White Lines appear on Images in Adobe Photoshop CS3

White Lines appear on Images in Adobe Photoshop CS3
Recently discover that on three different computers, while editing images in Adobe Photoshop CS3, white lines would appear on some of the images.
For example changing a image from a .jpg to a .psd or size, or enchantment features, the white lines would appear on the image.
The lines did not appear on any of the printed images, any suggestions.
Monitor: Sony Trintron Multiscan G4110
Computer: Mac G5

>The lines did not appear on any of the printed images,
Although it is odd that three computers exhibit the same problem, and unless you can provide other coincidences (same files, same monitor, etc.), I agree. The video card is typically the culprit IF the image anomalies don't print and if they move about with each image resizing or opening of a specific image. Check to see if it's properly seated and connected. Same for monitor cable. Try swapping in another card.
One other thought: as this is a CRT monitor, what happens if you change the resolution and refresh rate? Are you using a recommended combination for that monitor?
Neil

Similar Messages

When a pdf is taken from illustrator, white lines appears on images. How can be avoided it?

When a pdf is taken from illustrator, white lines appears on images. How can be avoided it?
I use illustrator cs5. It occures mostly on the cover pages of brochures which contains images, texts and some effects such as drop shadow etc.

Thanks for your reply.
When smooth line art is turned off in Acrobat preferences,the lines disappears but the text becomes raserized and goes its smoothness. Not only that, we are not sure that everyone who is viewing the pdf has the same settings in their laptop or desktop.
Is there any other solution to remove these lines? I have added the screenshot of a part of the pdf.
Thanks once again for your support.

Why are white lines appearing in images in PDF files but not the original InDesign files?

Hi folks!
Let me just start out by saying that I'm not a graphic designer and have basically no experience with graphic design programs, aside from the little futzing around I've tried to do with InDesign. My company (which publishes a monthly magazine) has decided that it would be a great idea to get the files to our magazine from the graphic design firm that actually handles the production end of things so that we may offer back articles, etc., and modify them as needed. Somehow I've gotten assigned the task of handling this. However, I've encountered some problems along the way. The graphic design firm uses Quark, we own InDesign (CS3) and use Markzware to convert the files. Most things seem to work okay in this arrangement but I'm having problems with the images in the file when I create PDFs. Although the images look fine in the InDesign files (and are of print quality), when I create PDFs of some files, thin white lines appear over the images in the PDF document. I asked our graphic designer about this but she has no idea, and she isn't very familiar with InDesign.
So, my question is, where are these lines coming from and how do I stop them from appearing? As a reminder, I'm not a graphic designer and am fdairly ignorant in design software terminology. If you're kind enough to try to help me with this problem, I'm going to require an explanation in plain English. Basically explain it to me like you would to a 10 year old.
If anyone can help, I'd greatly appreciate it!
Thanks in advance,
Lynn

I think Bob was typing too fast and meant to ask if you were distilling, not to tell you distill.
Distilled PDF (you get distilled by printing to PDF rather than exporting) always flattens transparency, which is what makes those white "stitching" lines.
You can make the stitching disappear on screen by turning off smoothing in the Acrobat prefs, and it shouldn't print on a press, but it sounds like you may be doing the output on a digital machine and it's likely to show on the lower resolution output.

Need help in quantizing an image(using adobe photoshop CS3)

Hi All,
I am using window and adobe photoshop CS3 extended. I had an image whereby i had already perform histogram equalization. I would like to quantize the image obtained into 2 bits per pixel, per channel. Can anyone advise me? The image is a 24 bit colour BMP file whereby the bit depth is 24 bits. Pls advise.

Hi, I managed to find the refresh cached option. However there is still one thing which i need some clarification on.
The problem for me is to quantize the image into 2 bits per pixel per channel. I understand from the previous post that i need to use posterize and set it to 4. My questions are as follow.
1) why must the value be 4? if the value is 4 then there should be 8 bits, but my question require a total of 6 bits only
2) After saving my quantized image, the properties of the image still show me the bit depth being 24, thus is there any where whereby i can check that each color pixel is exactly represented by 2 pixels?
Hope you can advise. Tks

Start a newline in a textblock - Adobe Photoshop CS3

How do you start a new line in a textblock in Adobe Photoshop CS3? When I press enter, it simply accepts the text changes I've made. I have found that I can create a new line by copying it out of another program (i.e. - Notepad) and pasting it into the text block in Photoshop, but this is quite a pain. Is there a way to make the enter key create a newline? I've tried Shift+Enter, and every combination of Ctrl/Shift/Alt+Enter I can think of and nothing will create a newline. Is there something I'm missing?

If you have this problem, i guess a good way to geta round it is to tunr off Hyphenate option in the paragraph panel, and instead of just clicking anywhere on screen to start typing, click and drag out a text box roughly the right size. When then typing gets to the end it will automatically goto a new line like in any word processing application. This will work for most things, but other than that if you want something a bit more specific, you'd have to move each word around indervidually.

Problem with tiny white lines appearing in my work

Hi all,
I'm very new to photoshop. I find that while I'm working this white noise (and also other times in the form of a bunch of tiny white lines) appears to cover most of my image. See to the right of the man's head as well as from his neck down on the orange background. It's manageable (though annoying and distracting) while working, but I got to thinking what if the finished file displays the lines as well? To test this, I saved it in a few file formats and I still see the lines. Also, this project, including the starting file, is from the adobe tutorial classroom in a book, if that helps. I'm hoping someone can help me! Thanks!

Thanks for your help.
8 GB 1600 MHz DDR3
OS X 10.9.5
174.08GB free of 250.14GB
I haven't set any scratch discs. Should I set them up at this point?
The book is showing the same exact image without the lines.
The attached screen shots show each layer on its own - some show the white lines, some do not. None of the channels show the white lines. They appear often when working with masks.

White lines appear on videos since my new Mac Pro - Why?

Hello,
I'm the happy owner of a Mac Pro 2,7 GHz 12-Core Intel Xeon E5 / 64 gig RAM / 2X AMD FirePro D700 6144 Mo running on OS X 10.9.3 (13D65).
I'm using CC latest version but also Red Giant Magic Bullet LOOKS to color grade my videos (on an adjustment layer). I have 3 HDD (1 SSD in the computer with the programs + 1 external (Thunderbold) G-RAID for cache files + 1 external Pegasus R6 2 (Thunderbolt 2) for the footage).
Sometimes, when reading (but more often when exporting in Media Encoder) white lines appear on the video (see image below). Why?
Is that a Premiere problem? Is something going wrong with my Mac? I have already reinstalled everything from scratch but the problem remains...
I was working with the same programs on my previous iMac and I didn't have this problem.
Any idea ?

Nicolas.Olivier wrote:
Is it an Adobe or a Mac Pro 2013 related problem? Does everyone using the GPU acceleration have the same problem?
So far, it appears to be an issue with OS X 10.9.2 and up. Some folks that are beta testing 10.9.4 have reported that the strange artifacts no longer appear while using Hardware mode, but a few folks are still having Premiere crashes with it. My suspicion is that we're seeing two separate problems with Premiere on the new Mac Pro when using Hardware mode: 1) artifacts, lines, etc on exports and 2) application crashes. Neither of these appear to happen when Pr and AME are put into Software mode. Given the commonality of the problems (using GPUs on the new Mac Pro) some folks seem to think they're directly related. My gut tells me they aren't.
The challenge for the folks at Adobe and other third party app developers is that the boys (and girls) in Cupertino are changing things within OS X a bit too quickly, for better, for worse. Some of these changes are what I call "ninja patches" where they don't really explain what they're changing or why. I strongly suspect that's what's going on here. They sneaked something into OS X 10.9.2 and haven't un-sneaked it yet. Folks are strongly encouraging Adobe to address this issue pronto, but if Cupertino keeps altering the guts of the OS, how can they?

White lines appears at bottom of screen just during slide show on Keynote.

Hi, i hope some can help me with this problem.
2 White line appears at bottom of screen during slide show on Key note 2.0.2,m i have no problems on the preview, photoshop or other program that use photos.
Another thing, the same 2 lines appears in the window of the person i'm chating on messenger.
it's very strange....
gabe

It looks like an unstyled background in your frameset. You'd
be better
off ftp'ing to your .co.uk domain rather then importing the
page from
ntl world.
Cheers jojo
Adobe Community Expert for Dreamweaver 8
http://www.webade.co.uk
http://www.ukcsstraining.co.uk/
Extending Knowledge, Daily.
http://www.communityMX.com/
Free 10 day trial
http://www.communitymx.com/joincmx.cfm

White lines appear on OAM placed in InDesign

Hello. This is my first post in the forums.
I've just placed my first OAM file into an InDesign folio. The initial/downstage image views great in both Edge Animate and InDesign but once the folio is uploaded and viewed on a tablet device horizontal white lines appear. Has anyone experienced this behavior with OAM files and tablets? I've seen postings about white lines appearing in PDFs but not folios. Any ideas how to fix this issue?
Thanks!
_melissa

>The lines did not appear on any of the printed images,
Although it is odd that three computers exhibit the same problem, and unless you can provide other coincidences (same files, same monitor, etc.), I agree. The video card is typically the culprit IF the image anomalies don't print and if they move about with each image resizing or opening of a specific image. Check to see if it's properly seated and connected. Same for monitor cable. Try swapping in another card.
One other thought: as this is a CRT monitor, what happens if you change the resolution and refresh rate? Are you using a recommended combination for that monitor?
Neil

White line appearing at top of screen on SD and some HD

I've noticed a white line appearing atop my broadcast watching SD and some HD channels.
I know this line is part of the broadcast signal which is responsible for closed captioning or some other technical aspects. From what I've researched, a TV's overscan should crop out that part of the broadcast, unfortunately mine is not.
Here's my set up:
Vizio VL320M 32" 1080P HDTV (receiving signal via HDMI from receiver)
Sony STR-DH700 Receiver (receivers HDMI switch outputting signal to Vizio TV)
Motorola QIP6416-2 DVR STB (connected via HDMI to receiver HDMI switch)
I can crop out the white line by setting my Vizio to Zoom1 or Stretch, though this distorts the image and is a pain to reset for channels which do not experience this problem.
I can also adjust the TV's vertical posistion up a few to get rid of the line, BUT when I switch HDMI ports to goto my xbox 360, then switch back to the HDMI port my cable is on, it appears that the STB resets my signal position and the line comes back.
I haven't tried component, and really do not want to switch from HDMI to component as some sort of work around.
If anyone has any suggestion to resolve this problem, please post. Thanks for any suggestions.

I think I may have narrowed down the problem. I believe it's a handshake issue occurring between my Sony receiver and my TV, though I could be wrong. Maybe some of you A/V experts can see otherwise.
I've come to this conclusion because of the vertical setting being returned to its default position upon switching ports on my Sony's HDMI switch. Keep in mind my STB is connected to a port on my Receiver's HDMI switch and my receivers HDMI output is connected to my TV.
I can crop out the white broadcast line by simply adjusting the vertical position of my screen up of few pixels. HOWEVER, when I switch HDMI ports on my receiver, then come back to the port my STB is on, the vertical position resets itself to the default position, even though my TV's vertical setting never changed.
Here's another possible confirmation. If I press the menu button on my Vizio's remote, immediately upon the TV's menu appearing the vertical position goes to the position that's set in the TV. Strange, but that's what leads me to believe there's a conflict occurring somewhere between my receiver and TV.
I have confirmed this behavior does not occur when I connect my STB directly to my TV. I can switch my TV's HDMI ports and the vertical position holds.
I contacted Sony support, and they want me to take my receiver to a service center. I doubt that there's a problem with my receiver that can be fixed, so I'm just gonna use a workaround by activating my TV's menu so the handshake can complete after switching HDMI ports.
Since I have a universal remote that's capable of macro layering, it's just a matter of programming a layered macro to goto my STB port then activate the TV menu to initiate the vertical setting. Maybe at some other point in time I'll lug my receiver in, though unless I'm positive it can be fixed, I really don't feel like pulling apart my home theatre and explaining this to techs if I'm not even sure it can be fixed.
If anyone else knows of a better workaround please feel free to post it. Thanks.

CS6 white line appearing to left of graphic

Hello,
I have two issues with this website.
1) To the left of the header graphic a white line appears, I can't account for it. I've tried several things to compensate for it. Nothing works.
2) At the top left there is an undocked portion of the background, I can't account for this either. Again, I have reviewed line by line and I have tried several fixes. Nothing even touches it. (In the event this information is useful, when in the developer side, I click on that line and get a flashing text type cursor. )
I have researched youtube and various forums also, looking for a fix or answer. I am thinking this might be a bug. Anyone have an answer? a fix?
I threw some pages up (still building the pages) so you can see what I am writing about.
http://www.spokaneteapartypatriots.com/Video%20Page.html
deegoodwin
^

deegoodwin wrote:
Hello,
I have two issues with this website.
1) To the left of the header graphic a white line appears, I can't account for it. I've tried several things to compensate for it. Nothing works.
Its part of your image - you have a thin white line running all the way around it:
http://www.spokaneteapartypatriots.com/images/logo7c.png
deegoodwin wrote:
2) At the top left there is an undocked portion of the background, I can't account for this either. Again, I have reviewed line by line and I have tried several fixes. Nothing even touches it. (In the event this information is useful, when in the developer side, I click on that line and get a flashing text type cursor. )
That's also due to the thin white line running all the way around that image:
http://www.spokaneteapartypatriots.com/images/gradient7b.png

Adobe PhotoShop CS3 - Image Enhancements

Hello.
I have an extensive website with images...
http://www.marsesa.9f.com/slide_show.html
I use PS CS3 to enhance images. Enhancements revealing details not visible to the naked eye.
My latest images. A Mars dust devil.
http://www.marsesa.9f.com/slide_shows/Sol_537_Dust_Devil/PIA04154_A.jpg
Enhanced......
http://www.marsesa.9f.com/slide_shows/Sol_537_Dust_Devil/PIA04154_B2.jpg
http://www.marsesa.9f.com/slide_shows/Sol_537_Dust_Devil/PIA04154_B2A1.jpg
http://www.marsesa.9f.com/slide_shows/Sol_537_Dust_Devil/PIA04154_B2A10A.jpg
http://www.marsesa.9f.com/slide_shows/Sol_537_Dust_Devil/PIA04154_B2A11A.jpg
http://www.marsesa.9f.com/slide_shows/Sol_537_Dust_Devil/PIA04154B2A16C.jpg
I am trying to duplicate these images. No success.
I did not take notes or saved my history.......I really would like to re-create these images.....Re-create the steps needed duplicate this image. I
only need to duplicate or reveal the details - not the colors (false colors are from a gradient filter - a grayscale maping tool).
http://marsesa.9f.com/slide_shows/Sol_537_Dust_Devil/PIA04154_B2A10A.jpg
My challenge to anyone out there.....Re-create or duplicate my images.......In this way, someone else can confirm my images.
Base image.......I have used the TIFF image as my source.
http://photojournal.jpl.nasa.gov/catalog/?IDNumber=PIA04154
I am claiming that these so-called Martian dust devils are not natural events. Technology or intelligence is involved.
I have more dust devil images - Slide show "Spirit Rover Dust Devils"
Ken

Hello Mike.
Typical forum response.....One of the reasons I was reluctant to post a topic.
I am trying to stay away from forums....They are whacky....Like a noisy bar or pub......(smiling)...
I have been emailing universities.....Phd types, researchers and scientists.......
My target audience is people from this group....Eventually. They are impossible to reach. I figure posting a forum topic will attract
someone with a strong knowledge base of Adobe Photoshop CS3 or CS4 (algorithms).
http://www.adobe.com/technology/people/seattle/salesin.html
Enlarging, Surface Blur, Noise reduction, Exposure (gamma adjust), Shadows and Highlights, Gaussian Blur (radius 0.3 pixel), Sharpening,
Curves - both customized and presets (contrast adjustments), Color balance, Hue and Saturation, Selective color, and a randomized gradient fill (noise samples, a grayscale mapping tool), does not create faces or addtional details. I know this from using PS CS3.
None of these steps (hints) alter an image. Your book recommendation does not apply.
Given that said, I have used those steps to get from this image...
http://www.marsesa.9f.com/slide_shows/Sol_537_Dust_Devil/PIA04154_A.jpg
To this image...
http://www.marsesa.9f.com/slide_shows/Sol_537_Dust_Devil/PIA04154_B2A5.jpg
This.....
http://www.marsesa.9f.com/slide_shows/Sol_537_Dust_Devil/PIA04154_B2A11A.jpg
Finally, this image..What are we looking at?????....A randomized generated image???....Alterations just by using Surface Blur and such???
http://www.marsesa.9f.com/slide_shows/Sol_537_Dust_Devil/PIA04154_E7A4.jpg
http://www.marsesa.9f.com/slide_shows/Sol_537_Dust_Devil/PIA04154B2A16C.jpg
I do not use pen tools, cloning tools, or any type of drawing steps.
What kind of program creates artwork on its own???.....
As I said earlier, I did not take notes or saved my history....I wish I did....
Ken

Strange stiching white lines in placed images...

Hi,
I'm having some problems with Illustrator CS2.
When i place a .PSD file (1 layer, photo, transparent background) with 300 dpi / CMYK 8bit into my main page, i get these strange stitching white lines over the image.
Not only that, but after working on my arrangement some more, if i click my placed image, i notice how Illustrator has sliced it into 2 or more parts..
This is annoying, since getting those white stitching lines doesn't really make me safe for print, and also bothers me that Illustrator slices the image into 2 or more parts without asking or confirmation.
Anyone knows how i can fix this problem?
Thanks,
John

Hi,
I'm having some problems with Illustrator CS2.
When i place a .PSD file (1 layer, photo, transparent background) with 300 dpi / CMYK 8bit into my main page, i get these strange stitching white lines over the image.
Not only that, but after working on my arrangement some more, if i click my placed image, i notice how Illustrator has sliced it into 2 or more parts..
This is annoying, since getting those white stitching lines doesn't really make me safe for print, and also bothers me that Illustrator slices the image into 2 or more parts without asking or confirmation.
Anyone knows how i can fix this problem?
Thanks,
John

White lines appear in PDF

I have a user that is having white lines appear around different objects in PDFs when she attaches them into Mail. Anyone else having this problem or have a solution. I can't find anything searching it.

Clarify please: not only does the recipient see these white lines, but she also sees them as she composes the message and attaches the PDF?
Would it be possible for me to see an example of this? If so, my email address can be found by clicking on my name to the left of this post, and looking in the bio line of the resulting Profile. I have Acrobat 9, btw, as well as other apps to examine it with.
Ernie

D 110 printer puts a white line on scanned images

D 110 printer puts a white line on scanned images. Not a glass problem. Have reinstalled software with no improvement

I hope you are doing well and welcome to the HP forum;
If you are using windows xp or later please run this utility to see if they are CLICK HERE
You can use this article for additional troubleshooting GO HERE although you mention that you did some of the recommend steps it will not hurt to follow the article and do them one more time.
Hope this helps and if you need further assistance please let me know I will do my best to assist you.
Hope this helps;
RobertoR
You can say THANKS by clicking the KUDOS STAR. If my suggestion resolves your issue Mark as a "SOLUTION" this way others can benefit Thanks in Advance!

White Lines appear on Images in Adobe Photoshop CS3

Similar Messages

Maybe you are looking for