White menu screen and white viewer screen

I'm having a problem with all visuals related to projects. Any template or video I add does not show up except for outlines. This is happening with past projects as well and only just began about a week ago. I've switched Final Rendering, dumped prefs. After dumping prefs, I'll load a known working project and is shows just fine. But, as soon as I click anywhere on the screen, everything turns to white. This happens in Menu and Viewer tabs. I hear audio but no video. Thanks in advance.

That sounds a little severe. Have you made any changes at all to your Mac - changed graphics cards or anything? Also, do you use a font management app like suitcase? If you do, have you turned off any of the fonts DVDSP uses as part of the system? I know it sounds odd, but this has caused all kinds of issues for people in the past and the only resolution was to turn on the system fonts again.
Have you run a hardware test (using the Apple hardware check disc that your mac came with)? I am no expert on any of this stuff, but check your graphics card... I had one with bad memory and many, many glitches started to appear which just got worse over time. Changed the graphics card and all was fine.

Similar Messages

I have a late 2011 Macbook and whenever I open any application it opens only the top menu bar and no viewer windows.I always have to click cmd n to open new windows and it is quite annoying.Does anyone know how to fix this issue? Thx

I have a late 2011 Macbook and whenever I open any application it opens only the top menu bar and no viewer windows.I always have to click cmd n to open new windows and it is quite annoying.Does anyone know how to fix this issue? Thx

You may have more of a chance getting a quicker answer here:
https://discussions.apple.com/community/windows_software/windows_compatibility

Menu size and button viewing

I've been using FCS2 for quite awhile with no problem with DVDSP. I had to clean install my system, so decided to upgrade to the latest versions, which for DVDSP was 4.2.1. (OS 10.5.2 at the time)
When I opened the new version of DVDSP for the first time, the layout was a little different, which I can live with. What I am having trouble with is the viewing of the menu. It is quite a bit smaller ( on a 30" monitor it is about 4x6 inches in size) and I can't increase the viewing size at all.
I make my menus in photoshop. When I try to draw buttons, the buttons used to stay on the screen so when I drew a second button I would know where the first one was so as not to overlap. Not so now. The other buttons are not visible, although if I click on the word where I have made a button that particular button will come back up (only that button, though).
I need to make the viewing size larger and see all the buttons at once that I have drawn. Is this possible in vs 4.2.1? It used to be in previous versions.
Thanks.
Sharon

There are three viewing modes for DVDSP - basic, intermediate and advanced. You can switch between them at any time using the apple key on your keyboard and either the number 1, 2 or 3. For access to all of the features, use the advanced mode.
When the app opens in this mode there are four distinct 'quarters' to the display. You can use your mouse to get the pointer in the border between each section and simply drag to widen the display of that section. As you do, a corresponding section will reduce in size. If you click on the intersection of the four quarters and drag that then you can re-size all four at once.
Menu display will not get very large at all, but you can click on the menu viewer tab within it's quarter and drag it 'out' of the quarter to be in its own window that floats above the other quarters. You can then use two monitors and drag the menu viewer onto a second screen, which, if you change the resolution, will appear larger.
In this respect DVDSP has remained the same since version 3.

How do i drag media to the menu screens in premiere elements 13? I can't see my audio files and the menu screens at the same time. In prior versions it was easy

How do i drag media to the menu screens in premiere elements 13? I can't see my audio files and the menu screens at the same time. In prior versions it was easy?
It is very cumbersome to "re browse" for audio files/pics/movie clips to add to menu screens. Certainly there is a way to view the media and menu screen at the same time so I can drag and drop?

Jayhawk
I think I know exactly what you are seeking and believe it cannot be done in Premiere Elements 11, 12, and 13 as it can be done in versions earlier than 11 where the Disc Layout and Project Media are viewed side by side.
Premiere Elements 13 uses a Movie Menu customization workspace which is not allowing viewing of Project Assets in the Expert workspace at the same time.
ATR

Menu Exits and Screen Exits

hi everyone,
can you send me some examples on menu exits and screen exits.
thank you.
preetham

Hi Preetham,
In older versions MENU Exits approached through Transaction CMOD by creating
PROJECTS and activating the project and assigning Program to that
Transaction Codes. For MENU Exits, Transaction Codes will be starting with
"+" sign and with default text "NODE TEXT NOT FOUND" for which you can
assign your Report or Dialog Program etc., (for Eg:- +DW4 MENU Exits
Transaction available in TOOLS --> ABAP Workbench --> Utilities --> <Node
Text Not found>).
Procedure for Creating MENU Exits.
1) To get into Area Menu Maintenance Screen Type SE43 T.Code in Command
Line.
2) In Area Menu Paramenter type 'S000' (S triple Zero)
3) Then Press Change Icon in Application Tool Bar. Then It may ask for
Access Key [or] it may display "Specify Processing mode" window. If it ask
for the Access Key Check for the availability of OSS Note and apply to open
Standard SAP Menu to include MENU Exits. Otherwise, if it display "Specify
Processing mode" window with Three Push Button. In which select "Change" and
proceed further.
4) Then it will display "Information" window with the following information
"Caution : The Original Language of the structure is German (editing lang. :
English) ". Then press "Enter Key to proceed further.
5) Then you will get into "Edit Area Menu S000".
6) for eg:- Expand Tools Menu.
7) Then Press ABAP Workbench <Icon>.
8) Then you will get into ABAP Workbench Menu Tree.
9) Then Expand Utilities Menu.
10) In the last line you will find one MENU EXIT Provision to include your
own menu. "Node Text Not Found" This text can be change by double Clicking
that. There you can find the T.Code. Here for Eg:- "+DW4".
11) for eg: - Here change the Text to "Sample Menu Exit" and then note down
the T.Code "+DW4".
12) Then Save with Change Request Number and come out of Transaction SE43.
13) Then Goto Transaction SE93.
14) Then type T.Code "+DW4" and press Create.
15) Then proceed further to create transaction called "+DW4".
I hope this could help you in Creating Menu Exit...
Creating menu exits
http://help.sap.com/saphelp_nw04/helpdata/en/c8/19762743b111d1896f0000e8322d00/content.htm
http://help.sap.com/saphelp_nw2004s/helpdata/en/83/7a18cbde6e11d195460000e82de14a/frameset.htm
For screen exits.
http://wiki.ittoolbox.com/index.php/HOWTO:Implement_a_screen_exit_to_a_standard_SAP_transaction
Screen exits add fields to screens in R/3 applications. SAP creates screen exits by placing special subscreen areas on a standard R/3 screen and calling a customer subscreen from the standard screens flow logic.
the tcode is cmod...
1.From the main screen of the Project management transaction, proceed as follows:
Select Enhancement components and choose Change.
2.Choose Edit component.
3.Choose the screen exit and double click on it
4.Create your subscreen using the Screen Painter.
5.Design your screen to be added to the standard screen and activate the particular screen and return back to the flow logic .
6.Choose the PAI and PBO to write down the logic.
7.Generate your screen and choose Back (the green arrow) to return to the Project management transaction.
8.Go to the transaction ME22 to view the customer defined screen exit.
9.Enter the purchase order number and press Enter.
10.Go to the menu header --> Details.
11.Purchase number is visible on the standard screen
check the foll link,
http://wiki.ittoolbox.com/index.php/HOWTO:Implement_a_screen_exit_to_a_standard_SAP_transaction
Menu exits allow you to add your own functions to the pulldown menus in standard R/3 transactions. To take advantage of a menu exit, you first need to create a project as described in the section Creating an add-on project. Then, you must include the SAP enhancement package that contains the menu exit you want to use in your project. From the main screen of the Project management transaction, proceed as follows:
Select Enhancement components and choose Change.
The system lists all customer exits contained in the enhancements included in your project.
Place the cursor on the menu exit you want to add your own function to.
Choose Edit component.
The system displays technical information about the menu entry. It also displays two input fields where you can specify a language and the text you want your menu item to have.
Enter the name of your menu function (such as Special order method) in the field New text.
Choose Save text.
Your special menu function will not appear in the pulldown menu of the corresponding standard transaction until you activate your enhancement project.
Specifying a menu text and activating your project are not the only steps you need to take to make your own menu item work. After you carry out these steps, your menu item will appear, but it will not call a corresponding function. To attach your menu entry to its corresponding function, you need to create a function module for the function module exit associated with your menu text. This function module exit is part of the same SAP enhancement that contains the menu exit you used. Creating Customer-Specific Function Modules tells you more about how to use function module exits.
also refer
MEnu Exit
http://www.sap-img.com/abap/what-is-user-exits.htm
Creating menu exits
http://help.sap.com/saphelp_nw04/helpdata/en/c8/19762743b111d1896f0000e8322d00/content.htm
http://help.sap.com/saphelp_nw2004s/helpdata/en/83/7a18cbde6e11d195460000e82de14a/frameset.htm
For screen exits.
http://wiki.ittoolbox.com/index.php/HOWTO:Implement_a_screen_exit_to_a_standard_SAP_transaction
chech these links for user exists its usefull
http://www.allsaplinks.com/user_exit.html
Re: Screen exit
user exit and customer exit
http://help.sap.com/saphelp_47x200/helpdata/en/dd/561602545a11d1a7020000e829fd11/frameset.htm
http://www.sap-basis-abap.com/sapab013.htm
http://www.sap-img.com/abap/what-is-user-exits.htm
How to implement screen exit for a SAP standard transaction
Introduction
SAP provides standard transactions to enter data into database. But a client may want to maintain some additional information in SAP other than what is provided.
To make provisions for this, additional screens have to be provided and additional fields must be added into appropriate database table.
To pave way for this, SAP has provided the option for screen exits. Usually, SAP provides the following:
An append structure in the database table with the new fields.
A subscreen area into the standard screen where the programmer can attach his subscreen of his own program with the new fields.
A function group under which the new subscreen has to be created with the new fields.
Function exits to synchronize the PBO and PAI of the standard SAP program with the PBO and PAI of the subscreen so that data can flow back and forth between the standard SAP program and the program written by the developer for the subscreen. These function modules also exist in the same function group under which the subscreen will have to be developed.
Finally, a linkage has to be done between the subscreen area of standard SAP screen with the custom subscreen constructed by the developer.
Typically, SAP provides an enhancement in which the developer can create an append structure, use the function exits to synchronize the PBO and PAI of the standard SAP program and the custom subscreen program, and make the necessary linking( as mentioned above in step 4. But, again, this is not a hard and fast rule. Linking in some case, is also done by configurations.) SAP also usually provides the name of the function group under which the subscreen has to be developed.
Necessary guidance about implementing a screen exit development is usually available in the Documentation section of the enhancement ( can be availed by transaction SMOD).
Pre-Requisites
The developer to work on screen exit should have essential knowledge on the following:
DDIC concepts, including the knowledge of append structure.
Concept of SAP Enhancements and implementing them using Projects.
Concept of function exits.
Knowledge on Module Pool including subscreens, Tabstrip controls etc.
Steps
Guidelines
So, a developer can follow the guidelines mentioned below to implement a screen exit to a standard SAP transaction, as and when required:
Find out the Required Enhancements
Go to SMOD. Press F4 in the Enhancement field. In the next popup window, click pushbutton SAP Applications. A list will appear that contains information on all the enhancements, categorized under functional areas. Developer must search for the enhancements relevant to his functional area of interest for e.g., Purchasing, Asset Accounting, etc.
Note down the enhancements. Then, come to the initial screen of SMOD and view the documentation of each enhancement to find out which one is required for your development.
Utilize the Enhancement in a Project
After you have found one, do as directed in the documentation. Generally, the steps are as follows:
Create a project using CMOD including your enhancement.
Create the append structure with new fields.
Go to the desired function group and create a subscreen with the new fields. Write PBO and PAI for the subscreen, if required.
Use the function exits in the enhancement to link the PBO and PAI of the subscreen with that of the main SAP program supporting the SAP transaction.
Maintain necessary linkage between the subscreen area of standard SAP program with the custom subscreen developed along with the custom program name. This can be done in the project (developed by CMOD including the enhancement) or outside as a part of configuration.
Activate the project.
Test to ensure that required functionality are met.
Case Study 1
Add three new custom fields for Asset master and maintain information for them
Requirement
Three fields in the legacy system have to be maintained in Asset master. These fields are:
Original Asset number 20 characters
Location 2 15 Characters.
Model no 20 characters
Location 2 should start with L.
Pre-Analysis
Finding out the Enhancement
As described above, the enhancement is determined. It was found, that enhancement AIST0002 will serve the purpose. It contains the following components (can be viewed by transaction SMOD):
Exit Type Description EXIT_SAPL1022_001 Function Exit Check of User-Defined Fields when Using Create and Change BAPI EXIT_SAPLAIST_002 Function Exit Transfer Data for User Subscreens in PBO. EXIT_SAPLAIST_003 Function Exit Transfer of User-Defined Fields to SAP Master Data Transactions CI_ANLU Customizing Include Include structure to add new fields
Studying the Function Exits
The function module level documentation for the function exits are then viewed from transaction SE37. The documentation clearly laid out for the purpose for their use:
EXIT_SAPLAIST_002
Function module Level Documentation
This function module is called by asset master data maintenance at the start of the dialog. (When changing, it is called after reading of the data from the database; when creating it is called after the transfer of the default values from the asset class and reference asset.) The purpose of the function module is to enable this function group to recognize the master data. For interpreting or controlling master data fields that are important for user fields, it is possible to transfer to global variables at this point, so that they can be recognized when the user subscreens are processed.
Import Parameters
Understanding
This function module is called at the PBO to pass the information retrieved from the database to pass them to the custom subscreen and its underlying program. Import parameter : I_ANLU will be populated with the values for user-defined fields which will be passed to the subscreen program. So, there must be some sort of variable assignment from I_ANLU.
EXIT_SAPLAIST_003
Function module Documentation: This function module is called by SAP asset master data maintenance after the screens are processed, but before saving. The purpose of the function module is to transfer fields entered on user sub-screens of SAP asset data maintenance to the database for updating. The export parameter for this function module is:
Understanding
This function module will be used to transfer the user entered data in the subscreen fields to the main SAP program, which will then be saved into the database.
Studying the Documentation of the Enhancement
The enhancement documentation (as is viewed from the initial screen of SMOD] also supports the idea. Moreover, it informs that we need to develop a subscreen under function group XAIS. This is the function group under which the two function exit modules also exist. So, if the custom subscreen refers to the global data of the function group XAIS, then those values will also be available to these function exits as well.
Going to SE80 and viewing the function group XAIS helps us to inform that there are three DDIC tables declared for it:
Deciding the Final course of Action
After making all the investigations, the final course of action was determined.
SrlNo Step Justification
A project has to be created using transaction CMOD where the enhancement AIST0002 will be included.
Customizing include CI_ANLU has to be created with the custom fields demanded When CI_ANLU will be developed, the custom fields will get appended to the database table ANLU. Also, these fields will be used to create screen fields in the new subscreen.
A custom subscreen, say, 9000 will be developed under function group XAIS. The screen group for the screen will be CUST (or any name). The three custom fields added to table ANLU (by creating CI_ANLU) will be used to create new fields in the screen.
In the PAI of the subscreen, validation for Location to start with L will be added. The subscreen with three new fields has to be developed so that it can be attached to a subscreen area of the asset master screens.
In the custom include of the function exit module EXIT_SAPLAIST_002, the following code will be written:-
ANLU = I_ANLU. I_ANLU is the import parameter of this FM. The value is assigned to the global variable ANLU, referring which the three new subscreen fields are developed. So, data retrieved from database table ANLU will be passed to this FM as I_ANLU by the standard SAP main program. The value will be taken and passed to the global variable of the function group XAIS, so that the three custom fields (referring to ANLU of XAIS) get populated.
In the custom include of the function exit module EXIT_SAPLAIST_003, the following code will be written:-
E_ANLU = ANLU. The changed values in the subscreen fields exist in global variable ANLU for the function group XAIS. This function exit module will pass the data back to the SAP main program as E_ANLU.
Proper linkage/configuration has to be done so that the new subscreens get linked to the appropriate subscreen area of the Asset master screen. This has to be done otherwise, the new custom subscreen will not be displayed in the Asset master screens.
Development
Creating a Project to include the enhancement
Go to transaction CMOD and create a project.
Enter a description for the project. Then, click on the pushbutton Enhancement Assignments in the Application Toolbar.
Enter the name of the enhancement and Save.
Go to Components.
Creating Custom Include for ANLU
The screen shown below will appear, showing all the enhancement components under the assignment AIST0002. Double-click on the name of the Include Structure to create it.
Create the include structure with three new fields, as required. Then, save and activate it.
Develop the subscreen and the program
Go to transaction SE80. For the function group XAIS, create a new subscreen 9000.
Create it as subscreen.
Then, go to the Layout of the screen and create three new fields from Database table ANLU.
Drag the fields in the screen body and place them.
Then, save and activate the screen and come back to screen flow editor.
Create the PAI module to add validation for field Location 2, as required .
Activate the whole function group and come out.
Write code in the Function Exits to synchronize the programs
Now, code has to be written in the function modules EXIT_SAPLAIST_002 and EXIT_SAPLAIST_003 so that data flows to and fro between the main SAP program and custom subscreen program. For that, go back to transaction CMOD and change the function exits.
Write code in the function module EXIT_SAPLAIST_002 called once at the beginning of the transaction:
Write code in EXIT_SAPLAIST_003 to pass the data from the subscreen to SAP main program.
Then, activate everything the whole project and come out.
Complete the configuration to link the subscreen
The development portion is complete. Now, linking of the subscreen has to be done with the subscreen area of the main program. In most of the cases, this linking can be done in the enhancement itself. But, here, requirement is a bit different. It is done by configuration using SPRO.
Assets are created under Asset class. And for each asset class, there is a layout assigned to it. For a layout, there are multiple tab pages assigned to it. And, for each tab page, there are multiple screen groups/field groups assigned.
Here, the requirement is to create these three custom fields in the tab page General of asset master screen ( AS01/AS02/AS03/AS91).
Determine the Layout
To achieve this, first of all, we need to find out which layout is assigned to asset class 1000.For that, go to transaction AOLK( information has to be obtained from functional consultant).Select the Asset Class 1000 and click on folder General Assignment of Layout.
Here, for Asset class 1000, for all the user groups, tab layout SAP is assigned. Since layout SAP cannot be changed, it has to be copied and manipulated to include our screen group. Later, the new layout has to be assigned over here.
Create new tab layout
Go to transaction AOLA. Copy the tab layout SAP to create another layout, say, YSUB.
System will copy all the settings and will inform you about that.
Select your newly created layout and double-click on the folder Tab page titles.
You want to put your custom fields in the tab page General. So, select this tab page entry and double-click on the folder "Position of Groups".
Here, all the field groups currently residing in the tab-page General are shown. Add an entry for your newly created fields.
Select the group box from the list. An entry will come with U padded with the custom subscreen prepared by you.
Then, save and come out.
Assign the new Layout to Asset Class
Now, go to tcode AOLK and assign tab layout YSUB for asset class 1000.
Save and come out.
Test the Exit
Everything is over. Now, go to transaction code AS01/02/03 or AS91 to deal with an asset of asset class 1000. You will see your new fields added to the screen. Add values to themsave. Then, enter into the tcodes again to see whether the values entered by you are being displayed or not.
Original Source: ittoolbox.com
MENU
refer
MEnu Exit
just refer to the link below for step by step procedure with screen shots
http://www.sapmaterial.com/?gclid=CN322K28t4sCFQ-WbgodSGbK2g
Check this link:
http://help.sap.com/saphelp_nw04/helpdata/en/c8/1975e643b111d1896f0000e8322d00/frameset.htm
Menu exits allow you to add your own functions to the pulldown menus in standard R/3 transactions. To take advantage of a menu exit, you first need to create a project as described in the section Creating an add-on project. Then, you must include the SAP enhancement package that contains the menu exit you want to use in your project. From the main screen of the Project management transaction, proceed as follows:
Select Enhancement components and choose Change.
The system lists all customer exits contained in the enhancements included in your project.
Place the cursor on the menu exit you want to add your own function to.
Choose Edit component.
The system displays technical information about the menu entry. It also displays two input fields where you can specify a language and the text you want your menu item to have.
Enter the name of your menu function (such as Special order method) in the field New text.
Choose Save text.
Your special menu function will not appear in the pulldown menu of the corresponding standard transaction until you activate your enhancement project.
Specifying a menu text and activating your project are not the only steps you need to take to make your own menu item work. After you carry out these steps, your menu item will appear, but it will not call a corresponding function. To attach your menu entry to its corresponding function, you need to create a function module for the function module exit associated with your menu text. This function module exit is part of the same SAP enhancement that contains the menu exit you used. Creating Customer-Specific Function Modules tells you more about how to use function module exits.
User exits (Function module exits) are exits developed by SAP. The exit is implementerd as a call to a function module. The code for the function module is written by the developer. You are not writing the code directly in the function module, but in the include that is implemented in the function module.
The naming standard of function modules for functionmodule exits is:
EXIT_<program name><3 digit suffix>
The call to a functionmodule exit is implemented as:
CALL CUSTOMER.-FUNCTION <3 digit suffix>
To find a Exit.
Goto Transaction -- Find The Package
SMOD >f4>Use the Package here to Find the Exits In the Package.
Else if you Want to search by Application Area wise ,
There is one more tab to find the Exits in the Respective Application Area.
Implementing the Exit-- CMOD Create ProjectsAssgn your Component .
Now Run ur Transaction to Check if it Triggers.
Thats it..
Suppose you need to find out all the user exits related to a tcode.
1. Execute the Tcode.
2. Open the SAP program.
3. Get the Development Class.
4. Execute Tcode SE84.
5. Open the Node 'Envir. -> Exit Techniques -> 'Customer Exits -> Enhancements'
6. Enter the Development class and execute.
Check out this thread..
The specified item was not found.
1. Type the transaction : system->status-> <PROG. NAME>
2 open SE37 , type EXIT<PROG NAME> and press F4 to get the list of function exits available.
3. Open CMOD utilities->SAP enhancements
EDIT->All selections
4.type the function module name obtained in step 2, in fields 'component name' in 'additional selections' block. and execute.
5. The displayed list contains the enhancements names for the transaction You were looking for.
6. Create a project in CMOD and the code in default include->activate.
http://www.erpgenie.com/sap/abap/code/abap26.htm
which gives the list of exits for a tcode
http://help.sap.com/saphelp_nw04/helpdata/en/bf/ec079f5db911d295ae0000e82de14a/frameset.htm
For information on Exits, check these links
http://www.sap-img.com/abap/a-short-tutorial-on-user-exits.htm
http://www.sapgenie.com/abap/code/abap26.htm
http://www.sap-img.com/abap/what-is-user-exits.htm
http://wiki.ittoolbox.com/index.php/HOWTO:Implement_a_screen_exit_to_a_standard_SAP_transaction
http://www.easymarketplace.de/userexit.php
http://www.sap-img.com/abap/a-short-tutorial-on-user-exits.htm
http://www.sappoint.com/abap/userexit.pdfUser-Exit
http://www.planetsap.com/userexit_main_page.htm
User-Exits
http://www.sap-img.com/abap/a-short-tutorial-on-user-exits.htm
http://www.sap-img.com/ab038.htm
http://www.planetsap.com/userexit_main_page.htm
http://www.sap-basis-abap.com/sapab013.htm
http://sap.ittoolbox.com/documents/popular-q-and-a/user-exits-for-the-transaction-code-migo-3283
These links will help you to learn more on user exits.
http://www.sap-img.com/abap/a-short-tutorial-on-user-exits.htm
http://help.sap.com/saphelp_nw04/helpdata/en/c8/1975cc43b111d1896f0000e8322d00/frameset.htm
http://www.planetsap.com/userexit_main_page.htm
http://www.allsaplinks.com/user_exit.html
www.sap-img.com/abap/what-is-user-exits.htm
Also please check these threads for more details about user exits.
Re: Screen exit
user exit and customer exit
user exit
1. Document on UserExits in FI/CO
http://www.ficoexpertonline.com/downloads/User%20ExitsWPedit.doc
2. Finding User Exits...
http://sap.ionelburlacu.ro/abap/sap2/Other_Useful_Tips.html#Finding_User_Exits
3. List of all User Exits...
http://www.planetsap.com/userexit_main_page.htm
Reward points if helpful.
Thanks
Naveen khan
Message was edited by:
Pattan Naveen

My macbook pro (2010 13inch) is really laggy when I'm using apps like iTunes and safari. the arrow on the screen seems to not respond and is laggy and when viewing videos it can be really laggy. I just want to know if it was a problem i could fix, thanks.

My macbook pro (2010 13inch) is really laggy when I'm using apps like iTunes and safari. the arrow on the screen seems to not respond and is laggy and when viewing videos it can be really laggy. I just want to know if it was a problem i could fix, thanks.

You might start with:
Open Activity Monitor in the Utilities folder. Select All Processes from the Processes dropdown menu. Click twice on the CPU% column header to display in descending order. If you find a process using a large amount of CPU time, then select the process and click on the Quit icon in the toolbar. Click on the Force Quit button to kill the process. See if that helps. Be sure to note the name of the runaway process so you can track down the cause of the problem.
If the above reveals nothing helpful, then create a new user account. Log out of your account and log into the new account. Do the problems cease?

My screen is magnified on full and i can't find the menu bar and the doc.

My screen is mangified on full and i can't find the menu bar and the dock.

Hello, Melorw44.
Try pressing the <esc> (Escape) key.
If <esc> doesn't clear your full screen, restart your Mac. When you launch Safari after the restart, the normal sized window should open.
BTW, three finger double tap applies to trackpads. From your responses, I infer that you are not using a trackpad. However, if you are using a wireless mouse (or other wireless pointing device), low batteries in the device might be causing your inability to control your view.
Message was edited by: EZ Jim
Mac OSX 10.8.2

I ask the third time: How can I enlarge the menue symbols and the text of the menue in Photoshop CS6 vers.13 so that I can read them??? My laptop has Win 8.1 and a screen resolution of 3840x2160

I ask the third time:
How can I enlarge the menue symbols and the text of the menue in Photoshop CS6 vers.13 so that I can read them??? My laptop has Win 8.1 and a screen resolution of 3840x2160.
It is unbelievable that such an expensive software does not provide a proper lay out wit a high screen resolution!
It is also unbelivable that it is not possible to get a qualified employee of ADOBE on the phone in Germany.
hope of feed back: e-mail: [email protected]

Chris Cox answered your question here:
I have PS cs6 extended and a new laptop with screen resolution of 3840x2160. Now all control elements and menues are so small that I can not reed them. How can I make them readable without reducing the resolution of the schreen?

DIfference Between User Exits, Screen Exits, Menu Exits And BADI

Could any one let me know the exact/practical dIfference Between User Exits, Screen Exits, Menu Exits And BADI. ? And why BADIs are more proned to use?

Hi,
User Exits:
A user exit is a three character code that instructs the system to access a program during system processing.
SXX: S is for standard exits that are delivered by SAP. XX represents the 2-digit exit number.
UXX: U is for user exits that are defined by the user. XX represents the 2-digit exit number
Menu Exits:
Menu exits add items to the pulldown menus in standard SAP applications. You can use these menu items to call up your own screens or to trigger entire add-on applications.
SAP creates menu exits by defining special menu items in the Menu Painter. These special entries have function codes that begin with "+" (a plus sign). You specify the menu items text when activating the item in an add-on project.
Screen Exits:
Screen exits add fields to screens in R/3 applications. SAP creates screen exits by placing special subscreen areas on a standard R/3 screen and calling a customer subscreen from the standard screens flow logic.
BADIs:
Business Add-Ins are a new SAP enhancement technique based on ABAP Objects. They can be inserted into the SAP System to accommodate user requirements too specific to be included in the standard delivery. Since specific industries often require special functions, SAP allows you to predefine these points in your software.
And why BADIs are more proned to use?
In contrast to above customer exits, Business Add-Ins no longer assume a two-level infrastructure (SAP and customer solutions), but instead allow for a multi-level system landscape (SAP, partner, and customer solutions, as well as country versions, industry solutions, and the like). Definitions and implementations of Business Add-Ins can be created at each level within such a system infrastructure.
SAP guarantees the upward compatibility of all Business Add-In interfaces. Release upgrades do not affect enhancement calls from within the standard software nor do they affect the validity of call interfaces. You do not have to register Business Add-Ins in SSCR.
The Business Add-In enhancement technique differentiates between enhancements that can only be implemented once and enhancements that can be used actively by any number of customers at the same time. In addition, Business Add-Ins can be defined according to filter values. This allows you to control add-in implementation and make it dependent on specific criteria (on a specific Country value, for example).
All ABAP sources, screens, GUIs, and table interfaces created using this enhancement technique are defined in a manner that allows customers to include their own enhancements in the standard. A single Business Add-In contains all of the interfaces necessary to implement a specific task.
The actual program code is enhanced using ABAP Objects. In order to better understand the programming techniques behind the Business Add-In enhancement concept, SAP recommends reading the section on ABAP Objects.
Regards,
Ferry Lianto

Found 0 results for While browsing eBay, when I watch or bid on an item, and later view it again, many inches of white space appears before item appears. If I delete the clear recent history box, the pages will come up as they should for several times, th

While browsing eBay, when I watch or bid on an item, and later view it again, many inches of white space appears before item appears. If I delete the clear recent history box, the pages will come up as they should for several times, then go back to a lot of extra white space. How can I prevent this? Thank you, Rick in English
== This happened ==
Every time Firefox opened
== About a month ago

As stated in 1.:
1. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve the problem.
Obviously, it will not harm your computer provided you follow the instructions. However, if you don't post your results in the thread where you were given those instructions, then the person helping you cannot help you further. As he asks at the end, "please post the test results on Pastebin, then post a link here to the page you created."

When safari is in full screen mode and I move the mouse to the top of the screen to bring up the menu bar and the bookmark bar, it does nothing. Is anyone else having this issue?

When safari is in full screen mode and I move the mouse to the top of the screen to bring up the menu bar and the bookmark bar, it does nothing. Is anyone else having this issue?
Thanks

I just tested that since I hardly ever use full screen mode, this was the first time since I upgraded to Mountain Lion, and it worked fine for me.
Try shutting Safari down and see if that changes anything.
If that doesn't change anything, try shutting down and then rebooting.
Allan

Recently when I install apps, the icon does not appear on the menu screen, also, it shows that it is down loading at the app store and when complete, I can not open it or reinstall it. Help Please o,

Recently when I install apps, the icon does not appear on the menu screen, also, it shows that it is downloading at the app store and when complete, I can not open it or reinstall it. Has happened on the last 4 free apps. Help Please

Reset your iPad. Press and hold both the power and home buttons for 10-15 seconds till the Apple logo appears. Release both buttons. Wait 15-20 seconds till you iPad starts on it's own. Now try and download an app.

Apple TV 1 stops playing music, returns to a menu screen. Usually occurs after several hours. Reselecting music playlist and pushing start will get it playing again. I have not seen anything like this in the forum.

Apple TV 1 is used exclusively for music playback. The device is often in use 4 to 8 hours daily. I have had no problems with it in over two years of use. In the last few weeks it has started a new behaviour.
At random times but not always, it will simply stop playing the playlist and return to a menu screen. Playing music again requires selecting a playlist and pressing play. The device continues working and does not require restarting or resetting.
I have browsed the topics for Apple TV 1 and have not found anything similar to this problem.

Welcome to the Apple Community.
Intermittent problems are often a result of interference. Interference can be caused by other networks in the neighbourhood or from household electrical items.
You can download and install iStumbler (NetStumbler for windows users) to help you see which channels are used by neighbouring networks so that you can avoid them, but iStumbler will not see household items.
Refer to your router manual for instructions on changing your wifi channel or adjusting your multicast rate.
There are other types of problems that can affect networks, but this is by far the most common, hence worth mentioning first.

FCP7: White Viewer and White Canvas (set to RGB)

Hello,
I had been using the universal version of the first Final Cut Studio for a few years now without any issue. When I upgraded to FCS3, I can't get FCP7 to show any footage (or even Color Bars) in the Viewer or Canvas. You hear the audio of the footage but it's all WHITE. Both frames are set to RGB (not alpha).
I have fully re-installed FCP7 but I still see the same results. It doesn't seem to matter what easy setup I use either.
I can take the same DV or HDV footage and play it in Quicktime outside of FCP7 so I'm confident that my onboard graphics card is not having some sort of trouble.
I have a case open with AppleCare but so far they have not resolved this issue.
Is this White Viewer and Canvas issue happening to anyone else here?
Thanks.
Message was edited by: Udder

Trash your preferences?
#44: FCP acting weird - Trash Prefs
Shane's Stock Answer #44: FCP acting weird or unusual. Just not like is normally should
If the program was working fine, and now isn't, or just isn't working the way it should, the first things to do are:
1) Trash your FCP preferences. Download the Preference Manager from Digital Rebellion: http://www.digitalrebellion.com/pref_man.htm
http://www.kenstone.net/fcphomepage/trashing_fcpprefs.html
2) Open the Disk Utility and Repair Permissions.
3) Shut down for 10 min. Go for a quick walk around the block and get SOME exercise today. Come back, turn on the computer and see how things are.
4) (optional) Do the Hokey Pokey and turn your self about. Results may vary.
Shane

Flash menu screen and related .swf "blank"?

Unable to always obtain Flash menu screen (and related .swf file). This is really odd! On some rare occassions it is possible to successfully create flash output but most times not. As the number of successes are rare, I can't analyse & determine what is going on (output to DVD & Blu-ray is fine but can't get flash)??

That sounds a little severe. Have you made any changes at all to your Mac - changed graphics cards or anything? Also, do you use a font management app like suitcase? If you do, have you turned off any of the fonts DVDSP uses as part of the system? I know it sounds odd, but this has caused all kinds of issues for people in the past and the only resolution was to turn on the system fonts again.
Have you run a hardware test (using the Apple hardware check disc that your mac came with)? I am no expert on any of this stuff, but check your graphics card... I had one with bad memory and many, many glitches started to appear which just got worse over time. Changed the graphics card and all was fine.

When I maximize my screen on my Mac it hides the menu bar and the typed tool bar at the top of the screen - how do i fix this

When I maximize the screen on my Mac Book Pro it hides the menu bar and the typed tool bar at the top of the screen as well. How do I undo this?

10.7 "Full Screen" is a feature imported from IOS, the land of tiny screens.
To use a larger window on a REAL computer, adjust the Window's size to suit your needs. Do not use "Full Screen".

White menu screen and white viewer screen

Similar Messages

Maybe you are looking for