White line down middle of document

Need help. I have a white line down the middle of all documents, whether from computer or scanner on our MF2727nf. We have replaced cartridge and still have the problem.
Any help will be appreciated.
Thanks,
Rochel

Removing and re-installing iTunes won't do any good as it does not pertain to the iPod in any way. If none of the 5 R's of troubleshooting helped, we can definitely say that it is a hardware issue with the iPod's LCD display.
http://www.apple.com/support/ipod/five_rs/
Sometimes it helps to let the battery fully drain and then redoing the 5 R's.
B-rock

Similar Messages

White Line Down Middle of iPod Classic Screen

I have recently noticed a thin white vertical line on the right side of my iPod classic screen. It doesn't affect the iPod's function at the moment but I'm worried that it is signaling a potential technicial problem. I have tried all the initial troubleshooting steps suggested but am leery about uninstalling and reinstalling iTunes.

Removing and re-installing iTunes won't do any good as it does not pertain to the iPod in any way. If none of the 5 R's of troubleshooting helped, we can definitely say that it is a hardware issue with the iPod's LCD display.
http://www.apple.com/support/ipod/five_rs/
Sometimes it helps to let the battery fully drain and then redoing the 5 R's.
B-rock

White line down screen

I have a satellite P105-S6124. A one inch vertical white line is on screen. What causes this and can it be repaired? Its always there and never goes away.

Probably a defect in the screen. You can verify that by using an external monitor and seeing if it gets a white line down the screen too. If it doesn't, you've got a bad screen or possibly the video cable. Screens are expensive. Hopefully the computer is still under warranty.

HT1430 I have 4 white lines down right hand side of phone I cannot use any icons under the lines

My I phone 5 has 4 white lines down right hand side I cannot use the icons under it. Can anyone help?

Basic troubleshooting from the User's Guide is reset, restart, restore (first from backup then as new). Try each of these in order until the issue is resolved.
As long as the issue is not the result of user damage (like being dropped) it should be covered under warranty. Only Apple can say for certain whether it is covered or not.

Trying to export M2V, getting an annoying white line down side...

Hey guys, looking been looking for solutions to this but to no avail...
Trying to compress a prores 1920x1080 422 hq clip into an m2v for burning. Problem is whenever I touch the frame controls, I seem to get a freaking annoying white line down the right hand side of my vid.
If I turn the frame controls off, it works, but I want them on because the image quality is far superior with it one.
Here's the settings I had:
Another really annoying thing is that I did an experiment, I opened the prores in QT player, exported for web/computer/h264 and brought that into compressor, rendered it out. No white line. But H264 looks like utter crud.
Any ideas?? This is so infuriating. Thanks so much

A line (usually a green line) down the right side of a video usually means a size mismatch that the codec can't deal with. What is the final size the video shows, m2v?
Set Details Level to zero and turn off Active Details. Details Level and Anti-alias are used when up-sizing a video.
You may need to do the re-sizing before going to m2v. Resize using ProRes (4444 is an over kill) and use that to make your m2v. And use better as Russ has pointed out. The best setting will yield about 10% in quality over better. You will not see that 10% gain in quality in the final video. Especially since your going to m2v for the final video. When you use frame control to convert a video to m2v. Frame control has be read during each (2) pass adding to the time to the encoding. Personaly, if I need to use frame control to make a DVD (or h.264), I make a intermediate video... PreRes, and use that to make my DVD or h.264 video.
Lastly, if this doesn't fix the white line you may need to crop off 1 or 2 pixel lines (right or left) from the video. You won't see this in the final video.
I have had to do this.
Food for thought... If your making DVDs from 1080 video footage or having to resize the video regularly for DVDs or h.264 encoding. You can use the 'NEW JOB WITH TARGET OUT PUT' option in *Compressor. This will make a ProRes intermediate video with the size changes (you need set the new size). After that has be encoded it will automatically convert that ProRes video to m2v.
You can either do this at night (sleep time) or do something else while this is being executed.
Old video showing how to use this option. It will also tell you why you wouldn't want to use frame control when making an h.264 (m2v) video:
http://pixelcorps.cachefly.net/macbreak-154-540p-h264.mov
*If your using Compressor 3.5... the second encoding (MPEG-2 in the above example) you will need to set the size in the geometry widow. Compressor 3.5 leaves this blank (a bug), this was fixed in Compressor 4.

Vertical black lines down middle of page

Hi folks,
I have an LaserJet 4250n that's putting vertical light black smudges/lines down the center of my pages. It's all the way down, but it gets lighter at certain points and picks back up again. I've tried replacing the toner cartridge and cleaning the rollers, to no avail.
Any ideas?
Thanks!
James
This question was solved.
View Solution.

Hi James,
I am a printer technician for HP in Australia and a full time employee. I look after many printers including this one.
Lines down the page can be caused by a few things - depending on what the line looks like.
If it is a smudged dirty streaky mark continously down the page, you migh have a dirty fuser - it may have been picking up toner and it has built up and then put it back down on the paper.
A thin defined black line might be a scratched drum or developer - the laser might be refracting and drawing the defect onto the drum.
Blank or white lines could be something stopping the toner from getting to the paper - transfer roller under the toner might have something stuck on it.
A repeated mark or defect could also be a dirty fuser - glue or wax from envelopes and labels could do this.
Try swapping the toner with another to test - borrow one if you can.
Run 3 or 4 cleaning pages - in the menu, configure device, print quality menu, create/process cleaning page.
Remove the fuser - back door comes off, little blue clips, pull it. out - rotate using the green knob and you might be able to gently remove something stuck in it.
If you can get to another 4250 or 4350 you could borrow the fuser and find out.
For this machine, I find worn out fusers and dirty printers are most commonly showing these symptoms. Next common is low quality after market cartridges.
Hope I can help you here
Steve Hewitt
HP Australia
Melbourne.
Although I am an HP employee, I am speaking for myself and not for HP.

Black line down middle of copies

We have a HP 6480 all in one that prints fine but when we make copies it prints a black line down th middle of the copy? I have cleaned the glass and rollers outside and in. what else can I do??

Hi ChrisCanon,
The lines on copies that you are experiencing is a result of the scan glass being dirty or scratched. The scan glass that the printer uses when scanning from the ADF is located to the left of the larger glass area (platen) when you open the cover. It is the smaller glass strip on the left hand side of the unit.
Spray some glass cleaner on a paper towel and then clean the smaller glass area. Once cleaned, try scanning from the ADF again.
If you continue to have difficulties, please contact our support group using the following link:
http://www.usa.canon.com/cusa/consumer/standard_display/contact_us_consumer
Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

Photos have a line down middle.

Hi, I have a canon rebel t3i and my pictures are coming out with a line down the middle. One side is lighter than the other. I thought it was just the screen, but when I print my pictures the line appears with half of the photo being darker/lighter. Do I need a new lens?Please help.

Are you using flash? If so, is it the one on the camera, or is it a Speedlite in the hot shoe?
If the flash is not sync-ing correctly with the shutter, you may get that, as the shutter is really just a rectangular opening that travels horizontally in front of the sensor. If the opening passes part of the picture before the flash fires then half the picture will not get light from the flash.
I once had that happen when my Speedlite flash had slid loose in the shoe so it was not talking well with the camera.
Scott
Canon 6D, Canon T3i, EF 70-200mm L f/2.8 IS mk2; EF 24-105 f/4 L; EF-S 17-55mm f/2.8 IS; EF 85mm f/1.8; Sigma 35mm f/1.4 "Art"; EF 1.4x extender mk. 3; 3x Phottix Mitros+ speedlites
Why do so many people say "fer-tographer"? Do they take "fertographs"?

Two white lines down Iphone 5 screen

I dropped my Iphone 6 months ago and cracked the top of the screen. I didn't get it repaired as phone was working as normal until two days ago whn I noticed two white vertical lines down my screen and the phone started playing up (going onto stuff I have not pressed). Is there any reason for this or any solutions?

If it's under warranty and hasn't been physically damaged, jailbroken, illegally unlocked, etc. They will replace it with an identical phone.

White line in middle of screen on macbook air

When I am on a screen sometimes my macbook air shows a white line. on the right it is brighter and on the left it is dimmer. I have seen it on the startup screen, and on youtube videos.

This from the Adobe bug tracking system:
http://bugs.adobe.com/jira/browse/FP-4527
Qingyan zhu added a comment - 05/17/10 12:53 AM
Thanks for your report for flash player. Seems this is feature of ATI. refer to http://www.neoseeker.com/Articles/Hardware/Features/ati_9.11/2.html
Please disable Avivo demo mode and test it again.
Worth commenting on the defect...

Booklet Gutter Issue - When I print a booklet at 11x17, it causes a large white line down the center. But, when I try the same thing at 8.5x11 it prints side by side as it should. Help?

I have a 36 page booklet (each page is 8x5.5in). I have exported the booklet from InDesign as Pages. In Acrobat, when I select Print Booklet and 11x17 paper, it created a large white gutter down the center and the pages do not back up to each other.
I tried the same thing with 8.5x11 paper and they pages backed up to each other correctly with no white space down the center.
I tried again at 11x17 (size needed to print my booklet full size), and it's still causing the large white gutter. It's nearly half an inch or larger.
Help is VERY appreciated!

" Hello Jeff. Here at Oki Data, we do not support programming. I would recommend contacting Adobe for further assistance. You can also browse their website at http://www.adobe.com/products/postscript/.

Black line down middle of copies from Auto Document Feeder. Canon mx922.

When printing copies through te Auto Document Feeder (the feeder on top) of my Canon mx922, a black line appears down the middle of the page. How do I clean the ADF/ fix this problem? Thank you.

Hi ChrisCanon,
The lines on copies that you are experiencing is a result of the scan glass being dirty or scratched. The scan glass that the printer uses when scanning from the ADF is located to the left of the larger glass area (platen) when you open the cover. It is the smaller glass strip on the left hand side of the unit.
Spray some glass cleaner on a paper towel and then clean the smaller glass area. Once cleaned, try scanning from the ADF again.
If you continue to have difficulties, please contact our support group using the following link:
http://www.usa.canon.com/cusa/consumer/standard_display/contact_us_consumer
Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

HT201263 hi i have an iphone 4 im fed up with it it keeps freezing and blue screen i have restarted it every other day for 2 wks now even had it in a phone shop now the screen is blue with a white line down the middle and will not let me switch off after

my iphone 4 has been acting up for 2 wks now every other day it keeps freezing sometimes i can wake it by pressing the 2 buttons tog ive restored it restarted it had it in a shop were they got it back on, saying it was the soft ware, but the same day i got it back it froze again, now the screen is blue once again and it wont let me switch it off n sort it with pressing both buttons and the computer isnt finding it, im fed up i will never have another iphone any ideas anyone please

Hi @imobl,
You sound like an Apple support guy who hasn't been able to answer my questions.
To respond to some of the points you made,
- I did not ignore Ocean20's suggestion. If you has read my post, you would have known that I took my phone to the apple service centre where they tried this restore on THEIR machines. I am assuming that Apple guys know how not to block iTunes. So I actually do not understand your point about me trying the hosts file changes on my machine. Do you not believe that apple tested this issue with the correct settings?
- you also give a flawed logic of why the issue is a hardware issue. You mentioned that If I thought that the issue was with the software, i should try a restore and getting it to work. The problem is that my error (23), and many others comes up when the restore fails. And you would be astonished to know that not all errors are hardware errors. Sometimes even software errors prevent restores. Funnily enough Apple itself mention that 'in rare cases, error 23 could be hardware related'.
- all Apple has done so far is replicate the issue. I don not know how anyone can conclude that the issue is a hardware issue.
And by the way, I am not certain that this is a software bug. Again if you read my Posts, you will notice I only want a confirmation,/proof that the issue is hardware related as they mention..
Please refrain do. Responding if there is nothing to add.

White Line down screen HELP?!

Ok out of the blue a white pix elated line that dims and brightens running vertically right down the middle of my screen appeared last night and after many restarts has not gone away. Now, the line spans across the screen so its not just in a browser or anything like that in fact i can type behind it and move windows around it to see whats under this line. At times it is completely solid white other times it fades in and out almost disaprearing. Someone please tell me my whole screen is not going soon

Hi starsky
have a look at this thread, long though it may be. it should answer your questions, and yes I've been through this too and it has worked out.
M.
http://discussions.apple.com/message.jspa?messageID=8427569#8427569

Purple Line Down Middle Of Screen After Update

I just bought a brand new ipad mini.
Everything was fine, then i get a message asking if I want to update to the newest ios version.
I say ok and it downloads and does the update.
Then I notice there's a purple line going down the middle of the screen?
Is this a software issue or a hardware issue?
Is this related to the update?
Should I take it to an apple store and try and get a replacement or is it a simple fix?

Try this - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.) No data/files will be erased. http://support.apple.com/kb/ht1430
 Cheers, Tom

White line down middle of document

Similar Messages

Maybe you are looking for