White notification light after update

hi my friends,
I did an update and I am afraid it's failed.
now, my Xperia doesn't power on and I just have white light on notification light.
waiting for your help.
thanks,
Alex

Make sure you charge the phone at a wall socket for at least 2 hours,retry the update with SUS:
http://www.sonymobile.com/gb/tools/update-service/
All we have to decide is what to do with the time that is given to us - J.R.R. Tolkien

Similar Messages

White screen problem after updating to 1.1 firmware

My 2G iPod Nano worked fine with 1.0.1 and 1.0.2 firmware but after updating to 1.1 I get white screen everytime I turn it on after longer period of time. Turning the iPod off and then right back on makes it work again. I have done restore 3 times without effect. I even removed the firmware files so that iTunes downloads them again when doing the restore but that didn't work either.
Should I return it or wait for new firmware? Has anyone else had this problem after updating to 1.1?

Disconnect iPod and close iTunes.
Firmware files are in "Documents and Settings\username\Application Data\Apple Computer\iTunes\iPod Software Updates" folder.
You should still have the 1.0.2 files named "iPod_19.1.0.2.ipsw" and "iPod_19.1.0.2.ipsw.signature" in there if have you upgraded from 1.0.1 version.
Remove 1.1 files from the folder so that only those to files are in there.
Disconnect from network (I switched off my wlan) so that iTunes can't download the new version. Connect your iPod and do Restore, iTunes will now use the old firmware files because it can't connect to the internet.
Fujitsu Siemens Amilo M3438G Windows XP

WRT54G v6 blinking power light after update

After performing an update for my WRT54G v6 to version 1.02.6 the power LED blinks fast. DMZ is off. All the others act normally, on when connected. I have looked in the fourms here, and online, and tried many things, all failed.
Pinging the router works. I always get a response.
I set my network adapter to 10mb half and static IP of 192.168.1.10 with gateway 192.168.1.1
Useing Linksys TFTP always fail with a "No response from server" (fyi: could NOT find that program here, linksys seemed to reorganized there FTP and left out tftp.exe out)
Using Windows "tftp -i 192.168.1.1 code.bin" always returns a "Timeout" within secounds.
Using OSX "tftp 192.168.1.1 \ binary \ rexmt 1 \ timeout 60 \ trace \ put /Users/djbloo/code.bin" always returns "sent WRQ <file=/User/djbloo/code.bin, mode=octet>"
Using DrayTek Firmware Upgrader on Windows closes after Sent button pressed
Using DrayTek Firmware Upgrader on OSX returns "No response"
Is there something im missing? Am I completly screwed?

Try to hard reset your for 1 minute(not 30 seconds) and see if that gives you a steady power light...
Press and hold the reset button for 1 minute...Release the reset button...Unplug the power cable from your router, wait for 1 minute and re-connect the power cable...Now re-configure your router...
Also make sure that your computer is set to obtain IP automatically, disable any firewalls, security softwares on the computer before trying to access the setup page...
If pinging the router works(either with a static ip or automatically) then try to access your router set-up and configure it manually...

New features under notification bar after update

After I received an update there were some new features on the phone under the notification drop down like an auto rotation button and mobile data button, what do these do?

The auto-rotation allows you to control if applications can rotate 90 degrees to landscape mode.
The mobile data allows you to turn off or on the 3G mobile network. You can still make phone calls, but you won't be able to connect with the 3G EDVO network. It is helpful if you are in a bad 3G location or want to save the battery.
I would sometimes turn off the mobile data at night so emails and other data sent messages would not disturb me and still allowed phone calls to ring.

Imac wont get past white startup screen after updating today

Downloaded new updates today for lion from software updates from Apple menu. Computer restarted and sat on white screen for a long time. 20 mins or so. Seems somewhere after 20 mins we had a power failuer and everything went out. Tried to restart my iMac after power was back on and it just hangs on white screen with apple and gear rotating for over 40 minutes. Nothing seems to work.

A flashing question mark or globe appears when you start your Mac
Reinstall Lion, Mountain Lion, or Mavericks without erasing drive
Boot to the Recovery HD:
Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Repair
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported then click on the Repair Permissions button. When the process is completed, then quit DU and return to the main menu.
Reinstall Lion, Mountain Lion, or Mavericks
OS X Mavericks- Reinstall OS X
OS X Mountain Lion- Reinstall OS X
OS X Lion- Reinstall Mac OS X
Note: You will need an active Internet connection. I suggest using Ethernet
if possible because it is three times faster than wireless.

Push notification fails after update

After the latest update my push notifications fail to work, which is very annoying.
Anyone encountered the same problem and knows a solution?

Just a suggestion, because this was how I ended up fixing mine:
You need to go to Spotlight > Activity Monitor > Search "Notification" > Press Quit
It reboots the notificaton center. If you want it, there's also a youtube video that's only 19 seconds that shows it: http://www.youtube.com/watch?feature=player_embedded&v=UeXx42iGUs4

Update notification remains after update installed. How to I get rid of the notification?

I installed the iPhoto update 9.4.1 but the update notification remains. I've checked iPhoto and it is definitely showing that 9.4.1 is installed.
How do I get rid of the unwanted notification?
iMac, Mac OS X (10.6.5)

Try deleting the cache, cookies, and preference files associated wtih the App Store then restart your Mac.
Quit the App Store if it's open.
Now open the Finder. From the Finder menu bar click Go > Go to Folder
Type or copy/paste:    ~/LIbrary/Caches/com.apple.appstore
Click Go then move the Cache.db file from the com.apple.appstore folder to the Trash.
Type or copy/paste:    ~/Library/Cookies
Click Go then move the com.apple.appstore.plist file from the Cookies folder to the Trash.
Type or copy/paste:    ~/Library/Preferences
Click Go then move the com.apple.appstore.plist file from the Preferences folder to the Trash.
See if that made a difference ...

Q10 SMS Notification failed after update 10.2.1.3062

Hi, I performed a small 31MB update to 10.2.1.3062 on Fido (Rogers). SMS notifications stopped - no LED, audible, Vibrate or spark. Other notifications are fine, performed battery pulls, hub reboots, no luck. SMS shows up in the hub with no notification.

Sad but not surprised to hear of yet more problems with Blackberry software, which is hopeless - the only time I tried to install an update as invited - on the phone - it messed my screen up, which led to my having to have it set back to factory condition. That meant of course that all my 900-odd contacts (I am a TV journalist) were erased. They were of course backed up on my PC - but on restoring my contacts, Link messed them up, putting phone numbers under the wrong name, storing some numbers as many as 5 times, and even deleting whole contact files. Once it also corrupted the backup (I have had to do this 5 times now, because of other faults - notably keyboard failure.) So I uninstalled Link as being dangerous and unstable, and now simply share files one by one (but the system won't share BB10>Outlook Calendar, though it will do Outlook>BB10 Calendar. Bizarre.) The solution is clear: don't touch Blackberry's software with a bargepole - especially as they make no serious offer to help with any problems, unless you pay them - pay them, in other words, for their failures. Roll on my upgrade, and adieu Blackberry. A pity in a way as some parts of the phone (e.g. the browser) seem to work pretty well. The key thing is - don't let the 10 series anywhere near backup data you value.
PS: My BB10 also corrupts contacts internally, but this vandalism seems to be occasional, not wholesale as with Link. Fingers crossed, mind you...

Software update notification - even after updating

I updated my Z10 with v 10.1.0.4181 two days ago using BB Link, but I am still getting the software update notification in the hub, telling me to update to the same version that I have already updated using BB Link. Doesn't the BB servers check for version information before spamming me with notifications? Did this with the previous version as well.
As per the usual forum requests with any kind of query:
1) Yes, I took the battery out and put it back
2) I did 2 backflips while holding the blackberry
3) I turned round-and-round to the point of dizzyness with the blackberry in my pocket
Issue still present.
I've been complaining about this issue since I got the Z10 a few months ago. For the love of God, can someone PLEASE send this issue to the BB10 developers instead of telling us to reset our battery and other unrelated "fixes". Thank you.

Phoeniyx wrote:
I updated my Z10 with v 10.1.0.4181 two days ago using BB Link, but I am still getting the software update notification in the hub, telling me to update to the same version that I have already updated using BB Link. Doesn't the BB servers check for version information before spamming me with notifications? Did this with the previous version as well.
As per the usual forum requests with any kind of query:
1) Yes, I took the battery out and put it back
2) I did 2 backflips while holding the blackberry
3) I turned round-and-round to the point of dizzyness with the blackberry in my pocket
Issue still present.
I've been complaining about this issue since I got the Z10 a few months ago. For the love of God, can someone PLEASE send this issue to the BB10 developers instead of telling us to reset our battery and other unrelated "fixes". Thank you.
Have deleted any of the pre-install program from the phone, if you did it will tell you that you an update available
Also it could an update for some carrier specific program that it wants to update, or it could be a few OS files that are specific to your carrier that need to be updated (like the radio files)
Using the Playbook and the Z10 and the Z30 and loving them
Martin

My Razr HD will no longer play notification sounds after updating with 4.4.2, it also doesn't use the ringtone that I have selected.

I've tried setting different ringtones, and notification sounds, but it still doesn't work. Any other ideas?

Thanks for confirming CasMcc. Are you stating the notifications are working now? What specific notifications are you having difficulties with? You said calls, messages and media are now working. If something changed it would have to be on the device itself. This issue would not be account related.
JonathanK_VZW
VZWSupport
Follow Us on Twitter@VZWSupport

Requery form data block is empty after updating notification attributes

Hello,
we build a form to approve/reject open WF notifications.
The form data block is based on wf_notifications,
wf_local_user_roles, wf_notification_attributes and wf_comments and some additional PSB tables.
We use the following API's to perform the update:
wf_notification.SetAttrText( nid => l_notification_id
, aname => 'RESULT'
, avalue => l_result);
wf_notification.respond(nid => l_notification_id
,responder => name_in('FORM_GLOBALS.USER_NAME')
,respond_comment => name_in('FORM_GLOBALS.REDEN_AFWIJZING') );
First the query shows 3 notifications and after updating one notification as shown above a requery is performed on the datablock and no records are shown anymore.
If I remove the code wf_notification.SetAttrText then the 2 remaining notifications are shown.
It looks like the wf_notification.SetAttrText is conflicting with my view.
This is my view:
     SELECT distinct 'B'||pbr.budget_revision_id mutatienummer
, pbr.budget_revision_id
, xp.dienst
, pbr.justification mutatiereden
, pbr.requestor aanvrager_id
, nvl(fu_req.DESCRIPTION, fu_req.USER_NAME) aanvrager
, pbr.CREATION_DATE aanvraag_datum
, wlur.USER_ORIG_SYSTEM_ID user_id
, wlur.user_name user_name
, wn.notification_id notification_id
, wn.subject subject
, wn.message_type wf_item_type
, pbr.ATTRIBUTE2 transactiesoort
, pbr.ATTRIBUTE4 categorie
, pbr.ATTRIBUTE5 raadsvoorstel
, SUBSTR(pbr.attribute1, 4) begrotingsstuk
, SUBSTR(pbr.attribute3, 4) status
, SUBSTR(pbr.attribute6, 4) dienstgroep
, SUBSTR(pbr.attribute7, 4) concerngroep
, decode(SUBSTR(pbr.attribute3, 4),'Bij D.C.',null,nvl(fu_from.DESCRIPTION, fu_from.USER_NAME)) Fiatteur_bij_DC
, decode(nvl(pbr.attribute9,'X'),nvl(pbr.attribute10,'Z'),'J','N') initiele_structuur_wijz
, decode(pbr.ATTRIBUTE2,'Structuurwijziging','J','N') structuurwijziging
     , pbr.budget_group_id budget_group_id
     , xrb.bedrijf aangevraagd_door_dienst
     , wn.begin_date datum_melding
     , pbr.attribute8 te_wijzigen_kst_dr_prod
     , pbr.attribute9 oude_structuur
     , pbr.attribute10 nieuwe_structuur
     , pbr.attribute11 ingangsjaar_struct_wijz
     , to_date(fnd_date.canonical_to_date(pbr.attribute12)) ingangsdatum_struct_wijz
     , pbr.attribute13 looptijd_mutatie
from wf_notifications wn
, wf_local_user_roles wlur
, wf_notification_attributes wna
, psb_budget_revisions pbr
, fnd_user fu_req
, fnd_user fu_from
, wf_comments wc
, psb_budget_revision_lines pbl
, psb_budget_revision_accounts pbra
, gl_code_combinations gcc
, xxpsb_parameters_vw xp
, psb_budget_group_resp bgr
     , xxpsb_respons_bedrijf_vw xrb
where wn.message_type = 'PSBBR'
and wn.message_name = 'NOTIFY_APPROVERS_OF_SUBMISSION'
and wn.status = 'OPEN'
and wlur.role_name = wn.recipient_role
and wna.notification_id = wn.notification_id
and wna.NAME = 'BUDGET_REVISION_ID'
and pbr.BUDGET_REVISION_ID = to_number(wna.number_value)
and wlur.USER_NAME = fnd_profile.value('USERNAME')
and fu_req.user_id = pbr.requestor
and fu_from.user_name(+) = wc.from_user
and wc.notification_id(+) = wn.notification_id
and pbr.budget_revision_id = pbl.budget_revision_id
and pbl.budget_revision_acct_line_id = pbra.budget_revision_acct_line_id
and pbra.code_combination_id = gcc.code_combination_id
and gcc.segment1 like xp.code||'%'
and bgr.budget_group_id = pbr.budget_group_id
and bgr.responsibility_id(+) = xrb.responsibility_id
and bgr.responsibility_type = 'R'

Hi Mat,
the attribute is only set for those notifications which are selected in the form.
l_notification_id is filled with the notification_id of the selected record.
This is the piece of code within the process loop:
l_notification_id := name_in('WERKLIJST.NOTIFICATION_ID');
l_result := name_in('FORM_GLOBALS.NOTIFICATION_ACTION');
wf_notification.SetAttrText( nid => l_notification_id
, aname => 'RESULT'
, avalue => l_result);
wf_notification.respond(nid => l_notification_id
,responder => name_in('FORM_GLOBALS.USER_NAME')
,respond_comment => name_in('FORM_GLOBALS.REDEN_AFWIJZING')
Regards
Rinus

Facebook and Twitter tap to post gone after updating to ios 7

Hey guys,
I noticed that the tap to post widget has gone from the notification center after updating to iOS 7. Anyone else noticed this? And if so, will it be available in the future?

You're not alone, I'm missing them too. It's a shame, I used the share widget to update my Facebook status more frequently than I used the Facebook app. I'm hoping it's just a burried setting somewhere that I'm missing.

After updating to 4.4.2 the notification light does not change colors. How do I fix this?

After updating to 4.4.2 the notification light does not change colors. It only blinks one color. How do I fix it?

Hello Saralynn43. Getting new updates is always fun, but then there are certain changes that can take some getting used to! This may be one of these cases where there may have been a change done to the notification system. What are the notifications that have been affected with the color change? Let us know as we'd like to look into this for you. Thank you.
NicandroN_VZW
Follow us on twitter @VZWSupport

How come after updating my phone, my notification bar will not scroll down?

Hello.. After updating my iphone 4 to the iOS7, my notification bar stopped working.. I would restart my phone and it would work again, but then again it would go back to not working! Is there anyway that can be fixed?

Not sure why it would stop working like that...you said you restarted...did you do a soft reset on the phone or just turn it off and back on?
Try pressing and holding the home button and then press and hold the lock button (top of the phone) and wait about 10-12 seconds until the white Apple logo appears.
This will do a soft reset on the device (but you will not lose anything). See if that resolves the issue.

Light Flow / Accessibility Problems After Update ..

OK Light Flow problem after update.... the problem is my Talk Back in Accessibility keeps turning on after i restart my phone i know it should not do that it only dose it when i have Light Flow - LED & Notification installed and Tturned on in Accessibility ..... i use Light Flow - LED & Notification to control my LED Notification becuse i hate the built in feature that came with the phone the default management keep the LED to dim hard to see ........ i have used the app ever scene i got the phone and never had a problem tell this crappy update JZO54K.I535VRBLMD3 / I535VRBLMD3 came out i also believe the update JZO54K.I535VRBLMD3 / I535VRBLMD3 that was pushed out made the Accessibility option bad / and everything else
The phone is new
i have hard factory reset it / battery pulled
it did it with old phone but did not do it before that update was pushed
i also got a (NEW) NOT REFURBED phone trying to solve the poor 4G LTE signal /battery life
and over all phone performance with no luck that update was a bad one and needs to be addressed
PLEASE FIX THE PROBLEM >>>>> VERIZON SAMSUNG GOOGLE ( PLEASE )

yep, I had that same problem too, but found a work around. First I tried disabling the accessibility options (but that was no good, I like the light flow notifications). I read from the app (see bottom of opening screen):
I found the work around to be just getting a folder app from the play store - the only talking it was doing was "opening folder" "closing folder" (annoying as he!!)
See the second screen for what that says as far as options. My opinion - just get the folder app, it's easier.

White notification light after update

Similar Messages

Maybe you are looking for