White or Blank Screen Randomly Throughout Modules

Good Afternoon,
We have an ongoing issue with white screens in captivate that appear randomly throughout testing once we load the training to our website.  See Screenshot:
http://euniversity.palmettohealth.org/whitespace/
The files are loaded to our website and all files are included from the .zip files.  Would this have to do with the preloader (although the trainings load fine in the beginning), bandwith, flash?
Thank you so much

- Are you facing the same issue when you publish the files locally?
- Can you share the website address so that we can check the issue at our end.
thanks

Similar Messages

  • White completely Blank screen

    Ok, so I have had my iPod since xmas, worked a dream til this afternoon. The screen just went white. I could hear the click of the dial, I could even choose and play music (though obviously couldnt see what I was choosing). I got home and thought ok maybe because it hasnt been connected to iTunes for a while its freaked out. So I connect to iTunes and it says an update is available, I download that, and it installs...still a white screen. So I think ok, lets try doing the old 'hold down menu and ok key', it turns off it beeps, it turns on it beeps....still nothing. So I then try to restore factory settings. Again nothing....what the heck am I supposed to do with it?! It was my xmas present and it wasnt from the apple store so no receipt etc. Any suggestion (I tried even putting it in the freezer as someone else suggested pmsl)

    firstly sorry for my english i'm better in polish or french-i hope you will "know" what i want to write.
    so... i found solution. I had same problem (two times). I think the problem is hot - i mean temeprature...(ipod need to work 0-35 C so when i had it in pocked temp was 36,6 or even more) soo when lcd is hot it's white... when i made ipod "off" and i put it on cold place for some time then i made it "on" ipod started to work normaly! dont worry if you will have an efect of "rainbow" on lcd (i mean screen not white but in all colours of rainbow;) ) too... it means that tempreture is still to high. So you should wait with "on" i hope all will be allright!

  • Showing white blank screen, showing white blank screen

    hi
    my ipod is showing white and blank screen and how to restar it again

    Try:
    - iOS: Not responding or does not turn on
    - If not successful and you can't fully turn the iPod fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - If still not successful that indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.

  • Blank Screen in Message Window of Solution Manager SPS 13

    Hi Gurus,
    We have SolMan SPS 13 and we have very strang Issue at the ABAP side : The Message Windows ( Most of them ) appears as just plain white Blank Screen i.e. there's a header in the message window but, no msg text as the entire window is pure white i.e. Totally Blank. So, the User ( in Client 000 ) can't read the Messages at all and can not decide which button to click in the Window ?
    I checked on the SMP and have no mention of this weird issue - This seems Graphics Related Problem in Client 000.
    Even the Solution_Manager and DSWP TCode also has entire screen as Blank ..can't use these TCode and Practically
    SolMan is Useless.
    Also, Can we configure the SolMan for Local SLD in Production ( non 000) client ? Or 000 Client is MUST for this ?
    Was / Is anybody in the Same boat ? Any Suggestions To solve this ?
    Sincerely appreciate any / all input on these 2 Issues.
    Thanks,
    Best Regards,
    - Ishan

    No Problem ..! 
    About the SPRO Config > The issue is two fold :
    #1 Client has done Config of  SolMan / Satellite Sysetms but have no documentation of  who did what ( and based on
         which SAP Guide / Resources !!)
    #2 Even the SPRO Screen has white out - Blank - screen when I go for Config for SolMan
         ( under the Window 'Preparation for the Configuration of SAP Solution Manager ) , I see again only white screen.
    So, I believe unless and untill we run the SGEN ( once we have space for it !!! ) , then I can have this Blank Screen Err Solved and I can move on from there to Profile Parameter Check as well !!
    Thanks a Lot Again..
    Best Regards,
    - IShan

  • Equium P200D-139 suddenly goes to blank screen and has to be rebooted

    Hallo,
    Have a Toshiba laptop: Equium P200D-139. Just reinstalled vista (because laptop was glitchy and slow) and computer has just started going to a blank screen randomly, no error reports..nothing.
    Works fine after it has been rebooted, have restored in safe mode, uninstalled updates....but have run put of ideas.
    Would appreciate some help, thanks.

    Hmmm. my notebooks screen was blank sometimes after wakeup from sleep mode.
    But after new reboot everything was OK.
    I searched a little bit in the forum and found some people who have recommended a BIOS and display driver update.
    I did this and could solve my issue
    I, not quite sure if this would be helpful but try this too
    Its worth a try

  • Blank screen after software upgrade

    My iMac downloaded a software update yesterday and restarted automatically. But when it rebooted, I have a white/grey blank screen and the system dies not boot up. After a while, I did a hard shutdown. I let it sit a while, and when I restarted it, I have same thing!! Any ideas?!? Please help!!

    I think I found the problem. When I went to apple support to check and see if I could get technical support, an option came up with options, and this was one of them. They said it could be an external device causing the blank screen. They said to unplug all other external devices and then to reboot again to see if that fixed the problem. It worked. I have been having issues with my Western Digital external drive, and I think that was it. I am returning the drive for an exchange and I hope that this issue will not happen again. Thanks again for your help!

  • CRASH REPORT  Product:  Adobe Photoshop CC  Application running on:  Apple iMac 3.5GHz / Mavericks 10.9.2  Application crashes without warning. .  Symptom:  Drop down boxes go blank white  (I shot screen captures of blank drop down boxes) and application

    CRASH REPORT
    Product:  Adobe Photoshop CC
    Application running on:
    Apple iMac 3.5GHz late 2013 / Mavericks 10.9.2
    Application crashes without warning.  Symptom:  Drop down boxes go blank white  (I shot screen captures of blank drop down boxes) and application stops working, actions for appox. 10 minutes preceding crash are lost. Force Quit  required to quit unresponsive / frozen  application and then Restart of  Adobe Photoshop CC
    Crash Frequency:  Three time in this work day, 5.6.14  Once a day sporadically (approximately 10 times) in past two weeks.
    Other applications running at time of crashes:  Adobe Bridge - NOT effected.  Computer was on line with no browsers open.
    Otherwise computer continued to operate normally.
    I have been using Adobe Photoshop CC for approximately two months.

    Thanks, Chris,
    I hope that this is the solution.
    re:  "And a crash report without an actual crash report (a long, detailed text document available from the crash report dialog), is not all that useful" :
    I did in deed submit a homemade crash report.
    I would have submitted "an actual Crash Report "  and sooner, but:  When this event occurs. there are NO dialog boxes.  All frozen / blank.  No possibility of "actual crash report" !
    Thank you!

  • IPOD Help~(cannot view anything except a white blank screen)

    Alright...I never expected to post up something in this discussion thread this soon...since I got my 30gig iPOD just three days ago...and curious as I am to things...I think I broke it, hah~
    Anyways...I need some help.
    Here's the story.
    I was updating my iPOD to a newer version, I'm assuming...and during the updating process...I accidently 'x'ed out of the box...and now my iPOD screen does not show anything except for a white blank screen. If I hold down the menu and center button for six seconds...It shuts down...but when I release/let go of the buttons...it makes a ring sound and goes back to the white blank screen.
    And also...when I go to the start menu and look under the iPOD folder...it has an update your ipod thing...I clicked it...and it pops up with a screen, saying stuff like it's 'initializing'...and tells me to plug in my iPOD with the usb chord...but I get a message saying 'can't mount iPOD' or 'internal error'
    I think I've tried anything there is to solve this problem...like the five R's...etc.
    I do not want to think that I broke my iPOD already. So if anyone knows, please reply back.
    Thanks in Advance

    Hi Sky,
    Hmm - I see the shapes, I'm not sure why they're disappearing when you draw them - too simple of a file to point at some other issue. It seems like something with the installation went wrong or is missing (the player that renders the Stage for AS3 documents). I think the first thing will be to get the update. Can you try downloading from this page instead of through the update manager? http://www.adobe.com/support/flash/downloads.html Then try running the executable that you download.  If this doesn't fix it, Flash may need to be fully removed and reinstalled.
    Jen.

  • My iphone 5 suddenly has a white blank screen,  no liquid contact or history of fall, what can i do with this problem?

    my iphone 5 suddenly has a white blank screen,  no liquid contact or history of fall, what can i do with this problem?

    Hey there Galileo,
    It sounds like your iPhone screen is solid white and you cannot do anything with it. Take a look at these steps from the following article about that kind of issue:
    Get help with the screen on your iPhone, iPad, or iPod touch
    If you see a solid color screen (black, white or blue)
    Plug in your device to a power source. If you see the low-battery screen when you plug in, let your device charge for at least 10 minutes (20 minutes for iPad) before using it.
    Reset your device while it's plugged in.
    If resetting doesn’t fix the issue, restore your device.
    If you still see the issue after you restore, contact Apple Support.
    Thank you for using Apple Support Communities.
    Regards,
    Sterling

  • E 72 crash and stuck on white blank screen

    i just saved mms settings and rebooted my E 72 and then it would not start. it gets stuck on a white blank screen. what to do?

    Try doing the following as well:
    1.. *#7780# - Restore factory settings - resets all the settings to the default ( you will not lose any data)
     - Make sure you back up your data first as you will lose all of it when you perform. The default code for ALL operations listed here is 12345.
    2.*#7370# - Reformat your phone. ALL data may be lost. still it is a good idea to always do a back up of your stuff.
    This you perform as a last resort. Nothing else is working.If the phone is not showing any activity, proceed with hard formatting , turn off your phone, hold the following buttons while pressing the power button. (the default code is 12345)
    3. hard reset - hold the following buttons * (star key), 3 (number button) and talk/green key. turn on the phone and do not release those buttons until you see the Nokia boot up screen. once you feel the phone power up you can let go off the power button while still holding all three buttons.
    If these codes are not working the only thing for you to do is contact your Nokia Care Center/Service for assistance.

  • Help I just get stuck with the blank screen and the white circle

    help I just get stuck with the blank screen and the white circle after i erase all content and setting
    i dont know how to do pls help.

    Try connecting the device to your iTunes library and restoring it.  If necessary place the iPod into recovery mode using the instructions in this Apple support document.
    iOS: Unable to update or restore
    B-rock

  • Random blank screen in SRM 7.0 with IE 10 punching out to catalog

    Hi -
    After 4 days of insane hours testing, we're running into a complete brick wall with SRM 7.0 and IE 10.  We have a Punchout Catalog that loads the initial page, but the second the page is submitted to go to the second page inside the catalog, the page throws a blank white screen and you can't continue.
    We've more or less ripped the catalog down to bare bones to see if we can get it to submit a form, which we have a couple of times, but then we've had the same code fail other times.
    Its worth noting the following:
    1) SSL is turned on.
    2) we currently use this catalog in production with IE7/8 without any problems.
    3) the catalog is deployed hundreds of times around the world and this is the ONLY instance where anything of the sort is happening.
    4) if you reference the same catalog outside of SAP, with the same browser, it works flawlessly.
    I'm at a loss.  Please...anybody...help?

    I'm adding additional information here guys.  I made a more complete post elsewhere.  Here it is:
    Hi -
    One of our customers has been standardized on IE8 for punching out to our catalog.   They want to move to IE10, but we're having really bizarre issues during the testing phase.  As a prereq, please note that the way this solution works is that they start their session inside SAP, punchout to our e-catalog, but the site retains a "frameset" (a traditional frameset...not iframes/ajax div etc) with the top frame being a way to return to the SAP system, and the bottom frame being the catalog.  The bottom frame is encoded and we don't really have any way to know if its manipulating our catalog code, or what.
    ISSUE: In IE8, there are no issues with the system.  They use our shopping cart, add things to the cart, go to the review cart on the next page, and punch the data back into SAP.  In IE10, it blank screens on the second page, almost like a custom SAP 404 error - just completely blank...when you view source, it IS a 404 "this page cannot be displayed", but the URL that is given is for the internal SAP system, rather than our catalog (which it SHOULD be trying to look for a page on our catalog rather than an internal SAP page.  So its more or less like it doesn't like something on our catalog page, environment, whatever...and then redirects to a internal SAP page that doesn't exist/isn't working correctly).  Every time anything is clicked on the page (form submission, link, etc) that has to refresh the entire page/frame, the system white screens.  We are using iframes (yes, I know .  Ajax issues with IE8 was the driver there, IE8 was a requirement for our customer due to SAP...) to submit certain datapoints on the page, and we don't have any problem submitting to the iframe.  The second you submit to the whole page (or frame, I guess, if you want to look at it that way), white screen/404 issue.
    FACTORS:
    • It works fine in IE8.  It also works perfectly in IE10 OUTSIDE of the frameset SAP is generating.  Even inside of the customers secure environment.  The second SAP gets involved, the issue occurs.  We've never seen this issue with any other deployment of anything, anywhere...other ERPs, other browsers, etc.
    • SSL:  We managed to get the testers to get past the first page by turning off SSL, but they had to work their way outside of the traditional security in SAP as well so I'm not sure if this has any relevance at all.  But SSL compatibility with SAP or frameset as it pertains to IE10 was a thought process.
    • It doesn't seem to be a form submission issue.  We initially thought it might have something to do with the way IE10 interprets frame ID as we were submitting to _self, etc, but turns out traditional links don't work either with no sort of target information.
    • It's definitely on the page load itself, not on the submission of form data to the page, when the white screen happens.  We noticed that half of the page would load for a split second before it white screened.  Initially we thought it was based on something that was being sent, but its definitely past any header submissions or form posts.
    • We pretty much broke apart the entirety of the code and weeded out all kinds of factors and tested them independently and in different combinations...so extensively that I'm almost positive it isn't a traditional coding issue. The result pages ("second page") we set for the tests had almost no content at all...all of which is traditional HTML that has been supported by every browser since the dark ages.  We could not find any true consistent patterns.  Sometimes the user could make it to the second page, other times not (only on the tests, never on the actual catalog), but usually it was the same for all test scenarios (so if we had 9 test scenarios, they'd all fail, or they'd all succeed).
    Conclusions thus far:
    • We're almost positive it isn't code related. However, it could absolutely be caching related?  Although we have the user clearing caching almost every page test, I'm not sure if that clears everything like page load over SSL or something of that nature?
    • Clearly there is some major difference between IE10 and IE8 and how they interpret the same environment.  This might (probably is) just be a SAP issue.  Could it be our SSL type?  What is interpreted differently in those scenarios between the two browsers inside the same SAP wrapper?
    Anything else you can think of would be greatly helpful.  We've been testing for countless hours....we have a really technically advanced team...really can't catch a break on this one or find any consistencies. If SAP wasn't a factor, we'd have this solved in 15 minutes.  I'm not really sure what else to explore since the SAP environment is in play.  Thanks for your help!

  • All I can see is a blank screen and random black boxes - help!

    Think it has updated recently but not 100% sure...
    Every time I try to open firefox I get a blank screen! If I click on the screen I get random black boxes but I can't even see the toolbars! (Just the close, mini and maximise at the top rhs).
    Actually re downloaded and installed but it is the same ....
    Ran malwarebytes and it found some spyware which I have removed...
    Running Avast antivirus on Windows 7 Home...
    Can't think of what else but HELP ...having to use IE to post this and hating every second...
    See someone else had the same problem but solved it themselves...but someone else did too
    Sorry if this is a duplicate question - finding it hard to search etc in IE

    I've done that and it worked - thanks!
    (Bit worried about the security warnings about using older versions though but at least now I can try and find a better solution!)

  • In iphone 4 ios6.1 apps are not updated the white blank screen is coming

    Hi team,,
    I am using iphne 4 ios6.1, but i am not able to apps.. when i got to the aApps option and click the white blank screen is coming
    Plz suggest
    Regards,
    luv Sharma

    I do not think that is possible in SSRS, if you are lucky someone from  the MS  will jump in and provide a solution if exists one.
    Best Regards,Uri Dimant SQL Server MVP,
    http://sqlblog.com/blogs/uri_dimant/
    MS SQL optimization: MS SQL Development and Optimization
    MS SQL Consulting:
    Large scale of database and data cleansing
    Remote DBA Services:
    Improves MS SQL Database Performance
    SQL Server Integration Services:
    Business Intelligence

  • Hi, a dvd got stuck in my mac mini and after looking at solutions online and attempting some not only has the dvd not ejected but my mac wont turn on properly, there is simply a white blank screen, can anyone help me please? thanks

    Hi, a dvd got stuck in my mac mini and after looking at solutions online and attempting some not only has the dvd not ejected but my mac wont turn on properly, there is simply a white blank screen, can anyone help me please? thanks

    Hi Claire, sounds dire, but some things to try...
    Have you done a PRAM reset, CMD+Option+p+r...
    http://support.apple.com/kb/HT1379
    In fact, do 3 in a row, takes a bit of time.
    Intel-based Macs: Resetting the System Management Controller (SMC)...
    http://support.apple.com/kb/HT3964

Maybe you are looking for