White screen after forced reload (used to fix previous white screen issue)

Last Friday after doing a battery pull to clear a stuck Facebook notification, upon reboot my Curve 8520's screen faded to white. I immediately did another battery pull, but then the same thing happened again. It did not return to normal until I plugged it into my wall charger.
I called my carrier, Rogers, about the issue and they sent me instructions to do a forced reload. I didn't have my USB cable until today, so I followed all the instructions for the forced reload this morning. After it went through and re-installed the software, I did a restore using the Desktop Manager. I'd been slowly working through re-installing all my applications when it froze up, so I did a battery pull. It did the "white screen of death" again after the reboot. Now it's just happening at random (ie. while waiting for a website to load), but still gets fixed temporarily if I plug it into the charger.
Is there anything else I can try to fix this? I can't exactly carry my wall charger around everywhere just in case this happens.
Another note: I'm nearly 2 years into my 3-year contract and am upset that this device isn't living up to the term. I can't afford a new phone and I don't want to get locked into another 3 years

So it's just happened again, this time without the battery pull. I was downloading the Toronto Maple Leafs app from mapleleafs.mobi, and it was nearly completed when the screen faded to white. This is very frustrating

Similar Messages

Screen stuck on gray, used shift key and my screen appears with MacBook Pro and not the recovery option. Please help

Screen stuck on gray, used shift key and my screen appears with MacBook Pro and not the recovery option. Please help!

Hi ..
Shift key boots into Safe Mode, not Recovery.
This only works on a Mac running v10.7 Lion or later.
Startup your Mac while holding down the Command + R keys. From there you should be able to access the built in utilities to repair the startup disk and restore OS X using OS X Recovery
If you can't boot into Recovery Mode, help here > Mac OS X: Gray screen appears during startup

Safari 6 white screen, excessive force reloads and won't quit-

Safari 6 seems to often freeze and shows the 'force reload' message. Right now, I'm writing this using FF as the tabs are all white screens. I have tried to reload some tabs (9 open) and they are showing exclamation marks in the tab - as if there is no web connection. FF, Chrome, and even the oft forgotten Camino are working perfectly.
I have removed old security certificates as one post suggests. This doesn't do anything discernible…
Safari will not quit now, but is also not showing an app not responding… force quit message in the dock. Safari has just, well… fainted.
Safari 6 is not a well beast. Neither is Lion, but that's another post topic. Does anyone have any medicine for my preferred, but since the 6 version, completely unworkable, unusable browser?
Does anyone know how to post bugs/feedback about it (there appears to be no bug reporter in the app any more - just when it got really buggy!).
Does anyone know why the empty cache is in this strange Develop menu?

You can submit feedback here > Apple - Safari - Feedback
You can empty the cache by clicking Clear History from Safari > Reset Safari
Unfortunately, that also deletes your recent History.
Empty Caches has always been available from the Devleop menu used by web developers.
There are three ways to force quit an app. Command + Option + Esc, or from the Apple menu, or by launching Activity Monitor located in HD > Applications > Utilties.
Try deleting the Cache.db file.
Open the Finder. From the Finder menu bar click Go > Go to Folder
Type this exactly as you see it here: ~/Library/Caches/com.apple.Safari/Cache.db
Click Go then move the Cache.db file to the Trash.
Quit then relaunch Safafari to test.
If you didn't have the same problems with the prior version of Safari, try troubleshooting extensions and plugins.
Go to Safari > Preferences then selct the Extensions tab. If you have any installed, turn that OFF, quit then relaunch Safari to test.
If that didn't make a difference, select the Security tab from the Preferences pane then deselect: Enable-plug ins.
Quit then relaunch Safari to test. If that helped, then follow the instructions for troubleshooting third party add ons here.
edited by: cs

White Screen after start up chime and Apple logo, any common issues/reasons?

Hi all,
I have a 2011 quadcore i7, 4GB RAM MacBook Pro which has recently and suddenly developed this annoying fault. A perminant white screen after the Apple logo and spinwheel. I have removed the hard drive (from my early 2011 MacBook Pro) and did a clean install of Lion (10.7) and I know the harddrive is fine and functional as my Mac Pro is able to boot from it and works perfectly, put the same drive back into the MacBook Pro and same, start up chime - Apple Logo - Flash, screen stays white. So its not Harddrive and most likely not a software problem (as the drive has been whiped and OSX reinstalled.) Any thoughts that it may be a bust motherboard or graphics card?
Already tried:
Safe Boot
Single-user Mode
Verbode Mode
Resetting the NVRAM/PRAM
Wiping and installing OSX
Disc recovery
Internet Recovery
Many thanks in advance

Hi all,
I have a 2011 quadcore i7, 4GB RAM MacBook Pro which has recently and suddenly developed this annoying fault. A perminant white screen after the Apple logo and spinwheel. I have removed the hard drive (from my early 2011 MacBook Pro) and did a clean install of Lion (10.7) and I know the harddrive is fine and functional as my Mac Pro is able to boot from it and works perfectly, put the same drive back into the MacBook Pro and same, start up chime - Apple Logo - Flash, screen stays white. So its not Harddrive and most likely not a software problem (as the drive has been whiped and OSX reinstalled.) Any thoughts that it may be a bust motherboard or graphics card?
Already tried:
Safe Boot
Single-user Mode
Verbode Mode
Resetting the NVRAM/PRAM
Wiping and installing OSX
Disc recovery
Internet Recovery
Many thanks in advance

MacBook all white screen after force quit and restart

Hiya. My good old MacBook froze last night (European time). Lots of things (ID, PS, AI, Fetch, etc) running and Firefox was idling some site not working. Gave it a rest but that only worsened things as I couldn't even skip between programs or let alone force quit Firefox. So I shut the whole thing down using cmd, alt, shift and pwr. After restarting with the reassuring sound of Apple, nothing happened. The screen didn't even turn blue but stayed on whitish grey??? I have reset the pram, done the SMC reset by disconnecting, taking the battery out and pressing pwr for 5 secs. Still same crisis. White screen and always a the start-up sound loud and clear.
Ideas, anybody. Got an Apple Protection Plan
Thanks!

Welcome to Apple Discussions.
Try starting in safe mode by holding the shift key until the grey Apple logo appears. If it starts like this open Disk Utility, select the drive and do a verify disk.
If that shows any errors insert the original installation dvd and restart holding the c key until the grey Apple logo appears. On the 1st installation screen select language & on the next locate DU from the top menu. This time run 'Repair Disk'. If it shows repairs completed rerun it until it shows no errors/repairs necessary. Then restart normally.
Report back with your results.
Neville

White screen after force quit Finder

The message on my MacBook Pro was that disk space needed to be freed up...tried to move files to the trash but just stayed "in progress" for hours...online support suggested a force quit of Finder...after reboot, I only see a white screen of death.
So many pictures that haven't been backed up...help!

Welcome to Apple Discussions.
Try starting in safe mode by holding the shift key until the grey Apple logo appears. If it starts like this open Disk Utility, select the drive and do a verify disk.
If that shows any errors insert the original installation dvd and restart holding the c key until the grey Apple logo appears. On the 1st installation screen select language & on the next locate DU from the top menu. This time run 'Repair Disk'. If it shows repairs completed rerun it until it shows no errors/repairs necessary. Then restart normally.
Report back with your results.
Neville

Blue screen after logout when using Open Directory-bound computers

I'm having a weird problem with the Open Directory-bound computers that I'm managing. I recently deployed it to a lab of 30 computers (after doing initial testing with 1 computer), and I'm having one problem in particular:
Sometimes, when a user logs out of one of these OD-bound computers, the login window fails to appear. The user is logged out, the desktop for that user disappears (being replaced with the standard blue desktop), but the login window doesn't appear.
What's strange is that Remote Desktop says these computers are at the login window, and I can manipulate them via Remote Desktop as if nothing is wrong (I can restart, shut down, etc.). But I can't do anything at the computer locally with the keyboard or mouse -- if I try to bring up the shutdown dialog with Control-Power (which works sometimes in these situations), it doesn't work.
This doesn't happen all the time or with the same computers. But it happens often enough that it's a bit of an annoyance -- I usually just restart them from Remote Desktop to get the login window to appear. (The other problem is that sometimes I'm not around to fix it, and so if people come in when I'm not around, they have to force shutdown the computer using the power button and then start it back up to get to the login window.)
I've also noticed that some of the computers have been taking a lot longer to login, which seems to suggest that the computers are trying to access the server or something, but the server is always up and is usually very reliable (with a few exceptions here and there).
Any ideas?
G4 eMacs Mac OS X (10.4.8)

We are having the same problem with our lab of about 30 eMacs. All are computers bound to and managed by the server. Have you found any solutions yet.
Anybody?

Mavericks freezing with spinning symbol and strange screen after forcing restart

Hi,
My Mac has freezed (or almost that) and showed the spinning symbol (in gray). I couldn't use, so I forced the restart.
After that, I've received a strange screen that I've never seen in my life, with a folder and a "?" inside it:
I noticed that the freeze happened exactly at the same time my Internet connection got lost, because my Apple TV has also stopped (but not freezed).
I've been experiencing problems with Mavericks since the begining ( https://discussions.apple.com/thread/5836640 ), and I'm seriously considering downgranding to ML.
I'll appreciate any help on this. Thank you so much.

Spinning Beach Ball
Spinning Beach ball (2)
Check Activity Monitor for processes hogging CPU/memory.
Activity Monitor - Mavericks
Activity Monitor in Mavericks has significant changes

New macbook pro 2010 gray screen after 10 min use..

macbook pro 2010 freeze.
Hello, i had the new macbook pro, i use whit a 25" HP scren LCD whit the dva TO vga, is imposible to use because the computer goes to green screen every 10 minutes.
i think this is a nvida graphis problem, does anobody have idea o similar failure

I would get it looked at. It sounds like a graphics hardware issue.
Check out the new remodeled MacOSG website! 24-hour Apple-related news & support.
 MacOSG: An Apple User Group  iTunes: MacOSG Podcast  Follow us on Twitter: MacOSG

After wiping phone to sell phone will not turn on, it stays on a black screen with apple logo.after forced reboot, it goes to same exact screen. any ideas?

my brothers girlfriend gave me her old iPhone. the last thing she did to the working phone was to wipe it to erase all her private info. however instad of booting up like normal, all i get is a black screen with apple logo. ive forced a reboot and it goes to same screen. sometimes it will turn off and reboot by itself, and occasionally it wil give a low battery icon, and it will show it charging for a few min then go back to black screen with Appple logo. any ideas anyone?

Try to charge it for about 10min using th adapter, then connect to your computer in recovery mode, explained here: iOS: Unable to restore

When i open the cover of my ipad Air i get the home screen Im sure i used to get the lock screen

I have my iPad Air kept in a third party cover which operates the sleeep/wake function
I have just become aware that when i now open the cover, i get a home screen and not the lock screen
is this something that has changed with the intro of ios 8.1.3
I miss the time and date when i now open the cover

Just had some second thoughts on this
1/ My wife says her iPad2 does the same
2/ I think that if there are any notifications then the Lock screen will appear - will have to try this
3/ If i operate the sleep/wake button manually ( the button at the top RH it works ok
No big problem but something has changed

Screen display looks fuzzy using xf86-video-intel on a HP Pavilion 23

Hello,
First off I want to say, thank you for Arch! Been using some distros on and off and I think I found my /home! I made a full plunge into Linux a bit ago after some Windows 8.1 issues, switched to Arch and not looking back. Anyways, So far all my computers are either Arch or Manjaro which I am moving more towards straight arch as Manjaro does have some issues when updating your system (dependency loops). All and all not bad, just liking the full control of a pure system then building from scratch.
Ok, the issue at hand. I have removed Windows 8.1 from my HP All in One Pavilion 23 machine....what a nightmare that was.... Everything was good after turning off secure boot. I installed Arch Linux (3.14.4-1) x86_64, and I am having issues getting the xf86-video-intel driver to play nice with X.
I have taken a screenshot:
Screenshot
I notice this starts right after the choosing the Arch Linux from the boot option menu. It starts the load nice and crisp but after a second the screen flickers with some lines at the top of the screen, random colors, only about the top 3rd of the screen. This modules begin to load but the terminal text looks blocky and horrible.
I am using Openbox 3.5.2-6 with slim 1.3.6-4. Running xorg-server 1.15.1-1 and xorg-server-utils 7.6-3 with all the dependencies of course.
Output from pacman queries for video drivers
xf86-video-intel 2.99.911-2
xf86-video-vesa 2.3.2-4
lspci output
00:00.0 Host bridge: Intel Corporation 4th Gen Core Processor DRAM Controller (rev 06)
00:02.0 VGA compatible controller: Intel Corporation Xeon E3-1200 v3/4th Gen Core Processor Integrated Graphics Controller (rev 06)
00:14.0 USB controller: Intel Corporation 8 Series/C220 Series Chipset Family USB xHCI (rev 05)
00:16.0 Communication controller: Intel Corporation 8 Series/C220 Series Chipset Family MEI Controller #1 (rev 04)
00:1a.0 USB controller: Intel Corporation 8 Series/C220 Series Chipset Family USB EHCI #2 (rev 05)
00:1b.0 Audio device: Intel Corporation 8 Series/C220 Series Chipset High Definition Audio Controller (rev 05)
00:1c.0 PCI bridge: Intel Corporation 8 Series/C220 Series Chipset Family PCI Express Root Port #1 (rev d5)
00:1c.2 PCI bridge: Intel Corporation 8 Series/C220 Series Chipset Family PCI Express Root Port #3 (rev d5)
00:1c.4 PCI bridge: Intel Corporation 8 Series/C220 Series Chipset Family PCI Express Root Port #5 (rev d5)
00:1c.5 PCI bridge: Intel Corporation 8 Series/C220 Series Chipset Family PCI Express Root Port #6 (rev d5)
00:1d.0 USB controller: Intel Corporation 8 Series/C220 Series Chipset Family USB EHCI #1 (rev 05)
00:1f.0 ISA bridge: Intel Corporation H87 Express LPC Controller (rev 05)
00:1f.2 SATA controller: Intel Corporation 8 Series/C220 Series Chipset Family 6-port SATA Controller 1 [AHCI mode] (rev 05)
00:1f.3 SMBus: Intel Corporation 8 Series/C220 Series Chipset Family SMBus Controller (rev 05)
02:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller (rev 0c)
03:00.0 Unassigned class [ff00]: Realtek Semiconductor Co., Ltd. RTS5229 PCI Express Card Reader (rev 01)
04:00.0 Network controller: Qualcomm Atheros AR9485 Wireless Network Adapter (rev 01)
my /etc/mkinitcpio.conf
# vim:set ft=sh
# MODULES
# The following modules are loaded before any boot hooks are
# run. Advanced users may wish to specify all system modules
# in this array. For instance:
# MODULES="piix ide_disk reiserfs"
MODULES="i915"
# BINARIES
# This setting includes any additional binaries a given user may
# wish into the CPIO image. This is run last, so it may be used to
# override the actual binaries included by a given hook
# BINARIES are dependency parsed, so you may safely ignore libraries
BINARIES=""
# FILES
# This setting is similar to BINARIES above, however, files are added
# as-is and are not parsed in any way. This is useful for config files.
FILES=""
# HOOKS
# This is the most important setting in this file. The HOOKS control the
# modules and scripts added to the image, and what happens at boot time.
# Order is important, and it is recommended that you do not change the
# order in which HOOKS are added. Run 'mkinitcpio -H <hook name>' for
# help on a given hook.
# 'base' is _required_ unless you know precisely what you are doing.
# 'udev' is _required_ in order to automatically load modules
# 'filesystems' is _required_ unless you specify your fs modules in MODULES
# Examples:
## This setup specifies all modules in the MODULES setting above.
## No raid, lvm2, or encrypted root is needed.
# HOOKS="base"
## This setup will autodetect all modules for your system and should
## work as a sane default
# HOOKS="base udev autodetect block filesystems"
## This setup will generate a 'full' image which supports most systems.
## No autodetection is done.
# HOOKS="base udev block filesystems"
## This setup assembles a pata mdadm array with an encrypted root FS.
## Note: See 'mkinitcpio -H mdadm' for more information on raid devices.
# HOOKS="base udev block mdadm encrypt filesystems"
## This setup loads an lvm2 volume group on a usb device.
# HOOKS="base udev block lvm2 filesystems"
## NOTE: If you have /usr on a separate partition, you MUST include the
# usr, fsck and shutdown hooks.
HOOKS="base udev autodetect modconf block filesystems keyboard fsck"
# COMPRESSION
# Use this to compress the initramfs image. By default, gzip compression
# is used. Use 'cat' to create an uncompressed image.
#COMPRESSION="gzip"
#COMPRESSION="bzip2"
#COMPRESSION="lzma"
#COMPRESSION="xz"
#COMPRESSION="lzop"
#COMPRESSION="lz4"
# COMPRESSION_OPTIONS
# Additional options for the compressor
#COMPRESSION_OPTIONS=""
,my /etc/default/grub.conf
GRUB_DEFAULT=0
GRUB_TIMEOUT=5
GRUB_DISTRIBUTOR="Arch"
GRUB_CMDLINE_LINUX_DEFAULT="quiet splash"
GRUB_CMDLINE_LINUX=""
# Preload both GPT and MBR modules so that they are not missed
GRUB_PRELOAD_MODULES="part_gpt part_msdos"
# Uncomment to enable Hidden Menu, and optionally hide the timeout count
#GRUB_HIDDEN_TIMEOUT=5
#GRUB_HIDDEN_TIMEOUT_QUIET=true
# Uncomment to use basic console
GRUB_TERMINAL_INPUT=console
# Uncomment to disable graphical terminal
#GRUB_TERMINAL_OUTPUT=console
# The resolution used on graphical terminal
# note that you can use only modes which your graphic card supports via VBE
# you can see them in real GRUB with the command `vbeinfo'
GRUB_GFXMODE=auto
# Uncomment to allow the kernel use the same resolution used by grub
GRUB_GFXPAYLOAD_LINUX=keep
# Uncomment if you want GRUB to pass to the Linux kernel the old parameter
# format "root=/dev/xxx" instead of "root=/dev/disk/by-uuid/xxx"
#GRUB_DISABLE_LINUX_UUID=true
# Uncomment to disable generation of recovery mode menu entries
GRUB_DISABLE_RECOVERY=true
# Uncomment and set to the desired menu colors. Used by normal and wallpaper
# modes only. Entries specified as foreground/background.
#GRUB_COLOR_NORMAL="light-blue/black"
#GRUB_COLOR_HIGHLIGHT="light-cyan/blue"
# Uncomment one of them for the gfx desired, a image background or a gfxtheme
#GRUB_BACKGROUND="/path/to/wallpaper"
#GRUB_THEME="/path/to/gfxtheme"
# Uncomment to get a beep at GRUB start
#GRUB_INIT_TUNE="480 440 1"
#GRUB_SAVEDEFAULT="true"
And last my /var/log/Xorg.0.log
[ 15.641]
X.Org X Server 1.15.1
Release Date: 2014-04-13
[ 15.641] X Protocol Version 11, Revision 0
[ 15.641] Build Operating System: Linux 3.14.0-4-ARCH x86_64
[ 15.641] Current Operating System: Linux localhost 3.14.4-1-ARCH #1 SMP PREEMPT Tue May 13 16:41:39 CEST 2014 x86_64
[ 15.641] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=0c1916a0-b631-478f-ac6b-aa5d123f75cd rw quiet splash
[ 15.641] Build Date: 14 April 2014 08:39:09AM
[ 15.641]
[ 15.641] Current version of pixman: 0.32.4
[ 15.641] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 15.641] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 15.641] (==) Log file: "/var/log/Xorg.0.log", Time: Sun Jun 1 17:05:15 2014
[ 15.687] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 15.687] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 15.739] (==) No Layout section. Using the first Screen section.
[ 15.739] (==) No screen section available. Using defaults.
[ 15.739] (**) |-->Screen "Default Screen Section" (0)
[ 15.739] (**) | |-->Monitor "<default monitor>"
[ 15.764] (==) No device specified for screen "Default Screen Section".
Using the first device section listed.
[ 15.764] (**) | |-->Device "Intel Graphics"
[ 15.764] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 15.764] (==) Automatically adding devices
[ 15.764] (==) Automatically enabling devices
[ 15.764] (==) Automatically adding GPU devices
[ 15.793] (WW) The directory "/usr/share/fonts/Type1/" does not exist.
[ 15.793] Entry deleted from font path.
[ 15.795] (==) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/,
/usr/share/fonts/OTF/,
/usr/share/fonts/100dpi/,
/usr/share/fonts/75dpi/
[ 15.795] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 15.795] (**) Extension "Composite" is enabled
[ 15.795] (**) Extension "RENDER" is enabled
[ 15.795] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 15.795] (II) Loader magic: 0x804c80
[ 15.795] (II) Module ABI versions:
[ 15.795] X.Org ANSI C Emulation: 0.4
[ 15.795] X.Org Video Driver: 15.0
[ 15.795] X.Org XInput driver : 20.0
[ 15.796] X.Org Server Extension : 8.0
[ 15.796] (II) xfree86: Adding drm device (/dev/dri/card0)
[ 15.798] (--) PCI:*(0:0:2:0) 8086:0412:103c:2b0f rev 6, Mem @ 0xf7800000/4194304, 0xe0000000/268435456, I/O @ 0x0000f000/64
[ 15.798] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[ 15.798] Initializing built-in extension Generic Event Extension
[ 15.798] Initializing built-in extension SHAPE
[ 15.798] Initializing built-in extension MIT-SHM
[ 15.798] Initializing built-in extension XInputExtension
[ 15.798] Initializing built-in extension XTEST
[ 15.798] Initializing built-in extension BIG-REQUESTS
[ 15.798] Initializing built-in extension SYNC
[ 15.798] Initializing built-in extension XKEYBOARD
[ 15.798] Initializing built-in extension XC-MISC
[ 15.798] Initializing built-in extension SECURITY
[ 15.798] Initializing built-in extension XINERAMA
[ 15.798] Initializing built-in extension XFIXES
[ 15.798] Initializing built-in extension RENDER
[ 15.799] Initializing built-in extension RANDR
[ 15.799] Initializing built-in extension COMPOSITE
[ 15.799] Initializing built-in extension DAMAGE
[ 15.799] Initializing built-in extension MIT-SCREEN-SAVER
[ 15.799] Initializing built-in extension DOUBLE-BUFFER
[ 15.799] Initializing built-in extension RECORD
[ 15.799] Initializing built-in extension DPMS
[ 15.799] Initializing built-in extension Present
[ 15.799] Initializing built-in extension DRI3
[ 15.799] Initializing built-in extension X-Resource
[ 15.799] Initializing built-in extension XVideo
[ 15.799] Initializing built-in extension XVideo-MotionCompensation
[ 15.799] Initializing built-in extension XFree86-VidModeExtension
[ 15.799] Initializing built-in extension XFree86-DGA
[ 15.799] Initializing built-in extension XFree86-DRI
[ 15.799] Initializing built-in extension DRI2
[ 15.799] (II) "glx" will be loaded by default.
[ 15.799] (II) LoadModule: "dri2"
[ 15.799] (II) Module "dri2" already built-in
[ 15.799] (II) LoadModule: "glamoregl"
[ 15.808] (II) Loading /usr/lib/xorg/modules/libglamoregl.so
[ 15.917] (II) Module glamoregl: vendor="X.Org Foundation"
[ 15.917] compiled for 1.15.0, module version = 0.6.0
[ 15.917] ABI class: X.Org ANSI C Emulation, version 0.4
[ 15.917] (II) LoadModule: "glx"
[ 15.917] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 15.928] (II) Module glx: vendor="X.Org Foundation"
[ 15.929] compiled for 1.15.1, module version = 1.0.0
[ 15.929] ABI class: X.Org Server Extension, version 8.0
[ 15.929] (==) AIGLX enabled
[ 15.929] Loading extension GLX
[ 15.929] (II) LoadModule: "intel"
[ 15.929] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[ 15.955] (II) Module intel: vendor="X.Org Foundation"
[ 15.955] compiled for 1.15.0, module version = 2.99.911
[ 15.955] Module class: X.Org Video Driver
[ 15.955] ABI class: X.Org Video Driver, version 15.0
[ 15.955] (II) intel: Driver for Intel(R) Integrated Graphics Chipsets:
i810, i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G,
915G, E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM,
Pineview G, 965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33,
GM45, 4 Series, G45/G43, Q45/Q43, G41, B43
[ 15.956] (II) intel: Driver for Intel(R) HD Graphics: 2000-5000
[ 15.956] (II) intel: Driver for Intel(R) Iris(TM) Graphics: 5100
[ 15.956] (II) intel: Driver for Intel(R) Iris(TM) Pro Graphics: 5200
[ 15.956] (++) using VT number 7
[ 15.971] (--) intel(0): Integrated Graphics Chipset: Intel(R) HD Graphics 4600
[ 15.971] (--) intel(0): CPU: x86-64, sse2, sse3, ssse3, sse4.1, sse4.2, avx, avx2
[ 15.971] (II) intel(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 15.971] (==) intel(0): Depth 24, (--) framebuffer bpp 32
[ 15.971] (==) intel(0): RGB weight 888
[ 15.971] (==) intel(0): Default visual is TrueColor
[ 15.971] (**) intel(0): Option "AccelMethod" "sna"
[ 15.971] (**) intel(0): Option "DRI" "true"
[ 15.971] (**) intel(0): Option "TearFree" "true"
[ 15.972] (**) intel(0): Framebuffer tiled
[ 15.972] (**) intel(0): Pixmaps tiled
[ 15.972] (**) intel(0): "Tear free" enabled
[ 15.972] (**) intel(0): Forcing per-crtc-pixmaps? no
[ 15.972] (II) intel(0): Output eDP1 has no monitor section
[ 15.972] (--) intel(0): Found backlight control interface acpi_video0 (type 'firmware') for output eDP1
[ 15.972] (II) intel(0): Output VGA1 has no monitor section
[ 15.972] (II) intel(0): Output DP1 has no monitor section
[ 15.972] (II) intel(0): Output HDMI1 has no monitor section
[ 15.972] (II) intel(0): Output DP2 has no monitor section
[ 15.972] (II) intel(0): Output HDMI2 has no monitor section
[ 15.972] (II) intel(0): Output VIRTUAL1 has no monitor section
[ 15.972] (--) intel(0): Output eDP1 using initial mode 1920x1080 on pipe 0
[ 15.972] (==) intel(0): DPI set to (96, 96)
[ 15.972] (II) Loading sub module "dri2"
[ 15.972] (II) LoadModule: "dri2"
[ 15.972] (II) Module "dri2" already built-in
[ 15.972] (==) Depth 24 pixmap format is 32 bpp
[ 15.986] (II) intel(0): SNA initialized with Haswell (gen7.5, gt2) backend
[ 15.986] (==) intel(0): Backing store enabled
[ 15.986] (==) intel(0): Silken mouse enabled
[ 15.986] (II) intel(0): HW Cursor enabled
[ 15.986] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[ 15.987] (==) intel(0): DPMS enabled
[ 15.987] (II) intel(0): [DRI2] Setup complete
[ 15.987] (II) intel(0): [DRI2] DRI driver: i965
[ 15.987] (II) intel(0): [DRI2] VDPAU driver: i965
[ 15.987] (II) intel(0): direct rendering: DRI2 Enabled
[ 15.987] (==) intel(0): hotplug detection: "enabled"
[ 15.987] (--) RandR disabled
[ 16.067] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[ 16.067] (II) AIGLX: enabled GLX_ARB_create_context
[ 16.067] (II) AIGLX: enabled GLX_ARB_create_context_profile
[ 16.067] (II) AIGLX: enabled GLX_EXT_create_context_es2_profile
[ 16.067] (II) AIGLX: enabled GLX_INTEL_swap_event
[ 16.067] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
[ 16.067] (II) AIGLX: enabled GLX_EXT_framebuffer_sRGB
[ 16.067] (II) AIGLX: enabled GLX_ARB_fbconfig_float
[ 16.067] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[ 16.067] (II) AIGLX: enabled GLX_ARB_create_context_robustness
[ 16.067] (II) AIGLX: Loaded and initialized i965
[ 16.067] (II) GLX: Initialized DRI2 GL provider for screen 0
[ 16.085] (II) intel(0): switch to mode [email protected] on eDP1 using pipe 0, position (0, 0), rotation normal, reflection none
[ 16.107] (II) intel(0): Setting screen physical size to 508 x 285
[ 16.375] (II) config/udev: Adding input device Power Button (/dev/input/event1)
[ 16.375] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 16.375] (II) LoadModule: "evdev"
[ 16.383] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 16.402] (II) Module evdev: vendor="X.Org Foundation"
[ 16.402] compiled for 1.15.1, module version = 2.9.0
[ 16.402] Module class: X.Org XInput Driver
[ 16.402] ABI class: X.Org XInput driver, version 20.0
[ 16.402] (II) Using input driver 'evdev' for 'Power Button'
[ 16.402] (**) Power Button: always reports core events
[ 16.402] (**) evdev: Power Button: Device: "/dev/input/event1"
[ 16.402] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 16.402] (--) evdev: Power Button: Found keys
[ 16.402] (II) evdev: Power Button: Configuring as keyboard
[ 16.402] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input1/event1"
[ 16.402] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[ 16.402] (**) Option "xkb_rules" "evdev"
[ 16.402] (**) Option "xkb_model" "pc104"
[ 16.402] (**) Option "xkb_layout" "us"
[ 16.442] (II) config/udev: Adding input device Video Bus (/dev/input/event2)
[ 16.442] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[ 16.442] (II) Using input driver 'evdev' for 'Video Bus'
[ 16.442] (**) Video Bus: always reports core events
[ 16.442] (**) evdev: Video Bus: Device: "/dev/input/event2"
[ 16.442] (--) evdev: Video Bus: Vendor 0 Product 0x6
[ 16.442] (--) evdev: Video Bus: Found keys
[ 16.442] (II) evdev: Video Bus: Configuring as keyboard
[ 16.442] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:01/input/input2/event2"
[ 16.442] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[ 16.442] (**) Option "xkb_rules" "evdev"
[ 16.442] (**) Option "xkb_model" "pc104"
[ 16.442] (**) Option "xkb_layout" "us"
[ 16.443] (II) config/udev: Adding input device Power Button (/dev/input/event0)
[ 16.443] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 16.443] (II) Using input driver 'evdev' for 'Power Button'
[ 16.443] (**) Power Button: always reports core events
[ 16.443] (**) evdev: Power Button: Device: "/dev/input/event0"
[ 16.443] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 16.443] (--) evdev: Power Button: Found keys
[ 16.443] (II) evdev: Power Button: Configuring as keyboard
[ 16.443] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0/event0"
[ 16.443] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 8)
[ 16.443] (**) Option "xkb_rules" "evdev"
[ 16.443] (**) Option "xkb_model" "pc104"
[ 16.443] (**) Option "xkb_layout" "us"
[ 16.444] (II) config/udev: Adding drm device (/dev/dri/card0)
[ 16.444] (II) config/udev: Adding input device HP High Definition 1MP Webcam (/dev/input/event8)
[ 16.444] (**) HP High Definition 1MP Webcam: Applying InputClass "evdev keyboard catchall"
[ 16.444] (II) Using input driver 'evdev' for 'HP High Definition 1MP Webcam'
[ 16.444] (**) HP High Definition 1MP Webcam: always reports core events
[ 16.444] (**) evdev: HP High Definition 1MP Webcam: Device: "/dev/input/event8"
[ 16.444] (--) evdev: HP High Definition 1MP Webcam: Vendor 0x4f2 Product 0xb40b
[ 16.444] (--) evdev: HP High Definition 1MP Webcam: Found keys
[ 16.444] (II) evdev: HP High Definition 1MP Webcam: Configuring as keyboard
[ 16.444] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-5/1-5:1.0/input/input8/event8"
[ 16.444] (II) XINPUT: Adding extended input device "HP High Definition 1MP Webcam" (type: KEYBOARD, id 9)
[ 16.444] (**) Option "xkb_rules" "evdev"
[ 16.444] (**) Option "xkb_model" "pc104"
[ 16.445] (**) Option "xkb_layout" "us"
[ 16.445] (II) config/udev: Adding input device NextWindow Touchscreen (/dev/input/event14)
[ 16.445] (**) NextWindow Touchscreen: Applying InputClass "evdev touchscreen catchall"
[ 16.445] (II) Using input driver 'evdev' for 'NextWindow Touchscreen'
[ 16.445] (**) NextWindow Touchscreen: always reports core events
[ 16.445] (**) evdev: NextWindow Touchscreen: Device: "/dev/input/event14"
[ 16.445] (--) evdev: NextWindow Touchscreen: Vendor 0x1926 Product 0x33e
[ 16.445] (--) evdev: NextWindow Touchscreen: Found absolute axes
[ 16.445] (--) evdev: NextWindow Touchscreen: Found absolute multitouch axes
[ 16.445] (II) evdev: NextWindow Touchscreen: No buttons found, faking one.
[ 16.445] (--) evdev: NextWindow Touchscreen: Found x and y absolute axes
[ 16.445] (--) evdev: NextWindow Touchscreen: Found absolute touchscreen
[ 16.445] (II) evdev: NextWindow Touchscreen: Configuring as touchscreen
[ 16.445] (**) evdev: NextWindow Touchscreen: YAxisMapping: buttons 4 and 5
[ 16.445] (**) evdev: NextWindow Touchscreen: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 16.446] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-7/1-7:1.0/0003:1926:033E.0001/input/input14/event14"
[ 16.446] (II) XINPUT: Adding extended input device "NextWindow Touchscreen" (type: TOUCHSCREEN, id 10)
[ 16.446] (II) evdev: NextWindow Touchscreen: initialized for absolute axes.
[ 16.446] (**) NextWindow Touchscreen: (accel) keeping acceleration scheme 1
[ 16.446] (**) NextWindow Touchscreen: (accel) acceleration profile 0
[ 16.446] (**) NextWindow Touchscreen: (accel) acceleration factor: 2.000
[ 16.446] (**) NextWindow Touchscreen: (accel) acceleration threshold: 4
[ 16.446] (II) config/udev: Adding input device NextWindow Touchscreen (/dev/input/mouse2)
[ 16.446] (II) No input driver specified, ignoring this device.
[ 16.446] (II) This device may have been added with another device file.
[ 16.447] (II) config/udev: Adding input device NextWindow Touchscreen (/dev/input/event9)
[ 16.447] (II) No input driver specified, ignoring this device.
[ 16.447] (II) This device may have been added with another device file.
[ 16.447] (II) config/udev: Adding input device NextWindow Touchscreen (/dev/input/event10)
[ 16.447] (**) NextWindow Touchscreen: Applying InputClass "evdev pointer catchall"
[ 16.447] (II) Using input driver 'evdev' for 'NextWindow Touchscreen'
[ 16.447] (**) NextWindow Touchscreen: always reports core events
[ 16.447] (**) evdev: NextWindow Touchscreen: Device: "/dev/input/event10"
[ 16.447] (--) evdev: NextWindow Touchscreen: Vendor 0x1926 Product 0x33e
[ 16.447] (--) evdev: NextWindow Touchscreen: Found 3 mouse buttons
[ 16.447] (--) evdev: NextWindow Touchscreen: Found absolute axes
[ 16.447] (--) evdev: NextWindow Touchscreen: Found x and y absolute axes
[ 16.447] (--) evdev: NextWindow Touchscreen: Found absolute touchscreen
[ 16.447] (II) evdev: NextWindow Touchscreen: Configuring as touchscreen
[ 16.447] (**) evdev: NextWindow Touchscreen: YAxisMapping: buttons 4 and 5
[ 16.447] (**) evdev: NextWindow Touchscreen: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 16.448] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-7/1-7:1.2/0003:1926:033E.0003/input/input10/event10"
[ 16.448] (II) XINPUT: Adding extended input device "NextWindow Touchscreen" (type: TOUCHSCREEN, id 11)
[ 16.448] (II) evdev: NextWindow Touchscreen: initialized for absolute axes.
[ 16.448] (**) NextWindow Touchscreen: (accel) keeping acceleration scheme 1
[ 16.448] (**) NextWindow Touchscreen: (accel) acceleration profile 0
[ 16.448] (**) NextWindow Touchscreen: (accel) acceleration factor: 2.000
[ 16.448] (**) NextWindow Touchscreen: (accel) acceleration threshold: 4
[ 16.448] (II) config/udev: Adding input device NextWindow Touchscreen (/dev/input/js0)
[ 16.448] (II) No input driver specified, ignoring this device.
[ 16.448] (II) This device may have been added with another device file.
[ 16.449] (II) config/udev: Adding input device NextWindow Touchscreen (/dev/input/mouse0)
[ 16.449] (II) No input driver specified, ignoring this device.
[ 16.449] (II) This device may have been added with another device file.
[ 16.449] (II) config/udev: Adding input device Hewlett Packard HP Wireless Keyboard Kit (/dev/input/event11)
[ 16.449] (**) Hewlett Packard HP Wireless Keyboard Kit: Applying InputClass "evdev keyboard catchall"
[ 16.449] (II) Using input driver 'evdev' for 'Hewlett Packard HP Wireless Keyboard Kit'
[ 16.449] (**) Hewlett Packard HP Wireless Keyboard Kit: always reports core events
[ 16.449] (**) evdev: Hewlett Packard HP Wireless Keyboard Kit: Device: "/dev/input/event11"
[ 16.449] (--) evdev: Hewlett Packard HP Wireless Keyboard Kit: Vendor 0x461 Product 0x4e25
[ 16.449] (--) evdev: Hewlett Packard HP Wireless Keyboard Kit: Found keys
[ 16.449] (II) evdev: Hewlett Packard HP Wireless Keyboard Kit: Configuring as keyboard
[ 16.449] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-9/1-9:1.0/0003:0461:4E25.0004/input/input11/event11"
[ 16.449] (II) XINPUT: Adding extended input device "Hewlett Packard HP Wireless Keyboard Kit" (type: KEYBOARD, id 12)
[ 16.449] (**) Option "xkb_rules" "evdev"
[ 16.449] (**) Option "xkb_model" "pc104"
[ 16.449] (**) Option "xkb_layout" "us"
[ 16.450] (II) config/udev: Adding input device Hewlett Packard HP Wireless Keyboard Kit (/dev/input/event12)
[ 16.450] (**) Hewlett Packard HP Wireless Keyboard Kit: Applying InputClass "evdev keyboard catchall"
[ 16.450] (II) Using input driver 'evdev' for 'Hewlett Packard HP Wireless Keyboard Kit'
[ 16.450] (**) Hewlett Packard HP Wireless Keyboard Kit: always reports core events
[ 16.450] (**) evdev: Hewlett Packard HP Wireless Keyboard Kit: Device: "/dev/input/event12"
[ 16.450] (--) evdev: Hewlett Packard HP Wireless Keyboard Kit: Vendor 0x461 Product 0x4e25
[ 16.450] (--) evdev: Hewlett Packard HP Wireless Keyboard Kit: Found 1 mouse buttons
[ 16.450] (--) evdev: Hewlett Packard HP Wireless Keyboard Kit: Found scroll wheel(s)
[ 16.450] (--) evdev: Hewlett Packard HP Wireless Keyboard Kit: Found relative axes
[ 16.450] (II) evdev: Hewlett Packard HP Wireless Keyboard Kit: Forcing relative x/y axes to exist.
[ 16.450] (--) evdev: Hewlett Packard HP Wireless Keyboard Kit: Found absolute axes
[ 16.450] (II) evdev: Hewlett Packard HP Wireless Keyboard Kit: Forcing absolute x/y axes to exist.
[ 16.450] (--) evdev: Hewlett Packard HP Wireless Keyboard Kit: Found keys
[ 16.450] (II) evdev: Hewlett Packard HP Wireless Keyboard Kit: Configuring as mouse
[ 16.450] (II) evdev: Hewlett Packard HP Wireless Keyboard Kit: Configuring as keyboard
[ 16.450] (II) evdev: Hewlett Packard HP Wireless Keyboard Kit: Adding scrollwheel support
[ 16.450] (**) evdev: Hewlett Packard HP Wireless Keyboard Kit: YAxisMapping: buttons 4 and 5
[ 16.450] (**) evdev: Hewlett Packard HP Wireless Keyboard Kit: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 16.450] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-9/1-9:1.1/0003:0461:4E25.0005/input/input12/event12"
[ 16.450] (II) XINPUT: Adding extended input device "Hewlett Packard HP Wireless Keyboard Kit" (type: KEYBOARD, id 13)
[ 16.450] (**) Option "xkb_rules" "evdev"
[ 16.450] (**) Option "xkb_model" "pc104"
[ 16.450] (**) Option "xkb_layout" "us"
[ 16.451] (II) evdev: Hewlett Packard HP Wireless Keyboard Kit: initialized for relative axes.
[ 16.451] (WW) evdev: Hewlett Packard HP Wireless Keyboard Kit: ignoring absolute axes.
[ 16.451] (**) Hewlett Packard HP Wireless Keyboard Kit: (accel) keeping acceleration scheme 1
[ 16.451] (**) Hewlett Packard HP Wireless Keyboard Kit: (accel) acceleration profile 0
[ 16.451] (**) Hewlett Packard HP Wireless Keyboard Kit: (accel) acceleration factor: 2.000
[ 16.451] (**) Hewlett Packard HP Wireless Keyboard Kit: (accel) acceleration threshold: 4
[ 16.451] (II) config/udev: Adding input device Hewlett Packard HP Wireless Keyboard Kit (/dev/input/event13)
[ 16.451] (**) Hewlett Packard HP Wireless Keyboard Kit: Applying InputClass "evdev pointer catchall"
[ 16.451] (II) Using input driver 'evdev' for 'Hewlett Packard HP Wireless Keyboard Kit'
[ 16.451] (**) Hewlett Packard HP Wireless Keyboard Kit: always reports core events
[ 16.451] (**) evdev: Hewlett Packard HP Wireless Keyboard Kit: Device: "/dev/input/event13"
[ 16.452] (--) evdev: Hewlett Packard HP Wireless Keyboard Kit: Vendor 0x461 Product 0x4e25
[ 16.452] (--) evdev: Hewlett Packard HP Wireless Keyboard Kit: Found 3 mouse buttons
[ 16.452] (--) evdev: Hewlett Packard HP Wireless Keyboard Kit: Found scroll wheel(s)
[ 16.452] (--) evdev: Hewlett Packard HP Wireless Keyboard Kit: Found relative axes
[ 16.452] (--) evdev: Hewlett Packard HP Wireless Keyboard Kit: Found x and y relative axes
[ 16.452] (II) evdev: Hewlett Packard HP Wireless Keyboard Kit: Configuring as mouse
[ 16.452] (II) evdev: Hewlett Packard HP Wireless Keyboard Kit: Adding scrollwheel support
[ 16.452] (**) evdev: Hewlett Packard HP Wireless Keyboard Kit: YAxisMapping: buttons 4 and 5
[ 16.452] (**) evdev: Hewlett Packard HP Wireless Keyboard Kit: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 16.452] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-9/1-9:1.2/0003:0461:4E25.0006/input/input13/event13"
[ 16.452] (II) XINPUT: Adding extended input device "Hewlett Packard HP Wireless Keyboard Kit" (type: MOUSE, id 14)
[ 16.452] (II) evdev: Hewlett Packard HP Wireless Keyboard Kit: initialized for relative axes.
[ 16.452] (**) Hewlett Packard HP Wireless Keyboard Kit: (accel) keeping acceleration scheme 1
[ 16.452] (**) Hewlett Packard HP Wireless Keyboard Kit: (accel) acceleration profile 0
[ 16.452] (**) Hewlett Packard HP Wireless Keyboard Kit: (accel) acceleration factor: 2.000
[ 16.452] (**) Hewlett Packard HP Wireless Keyboard Kit: (accel) acceleration threshold: 4
[ 16.452] (II) config/udev: Adding input device Hewlett Packard HP Wireless Keyboard Kit (/dev/input/mouse1)
[ 16.452] (II) No input driver specified, ignoring this device.
[ 16.452] (II) This device may have been added with another device file.
[ 16.453] (II) config/udev: Adding input device HDA Intel PCH Mic (/dev/input/event6)
[ 16.453] (II) No input driver specified, ignoring this device.
[ 16.453] (II) This device may have been added with another device file.
[ 16.453] (II) config/udev: Adding input device HDA Intel PCH Line Out (/dev/input/event5)
[ 16.453] (II) No input driver specified, ignoring this device.
[ 16.453] (II) This device may have been added with another device file.
[ 16.453] (II) config/udev: Adding input device HDA Intel PCH Front Headphone (/dev/input/event4)
[ 16.453] (II) No input driver specified, ignoring this device.
[ 16.453] (II) This device may have been added with another device file.
[ 16.453] (II) config/udev: Adding input device PC Speaker (/dev/input/event3)
[ 16.453] (II) No input driver specified, ignoring this device.
[ 16.453] (II) This device may have been added with another device file.
[ 16.454] (II) config/udev: Adding input device HP WMI hotkeys (/dev/input/event7)
[ 16.454] (**) HP WMI hotkeys: Applying InputClass "evdev keyboard catchall"
[ 16.454] (II) Using input driver 'evdev' for 'HP WMI hotkeys'
[ 16.454] (**) HP WMI hotkeys: always reports core events
[ 16.454] (**) evdev: HP WMI hotkeys: Device: "/dev/input/event7"
[ 16.454] (--) evdev: HP WMI hotkeys: Vendor 0 Product 0
[ 16.454] (--) evdev: HP WMI hotkeys: Found keys
[ 16.454] (II) evdev: HP WMI hotkeys: Configuring as keyboard
[ 16.454] (**) Option "config_info" "udev:/sys/devices/virtual/input/input7/event7"
[ 16.454] (II) XINPUT: Adding extended input device "HP WMI hotkeys" (type: KEYBOARD, id 15)
[ 16.454] (**) Option "xkb_rules" "evdev"
[ 16.454] (**) Option "xkb_model" "pc104"
[ 16.454] (**) Option "xkb_layout" "us"
[ 1192.410] (II) intel(0): switch to mode [email protected] on eDP1 using pipe 0, position (0, 0), rotation normal, reflection none
[ 1811.202] (II) intel(0): switch to mode [email protected] on eDP1 using pipe 0, position (0, 0), rotation normal, reflection none
[ 5455.421] (II) intel(0): switch to mode [email protected] on eDP1 using pipe 0, position (0, 0), rotation normal, reflection none

I saw your post, and had found it incredulous that you have a 1920x1080 display. A bit of research and I found I was wrong.
So, it appears you are driving the panel at its native resolution. Unfortunately, trying to determine what you mean by "Fuzzy" is probably going to be like trying to nail Jello to a tree. But, let's give it a shot. Is it fuzzy before you start X? Are lines and shapes fuzzy? Or is it just text that is fuzzy?
If it is just fonts, it could be a problem with hinting. Hinting is where the edges of fonts are deliberately fuzzed and feathered to get the kerning correct when the physical pixels of the display don't quite line up. This works well, unless the thing doing the hinting does not understand the geometry of the display. In a color LCD, each pixel is actually made up of smaller sub pixels, generally three -- A red, a green, and a blue. Green is usually in the middle. Some displays have Two greens per pixel, arranged RGBG. Some displays even have yellow subpixels. Sometimes the subpixels are arranged left to right, sometimes they are arranged top to bottom. Long story short, if you have hinting enabled, but the geometry is configured incorrectly, bad things happen. Take a look at this wiki article

Bootcamp goes blank screen after startup sign.

I'm unable to start up my bootcamp. It just goes blank screen after the startup moving icon and stays blank screen. Can anyone help? Thank you in advance!!!

@MT1
‎Thank you for using HP Support Forum. I have brought your issue to the appropriate team within HP. They will likely request information from you in order to look up your case details or product serial number. Please look for a private message from an identified HP contact. Additionally, keep in mind not to publicly post ( serial numbers and case details).
If you are unfamiliar with the Forum's private messaging please click here to learn more.
Thank you,
Omar
I Work for HP

Blank screen after setting back to Factory Default Setup

After setting an HP Pavillion laptop with Windows XP back to the default factory setup, I get nothing but a blank screen after turning the laptop on. The HP screen doesn't appear, there is just a blank screen.

I have also gotten the blank, black screen, after using the Recovery CD's from HP on THREE different computers, please, if anyone knows how to help, HELP. I get nothing, tried hard off, new memory, new hard drives, no battery, battery, new battery, new a/c adapter, etc. Only one is still under warrenty, a HDX-16t, the other two, an HDX 16 and a Pavilion -1135nr

I opened my iPod Touch up to fix my home button. When i closed it back up it had a white screen. I tried pressing lock and home button for 10 seconds and it worked but while i'm using it it goes white with lines on the screen. Help please

I opened my iPod Touch up to fix my home button. When i closed it back up it had a white screen. I tried pressing lock and home button for 10 seconds and it worked but while i'm using it it goes white with lines on the screen. Help please. This has been happening for a while and i've tried everything but it doesn't work.

Try:
fix for Home button
iPhone Home Button Not Working or Unresponsive? Try This Fix
- If you have iOS 5 and later you can turn on Assistive Touch it add the Home and other buttons to the iPods screen. Settings>General>Accessibility>Assistive Touch
- If not under warranty Apple will exchange your iPod for a refurbished one for:
Apple - Support - iPod - Repair pricing
You can do it an an Apple store by:
Apple Retail Store - Genius Bar
or sent it in to Apple. See:
Apple - Support - iPod - Service FAQ
- There are third-party places like the following that will repair the Home button. Google for more.
iPhone Repair, Service & Parts: iPod Touch, iPad, MacBook Pro Screens

White screen after forced reload (used to fix previous white screen issue)

Similar Messages

Maybe you are looking for