White list of computer part nx7400

Hi
Can somebody say mi what is in white list of  bios of my nx7400 computer
I want replace some part and do not know what will  be by white list disabled.
Or it is some possibility how to disable white list in my  computer.
(I have version with drDos and use linux in it )
I want to change
wifi
disk
memory
Thank you for help

Yes this one is about supported HW by HP but mini pc cart which is on white list  now is not  possible to by I wont to replace broken one to new from Hardware and software point of view it must work  (PCI atandart )  I do not know what is from  business  reason in white list enabled  if only ID o HW vendors or also  ID of equipment.
=> it is possible to change device from same vendor to new one.. or   it must be   same type
Other possibility is that control is done on MAC address of wifi  (there is hardcoded vendor and type)
1)  I do not know mechanism of white listing (parsing PCI ID, MAC, DMI or other information or mechanism)
2) I do not know  what is in white list and what will be disable.
3) I do not know how to force this (business only restriction)
For me is not necessary to have support fro HP for spare part (notebook have 4 Years after Guarani period)
But I wont to upgrade myself  broken parts and information's this one I can not find.
And other point of view , there is software restriction to fix  hardware problem  ("buggy bios with white list")
Thank for  you

Similar Messages

  • So randomly my ipod crashed and when i turned the ipod on again it was all white and blurred. Part of the screen is up to speed but the other half is slow. Already tried turning it completely off and restoring it on the computer

    So randomly my ipod crashed and when i turned the ipod on again it was all white and blurred. Part of the screen is up to speed but the other half is slow. Already tried turning it completely off and restoring it on the computer

    First, try a system reset.  It cures many ills and it's quick, easy and harmless...
    Hold down the on/off switch and the Home button simultaneously until you see the Apple logo.  Ignore the "Slide to power off" text if it appears.  You will not lose any apps, data, music, movies, settings, etc.
    If the Reset doesn't work, try a Restore.  Note that it's nowhere near as quick as a Reset.  It could take well over an hour!  Connect via cable to the computer that you use for sync.  From iTunes, select the iPad/iPod and then select the Summary tab.  Follow the on-screen directions for Restore and be sure to say "yes" to the backup.  You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPad/iPod.  Again, say "yes."
    At the end of the basic Restore, you will be asked if you wish to sync the iPad/iPod.  As before, say "yes."  Note that that sync selection will disappear and the Restore will end if you do not respond within a reasonable time.  If that happens, only the apps that are part of the IOS will appear on your device.  Corrective action is simple -  choose manual "Sync" from the bottom right of iTunes.
    If you're unable to do the Restore, go into Recovery Mode per the instructions here.  Also, if you have IOS-7, read this.

  • Have JQuery for List View web part, But Full Text Not Visible

    I have a list view web part on a page with which, I've edited the view the way I need which includes grouping.
    Inside IE's Developer tools, I can see the structure (TD and then an anchor tag linking to document) and see the class SharePoint uses for that TD. BUT - when I view the source for the page, none of the actual text in the created view shows up at all!
    What I need to do is to wrap the text inside that TD with more html tags, along with adding a left padding. Adding the padding to the CSS file actually works fine.
    The problem is, that when I add the JQuery to wrap everything in the TD the way I need it, since it technically hasn't been rendered yet, even with a document ready function around it, the JQuery never does what it is supposed to do.
    here's the JQuery:
    $('td.ms-vb').each(function() {
    $(this).find( 'a' ).wrap(
    $('<ul style="padding:0px;margin:0px;;">
    <li style="list-style-type:disc;color:white"></li></ul>') );
    I know the JQuery code works because I've tried it on a plain HTML page. The problem is the way the List View web part renders the output. since it's not available on the screen, the JQuery does not work.
    I really need to do this without any programming, since this type of interface appears many times throughout the site.
    Any ideas on how to accomplish this (get the HTML to show in 'view source' so I can apply the JQuery)?

    (bump)
    anyone?

  • Add IP address ranges to my airport extreme firewall white list.

    I need to add IP address ranges to my airport extreme firewall white list.   This is so Security Metrics can access my computer and approve a scan for my credit card PCI compliance.  How do i add ip ranges?

    Sorry, but this option is not available with the AirPort routers. The only control you have over the AirPort's NAT firewall is either to enable/disable it or to configure it for Port Mapping. There are no option that supports whitelisting/blacklisting IP addresses/ranges.
    If this is an important requirement, you may need to replace your current AirPort with another vendor's product that will support this.

  • "White Listed" Wireless Network Cards

    I was wondering if anyone could tell me whether or not I could install a "Lenovo Branded" Intel Ultimate N Half-Mini Network Card in my ThinkPad Edge E530. I have upgraded to a SSD as well as 16 GB Ram, and would like to utilize these improvements over and above what my current Intel 2230 b/g/n can deliver. Since it is on the "White List", is there any way to adapt my machine to utilize its' potential? I have downloaded whatever "Access Connections" Lenovo offers, and installed all the pre-requisite software. Am I still limited to the two paltry offerings Lenovo has delineated for the E530......should this be the case, I'll never purchase another Lenovo machine.......
    I would really appreciate if someone more knowledgable than I could enlighten me regarding this frustrating restriction.....The "Access Connections" implied that downloading and installing the designated software would enable the use of any or all of the "supported devices". 
    Thanks to anyone and everyone in advance for shedding some light on this issue........fruhlpmd......
    Solved!
    Go to Solution.

    The white list is a per-machine-type thing.  It's part of the BIOS.
    Probably the best reference is the parts manifest for your machine:  http://download.lenovo.com/parts/ThinkPad/E530_FRU_BOM_V2.pdf
    From that PDF:
    60Y3195  FRU 6250 WiMax
    60Y3247  FRU FXC 11WLAN
    60Y3249  FRU LTN 11WLAN
    60Y3257  FRU Gobi3 WWAN
    60Y3297  FRU H5321w
    Unless the BIOS has been updated since that list, those are your options.  Make sure any card you choose actually has the Lenovo FRU.
    [edit] Hmm, I don't see the 2230 on that list.  There must be more to this story.
    Z.
    The large print: please read the Community Participation Rules before posting. Include as much information as possible: model, machine type, operating system, and a descriptive subject line. Do not include personal information: serial number, telephone number, email address, etc.  The fine print: I do not work for, nor do I speak for Lenovo. Unsolicited private messages will be ignored. ... GeezBlog
    English Community   Deutsche Community   Comunidad en Español   Русскоязычное Сообщество

  • 2180us wifi card update? New card not on white list

    I bought a dual band 802.11ac card with the intention of updating the single band 802.11n card in my laptop. It is a dm4-2180us. When I put it in I discovered that the BIOS will not boot the computer. I since learned that the BIOS has a white list of acceptable cards. All others are prevented from booting. All seemingly from 4 years ago!
    What options do I have to go to 802.11ac dual band? Is my otherwise perfectly fine laptop stranded with sub par networking?
    I have two of these laptops and two of these cards I cannot use.
    I am frustrated.
    -Tom

    So, it seems that HP agrees that the white list was a bad idea in that they no longer do it. But that does not solve the problem for people who have laptops from that period. My understanding is that a lot of the BIOS's have RSA keys, so that it is impossible for a user to modify them.  Actually I have looked for a modded BIOS for this model and it seems to not be avialable.
    Also there are no cards avilable that offer ac or dual band.  For that matter how would I know what is on the whitelist other than a handful of cards from 5 years ago.
    HP is still updating the BIOS from time to time.  Mine is in the file sp60704.exe (01651.fd). It is probably a 2 line code change. I wish they would supply an update removing the white list.
    I'd get a USB dongle but the machine has USB 2.0 and that is actually slower than the new wifi cards. Also USB has its own throughput issues, even if I had USB 3.0 it would run slover than the max data rate.
    I feel that HP owes buyers of these older machines some kind of a fix. Especially given that their policy is to not implement white lists  in BIOS anymore.

  • List view web part not reflecting changes made to list view in SharePoint Designer

    Dear All,
    When adding a list view web part containing a view modified in SharePoint designer (e.g. conditional formatting applied, or group headers modified) I'm finding that the changes made in SPD are not reflected in the web part. 
    For example, I go into SPD edit a view, and the view appears correctly when I go back into SharePoint, however when I link to the view within a list view web part it results in losing the changes made in SPD. 
    Becasue it's a publishing page I'm unable to edit the contents of the web part in SPD.
    I'm sure this is expected behavior but how do I get around this?
    Thnaks,
    MDB

    Try below
    http://stackoverflow.com/questions/19533998/sharepoint-designer-doesnt-show-anything-in-list-and-libraries-link
    http://social.msdn.microsoft.com/Forums/sharepoint/en-US/a63a1894-6b1d-420a-95dd-b6c546eab34d/updates-made-to-sharepoint-designer-2010-workflow-do-not-show-up-on-the-server?forum=sharepointcustomizationprevious
    http://stackoverflow.com/questions/5959521/sharepoint-designer-saves-the-changes-but-it-does-not-affect
    http://social.technet.microsoft.com/Forums/en-US/1e9a8c27-bbc5-4a6f-8daf-4b243182f543/changes-in-sharepoint-designer-2010-not-showing-in-sharepoint-server-2010-page?forum=sharepointadminprevious

  • LG G2 block text message black/white list ???

    K, I just got the LG G2 the other day and say that when you go to block a text message there is a black and white list.
    What are the differences?

        Dizzybandit, I want to make sure that we are getting you the correct information. I'm not exactly finding where this list is at. Can you please tell me where you see this? Are you going into Messaging (the Green smiley face conversation bubble)?  Or are you using a different application? We really want to get to the bottom of this ASAP.
    KevinR_VZW
    Please follow us on Twitter @VZWSupport

  • List view threshold error in list view web part, column indexing not working

    Hello all,
    I have a list with about 8000 items and the list view threshold is set at 5000. I want to filter the list by a certain column ("Title", single line of text) so I indexed that column. I can filter the list (AllItems.aspx) however if I put the list
    on a web part page (in the form of a list view web part), I can't filter by that column. Shouldn't the indexed column allow this?
    Note that the threshold will not be increased and a daily time period to bypass the threshold is in place, but I'm looking for a solution for any time of they day.
    Thanks!

    Thanks for your response. Your suggestion did work! It got me thinking and I took some time to investigate this column indexing stuff a little closer. I had an "ah-ha" moment.
    Regardless of whether the column has an index or not, dynamic drop down filtering in a list view web part will only work if the list view has fewer items than the threshold. This is the critical point I was missing. I was assuming the index would allow for
    drop down filtering.
    Thanks again!

  • Display Calendar View in List View Web Part

    We have a list and a calendar view of the list. I wanted to display the calendar view of the list in a List View Web Part in another page in the site.
    When I select the 'Calendar View' from the Views drop-down - it does not work.
    Please can you help.

    Hi Aritra,
    Is there some errors on your environment? So, you can have two workaround to do it.
    You can use SharePoint designer to add an empty data view source on your page ,then select the page.
    Use 
    Page viewer web part on your page, then put your calendar view web part page URL into your PVWP.
    Thanks,
    Jack
    Jack Gao
    TechNet Community Support

  • Cannot create mysites from powershell: Original XSLT List View Web Part not found

    I have a bizarre problem in my SharePoint 2013 farm. This does not occur in my test farm, only in the farm we were going to go live with.
    I'm on windows Server 2012, SQLServer 2012 SP1, SharePoint 2013 April CU. 1 appserver/centraladmin server, 2 web servers.
    When I log into our mysitehost and click newsfeed, it will create a mysite (even though first it displays "we are sorry there was a problem creating your site")
    But from powershell, whether I use $UserProfile.CreatePersonalSite() or New-SPSite, I get the following error:
    Original XSLT List View Web Part not found
    So far I've only found one other person with this:
    http://social.msdn.microsoft.com/Forums/sharepoint/en-US/2503e42c-e114-4e89-8e00-89fe70f0b154/cannot-create-sharepoint-mysite-programmatically
    This is a brand new farm, created with the same scripts I created my test farm with, and same version of SharePoint. Only the service accounts are different. (Farm account has admin on the servers right now since I was setting up profile service).
    Some other errors from the same correlation ID that look related:
    It can't seem to find the listemplate 101
    And something looks wrong with the MySiteDocumentLibrary feature
    I have tried the following:
    1. run psconfig.exe on each server
    2. install-spfeature -AllExistingFeatures
    3. looped through the directory under Features and for each called Install-SPFeature $dirname -Force
    4. uninstalled and reinstalled MySiteDocumentLibrary feature
    5. blew away the whole farm (removed all servers from farm, deleted all databases) and recreated it.
    6. tried creating the UPA from the CentralAdmin gui.
    The only real difference I can think of between the working farm and non working farm is, I installed the working farm using RTM, then as they came out added the March PU and April CU. For this farm I installed RTM and March and April, and then ran my build
    farm script.
    I am at a loss. What do I need to do, re-install the binaries? That's all I can think of. What I love is that our test / POC system worked fine, and now 2 weeks before go-live I'm seeing errors on the production servers I've never seen before. Using the
    same scripts no less.
    Feature Activation: Feature 'Fields' (ID: 'ca7bd552-10b1-4563-85b9-5ed1d39c962a') was activated
    Feature Activation: Feature 'CTypes' (ID: '695b6570-a48b-4a8e-8ea5-26ea7fc1d162') was activated
    No document templates uploaded for list "$Resources:core,global_onet_solutiongallery_list;" -- none found for list template "100"
    Failed to find <ListTemplate> tag corresponding to ID "101", tried both onet.xml for site definition ID "0" language "1033" and global site definition. Operation failed.
    No document templates uploaded for list "$Resources:core,stylelibraryList;" -- none found for list template "121".
    System.Runtime.InteropServices.COMException: A user may not remove his or her own account from a site collection.<nativehr>0x81020051</nativehr><nativestack></nativestack>, StackTrace: at Microsoft.SharePoint.SPUserCollection.UpdateMembers
    Feature Activation: Feature 'MySitePersonalSite' (ID: 'f661430e-c155-438e-a7c6-c68648f1b119') was activated
    Feature Activation: Activating Feature 'MySiteDocumentLibrary'
    Calling 'FeatureActivated' method of SPFeatureReceiver for Feature 'MySiteDocumentLibrary'
    SharePoint Foundation Upgrade MySiteDocumentLibraryFeatureReceiveraj08n INFO Creating new My Documents library
    Unknown SPRequest error occurred. More information: 0x80070002
    SPRequest.GetMetadataForUrl: UserPrincipalName=, AppPrincipalName= ,bstrUrl=http://contoso/personal/cbuchholz/DOCUMENTS ,METADATAFLAGS=59
    System.IO.FileNotFoundException: <nativehr>0x80070002</nativehr><nativestack></nativestack>, StackTrace: at Microsoft.SharePoint.SPWeb.GetObjectForUrl at Microsoft.SharePoint.Portal.UserProfiles.MySiteDocumentLibraryUtil.GetSPObjectFromUrl ...
    <nativehr>0x80070002</nativehr><nativestack></nativestack>There is no Web named "/personal/cbuchholz/DOCUMENTS"
    Possible mismatch between the reported error with code = 0x81070504 and message: "There is no Web named "/personal/cbuchholz/DOCUMENTS"." and the returned error with code 0x80070002.
    Attemping to add webpart id 0F6072F2-E804-4CFD-837E-BB37332B9D1C to web http://contoso/personal/cbuchholz
    Adding XsltListViewWebPart calling SPRequest::CreateListViewPart. Web part id 0F6072F2-E804-4CFD-837E-BB37332B9D1C, web http://contoso/personal/cbuchholz
    Feature receiver assembly 'Microsoft.SharePoint.Portal, Version=15.0.0.0, Culture=neutral, PublicKeyToken=71e9bce111e9429c', class 'Microsoft.SharePoint.Portal.UserProfiles.MySiteDocumentLibraryFeatureReceiver', method 'FeatureActivated' for feature 'e9c0ff81-d821-4771-8b4c-246aa7e5e9eb' threw an exception: System.InvalidOperationException: Original XSLT List View Web Part not found at Microsoft.SharePoint.Portal.UserProfiles.MySiteDocumentLibraryUtil.ReplaceListViewWebPart
    Feature Activation: Threw an exception, attempting to roll back. Feature 'MySiteDocumentLibrary'
    Exception in EnsureFeaturesActivatedAtSite: System.InvalidOperationException: Original XSLT List View Web Part not found
    Failed to activate site-collection-scoped features for template 'SPSPERS#2' in site collection 'http://contoso/personal/cbuchholz'
    Failed to apply template "SPSPERS#2" to web at URL "http://contoso/personal/cbuchholz
    I've had other problems in this farm: the bug where when you add Administrators to a Search Service via the Manage Service Applications page, it removes the SPSearchDBAdmin role from the search service process account. That one did not happen in the other farm.
    At least other people have that one and I could just use the farm admin instead (still troublng of course).

    Ok,
    Here is the problem:
    When creating a mysite from powershell or script, apparently you can ONLY do this from a wfe (or a server running Microsoft SharePoint Foundation Web Application in services on server).
    You CANNOT create mysites from script on your appserver if it is not also a Web Application Server. I confirmed the same is true in my test farm. I guess I was always running most of these scripts on the webserver.
    I searched all over and cannot find this documented anywhere.
    Who do I contact to have Microsoft document this?
    It's Thursday morning, I've been working non stop since Saturday morning so you don't have to :)

  • Items to display in list view web part not showing the items setup

    Hi, I have the following issue. I have a list view web part, but the web part is showing more items that the ones setup in the: Number of items to display in list view web part for this view.
    It is because that works when using datasheet view and not a normal view? Is there any technical documentation from Microsoft supporting this?

    thank you for your answer. It is interesting that the mobile view with the items to show in the mobile view doesn't work in the webpart, but it works when you are using datasheet view, but if you uncheck to activate the mobile view, then, the webpart doesn't
    show information, so, it works partially because one part works and not the other.

  • List View Web part not showing all available views for list

    We have added a list view web part to a page, and we get the "Current View" link in the web part...which is configurable when modifying the actual web part.
    What we'd like to see (instead of having to click the ellipses button/context menu to get the other views) is the views displayed horizontally like when you are viewing the list itself.
    When viewing the list itself, we see "All Items" "View 1" "View 2", etc.
    Is this possible in the list view web part to display all available views in a horizontal/breadcrumb layout?  Please advise.

    The below works via alert, just need to now assign data to a <DIV> or element for display.
    Trying this in simple webpart code snippet to get back all views:
        <script>
        var viewCollection = null;
            function runCode() {
                var clientContext = new SP.ClientContext.get_current();
                if (clientContext != undefined && clientContext != null) {
                    var web = clientContext.get_web();
                    var listCollection = web.get_lists();
                    var list = listCollection.getByTitle("MyListName");
                    this.viewCollection = list.get_views();
                    //var viewInfo = new SP.ViewCreationInformation();
                    //viewInfo.set_title('MyView');
                    //this.viewCollection.add(viewInfo);
                    clientContext.load(this.viewCollection);
                    clientContext.executeQueryAsync(Function.createDelegate(this, this.onQuerySucceeded), Function.createDelegate(this, this.onQueryFailed));
            function onQuerySucceeded() {
                var viewInfo = 'Tasks list current views: \n\n';
                var viewEnumerator = this.viewCollection.getEnumerator();
                while (viewEnumerator.moveNext()) {
                    var view = viewEnumerator.get_current();
                    viewInfo += view.get_title() + '\n';
                alert(viewInfo);
            function onQueryFailed(sender, args) {
                alert('Request failed. ' + args.get_message() + '\n' + args.get_stackTrace());
        </script>
        <a onclick='return runCode();'>Click here</a>
                            

  • SharePoint 2010 List View Web Part not showing for read-only users?

    Hello all,
    I have List View Webparts on my Blank Web Part page, and it's not showing for Read-Only users.
    Is this intended by Microsoft or is it a bug?
    Thank you!

    Hi,
    According to your post, my understanding is that the read only user could not see the list view web part.
    Per my knowledge, the issue may be cause that the user do not have the proper permission for the list.
    1. Check whether the user can access the list.
    2. Check whether the user can view all the items instead of partial items in the list.
    3. Check whether there are some fields refer to other lists or terms, especially the lookup field or managed metadata filed.
         If that is the case, make sure the user can access the lookup list.
    Thanks,
    Jason
    Forum Support
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
    [email protected]
    Jason Guo
    TechNet Community Support

  • Missing views dropdown on list view web part.

    I asked this before, and it got moved to "admin" with no replies.  I really need to know this.  I think it may be appropriate for design and customization, because I think that's what the solution may require.  It doesn't appear to be an "admin" issue.
    Any help will be gratefully received.  I am very frustrated by this.  The  "View:" dropdown list on the right side of the list view web part for my document libraries is not available.  The truly weird thing is that in a few cases, it is there, but I can't tell any difference between those web parts or DLs and the ones without the views drop-down.  I have defined several public views for each document library. There are no "closed" web parts on the page (which was one suggestion I got).
    I can't figure out why the views menu sometimes appears and sometimes does not, when there appears to be no way to control it. Can anyone enlighten me or suggest how I can make it appear?  My users are threatening to demand a separate web part for each view (there are hundreds).  I may have trouble using SPD on the client's site.

    That works if the Web Part was Closed, but does not help if the user deleted the Web Part. 
    After some digging around in SharePoint Designer and in SharePoint itself, I have a solution for restoring the View dropdown after the out-of-the-box List View Web Part has been deleted.  This solution can be accomplished without SharePoint Designer if you are working with a library, but to clean out the views from a list, you will need SharePoint Designer.  I am doing this in MOSS 2007 SP1, but it should work for WSS 3.0 as well.
    For this example, I am using a document library called Public Documents and my View is allitems.aspx, but this should work for any list or library. 
    Here are the steps for bringing back the View dropdown:
    1.       Navigate to the list or library that is missing the View dropdown
    2.       Go to Site Actions > Edit Page > Add a Web Part .  In the Lists and Libraries section, check the box next to the Public Documents library and click the Add button.
    3.       Within the new Web Part, go to edit > Modify Shared Web Part and change the Toolbar Type to “Full Toolbar”.  Click the OK button.
    4.       Click the link to Exit Edit Mode and you should have the Full Toolbar for the list/library displayed, but it is still missing the View dropdown menu. 
    5.       Go to Settings > Create View .
    6.       Choose Standard View .
    7.       Name the view, check the “Make this the default view” box, select the columns to include, and click the OK button.
    8.       Voila, the View dropdown menu is back on the site.
    9.       To completely clean it up, for a list, open in SharePoint Designer and delete the allitems.aspx view from the Forms folder.  For a library, you can go to the Actions menu and select Open with Windows Explorer .  Open the Forms folder (you may need to show hidden files to see this folder) and delete the allitems.aspx view.  If you do not have access to SharePoint Designer and you are working in a list, you will need to delete the link on the Quick Launch and add again to point to your new view name.
    10.   If the View you deleted was the default for the list or library, it may remove the link from the Quick Launch.  It can be added again by going to View All Site Content , selecting the appropriate list or library, going into its Settings menu, and modifying the Title, description and navigation settings to show on the Quick Launch.

Maybe you are looking for