White screen and very hot

i have a ipod touch 3rd generation 8gb ( i cant remember what IOS it is running but i know it recent 4.something)
last week my ipod chrashed and became unresponsive i did soft reset on it ( holding down the sleep/wake button and the home button )
half way through the rebooting process it got the white screen again i also noticed that the back and home button had became very hot allmost to hot to touch i tried every thing to get rid of it i even left it for 15 min but in the end i had to soft reset it again.
this time it said it was out of battery so i plugged it in.
it booted and came to the lock screen then it froze and got the white sceen.
this happens every time it boots.
i cant reset it as i cant keep it connected to my computer long enought for itunes or my computer to reconise it before it frezes again
and i cant charge it as it gets a white screen and becomes very hot.
and i also cant put it into DFU mode as it frezzes before it turns on
allso my warrenty is out so i cant get a new one
some one please help me
Springwoll

I would make an appointment at the Genius Bar of an Apple store.  It is free (except for your time) and then should be able to ell you want is wrong and price repair.

Similar Messages

  • IPod Touch had white screen and was hot

    Yesterday my iPod Touch had a white screen and was hot. I tried holding the power button and home button and it didn't work. What happened was the iPod was off. I turned it on and saw it had 30% battery and then turned off wifi. I had it on a table, and came back 10 minutes and saw it was black and wouldn't turn on. I then tried to charge it and the screen became white and was really hot in the back especially. I think it was white for like an hour. I held the iPod in front of the AC to cool it down..... ..... It cooled it down and then the iPod went black ever since today. I can't seem to do anything to it...:/ My computer & iTunes do not recognize the device.

    Try:
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try on another computer          
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order. Because of the hotness I suspect a hardware problem
    Apple Retail Store - Genius Bar       
    Apple will exchange your iPod for a refurbished one for $199 for a 64 GB 4G and $99 for the other 4Gs. They do not fix yours.
    Apple - iPod Repair price                       
    A third-party place like the following maybe less. Google for more.
    iPhone Repair, Service & Parts: iPod Touch, iPad, MacBook Pro Screens

  • Recently when clicking on Safari, it refused to open saying there were some components damaged. It was suggested I backup, remove OSX and reinstall. Now all I get is white screen and apple logo when starting. What to do?l

    I Have an iMac desktop purchased in 2010 with OS X 6.1.6 and Snow Leapard. Recently after starting up, I was not able to open Safari. I checked for updates and all was well. I tried again and got a message saying Safari could not be opened because some components were damaged. After using Disk utilities to try and repair, it was suggested I uninstall OS X and reinstall from the disk. I did not at the time because I wanted to backup some info to a USB drive. But now when I startup all I get is the white screen and Apple logo and the loading symbol. What happened and How can Imfix it? I am not very tech savvy and don't know where to turn!

    Hi nancy mfromamity harbor,
    Welcome to the Support Communities! It sounds like reinstalling the Snow Leopard operating system is your next step.  This should not affect the documents and data that you currently have on your iMac. I'll include the information to show you how below.
    Mac OS X 10.6: Reinstalling Mac OS X
    http://support.apple.com/kb/PH6606
    Under some circumstances, you may need to reinstall Mac OS X. You can reinstall Mac OS X while keeping your files and user settings intact.
    Note:To reinstall Mac OS X from another computer on your network, see:
    Using another computer’s DVD or CD drive 
    To reinstall Mac OS X:
    Insert the Mac OS X installation disc and double-click the Install Mac OS X icon.
    Follow the onscreen instructions. In the pane where you select a disk, select your current Mac OS X disk (in most cases, it will be the only one available).
    If you want to control which parts of Mac OS X are installed, click Customize, and then select the parts you want to install.
    To start the installation, click Install.
    If you purchased a standalone version of Mac OS X, these installation instructions are in a PDF file located on the Mac OS X installation disc.
    If you need to reinstall the version of Mac OS X that was on your computer when you purchased it, or if you need to restore all the software on your computer (including Apple software, third-party applications, and other printer drivers), refer to the documentation that came with your computer.
    If you need to reinstall Mac OS X and you’ve been using Time Machine to back up your applications, files, and user settings, you can easily restore this information from your Time Machine backup disk after you’ve reinstalled Mac OS X.
    Nancy, here is the contact information if you need technical assistance to get your iMac up and running.
    Intel-based iMac - Contact Support - Apple Support
    http://www.apple.com/support/imac/intel/contact/
    Good luck!
    - Judy

  • My IPad Air is frozen with a white screen and Apple Logo on it.

    My Ipad Air is frozen with the white screen and apple logo.  I've tried resetting it several times and that doesn't help.  I tried connecting to ITunes, but it isn't recognizing the device. 
    The battery is fully charged, at least for now, so I am not sure what else to try.

    FORCE IPAD INTO RECOVERY MODE
    1. Turn off iPad
    2. Turn on computer and launch iTunes (make sure you have the latest version of iTune)
    3. Plug USB cable into computer's USB port
    4. Hold Home button down and plug the other end of cable into docking port.
    DO NOT RELEASE BUTTON until you see picture of iTunes and plug
    5. Release Home button.
    ON COMPUTER
    6. iTunes has detected iPad in recovery mode. You must restore this iPad before it can be used with iTunes.
    7. Select "Restore iPad"...
    Note:
    1. Data will be lost if you do not have backup
    2. You must follow step 1 to step 4 VERY CLOSELY.
    3. Repeat the process if necessary.

  • White screen and overheating

    I have an iPod touch 3rd gen, and one day i hit the sleep/wake button and it went directly to a white screen. After about a minute of it being on the white screen I noticed the bottom left corner of the iPod was becoming extremely hot. I've tried to do a hard reset multiple times but no luck. Let it cool off over night and it still goes to white screen then gets hot. And with the overheating I'm afraid to plug it in incase it's the battery oveheating, cuz I don't want it to explode or somethin. So does anyone know what's wrong? Is it as simple as a shot battery or somethin else? Please help.'I've become stupidly dependent on my iPod in my day to day life.

    Have you tried resetting the player with the little button on the side?

  • Why if you open multiple applications, my phone became a white screen and can not do anything

    why if you open multiple applications, my phone became a white screen and can not do anything ?

    Mohe2192 wrote:
    i just open 3 application and than my handphone become white screen ?
    That is not normal. Very few apps are actually running in the background. What troubleshooting steps have you taken? Have you reset the phone by simultaneously pressing the Home and power buttons until the apple appears? Restored from back up? Restored as new?

  • Intel Imac stuck at white screen and 3 beeps sound continously....

    Intel Imac stuck at white screen and 3 beeps sound continously when power on. Pls help......

    Well Barry, as for the Ram, all this while are install by apple technician since very day i bought iMac on july 2008. Just wondering What's actually went wrong..
    Very first day I bought iMac, few days later, system cant even on. AppleCare Centre exchanged a new set of iMac.
    two weeks later, i notice several dead pixels appearing on screen, call to log a case with them, later on, they changed a new panel.
    After several months pass, been using happily with iMac... but since now, this problem occurs. So fastrating... My third time encounters problem with iMac. sign
    Any suggestion? If not, I guess i have to bring this bulky iMac to applecare centre again. sign

  • Hp pavilion g4 1104dx display white screen and caps lock blink twice

    Hi i recently used my hp laptop screen to test another laptop acer aspire 5517. After the test i reconnected back the cable only to power it on a white screen appeared with caps lock blink twice. I thought the problem might be screen shot so i decided to connect to external monitor but still no signal on external monitor even after pressing fn+f4. What might be the problem thanks.

    Hi there , Thank you for visiting the HP Support Forums and Welcome! This is a great site to get answers and ask questions. I understand you are having an issue with your Notebook. You had stated that you receive a White Screen and the Caps Lock are blinking twice. Please be very careful when it comes to blink patterns as sometimes there can be a pause between the blinking.   Before you start troubleshooting, please note remove any and all USB devices. Disconnect all non-essential devices, as these could cause some issues. Here is the first document I found called Performing a Hard Reset or Forced Reset. If that does not work, please follow Computer Does Not Start (Windows 8). The last document I have for you that may help is called Computer does not start and the LEDs blink or the computer beeps. Please follow these provided troubleshooting steps, re-post and let me know how everything went. Thank you! Have a great day!

  • My ipod has a white screen and i cant do nothing i click on the home the volume and the lock botton but nothing work what do i do

    my ipod has a white screen and i cant do nothing i click on the home the volume and the lock botton but nothing work what do i do

    Let the battery fully drain. After charging for an hour try:
    - A reset.
    Reset iPod touch:  Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Connect to computer and try to retore.
    - If the screen remains white and you can't trun it off then it is time for an appointment at the Genius Bar of an Apple store. You very likely have a hardware problem.

  • Help! When I select "Phone" it tries to open and gives me a white screen and closes. I cannot view my missed calls or voicemails.

    If anyone knows anything about this...
    When I select "Phone" on my home screen the iPhone attempts to open it, brings up a white screen and then will shut back down. I have 8 missed calls or voicemails yesterday and I couldn't check any of them. Does this happen to anyone else?
    Also, when I receive a call and I answer it does not give me the ability to end call or any of my options (sources, keypad,etc.) during the call.
    Basically, I can't do anything with my contacts, favorites, missed calls or voicemails.
    Can someone please help?

    I have tried that multiple times. I have also made sure that I have the latest updates. Would haveing 27,000+ contacts have anything to do with it?
    Sometimes it works and sometimes it doesn't

  • This is my first mac, it is a macbook pro. i restarted it but when it started back up i saw a white screen and then it prompted me to insert the reboot disk. anyone else have this problem?

    I recently bought a Macbook Pro, this is my first Mac. I restarted it, but when it started back there was a plain white screen and then it prompted me to insert the reboot disk. Has anyone else had this problem and is there a way to do this manually like with PC's?

    The new Mac's came with OS X Lion 10.7 and there are no boot disks.
    Since it's so new, take it back to the Apple Store and let them deal with it.
    If not you can hold Command and r (as in rotten) keys down and boot the computer.
    You'll be presented with a several options, including one to reinstall OS X Lion provided you have a Apple ID, which means you have to use Safari in there to set one up. To do that you need to set up a email account with Google or Yahoo. Once you get the ID, then you can download Lion and reinstall it.
    It's so stupid not having a copy of the OS on hand to perform your own repairs.
    Of course Apple will be happy to sell you a $69 Lion USB stick.
    Like I said, take it back to the store, and try to get your money back, that will force them to think about just giving you a replacement machine that works.
    Lion doesn't work really but it can be acceptable until the patches get released.

  • My Macbook Pro is frozen on the login page with a white screen and only my login picture. How do I fix this? I can't turn it off and I closed it and let it charge but it's still not working.

    My Macbook Pro is frozen on the login page with a white screen and only my login picture. How do I fix this? I can't turn it off and I closed it and let it charge but it's still not working. It's only 3 months old and was working perfectly fine 30min before this happened.

    Hello Kierasully,
    I would start your troubleshooting with the article below for issues of not being able to log in to your Mac. Start with booting up in to Safe Boot as well as resetting PRAM on your Mac. If that does not work, then verify the hard drive with booting to the Recover HD and go to Disk Utility to verify it.
    Mac OS X: Gray screen appears during startup
    http://support.apple.com/en-us/ts2570
    Regards,
    -Norm G. 

  • When I first open Firefox it is fine but if I open a second tab to search another site I get a white screen and have to continually click 'back', click the site link, white screen, back, click the link, white screen and so on.

    When I first open Firefox it is fine but if I open a second tab to search another site I get a white screen and have to continually click 'back', click the site link, white screen, back, click the link, white screen and so on.

    This can also be a problem with the files [http://kb.mozillazine.org/sessionstore.js sessionstore.js] and sessionstore.bak in the [http://kb.mozillazine.org/Profile_folder_-_Firefox Profile Folder]
    Delete [http://kb.mozillazine.org/sessionstore.js sessionstore.js] and sessionstore.bak in the [http://kb.mozillazine.org/Profile_folder_-_Firefox Profile Folder]
    If you see files sessionstore-##.js with a number in the left part of the name like sessionstore-1.js then delete those as well.
    You will have to redo App Tabs and Tab Groups after deleting sessionstore.js.
    See:
    * http://kb.mozillazine.org/Session_Restore

  • HT1414 HOw do I back up and restore If I plug my ipod in and it does not appear in the devices column. I have a white screen and i'm trying to fix it and nothing is working :(

    How do I back up and restore my ipod touch if when i connect it to itunes It does not appear in the devices column? I have a white screen and have tried holding down the wake/sleep and home buttons and that is not working. Please help

    Take it in for repair/replace to your local Apple retailer.

  • Hello i am having issues and it is quite irritating my ipod touch 2g will not turn on and when it finally did it was just a white screen and it asked if i wanted to restore to factory defaults so i did so. it didnt do anything it was still just a white sc

    hello i am having issues and it is quite annoying i just want to you use  my ipod again. ok so one day when i went to use it it wouldnt turn on actually it wouldnt do anything i tried everything it wouldnt connect to the computer or even show up it wouldnt charge i mean nothin. so then the other day i figued hey ill try plugging it in again and it started up and the screen was white no apple logo just a white screen then i connected to the computer ahah soo i restored it to factory settings well then it still was a white screen and then it shut off and will not turn on again no matter what i do. any advice would help. thanks

    My IPOD is also dead this evening afte trying to install the 2.2.1 update, I have a blank screen and no response from IPOD (Screen is blank)
    I have also the USB Device Not Recognised message, I have tried holding the power and home buttons down for prolonged period, this provokes a response from the PC ie another USB device not recognised message but nothing on screen.
    I have also ITUNES open hoping it would pick up the device and suggest reset or reinstallation / restore, but nothing !!! Help, any apple support folk on here ?
    What should I do next ?
    Frustrated
    Adam

Maybe you are looking for

  • Can a photo gallery like this be created in html/CSS?

    http://jeffsullivan.smugmug.com/Landscapes/National-Parks/Zion-National-Park-Utah/1946310_ 6PtgP#136213013_XVhBQ I like the way these galleries expand to browser width - both the thumbs and big image enlarge. I want to learn to make a photo gallery (

  • My microphone disappeared in my messages on mini iPad

    Where did my microphone go when I try to use it in My Messages?

  • Premier Elements 12 organizer crashes with Lesson 01 video

    I recently upgraded to Premier ELements 12 & Photoshop Elements 12. I purchased Classroom in a book for Premier Elements 12. I followed the instructions in the book to load Lesson 01, and now the organizer crashes every time I start it. I tried to re

  • SQLite TRUNCATE in Air?

    I'm looking to truncate my database.  According to SQLite documentation, issuing a "DELETE FROM databaseName" should run a fast truncate.  This does not seem to work within AIR from my tests.  It (the documentation) also states that"The truncate opti

  • CS3 Error [..\..Src\DirectoryRegistry.cpp-283]

    Hi, I need your help. After crashing Premiere CS3 I tried to re launch it and this appears [..\..Src\DirectoryRegistry.cpp-283] Can you please help me?