz C2D, 4GB Ram, 1TB hard drive (the hard drive was upgraded straight thru apple, when i bought it i paid extra for a 1tb hard drive, its not a DIY hard drive upgrade)
aniways, I recently noticed that during sleep mode, occasionally (not all the time) I can hear some faint clicking / hard drive noise, which is really weird because i put the imac in sleep mode and it really shouldnt be doing that no?
My 13 inch macbook pro 2010 never does this in sleep mode, its always dead silent
Im just wondering if this hard drive accessing / clicking noise during sleep mode is normal in imacs??

Im just wondering if this hard drive accessing / clicking noise during sleep mode is normal in imacs?
No it should not be doing anything but sleeping. The SMC controls sleep, try resetting it.
Reset the SMC
• Shut down the computer.
• Detach the computer's power cord.
• Press and hold the power button for 5 seconds.
• Release the power button.
• Reattach the computers power cable.
• Turn on the computer.
Dah•veed

Kernel panic during sleep mode

Could someone possibly shed some light on a 0x400 trap. I got the following yesterday afternoon:
"Unresolved kernel trap(cpu 0): 0x400 - Inst access DAR=0x000000003BF2D160 PC=0x0000000000000000
Latest crash info for cpu 0:
Exception state (sv=0x49A57780)
PC=0x00000000; MSR=0x40009030; DAR=0x3BF2D160; DSISR=0x40000000; LR=0x002C8250; R1=0x21D93D20; XCP=0x00000010 (0x400 - Inst access)
Backtrace:
0x002C81EC 0x002C5874 0x005396EC 0x0003C744 0x000A9894
Kernel loadable modules in backtrace (with dependencies):
com.apple.iokit.IOSCSIArchitectureModelFamily(1.4.4)@0x52c000
Proceeding back via exception chain:
Exception state (sv=0x49A57780)
previously dumped as "Latest" state. skipping...
Exception state (sv=0x3BC28780)
PC=0x00000000; MSR=0x0000D030; DAR=0x00000000; DSISR=0x00000000; LR=0x00000000; R1=0x00000000; XCP=0x00000000 (Unknown)"
Trying to decipher the system log seems to indicate a problem with my USB hub, the iMac doesn't seem to be able to communicate with it. This has happened before - usually there are no applications open and the computer is in sleep mode. The problem then occurs when I try to wake it; usually a light blinks on the Iogear hub for a short time and then goes out - when I get a panic, three lights stay on continuously, the fans are whirring and absolutely nothing happens, the screen remains black. There also is no pulsating light on the front bezel of the iMac. The only solution is a forced shutdown. Once I restarted, all seemed well again. BTW, this hub (hub/card reader combo) does not have any lights on when everything is working as it should.
I also just remembered that occasionally, my keyboard or mouse (both plugged into the hub) will become unresponsive; once I unplug them and plug back in, they're fine. I've already tried a different hub (Macally) and the very same thing happened. I don't know if these could be related?

Hi, Barbara.
The line
Unresolved kernel trap(cpu 0): 0x400 - Inst access
in your panic log indicates an 0x400 (Instruction Access) panic. An 0x400 (Instruction access) panic occurs when the processor cannot access the next instruction to be executed.
Potential causes include RAM problems, hard disk corruption, and programming errors. "Programming errors" in this case can include invalid instructions and violations of protected memory, however it is often difficult to differentiate a programming error from a RAM or hard disk problem since the latter two issues can cause a valid instruction to appear invalid. Likewise, this opens the door to the potential for processor errors, i.e. defective processor or other problems with the logic board.
Kernel loadable modules in the backtrace are flagging
com.apple.iokit.IOSCSIArchitectureModelFamily(1.4.4)@0x52c000
This indicates an issue with "...SCSI, USB (Storage), FireWire SBP-2 and ATAPI devices."as described here.
It could very likely be the USB hub/card-reader combo you cited, or it could be a deeper problem with your Mac. Does the problem occur when you have media in the card reader of the USB hub/card-reader combo?
See my "Resolving Kernel Panics" FAQ. This FAQ includes step-by-step instructions for identifying and resolving some of the most common causes of kernel panics.
My FAQ is a roadmap: start at the beginning and work through to the end, following the instruction in the order specified, including the "If all else fails..." section if a cause or resolution is not found in an earlier troubleshooting step therein.
Good luck!
Dr. Smoke
Author: Troubleshooting Mac® OS X
Note: The information provided in the link(s) above is freely available. However, because I own The X Lab™, a commercial Web site to which some of these links point, the Apple Discussions Terms of Use require I include the following disclosure statement with this post:
I may receive some form of compensation, financial or otherwise, from my recommendation or link.

Getting the ipad to stay in standby/sleep mode

I use my Ipad as an alarm clock when I am on the road. I put it in standby mode but it keeps coming out which is annoying when you are trying to sleep. How do I get it to stay in sleep mode but still wake me up?

Dedington-
If you double click the Home button, a list of recent Apps shows up across the bottom of the screen. If you press and hold on one, they start to wiggle and a red minus sign appears on each. Tap the minus sign of all Apps other than the one for your alarm clock. That removes them from the list, and stops any that might be running in the background.
Fred

Blue/White light staying on all the time - Houston, is there a problem?

I use a 1tb Free Agent drive for Time Machine, and it has a blue-ish white light that comes on when it's working. For instance, it always comes on when I wake up the machine.
This morning, it's on - and it's staying on. The drive is not full. It appears to be backing up properly. But the darn light is on. So I ask, Houston - do we have a problem here?
Thanks.

Digital Gee wrote:
This morning, {the light is} on - and it's staying on. The drive is not full. It appears to be backing up properly. But the darn light is on.
Open the Time Machine panel of System Preferences to see what Time Machine is doing. I'd also look at the Spotlight icon at the right end of the menu bar. If there's a dot in the middle of it, Spotlight may be trying to index the external drive. If you don't want it to do that, you can add the drive the the Privacy tab of the Spotlight panel of System Preferences.

Black screen during sleep mode (10 second lag)?

Okay, so I love my Mac and I freak out every time I notice something weird. Call me crazy.
Macbook Pro Retina (Late 2013) OS X Mavericks 10.9.4
Whenever my Mac mac goes into sleep mode (idle) and I try to reach my log in screen, a blank black screen shows up. I can move the cursor around however, it takes 10 seconds for my user screen to show up. I restarted my computer and it's doing the exact same thing. Should I be concerned?

Blank (lighted, but black) screen with cursor at bootup
[SOLVED] - Macbook Air Sleep/Wake problem
Dark screen on start-up can only see curser

Pismo shuts off during sleep-mode

Hi
I realized that my Pismo occasionally shuts off while in sleep mode. When I press a key to wake it up the pulsating green light turns off and I need to press the on/off-key. The computer then reboots normally.
Thanks! Felix

Hi
In meantime, it is not "occasionally" but always.
1. PMU-reset with the small button on the rear did not help either.
2. I believe I cannot hear the HD after opening the lid. The flashing green light turns off. I simply press the on/off-button and the Pismo starts up as if I turned it off.
3. HDD is new, Seagate 120 GByte.
Actually a few weeks ago I obtained a Pismo with a defect power borad and swapped CPU-cards due to my bad L2-cache. Worked great!
Afterwards I realized, that the casing of the other Pismo was in much better shape (mine has a crack next to the bottom Apple-logo and a very shiny upper part). What I finally did was the following:
Stripped both down to the point where practically the logic board and metal frame was the last part in there.
Built up on the lower part of the ebay-Pismo with my power-board and practically all other parts from my own functioning Pismo and with the new HDD. Upper case and keyboard is from the ebay-Pismo, which was apparently used very little.
I guess I will take everything apart again and make sure that my own logic board runs in there. Maybe the logicboard of the eBay-Pismo was damaged together with the power boards and AHT doesn´t recognize it (System Profiler shows an error with regards to the sound system, but sound works).
Strange, if I could only tell whether this is hardware related.
Thanks for any input
Felix

Why does my mac mini shutdown during sleep mode?

After I put the Mini into sleep mode, it shuts itself off after a few hours. I tried resetting the SMC per instructions from another forum post (turn the Mini off; pull the power cord for 10 seconds; plug back in; wait 5 seconds; turn the Mini back on) but that didn't work. Anything else I can try?
Thanks,
iBob52

I have the same problem. When only the screen is sleeping, everything is ok. When the MacMini begins to sleep, he just shuts off. Help someone ?
And that's what OPEN CONSOLE says :
15/04/13 13:35:34,000 bootlog[0]: BOOT_TIME 1366025734 0
15/04/13 13:35:46,000 kernel[0]: PMAP: PCID enabled
15/04/13 13:35:46,000 kernel[0]: PMAP: Supervisor Mode Execute Protection enabled
15/04/13 13:35:46,000 kernel[0]: Darwin Kernel Version 12.3.0: Sun Jan 6 22:37:10 PST 2013; root:xnu-2050.22.13~1/RELEASE_X86_64
15/04/13 13:35:46,000 kernel[0]: vm_page_bootstrap: 792724 free pages and 247660 wired pages
15/04/13 13:35:46,000 kernel[0]: kext submap [0xffffff7f80735000 - 0xffffff8000000000], kernel text [0xffffff8000200000 - 0xffffff8000735000]
15/04/13 13:35:46,000 kernel[0]: zone leak detection enabled
15/04/13 13:35:46,000 kernel[0]: standard timeslicing quantum is 10000 us
15/04/13 13:35:46,000 kernel[0]: standard background quantum is 2500 us
15/04/13 13:35:46,000 kernel[0]: mig_table_max_displ = 74
15/04/13 13:35:46,000 kernel[0]: TSC Deadline Timer supported and enabled
15/04/13 13:35:46,000 kernel[0]: corecrypto kext started!
15/04/13 13:35:46,000 kernel[0]: Running kernel space in FIPS MODE
15/04/13 13:35:46,000 kernel[0]: Plist hmac value is    735d392b68241ef173d81097b1c8ce9ba283521626d1c973ac376838c466757d
15/04/13 13:35:46,000 kernel[0]: Computed hmac value is 735d392b68241ef173d81097b1c8ce9ba283521626d1c973ac376838c466757d
15/04/13 13:35:46,000 kernel[0]: corecrypto.kext FIPS integrity POST test passed!
15/04/13 13:35:46,000 kernel[0]: corecrypto.kext FIPS AES CBC POST test passed!
15/04/13 13:35:46,000 kernel[0]: corecrypto.kext FIPS TDES CBC POST test passed!
15/04/13 13:35:46,000 kernel[0]: corecrypto.kext FIPS AES ECB AESNI POST test passed!
15/04/13 13:35:46,000 kernel[0]: corecrypto.kext FIPS AES XTS AESNI POST test passed!
15/04/13 13:35:46,000 kernel[0]: corecrypto.kext FIPS SHA POST test passed!
15/04/13 13:35:46,000 kernel[0]: corecrypto.kext FIPS HMAC POST test passed!
15/04/13 13:35:46,000 kernel[0]: corecrypto.kext FIPS ECDSA POST test passed!
15/04/13 13:35:46,000 kernel[0]: corecrypto.kext FIPS DRBG POST test passed!
15/04/13 13:35:46,000 kernel[0]: corecrypto.kext FIPS POST passed!
15/04/13 13:35:46,000 kernel[0]: AppleACPICPU: ProcessorId=1 LocalApicId=0 Enabled
15/04/13 13:35:46,000 kernel[0]: AppleACPICPU: ProcessorId=2 LocalApicId=2 Enabled
15/04/13 13:35:46,000 kernel[0]: AppleACPICPU: ProcessorId=3 LocalApicId=4 Enabled
15/04/13 13:35:46,000 kernel[0]: AppleACPICPU: ProcessorId=4 LocalApicId=6 Enabled
15/04/13 13:35:46,000 kernel[0]: AppleACPICPU: ProcessorId=5 LocalApicId=1 Enabled
15/04/13 13:35:46,000 kernel[0]: AppleACPICPU: ProcessorId=6 LocalApicId=3 Enabled
15/04/13 13:35:46,000 kernel[0]: AppleACPICPU: ProcessorId=7 LocalApicId=5 Enabled
15/04/13 13:35:46,000 kernel[0]: AppleACPICPU: ProcessorId=8 LocalApicId=7 Enabled
15/04/13 13:35:38,811 com.apple.launchd[1]: *** launchd[1] has started up. ***
15/04/13 13:35:38,811 com.apple.launchd[1]: *** Shutdown logging is enabled. ***
15/04/13 13:35:46,809 com.apple.launchd[1]: (com.apple.automountd) Unknown key for boolean: NSSupportsSuddenTermination
15/04/13 13:35:46,000 kernel[0]: calling mpo_policy_init for TMSafetyNet
15/04/13 13:35:46,000 kernel[0]: Security policy loaded: Safety net for Time Machine (TMSafetyNet)
15/04/13 13:35:46,000 kernel[0]: calling mpo_policy_init for Sandbox
15/04/13 13:35:46,000 kernel[0]: Security policy loaded: Seatbelt sandbox policy (Sandbox)
15/04/13 13:35:46,000 kernel[0]: calling mpo_policy_init for Quarantine
15/04/13 13:35:46,000 kernel[0]: Security policy loaded: Quarantine policy (Quarantine)
15/04/13 13:35:46,000 kernel[0]: Copyright (c) 1982, 1986, 1989, 1991, 1993
15/04/13 13:35:46,000 kernel[0]: The Regents of the University of California. All rights reserved.
15/04/13 13:35:46,000 kernel[0]: MAC Framework successfully initialized
15/04/13 13:35:46,000 kernel[0]: using 16384 buffer headers and 10240 cluster IO buffer headers
15/04/13 13:35:46,000 kernel[0]: IOAPIC: Version 0x20 Vectors 64:87
15/04/13 13:35:46,000 kernel[0]: ACPI: System State [S0 S3 S4 S5]
15/04/13 13:35:46,000 kernel[0]: PFM64 (36 cpu) 0xf80000000, 0x80000000
15/04/13 13:35:46,000 kernel[0]: AppleIntelCPUPowerManagement: Turbo Ratios 889A
15/04/13 13:35:46,000 kernel[0]: AppleIntelCPUPowerManagement: (built 12:18:39 Oct 18 2012) initialization complete
15/04/13 13:35:46,000 kernel[0]: Sleep failure code 0x00000000 0x1f006c00
15/04/13 13:35:46,000 kernel[0]: [ PCI configuration begin ]
15/04/13 13:35:46,000 kernel[0]: console relocated to 0xf80000000
15/04/13 13:35:46,000 kernel[0]: PCI configuration changed (bridge=15 device=3 cardbus=0)
15/04/13 13:35:46,000 kernel[0]: [ PCI configuration end, bridges 11 devices 15 ]
15/04/13 13:35:46,000 kernel[0]: AppleThunderboltNHIType2::setupPowerSavings - GPE based runtime power management
15/04/13 13:35:46,000 kernel[0]: AppleThunderboltNHIType2::start - type 2 sleep enabled
15/04/13 13:35:46,000 kernel[0]: AppleThunderboltNHIType2::start - SXFP method found
15/04/13 13:35:46,000 kernel[0]: mbinit: done [64 MB total pool size, (42/21) split]
15/04/13 13:35:46,000 kernel[0]: Pthread support ABORTS when sync kernel primitives misused
15/04/13 13:35:46,000 kernel[0]: FireWire (OHCI) Lucent ID 5901 built-in now active, GUID 10ddb1fffe5398e0; max speed s800.
15/04/13 13:35:46,000 kernel[0]: rooting via boot-uuid from /chosen: EC8224D4-FF05-331E-BC35-916C3BBA0A3F
15/04/13 13:35:46,000 kernel[0]: Waiting on <dict ID="0"><key>IOProviderClass</key><string ID="1">IOResources</string><key>IOResourceMatch</key><string ID="2">boot-uuid-media</string></dict>
15/04/13 13:35:46,000 kernel[0]: com.apple.AppleFSCompressionTypeZlib kmod start
15/04/13 13:35:46,000 kernel[0]: com.apple.AppleFSCompressionTypeDataless kmod start
15/04/13 13:35:46,000 kernel[0]: com.apple.AppleFSCompressionTypeZlib load succeeded
15/04/13 13:35:46,000 kernel[0]: com.apple.AppleFSCompressionTypeDataless load succeeded
15/04/13 13:35:46,000 kernel[0]: AppleIntelCPUPowerManagementClient: ready
15/04/13 13:35:46,000 kernel[0]: Got boot device = IOService:/AppleACPIPlatformExpert/PCI0@0/AppleACPIPCI/SATA@1F,2/AppleIntelPchS eriesAHCI/PRT0@0/IOAHCIDevice@0/AppleAHCIDiskDriver/IOAHCIBlockStorageDevice/IOB lockStorageDriver/APPLE HDD HTS541010A9E662 Media/IOGUIDPartitionScheme/Customer@2
15/04/13 13:35:46,000 kernel[0]: BSD root: disk0s2, major 1, minor 3
15/04/13 13:35:46,000 kernel[0]: BTCOEXIST off
15/04/13 13:35:46,000 kernel[0]: BRCM tunables:
15/04/13 13:35:46,000 kernel[0]: pullmode[1] txringsize[ 256] txsendqsize[1024] reapmin[   32] reapcount[ 128]
15/04/13 13:35:46,000 kernel[0]: jnl: unknown-dev: replay_journal: from: 9999872 to: 13719040 (joffset 0x13218000)
15/04/13 13:35:46,000 kernel[0]: IOThunderboltSwitch(0x0)::listenerCallback - Thunderbolt HPD packet for route = 0x0 port = 12 unplug = 0
15/04/13 13:35:46,000 kernel[0]: jnl: unknown-dev: journal replay done.
15/04/13 13:35:46,000 kernel[0]: Kernel is LP64
15/04/13 13:35:46,000 kernel[0]: hfs: Removed 21 orphaned / unlinked files and 21 directories
15/04/13 13:35:49,000 kernel[0]: BCM5701Enet: Ethernet address 10:dd:b1:99:4d:38
15/04/13 13:35:49,000 kernel[0]: AirPort_Brcm4331: Ethernet address 88:53:95:30:d6:95
15/04/13 13:35:49,000 kernel[0]: IO80211Controller::dataLinkLayerAttachComplete(): adding AppleEFINVRAM notification
15/04/13 13:35:49,000 kernel[0]: IO80211Interface::efiNVRAMPublished():
15/04/13 13:35:51,849 hidd[46]: Posting 'com.apple.iokit.hid.displayStatus' notifyState=1
15/04/13 13:35:51,854 hidd[46]: void __IOHIDLoadBundles(): Loaded 0 HID plugins
15/04/13 13:35:51,855 fseventsd[47]: event logs in /.fseventsd out of sync with volume. destroying old logs. (2444 17 2545)
15/04/13 13:35:51,873 fseventsd[47]: log dir: /.fseventsd getting new uuid: 04BC97BF-4A25-4AE3-A80C-5E21BE3CED6D
15/04/13 13:35:52,000 kernel[0]: macx_swapon SUCCESS
15/04/13 13:35:52,000 kernel[0]: Waiting for DSMOS...
15/04/13 13:35:52,661 coreservicesd[61]: FindBestLSSession(), no match for inSessionID 0xfffffffffffffffc auditTokenInfo( uid=0 euid=0 auSessionID=100000 create=false
15/04/13 13:35:52,669 mDNSResponder[39]: mDNSResponder mDNSResponder-379.37 (Dec 16 2012 19:43:09) starting OSXVers 12
15/04/13 13:35:52,681 appleeventsd[52]: main: Starting up
15/04/13 13:35:52,684 airportd[64]: _processDLILEvent: en1 attached (down)
15/04/13 13:35:52,705 com.apple.usbmuxd[27]: usbmuxd-296.4 on Dec 21 2012 at 16:11:14, running 64 bit
15/04/13 13:35:52,000 kernel[0]: createVirtIf(): ifRole = 1
15/04/13 13:35:52,000 kernel[0]: in func createVirtualInterface ifRole = 1
15/04/13 13:35:52,000 kernel[0]: AirPort_Brcm4331_P2PInterface::init name <p2p0> role 1 this 0xffffff803c880400
15/04/13 13:35:52,000 kernel[0]: AirPort_Brcm4331_P2PInterface::init() <p2p> role 1
15/04/13 13:35:52,000 kernel[0]: Created virtif 0xffffff803c880400 p2p0
15/04/13 13:35:53,000 kernel[0]: Previous Shutdown Cause: 0
15/04/13 13:35:53,000 kernel[0]: IOBluetoothUSBDFU::probe
15/04/13 13:35:53,000 kernel[0]: IOBluetoothUSBDFU::probe ProductID - 0x828A FirmwareVersion - 0x0032
15/04/13 13:35:53,000 kernel[0]: [BroadcomBluetoothHCIControllerUSBTransport][start] -- completed
15/04/13 13:35:53,000 kernel[0]: [IOBluetoothHCIController][staticBluetoothHCIControllerTransportShowsUp] -- Received Bluetooth Controller register service notification
15/04/13 13:35:53,000 kernel[0]: [IOBluetoothHCIController][start] -- completed
15/04/13 13:35:53,000 kernel[0]: [IOBluetoothHCIController::setConfigState] calling registerService
15/04/13 13:35:53,000 kernel[0]: DSMOS has arrived
15/04/13 13:35:53,000 kernel[0]: m_tail has not been written to hardware: m_tail = 0x00000000, hardare tail register = 0x00000158
15/04/13 13:35:53,686 mds[38]: (Normal) FMW: FMW 0 0
15/04/13 13:35:53,868 com.apple.SecurityServer[15]: Session 100000 created
15/04/13 13:35:54,000 kernel[0]: AirPort: Link Down on en1. Reason 1 (Unspecified).
15/04/13 13:35:54,000 kernel[0]: en1::IO80211Interface::postMessage bssid changed
15/04/13 13:35:54,247 configd[18]: network changed.
15/04/13 13:35:54,248 configd[18]: setting hostname to "Mac-mini-de-Richard.local"
15/04/13 13:35:59,429 com.apple.SecurityServer[15]: Entering service
15/04/13 13:35:59,459 systemkeychain[67]: done file: /var/run/systemkeychaincheck.done
15/04/13 13:35:59,468 configd[18]: network changed: DNS*
15/04/13 13:35:59,470 mDNSResponder[39]: D2D_IPC: Loaded
15/04/13 13:35:59,470 mDNSResponder[39]: D2DInitialize succeeded
15/04/13 13:35:59,496 loginwindow[42]: Login Window Application Started
15/04/13 13:35:59,522 awacsd[56]: Starting awacsd connectivity-78.2 (Dec 16 2012 19:43:29)
15/04/13 13:35:59,527 awacsd[56]: InnerStore CopyAllZones: no info in Dynamic Store
15/04/13 13:35:59,544 UserEventAgent[11]: Captive: [HandleNetworkInformationChanged:2435] nwi_state_copy returned NULL
15/04/13 13:35:59,546 netbiosd[74]: Unable to start NetBIOS name service:
15/04/13 13:35:59,577 WindowServer[88]: Server is starting up
15/04/13 13:35:59,820 digest-service[95]: label: default
15/04/13 13:35:59,821 digest-service[95]:           dbname: od:/Local/Default
15/04/13 13:35:59,821 digest-service[95]:           mkey_file: /var/db/krb5kdc/m-key
15/04/13 13:35:59,821 digest-service[95]:           acl_file: /var/db/krb5kdc/kadmind.acl
15/04/13 13:35:59,822 digest-service[95]: digest-request: uid=0
15/04/13 13:35:59,843 rpcsvchost[98]: sandbox_init: com.apple.msrpc.netlogon.sb succeeded
15/04/13 13:35:59,847 digest-service[95]: digest-request: init request
15/04/13 13:35:59,850 digest-service[95]: digest-request: init return domain: BUILTIN server: MAC-MINI-DE-RICHARD
15/04/13 13:36:00,447 WindowServer[88]: Session 256 retained (2 references)
15/04/13 13:36:00,447 WindowServer[88]: Session 256 released (1 references)
15/04/13 13:36:00,454 WindowServer[88]: Session 256 retained (2 references)
15/04/13 13:36:00,455 WindowServer[88]: init_page_flip: page flip mode is on
15/04/13 13:36:00,000 kernel[0]: en1: 802.11d country code set to 'BE'.
15/04/13 13:36:00,000 kernel[0]: en1: Supported channels 1 2 3 4 5 6 7 8 9 10 11 12 13 36 40 44 48 52 56 60 64 100 104 108 112 116 120 124 128 132 136 140
15/04/13 13:36:00,000 kernel[0]: MacAuthEvent en1   Auth result for: 5c:35:3b:56:ff:71 MAC AUTH succeeded
15/04/13 13:36:00,000 kernel[0]: wlEvent: en1 en1 Link UP virtIf = 0
15/04/13 13:36:00,000 kernel[0]: AirPort: Link Up on en1
15/04/13 13:36:00,000 kernel[0]: en1: BSSID changed to 5c:35:3b:56:ff:71
15/04/13 13:36:00,000 kernel[0]: en1::IO80211Interface::postMessage bssid changed
15/04/13 13:36:00,000 kernel[0]: AirPort: RSN handshake complete on en1
15/04/13 13:36:00,877 WindowServer[88]: mux_initialize: Couldn't find any matches
15/04/13 13:36:00,890 WindowServer[88]: GLCompositor enabled for tile size [256 x 256]
15/04/13 13:36:00,890 WindowServer[88]: CGXGLInitMipMap: mip map mode is on
15/04/13 13:36:00,920 WindowServer[88]: WSMachineUsesNewStyleMirroring: true
15/04/13 13:36:00,920 WindowServer[88]: Display 0x43300b08: GL mask 0x1; bounds (0, 0)[1920 x 1080], 16 modes available
Main, Active, on-line, enabled, boot, Vendor 410c, Model c07d, S/N 144b, Unit 0, Rotation 0
UUID 0x0000410c0000c07d0000144b00000000
15/04/13 13:36:00,921 WindowServer[88]: Display 0x003f003e: GL mask 0x4; bounds (0, 0)[0 x 0], 1 modes available
off-line, enabled, Vendor ffffffff, Model ffffffff, S/N ffffffff, Unit 2, Rotation 0
UUID 0xffffffffffffffffffffffff003f003e
15/04/13 13:36:00,921 WindowServer[88]: Display 0x003f003d: GL mask 0x2; bounds (0, 0)[0 x 0], 1 modes available
off-line, enabled, Vendor ffffffff, Model ffffffff, S/N ffffffff, Unit 1, Rotation 0
UUID 0xffffffffffffffffffffffff003f003d
15/04/13 13:36:00,925 WindowServer[88]: Created shield window 0x5 for display 0x43300b08
15/04/13 13:36:00,925 WindowServer[88]: Created shield window 0x6 for display 0x003f003e
15/04/13 13:36:00,925 WindowServer[88]: Created shield window 0x7 for display 0x003f003d
15/04/13 13:36:00,926 WindowServer[88]: Display 0x43300b08: GL mask 0x1; bounds (0, 0)[1920 x 1080], 16 modes available
Main, Active, on-line, enabled, boot, Vendor 410c, Model c07d, S/N 144b, Unit 0, Rotation 0
UUID 0x0000410c0000c07d0000144b00000000
15/04/13 13:36:00,926 WindowServer[88]: Display 0x003f003e: GL mask 0x4; bounds (2944, 0)[1 x 1], 1 modes available
off-line, enabled, Vendor ffffffff, Model ffffffff, S/N ffffffff, Unit 2, Rotation 0
UUID 0xffffffffffffffffffffffff003f003e
15/04/13 13:36:00,927 WindowServer[88]: Display 0x003f003d: GL mask 0x2; bounds (2945, 0)[1 x 1], 1 modes available
off-line, enabled, Vendor ffffffff, Model ffffffff, S/N ffffffff, Unit 1, Rotation 0
UUID 0xffffffffffffffffffffffff003f003d
15/04/13 13:36:00,927 WindowServer[88]: CGXPerformInitialDisplayConfiguration
15/04/13 13:36:00,927 WindowServer[88]:   Display 0x43300b08: MappedDisplay Unit 0; Vendor 0x410c Model 0xc07d S/N 5195 Dimensions 23.54 x 13.23; online enabled, Bounds (0,0)[1920 x 1080], Rotation 0, Resolution 1
15/04/13 13:36:00,927 WindowServer[88]:   Display 0x003f003e: MappedDisplay Unit 2; Vendor 0xffffffff Model 0xffffffff S/N -1 Dimensions 0.00 x 0.00; offline enabled, Bounds (2944,0)[1 x 1], Rotation 0, Resolution 1
15/04/13 13:36:00,927 WindowServer[88]:   Display 0x003f003d: MappedDisplay Unit 1; Vendor 0xffffffff Model 0xffffffff S/N -1 Dimensions 0.00 x 0.00; offline enabled, Bounds (2945,0)[1 x 1], Rotation 0, Resolution 1
15/04/13 13:36:00,990 WindowServer[88]: GLCompositor: GL renderer id 0x01024400, GL mask 0x00000007, accelerator 0x00003243, unit 0, caps QEX|QGL|MIPMAP, vram 1156 MB
15/04/13 13:36:00,990 WindowServer[88]: GLCompositor: GL renderer id 0x01024400, GL mask 0x00000007, texture units 8, texture max 16384, viewport max {16384, 16384}, extensions FPRG|NPOT|GLSL|FLOAT
15/04/13 13:36:00,993 loginwindow[42]: **DMPROXY** Found `/System/Library/CoreServices/DMProxy'.
15/04/13 13:36:01,000 kernel[0]: Sound assertion in AppleHDAController at line 2677
15/04/13 13:36:01,475 locationd[43]: NOTICE,Location icon should now be in state 0
15/04/13 13:36:02,926 WindowServer[88]: **DMPROXY** (2) Found `/System/Library/CoreServices/DMProxy'.
15/04/13 13:36:03,991 WindowServer[88]: MPAccessSurfaceForDisplayDevice: Set up page flip mode on display 0x43300b08 device: 0x10fade110 isBackBuffered: 1 numComp: 3 numDisp: 3
15/04/13 13:36:08,481 configd[18]: network changed: v4(en1+:192.168.0.107) DNS+ Proxy+ SMB
15/04/13 13:36:08,486 airportd[64]: _doAutoJoin: Already associated to “telenet-6FF6B”. Bailing on auto-join.
15/04/13 13:36:08,498 UserEventAgent[11]: Captive: en1: Not probing 'telenet-6FF6B' (protected network)
15/04/13 13:36:08,502 configd[18]: network changed: v4(en1!:192.168.0.107) DNS Proxy SMB
15/04/13 13:36:08,517 airportd[64]: _doAutoJoin: Already associated to “telenet-6FF6B”. Bailing on auto-join.
15/04/13 13:36:10,789 ntpd[93]: proto: precision = 1.000 usec
15/04/13 13:36:12,030 WindowServer[88]: Created shield window 0x8 for display 0x43300b08
15/04/13 13:36:12,031 WindowServer[88]: Display 0x43300b08: MappedDisplay Unit 0; ColorProfile { 2, "HD 709-A"}; TransferFormula (1.000000, 1.000000, 1.000000)
15/04/13 13:36:12,043 WindowServer[88]: Display 0x43300b08: MappedDisplay Unit 0; ColorProfile { 2, "HD 709-A"}; TransferFormula (1.000000, 1.000000, 1.000000)
15/04/13 13:36:12,664 com.apple.launchd[1]: (com.apple.xprotectupdater[25]) Exited with code: 252
15/04/13 13:36:13,254 WindowServer[88]: Display 0x43300b08: MappedDisplay Unit 0; ColorProfile { 2, "HD 709-A"}; TransferFormula (1.000000, 1.000000, 1.000000)
15/04/13 13:36:13,271 launchctl[116]: com.apple.findmymacmessenger: Already loaded
15/04/13 13:36:13,291 com.apple.SecurityServer[15]: Session 100004 created
15/04/13 13:36:13,307 airportd[64]: _doAutoJoin: Already associated to “telenet-6FF6B”. Bailing on auto-join.
15/04/13 13:36:13,328 loginwindow[42]: Login Window Started Security Agent
15/04/13 13:36:13,366 locationd[125]: NOTICE,Location icon should now be in state 0
15/04/13 13:36:13,378 UserEventAgent[118]: cannot find useragent 1102
15/04/13 13:36:13,390 SecurityAgent[124]: This is the first run
15/04/13 13:36:13,391 SecurityAgent[124]: MacBuddy was run = 0
15/04/13 13:36:13,430 SecurityAgent[124]: User info context values set for Richard
15/04/13 13:36:13,690 loginwindow[42]: Login Window - Returned from Security Agent
15/04/13 13:36:13,694 loginwindow[42]: ERROR | ScreensharingLoginNotification | Failed sending message to screen sharing GetScreensharingPort, err: 1102
15/04/13 13:36:13,716 loginwindow[42]: USER_PROCESS: 42 console
15/04/13 13:36:13,735 airportd[64]: _doAutoJoin: Already associated to “telenet-6FF6B”. Bailing on auto-join.
15/04/13 13:36:14,093 com.apple.launchd.peruser.501[127]: (com.apple.gamed) Ignored this key: UserName
15/04/13 13:36:14,093 com.apple.launchd.peruser.501[127]: (com.apple.gamed) Ignored this key: GroupName
15/04/13 13:36:14,094 com.apple.launchd.peruser.501[127]: (com.apple.ReportCrash) Falling back to default Mach exception handler. Could not find: com.apple.ReportCrash.Self
15/04/13 13:36:14,098 loginwindow[42]: Connection with distnoted server was invalidated
15/04/13 13:36:14,104 distnoted[131]: # distnote server agent absolute time: 40.492051343   civil time: Mon Apr 15 13:36:14 2013   pid: 131 uid: 501 root: no
15/04/13 13:36:14,482 blued[55]: kBTXPCUpdateUserPreferences gConsoleUserUID = 501
15/04/13 13:36:14,553 awacsd[56]: Exiting
15/04/13 13:36:15,123 WindowServer[88]: **DMPROXY** (2) Found `/System/Library/CoreServices/DMProxy'.
15/04/13 13:36:15,178 WindowServer[88]: Display 0x43300b08: MappedDisplay Unit 0; ColorProfile { 2, "HD 709-A"}; TransferFormula (1.000000, 1.000000, 1.000000)
15/04/13 13:36:15,185 com.apple.SecurityServer[15]: Session 100005 created
15/04/13 13:36:15,208 mds[38]: (Warning) Server: No stores registered for metascope "kMDQueryScopeComputer"
15/04/13 13:36:15,209 mds[38]: (Warning) Server: No stores registered for metascope "kMDQueryScopeComputer"
15/04/13 13:36:15,502 NetworkBrowserAgent[162]: Starting NetworkBrowserAgent
15/04/13 13:36:16,453 WindowServer[88]: kCGErrorNotImplemented: receive_notification: CPXSetEventFilter failed
15/04/13 13:36:16,990 WindowServer[88]: kCGErrorNotImplemented: receive_notification: CPXSetEventFilter failed
15/04/13 13:36:19,014 NotificationCenter[170]: Unable to simultaneously satisfy constraints:
    "<NSLayoutConstraint:0x7fcae2812fd0 H:|-(100)-[NSView:0x7fcae2812670](LTR)   (Names: widgetView:0x7fcae2812900, '|':widgetView:0x7fcae2812900 )>",
    "<NSLayoutConstraint:0x7fcae28130f0 H:[NSView:0x7fcae2812670]-(0)-|(LTR)   (Names: widgetView:0x7fcae2812900, '|':widgetView:0x7fcae2812900 )>",
    "<NSLayoutConstraint:0x7fcae2812c30 H:[NSView:0x7fcae4515bb0]-(0)-|   (Names: '|':NSView:0x7fcae2812670 )>",
    "<NSLayoutConstraint:0x7fcae2812bd0 H:|-(0)-[NSView:0x7fcae4515bb0]   (Names: '|':NSView:0x7fcae2812670 )>",
    "<NSAutoresizingMaskLayoutConstraint:0x7fcae451b640 h=--& v=-&- H:[widgetView(385)]   (Names: widgetView:0x7fcae2812900 )>",
    "<NSLayoutConstraint:0x7fcae4515c50 H:[NCSwitchButton:0x7fcae450f6a0]-(>=9)-|   (Names: '|':NSView:0x7fcae4515bb0 )>",
    "<NSLayoutConstraint:0x7fcae45164f0 H:|-(35)-[NSTextField:0x7fcae45120d0]   (Names: '|':NSView:0x7fcae4515bb0 )>",
    "<NSLayoutConstraint:0x7fcae4511c20 H:[NCSwitchButton:0x7fcae450f6a0(64)]>",
    "<NSLayoutConstraint:0x7fcae4512890 H:[NSTextField:0x7fcae45120d0]-(NSSpace(8))-[NCSwitchButton:0x7fcae450f6a0]>",
    "<NSLayoutConstraint:0x7fcae45123b0 H:[NSTextField:0x7fcae45120d0(184)]>"
Will attempt to recover by breaking constraint
<NSLayoutConstraint:0x7fcae45123b0 H:[NSTextField:0x7fcae45120d0(184)]>
Set the NSUserDefault NSConstraintBasedLayoutVisualizeMutuallyExclusiveConstraints to YES to have -[NSWindow visualizeConstraints:] automatically called when this happens. And/or, break on objc_exception_throw to catch this in the debugger.
15/04/13 13:36:19,156 WindowServer[88]: kCGErrorNotImplemented: receive_notification: CPXSetEventFilter failed
15/04/13 13:36:21,063 Image Capture Extension[169]: [2] Failed to register for death of process with pid: 166
15/04/13 13:36:21,067 WindowServer[88]: kCGErrorNotImplemented: receive_notification: CPXSetEventFilter failed
15/04/13 13:36:21,507 apsd[58]: Unable to bootstrap_lookup connection port for 'com.apple.ubd.system-push': Unknown service name
15/04/13 13:36:21,788 WindowServer[88]: CGXDisableUpdate: UI updates were forcibly disabled by application "Calendar" for over 1.00 seconds. Server has re-enabled them.
15/04/13 13:36:22,655 librariand[180]: MMe quota status changed: under quota
15/04/13 13:36:24,388 WindowServer[88]: reenable_update_for_connection: UI updates were finally reenabled by application "Calendar" after 3.60 seconds (server forcibly re-enabled them after 1.00 seconds)
15/04/13 13:36:24,389 Calendar[149]: Lock Contention on CalendarStore Initialization
15/04/13 13:36:24,394 coreservicesd[61]: Can't change an application into stopped state for app App:"Calendrier" [ 0x0/0x9009] @ 0x0x7ff51b0096b0 because it's already been started.
15/04/13 13:36:24,703 Mail[147]: Using V2 Layout
15/04/13 13:36:26,225 com.apple.SecurityServer[15]: Session 100008 created
15/04/13 13:36:31,796 Dock[153]: find_shared_window: WID -1
15/04/13 13:36:31,796 WindowServer[88]: CGXGetWindowProperty: Invalid window 0xffffffff
15/04/13 13:36:31,796 Dock[153]: CGSCopyWindowProperty
15/04/13 13:36:31,796 WindowServer[88]: CGXGetScreenRectForWindow: Invalid window -1
15/04/13 13:36:31,796 Dock[153]: CGSGetScreenRectForWindow
15/04/13 13:36:32,568 WindowServer[88]: CGXDisableUpdate: UI updates were forcibly disabled by application "Safari" for over 1.00 seconds. Server has re-enabled them.
15/04/13 13:36:32,654 coreservicesd[61]: Can't change an application into stopped state for app App:"Console" [ 0x0/0x6006] @ 0x0x7ff519603da0 because it's already been started.
15/04/13 13:36:34,080 com.apple.launchd[1]: (com.apple.coreservices.appleid.authentication[122]) Exit timeout elapsed (20 seconds). Killing
15/04/13 13:36:37,558 WindowServer[88]: reenable_update_for_connection: UI updates were finally reenabled by application "Safari" after 5.99 seconds (server forcibly re-enabled them after 1.00 seconds)
15/04/13 13:36:37,672 com.apple.launchd.peruser.501[127]: (com.apple.afpstat-qfa[205]) Job failed to exec(3). Setting up event to tell us when to try again: 2: No such file or directory
15/04/13 13:36:37,672 com.apple.launchd.peruser.501[127]: (com.apple.afpstat-qfa[205]) Job failed to exec(3) for weird reason: 2
15/04/13 13:36:38,590 com.apple.launchd.peruser.501[127]: (com.apple.mrt.uiagent[198]) Exited with code: 255
15/04/13 13:36:41,000 kernel[0]: MacAuthEvent en1   Auth result for: 5c:35:3b:56:ff:70 MAC AUTH succeeded
15/04/13 13:36:41,000 kernel[0]: wlEvent: en1 en1 Link UP virtIf = 0
15/04/13 13:36:41,000 kernel[0]: AirPort: RSN handshake complete on en1
15/04/13 13:36:41,000 kernel[0]: wl0: Roamed or switched channel, reason #1, bssid 5c:35:3b:56:ff:70
15/04/13 13:36:41,000 kernel[0]: en1: BSSID changed to 5c:35:3b:56:ff:70
15/04/13 13:36:41,000 kernel[0]: en1::IO80211Interface::postMessage bssid changed
15/04/13 13:36:41,099 Mail[147]: Couldn't contact spell checker for Multilingual
15/04/13 13:36:59,458 mdworker[209]: Unable to talk to lsboxd
15/04/13 13:36:59,000 kernel[0]: Sandbox: sandboxd(215) deny mach-lookup com.apple.coresymbolicationd
15/04/13 13:37:01,870 sandboxd[215]: ([209]) mdworker(209) deny mach-lookup com.apple.ls.boxd

IPod Touch turns off when shaken during sleep mode & other problems

I noticed a problem with my iPod Touch around a month after I bought and I thought it was normal for the iPod Touch to act that way but it seemed rather getting into my nerves. I will try to describe the situation the best way I possibly could so please bear with me.
First, I have a problem with my iPod when it's at sleep mode. When I press the home button too look at the time/date for example and then I shake it or move it before it blacks out and goes back to sleep mode again, it hangs up and I have to press the power & home button to turn it off. It happened all the time and it gets really annoying because when friends borrow it, it dies.
The same thing happens when I play a song and then I don't put it to sleep mode. When I shake it, it hangs up.
Second, when I use my iPod at night before sleeping to listen to music and the like, the moment I wake up, the battery is totally drained. I am DEFINITELY sure that no song was playing at that time and it was even fully charged. Last night I decided to monitor my iPod on a regular basis to see at what point in time the battery starts to diminish. I fell asleep but when I woke up at around 10 to check my iPod, the screen is black and yet it's on because the screen is glowing. I restarted it and when it went on again, the applications are all disarranged.
Third, there are duplicate songs in my iPod although when I check in my iTunes to delete the songs, it only appears as a single song but it is in duplicate in my iPod.
What do I do? Thanks!

iOS: Restore errors 4005, 4013, and 4014
It may be a hardware problem.
If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar

White light stays on during sleep mode.

Similar Messages

Maybe you are looking for