White screen and a clicking sound MBP 13" mid. 2010

My MBP don't start. It's a white screen and a clicking sound, no more avctivity.
Macbook Pro mid. 2010.
Any one know what the problem is???

EmmaAastrand wrote:
Oh no.
It cost a lot of money huh?
it really depends on what exactly the problem is. take is to an Apple Store or AASP and have them look at it
But what have I done to get this problem? I don't understand.
You may not have done anything. Parts can go bad on their own.

Similar Messages

Intel Imac stuck at white screen and 3 beeps sound continously....

Intel Imac stuck at white screen and 3 beeps sound continously when power on. Pls help......

Well Barry, as for the Ram, all this while are install by apple technician since very day i bought iMac on july 2008. Just wondering What's actually went wrong..
Very first day I bought iMac, few days later, system cant even on. AppleCare Centre exchanged a new set of iMac.
two weeks later, i notice several dead pixels appearing on screen, call to log a case with them, later on, they changed a new panel.
After several months pass, been using happily with iMac... but since now, this problem occurs. So fastrating... My third time encounters problem with iMac. sign
Any suggestion? If not, I guess i have to bring this bulky iMac to applecare centre again. sign

Macbook Air starts with a white screen and permanent "poing"-sound...

Macbook Air starts with a white screen and permanent "poing"-sound...
Tried SMU, PRAM, MMU resets, but nothing helps...
Thank you for your support.

You need to take it in for service, it may be a stuck key or component failure.

Intel OS X 10.7 iMac has white screen and three-alarm sound, won't start up

Intel OS X 10.7 iMac has white screen and three-alarm sound, won't start up

The 3 beeps during start-up are telling you that the RAM is bad.
If you can access the RAM modules, you may try taking them out and putting them back in, perhaps it's only bad contacts.
If that doesn't help, you'll need new RAM module(s).

Macbook start-up but stays on white screen and then clicking noice

I was working on my macbook and suddenly it just became incredibly slow and then it was non-responsive. So I shut it off, and when I turned it back on, it was just a white screen, with the clicking noice in the bottom right corner and then a question mark symbol came up in the middle of the screen and now I can't access any of my important files that I need, Someone help please!!

If you have another computer and a FireWire cable you can try booting this computer into Target Disk Mode by holding the T key at bootup, and then attach the computer to another one via the FireWire cable. This should allow the second computer to see your computer's drive as an external disk.
Alternatively you can try booting up off the Leopard DVD and see if you can access the drive from the Disk Utility software on the DVD. This will be available in the "Utilities" menu after you select your language. From here you can try running a drive repair and hope you can at least get it to be readable.
Unfortunately beyond this, and without any other drive utility software, there's not much you can do without taking it to a technician who can hopefully remove the drive and read data off of it with special hardware. When drives go bad they tend to just stop working altogether.

White screen and high pitched sound whenever ipod is on

Anyone know how to fix this? Haven't used this ipod in a while so i charged it up to the max, but when i turn it on the screen remains white and a high pitched sound constantly rings until it is turned off. Tried restarting the ipod but i still get the same white screen. I even updated the software on my computer but no fixes yet...

Try connecting the ipod and resetting it while it is connected.
Also, here are other pages that may help
*[Ipod not recognized properly|http://support.apple.com/kb/TS1538]*
*[iPod Missing in My Computer or iTunes for Windows|http://support.apple.com/kb/TS1369 ]*
Try *[Changing the Drive Letter|http://support.apple.com/kb/TS1493]*

White screen and constant beeping

I have a 2011 macbook pro. This morning when I powered it on all I get is a white screen and constant beeping sound. The beeping goes away after about 2 minutes. Then there is a folder with a flashing ?. Is this something I can take care of at home or do I need to take it in to an apple store?

I noted that nowhere in that article is beeping mentioned.
Instead of seeing the Finder or the login window after startup, your computer may stop responding and the display may only show a persistent gray screen (you may also see an Apple logo, spinning gear, spinning globe, prohibitory sign, or a folder with a flashing question mark on it). Note: The below steps may not apply if a blue screen appears during start up.

My 13" macbook just stopped working. When you turn it on you get a white screen and hear a repetitive clicking sound on the left side. Is this the hard drive? Any suggestions on replacement drives?

My 13" macbook just stopped working. When you turn it on you get a white screen and hear a repetitive clicking sound on the left side. Is this the hard drive? Any suggestions on replacement drives?
Thanks

Put your install DVD into the optical drive (CD/DVD drive) and reboot. Be sure to either use the disc that came with your Mac, or, if you installed a later Mac OS X version from disc, use the newer disc. As soon as you hear the boot chime, hold down the "c" key on your keyboard (or the Option Key until the Install Disk shows up) until the apple shows up. That will force your MacBook to boot from the install DVD in the optical drive.
When it does start up, you'll see a panel asking you to choose your language. Choose your language and press the Return key on your keyboard once. It will then present you with an Installation window. Completely ignore this window and click on Utilities in the top menu and scroll down to Disk Utility and click it. When it comes up is your Hard Drive in the list on the left?
If it is, then click on the Mac OS partition of your hard drive in the left hand list. Then select the First Aid Tab and run Repair Disk. The Repair Disk button won't be available until you've clicked on the Mac OS partition on your hard drive. If that repairs any problems run it again until the green OK appears and then run Repair Permissions. After repairing use Startup Disk from the same menu to choose your hard drive for restarting from your hard drive.
If your hard drive isn’t recognized in Disk Utility then your hard drive is probably dead.

27" iMac starts up and stays on white screen and I hear a clicking sound from inside.

I am starting up my iMac and it is frozen on the white screen and I can hear a clicking sound coming from inside?

Hi,
I'm agree with Roger, that could be a HD Failure, but that happens to me once, and the problem was on the Power Supply, so I took it to an Apple Service and it was changed.
At last but not at least, this type of problems could come from the mother board (hope this not to be your case).
Regards,
:: Appletoch ::

Recently when clicking on Safari, it refused to open saying there were some components damaged. It was suggested I backup, remove OSX and reinstall. Now all I get is white screen and apple logo when starting. What to do?l

I Have an iMac desktop purchased in 2010 with OS X 6.1.6 and Snow Leapard. Recently after starting up, I was not able to open Safari. I checked for updates and all was well. I tried again and got a message saying Safari could not be opened because some components were damaged. After using Disk utilities to try and repair, it was suggested I uninstall OS X and reinstall from the disk. I did not at the time because I wanted to backup some info to a USB drive. But now when I startup all I get is the white screen and Apple logo and the loading symbol. What happened and How can Imfix it? I am not very tech savvy and don't know where to turn!

Hi nancy mfromamity harbor,
Welcome to the Support Communities! It sounds like reinstalling the Snow Leopard operating system is your next step. This should not affect the documents and data that you currently have on your iMac. I'll include the information to show you how below.
Mac OS X 10.6: Reinstalling Mac OS X
http://support.apple.com/kb/PH6606
Under some circumstances, you may need to reinstall Mac OS X. You can reinstall Mac OS X while keeping your files and user settings intact.
Note:To reinstall Mac OS X from another computer on your network, see:
Using another computer’s DVD or CD drive
To reinstall Mac OS X:
Insert the Mac OS X installation disc and double-click the Install Mac OS X icon.
Follow the onscreen instructions. In the pane where you select a disk, select your current Mac OS X disk (in most cases, it will be the only one available).
If you want to control which parts of Mac OS X are installed, click Customize, and then select the parts you want to install.
To start the installation, click Install.
If you purchased a standalone version of Mac OS X, these installation instructions are in a PDF file located on the Mac OS X installation disc.
If you need to reinstall the version of Mac OS X that was on your computer when you purchased it, or if you need to restore all the software on your computer (including Apple software, third-party applications, and other printer drivers), refer to the documentation that came with your computer.
If you need to reinstall Mac OS X and you’ve been using Time Machine to back up your applications, files, and user settings, you can easily restore this information from your Time Machine backup disk after you’ve reinstalled Mac OS X.
Nancy, here is the contact information if you need technical assistance to get your iMac up and running.
Intel-based iMac - Contact Support - Apple Support
http://www.apple.com/support/imac/intel/contact/
Good luck!
- Judy

I downloaded the new itunes update and now no videos will play. I get a white screen and no sound. also a bunch of songs i have purchased no longer play.

i have a bunch of files that can't be located and some songs that i purchase that when you click on them they skip to the next song. also all my videos, movies and tv shows i purchased come up with a white screen and no sound they show they are playing

"Add Folder to Library" is still where it always was, in the File menu.
The new "innovation" is that the File menu is hidden by default! But you can reveal it by using CTRL+B.

When I first open Firefox it is fine but if I open a second tab to search another site I get a white screen and have to continually click 'back', click the site link, white screen, back, click the link, white screen and so on.

When I first open Firefox it is fine but if I open a second tab to search another site I get a white screen and have to continually click 'back', click the site link, white screen, back, click the link, white screen and so on.

This can also be a problem with the files [http://kb.mozillazine.org/sessionstore.js sessionstore.js] and sessionstore.bak in the [http://kb.mozillazine.org/Profile_folder_-_Firefox Profile Folder]
Delete [http://kb.mozillazine.org/sessionstore.js sessionstore.js] and sessionstore.bak in the [http://kb.mozillazine.org/Profile_folder_-_Firefox Profile Folder]
If you see files sessionstore-##.js with a number in the left part of the name like sessionstore-1.js then delete those as well.
You will have to redo App Tabs and Tab Groups after deleting sessionstore.js.
See:
* http://kb.mozillazine.org/Session_Restore

When i click on messages the application opens a white screen and don't open it.

when i click on messages the application opens a white screen and don't open it.

Hi aldamtgf,
Thanks for visiting Apple Support Communities.
If Messages is only displaying a white screen when you open it, first force close the application using this method:
Double-click the Home button.
Swipe left or right until you have located the app you wish to close.
Swipe the app's preview up to close it.
These steps come from this article:
iOS: Force an app to close
http://support.apple.com/kb/ht5137
If Messages still does not open normally, restart your iPhone next:
iOS: Turning off and on (restarting) and resetting
http://support.apple.com/kb/ht1430
All the best,
Jeremy

Trying to start my IMac click on my admin icon and enter the correct password but then flashes to white screen and back to sign in, my desktop wont come on ... help!!!!

Trying to start my IMac click on my admin icon and enter the correct password but then flashes to white screen and back to sign in, my desktop wont come on ... help!!!!

Boot to the Recovery HD:
Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
When the menubar appears select Terminal from the Utilities menu. Enter resetpassword at the prompt and press RETURN. Follow instructions in the dialog window that will appear.
Or see Reset a Mac OS X 10.7 Lion Password and OS X Lion- Apple ID can be used to reset your user account password.

Each time i press the power button i just have a blank white screen, and intermittent sounds/tone. No apple logo, or spinning circle.

Each time i press the power button i just have a blank white screen, and intermittent sounds/tone. No apple logo, or spinning circle.
I used to install the rEFIt to boot with win7. When I deleted win7, I didn't uninstall rEFIt. Nothing wrong with it. One day after I watched movie in full screen,I pressed esc to quit. Then I found the touchpad didn't work. I can't turn off air. I just pressed power button for a little while. It rebooted, then my nightmare just began...
I have tried everything, PRAM, command+R, literally everything. No change.
But when I plug a CD-ROM with USB, I can only here one BONG, just once, then white screen, Like waiting for something...
I took it to a service center in China, they told me the CPU had broken. SInce it's one month out of warranty, they wanted to charge me for like $250....
I really don't think that's CPU's problem. I checked the history, it seems like somebody else also had the problem before.
Can anyone give me some hints??? Thanks!!!!!! Or I have to take it back to America to check....

Impossible, there are zero, as in none, zip, nadda viruses for OS X. If you have viruses on it they are for MS Windows and will not affect OS X. I suspect the hard disk has crashed, if you have backup then it's not a big deal to have it changed, just take it into your local Apple Store or AASP for service. If you have not been backing it up you may be in for a painful lesson on why backup is critical.

White screen and a clicking sound MBP 13" mid. 2010

Similar Messages

Maybe you are looking for