White Screen At Login

Hi, I've had this sudden problem when starting up my Windows 7 OS a few days ago.
When I start up my computer, it takes a very long time to get to the login screen, and there is a lot of latency when typing in my password to log in. The fingerprint strip on my laptop that I usually use does not work here. The welcome screen shows and
freezes for about 2 minutes and then all I get is a white screen and a cursor. I never see any of my desktop, and if I ctrl+alt+del, there is no response.
Although it is just as slow to start as before, safe mode works perfectly which is what I am using now. I have tried to run a system restore, but it changes nothing.
In short, startup is incredibly slow and any attempt to run in normal mode hits a dead end immediately.
I would appreciate some help solving this issue.

Hi,
To exclude 3rd software and services, please make a diagnostic startup to check if this issue still occurs.
Type msconfig in Run, hit Enter.
Under Gerneral tab, check the Diagnostic startup option.
Also, please try updating your graphic card driver to the latest version from manufacturer website.
To detect misbehaving drivers, you can use driver verifier tool.
http://support.microsoft.com/kb/244617/en-us
Andy Altmann
TechNet Community Support

Similar Messages

  • Mavericks white screen after login

    After upgrading to Mavericks my MacBook now goes to a white screen after login screen. Anybody having same issue? Any solutions?

    Reinstalling Mavericks, Lion/Mountain Lion Without Erasing the Drive
    Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
    Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the main menu. Repair the Hard Drive and Permissions as follows.
    When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list.  In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu.
    Reinstall Lion/Mountain Lion, Mavericks: Select Reinstall Lion/Mountain Lion, Mavericks and click on the Continue button.
    Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.

  • TS2570 white screen after login

    i have a white screen after login on my macbook pro 17' what does that mean?
    i cant do anything but all the users are accesable
    no finder no desktop... nothing

    Reinstall Lion, Mountain Lion, or Mavericks without erasing drive
    Boot to the Recovery HD:
    Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
    Repair
    When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list.  In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported then click on the Repair Permissions button. When the process is completed, then quit DU and return to the main menu.
    Reinstall Lion, Mountain Lion, or Mavericks
    OS X Mavericks- Reinstall OS X
    OS X Mountain Lion- Reinstall OS X
    OS X Lion- Reinstall Mac OS X
         Note: You will need an active Internet connection. I suggest using Ethernet
                     if possible because it is three times faster than wireless.

  • White screen after login?????

    When I start my computer, it goes through the opening screen, boot sound, apple, etc.   get the option to type in my pas word and it goes to a white screen.  What do I need to do???

    scottishshaman,
    since you have Mavericks installed, you can try this: boot your MacBook Pro into Recovery mode by holding down a Command key and the R key as it starts up. Once the Mac OS X Utilities menu appears, select Disk Utility. On the left-hand side of the Disk Utility window, select your internal disk’s boot partition (typically called “Macintosh HD”). On the right-hand side, press the Verify Disk button if it’s not greyed out; if it is greyed out, or if it reports that errors were found, press the Repair Disk button. Once the verification/repair is completed, exit Disk Utility and select Restart from the Apple menu to restart in normal mode. Does it reach the login screen now?

  • Stuck on white screen after login

    My 13" macbook pro is stuck on the white screen "after" the user login page. It started happening after installing the latest update then gave me a "start up disc is full error also. I know to clean up unnecessary files but can't do that when it's stuck before I can get to a point where I can access them. Any Ideas and help would be great.
    Thanks
    RH

    Try a PRAM reset:
    Power off, power on holding the following keys:
    OPTION+COMMAND+P+R
    Continue to hold thee keys till you here the start chime 2 times hen release.

  • White screen after login on macbook air

    A white screen appears after I login on a Macbook air. Can move mouse but thats it

    Reinstall Lion, Mountain Lion, or Mavericks without erasing drive
    Boot to the Recovery HD:
    Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
    Repair
    When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list.  In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported then click on the Repair Permissions button. When the process is completed, then quit DU and return to the main menu.
    Reinstall Lion, Mountain Lion, or Mavericks
    OS X Mavericks- Reinstall OS X
    OS X Mountain Lion- Reinstall OS X
    OS X Lion- Reinstall Mac OS X
         Note: You will need an active Internet connection. I suggest using Ethernet
                     if possible because it is three times faster than wireless.

  • White screen on login

    Sometimes, after boot, login screen appears and when I move my mouse to select user everything disappear and a white screen (of death) appears and there's nothing I can do rathen than move mouse. Needs to be powered off. Then I power on and everything works.
    Waht is that strange behaviour?

    Here is the "selective log" of the failed boot
    28/01/14 21:32:00,000 bootlog[0]: BOOT_TIME 1390941120 0
    28/01/14 21:32:21,000 syslogd[20]: Configuration Notice:
    ASL Module "com.apple.appstore" claims selected messages.
    Those messages may not appear in standard system log files or in the ASL database.
    28/01/14 21:32:21,000 syslogd[20]: Configuration Notice:
    ASL Module "com.apple.authd" sharing output destination "/var/log/system.log" with ASL Module "com.apple.asl".
    Output parameters from ASL Module "com.apple.asl" override any specified in ASL Module "com.apple.authd".
    28/01/14 21:32:02,441 com.apple.launchd[1]: *** launchd[1] has started up. ***
    28/01/14 21:32:02,441 com.apple.launchd[1]: *** Shutdown logging is enabled. ***
    28/01/14 21:32:21,000 kernel[0]: Longterm timer threshold: 1000 ms
    28/01/14 21:32:21,000 kernel[0]: PMAP: PCID enabled
    28/01/14 21:32:25,000 kernel[0]: Previous Shutdown Cause: 0
    28/01/14 21:32:32,442 mdmclient[41]: ApplePushService: Timed out making blocking call, failed to perform call via XPC connection to 'com.apple.apsd'
    28/01/14 21:32:33,530 mdmclient[41]: ApplePushService: Timed out making blocking call, failed to perform call via XPC connection to 'com.apple.apsd'
    28/01/14 21:32:34,369 apsd[62]: CGSLookupServerRootPort: Failed to look up the port for "com.apple.windowserver.active" (1102)
    28/01/14 21:32:35,611 stackshot[29]: Timed out waiting for IOKit to finish matching.
    28/01/14 21:32:44,000 kernel[0]: Network delay is not specified! Defaulting to 0x384
    here I think is the problem: my screen was off, when I power it on I saw for a second the login screen and then the white screen of death:
    28/01/14 21:32:44,745 WindowServer[95]: Found 1 modes for display 0x00000000 [1, 0]
    28/01/14 21:32:44,774 WindowServer[95]: WSMachineUsesNewStyleMirroring: true
    28/01/14 21:32:44,774 WindowServer[95]: Display 0x08c413e6: GL mask 0x4; bounds (0, 0)[1920 x 1080], 18 modes available
    Main, Active, on-line, enabled, boot, Vendor 5c23, Model 1040, S/N 3e5, Unit 2, Rotation 0
    UUID 0xab86e364b8291c1af0133542500a565c
    28/01/14 21:32:44,774 WindowServer[95]: Display 0x003f003f: GL mask 0x8; bounds (0, 0)[1920 x 1200], 2 modes available
    off-line, enabled, Vendor ffffffff, Model ffffffff, S/N ffffffff, Unit 3, Rotation 0
    UUID 0xffffffffffffffffffffffffffffffff
    28/01/14 21:32:44,775 WindowServer[95]: Display 0x003f003c: GL mask 0x1; bounds (0, 0)[0 x 0], 1 modes available
    off-line, enabled, Vendor ffffffff, Model ffffffff, S/N ffffffff, Unit 0, Rotation 0
    UUID 0xffffffffffffffffffffffffffffffff
    28/01/14 21:32:44,775 WindowServer[95]: Display 0x003f003d: GL mask 0x2; bounds (0, 0)[0 x 0], 1 modes available
    off-line, enabled, Vendor ffffffff, Model ffffffff, S/N ffffffff, Unit 1, Rotation 0
    UUID 0xffffffffffffffffffffffffffffffff
    28/01/14 21:32:44,775 WindowServer[95]: WSSetWindowTransform: Singular matrix
    28/01/14 21:32:44,775 WindowServer[95]: WSSetWindowTransform: Singular matrix
    28/01/14 21:32:44,784 WindowServer[95]: Display 0x08c413e6: GL mask 0x4; bounds (0, 0)[1920 x 1080], 18 modes available
    Main, Active, on-line, enabled, boot, Vendor 5c23, Model 1040, S/N 3e5, Unit 2, Rotation 0
    UUID 0xab86e364b8291c1af0133542500a565c
    28/01/14 21:32:44,784 WindowServer[95]: Display 0x003f003f: GL mask 0x8; bounds (2944, 0)[1 x 1], 2 modes available
    off-line, enabled, Vendor ffffffff, Model ffffffff, S/N ffffffff, Unit 3, Rotation 0
    UUID 0xffffffffffffffffffffffffffffffff
    28/01/14 21:32:44,784 WindowServer[95]: Display 0x003f003c: GL mask 0x1; bounds (2945, 0)[1 x 1], 1 modes available
    off-line, enabled, Vendor ffffffff, Model ffffffff, S/N ffffffff, Unit 0, Rotation 0
    UUID 0xffffffffffffffffffffffffffffffff
    28/01/14 21:32:44,784 WindowServer[95]: Display 0x003f003d: GL mask 0x2; bounds (2946, 0)[1 x 1], 1 modes available
    off-line, enabled, Vendor ffffffff, Model ffffffff, S/N ffffffff, Unit 1, Rotation 0
    UUID 0xffffffffffffffffffffffffffffffff
    28/01/14 21:32:44,785 WindowServer[95]: CGXPerformInitialDisplayConfiguration
    28/01/14 21:32:44,785 WindowServer[95]:   Display 0x08c413e6: Unit 2; Vendor 0x5c23 Model 0x1040 S/N 997 Dimensions 11.54 x 6.50; online enabled, Bounds (0,0)[1920 x 1080], Rotation 0, Resolution 1
    28/01/14 21:32:44,785 WindowServer[95]:   Display 0x003f003f: Unit 3; Vendor 0xffffffff Model 0xffffffff S/N -1 Dimensions 0.00 x 0.00; offline enabled, Bounds (2944,0)[1 x 1], Rotation 0, Resolution 1
    28/01/14 21:32:44,785 WindowServer[95]:   Display 0x003f003c: Unit 0; Vendor 0xffffffff Model 0xffffffff S/N -1 Dimensions 0.00 x 0.00; offline enabled, Bounds (2945,0)[1 x 1], Rotation 0, Resolution 1
    28/01/14 21:32:44,785 WindowServer[95]:   Display 0x003f003d: Unit 1; Vendor 0xffffffff Model 0xffffffff S/N -1 Dimensions 0.00 x 0.00; offline enabled, Bounds (2946,0)[1 x 1], Rotation 0, Resolution 1
    28/01/14 21:32:44,800 WindowServer[95]: GLCompositor: GL renderer id 0x01024400, GL mask 0x0000000f, accelerator 0x0000344b, unit 0, caps QEX|MIPMAP, vram 1024 MB
    28/01/14 21:32:44,800 WindowServer[95]: GLCompositor: GL renderer id 0x01024400, GL mask 0x0000000f, texture max 16384, viewport max {16384, 16384}, extensions FPRG|NPOT|GLSL|FLOAT
    28/01/14 21:32:44,800 WindowServer[95]: GLCompositor enabled for tile size [256 x 256]
    28/01/14 21:32:44,800 WindowServer[95]: CGXGLInitMipMap: mip map mode is on
    28/01/14 21:32:44,815 loginwindow[43]: **DMPROXY** Found `/System/Library/CoreServices/DMProxy'.
    28/01/14 21:32:44,000 kernel[0]: flow_divert_kctl_disconnect (0): disconnecting group 1
    28/01/14 21:32:45,012 WindowServer[95]: Display 0x08c413e6: Unit 2; ColorProfile { 2, "HD 709-A"}; TransferFormula (1.000000, 1.000000, 1.000000)
    28/01/14 21:32:45,031 launchctl[230]: com.apple.findmymacmessenger: Already loaded
    28/01/14 21:32:45,048 com.apple.SecurityServer[14]: Session 100005 created
    28/01/14 21:32:45,088 UserEventAgent[231]: Failed to copy info dictionary for bundle /System/Library/UserEventPlugins/alfUIplugin.plugin
    28/01/14 21:32:45,220 loginwindow[43]: Login Window Started Security Agent
    28/01/14 21:32:45,357 SecurityAgent[239]: This is the first run
    28/01/14 21:32:45,357 SecurityAgent[239]: MacBuddy was run = 0
    28/01/14 21:32:45,372 WindowServer[95]: MPAccessSurfaceForDisplayDevice: Set up page flip mode on display 0x08c413e6 device: 0x7fabe060af00  isBackBuffered: 1 numComp: 3 numDisp: 3
    28/01/14 21:32:45,372 WindowServer[95]: _CGXGLDisplayContextForDisplayDevice: acquired display context (0x7fabe060af00) - enabling OpenGL
    28/01/14 21:32:45,000 kernel[0]: hfs: mounted CRYX on device disk1s2
    28/01/14 21:32:45,916 awacsd[60]: Exiting
    28/01/14 21:32:46,000 kernel[0]: hfs: unmount initiated on CRYX on device disk1s2
    28/01/14 21:32:46,046 com.apple.launchd[1]: System: Could not find requested session: Aqua
    28/01/14 21:32:46,047 TabletDriver[236]: com.wacom.Wacom_TouchDriver.51248: Invalid argument
    28/01/14 21:32:46,733 TabletDriver[236]: Finish launching /Library/Application Support/Tablet/WacomTabletDriver.app/Contents/Resources/WacomTouchDriver.app
    28/01/14 21:32:46,739 com.apple.launchd[1]: System: Could not find requested session: Aqua
    28/01/14 21:32:46,739 TabletDriver[236]: com.wacom.TabletDriver.51424: Invalid argument
    28/01/14 21:32:46,777 WindowServer[95]: **DMPROXY** (2) Found `/System/Library/CoreServices/DMProxy'.
    28/01/14 21:32:46,794 WindowServer[95]: Display 0x08c413e6: Unit 2; ColorProfile { 2, "HD 709-A"}; TransferFormula (1.000000, 1.000000, 1.000000)
    28/01/14 21:32:46,822 WindowServer[95]: Display 0x08c413e6: Unit 2; ColorProfile { 2, "HD 709-A"}; TransferFormula (1.000000, 1.000000, 1.000000)
    28/01/14 21:32:47,744 TabletDriver[236]: Finish launching /Library/Application Support/Tablet/WacomTabletDriver.app/Contents/Resources/TabletDriver.app
    28/01/14 21:32:51,638 UserEventAgent[11]: Captive: [CNInfoNetworkActive:1655] en1: SSID 'cryxnet' making interface primary (protected network)
    28/01/14 21:32:51,638 configd[18]: network changed: DNS* Proxy
    28/01/14 21:32:51,639 UserEventAgent[11]: Captive: CNPluginHandler en1: Evaluating
    28/01/14 21:32:51,640 UserEventAgent[11]: Captive: en1: Probing 'cryxnet'
    28/01/14 21:32:51,644 configd[18]: network changed: v4(en1!:192.168.250.103) DNS+ Proxy+ SMB
    28/01/14 21:32:52,240 UserEventAgent[11]: Captive: CNPluginHandler en1: Authenticated
    28/01/14 21:32:52,634 ntpd[118]: proto: precision = 1.000 usec
    28/01/14 21:33:28,000 kernel[0]: **** [IOBluetoothHostControllerUSBTransport][SuspendDevice] -- Suspend -- suspendDeviceCallResult = 0x0000 (kIOReturnSuccess) -- 0xb800 ****
    28/01/14 21:34:02,833 distnoted[278]: # distnote server agent  absolute time: 124.156553028   civil time: Tue Jan 28 21:34:02 2014   pid: 278 uid: 501  root: no
    28/01/14 21:34:02,834 distnoted[278]: assertion failed: 13B42: liblaunch.dylib + 25164 [FCBF0A02-0B06-3F97-9248-5062A9DEB32C]: 0x25
    28/01/14 21:34:04,965 com.apple.SecurityServer[14]: Session 100007 created
    28/01/14 21:34:06,001 WindowServer[95]: Received display connect changed for display 0x3f003c
    28/01/14 21:34:06,001 WindowServer[95]: Found 1 modes for display 0x003f003c [1, 0]
    28/01/14 21:34:06,001 WindowServer[95]: Received display connect changed for display 0x3f003d
    28/01/14 21:34:06,002 WindowServer[95]: Found 1 modes for display 0x003f003d [1, 0]
    28/01/14 21:34:06,002 WindowServer[95]: Received display connect changed for display 0x8c413e6
    28/01/14 21:34:06,002 WindowServer[95]: Found 1 modes for display 0x08c413e6 [1, 0]
    28/01/14 21:34:06,002 WindowServer[95]: Display 0x08c413e6 changed state to offline
    28/01/14 21:34:06,003 WindowServer[95]: No display devices are on-line. Switching to virtual display mode
    28/01/14 21:34:06,215 WindowServer[95]: Display 0x41dc9d03: GL mask 0x8; bounds (0, 0)[1280 x 1024], 2 modes available
    off-line, enabled, built-in, Vendor 756e6b6e, Model 76697274, S/N 0, Unit 3, Rotation 0
    UUID 0xffffffffffffffffffffffffffffffff
    28/01/14 21:34:06,215 WindowServer[95]: Display 0x41dc9d00: GL mask 0x1; bounds (0, 0)[1280 x 1024], 2 modes available
    off-line, enabled, built-in, Vendor 756e6b6e, Model 76697274, S/N 0, Unit 0, Rotation 0
    UUID 0xffffffffffffffffffffffffffffffff
    28/01/14 21:34:06,215 WindowServer[95]: Display 0x41dc9d01: GL mask 0x2; bounds (0, 0)[1280 x 1024], 2 modes available
    off-line, enabled, built-in, Vendor 756e6b6e, Model 76697274, S/N 0, Unit 1, Rotation 0
    UUID 0xffffffffffffffffffffffffffffffff
    28/01/14 21:34:06,216 WindowServer[95]: Display 0x41dc9d02: GL mask 0x4; bounds (0, 0)[1920 x 1080], 25 modes available
    Main, Active, on-line, enabled, built-in, Vendor 756e6b6e, Model 76697274, S/N 0, Unit 2, Rotation 0
    UUID 0xab86e364b8291c1af0133542500a565c
    28/01/14 21:34:06,218 WindowServer[95]: Display added
    28/01/14 21:34:06,218 WindowServer[95]: Display removed
    28/01/14 21:34:06,219 WindowServer[95]: Display 0x41dc9d02: GL mask 0x4; bounds (0, 0)[1920 x 1080], 25 modes available
    Main, Active, on-line, enabled, built-in, Vendor 756e6b6e, Model 76697274, S/N 0, Unit 2, Rotation 0
    UUID 0xab86e364b8291c1af0133542500a565c
    28/01/14 21:34:06,219 WindowServer[95]: Display 0x41dc9d03: GL mask 0x8; bounds (2944, 0)[1 x 1], 2 modes available
    off-line, enabled, built-in, Vendor 756e6b6e, Model 76697274, S/N 0, Unit 3, Rotation 0
    UUID 0xffffffffffffffffffffffffffffffff
    28/01/14 21:34:06,219 WindowServer[95]: Display 0x41dc9d00: GL mask 0x1; bounds (2945, 0)[1 x 1], 2 modes available
    off-line, enabled, built-in, Vendor 756e6b6e, Model 76697274, S/N 0, Unit 0, Rotation 0
    UUID 0xffffffffffffffffffffffffffffffff
    28/01/14 21:34:06,220 WindowServer[95]: Display 0x41dc9d01: GL mask 0x2; bounds (2946, 0)[1 x 1], 2 modes available
    off-line, enabled, built-in, Vendor 756e6b6e, Model 76697274, S/N 0, Unit 1, Rotation 0
    UUID 0xffffffffffffffffffffffffffffffff
    28/01/14 21:34:06,000 kernel[0]: EDID CEA Extensions not valid for audio [Detailed Timing Descriptor Count & Attributes]: 0xFFFFFFB0 (bit 6 is false)
    28/01/14 21:34:06,554 WindowServer[95]: Received display connect changed for display 0x3f003c
    28/01/14 21:34:06,555 WindowServer[95]: Found 1 modes for display 0x003f003c [1, 0]
    28/01/14 21:34:06,555 WindowServer[95]: Received display connect changed for display 0x3f003d
    28/01/14 21:34:06,555 WindowServer[95]: Found 1 modes for display 0x003f003d [1, 0]
    28/01/14 21:34:06,555 WindowServer[95]: Received display connect changed for display 0x3f003e
    28/01/14 21:34:06,557 WindowServer[95]: Found 18 modes for display 0x003f003e [12, 6]
    28/01/14 21:34:06,557 WindowServer[95]: Display 0x003f003e changed state to online
    28/01/14 21:34:06,579 WindowServer[95]: New display device coming on-line. Switching from virtual display mode
    28/01/14 21:34:06,621 WindowServer[95]: Display 0x003f003f: GL mask 0x8; bounds (2944, 0)[1 x 1], 2 modes available
    off-line, enabled, Vendor ffffffff, Model ffffffff, S/N ffffffff, Unit 3, Rotation 0
    UUID 0xffffffffffffffffffffffffffffffff
    28/01/14 21:34:06,622 WindowServer[95]: _CGXGLDisplayContextForDisplayDevice: acquired display context (0x7fabe05157b0) - enabling OpenGL
    28/01/14 21:34:06,622 WindowServer[95]: GLCompositor: GL renderer id 0x01024400, GL mask 0x0000000f, accelerator 0x0000344b, unit 0, caps QEX|MIPMAP, vram 1024 MB
    texture max 16384, viewport max {16384, 16384}, extensions FPRG|NPOT|GLSL|FLOAT
    28/01/14 21:34:06,622 WindowServer[95]: Display 0x003f003c: GL mask 0x1; bounds (2945, 0)[1 x 1], 1 modes available
    off-line, enabled, Vendor ffffffff, Model ffffffff, S/N ffffffff, Unit 0, Rotation 0
    UUID 0xffffffffffffffffffffffffffffffff
    28/01/14 21:34:06,622 WindowServer[95]: Display 0x003f003d: GL mask 0x2; bounds (2946, 0)[1 x 1], 1 modes available
    off-line, enabled, Vendor ffffffff, Model ffffffff, S/N ffffffff, Unit 1, Rotation 0
    UUID 0xffffffffffffffffffffffffffffffff
    28/01/14 21:34:06,622 WindowServer[95]: Display 0x08c413e6: GL mask 0x4; bounds (0, 0)[1920 x 1080], 18 modes available
    Main, Active, on-line, enabled, boot, OpenGL-accel, Vendor 5c23, Model 1040, S/N 3e5, Unit 2, Rotation 0
    UUID 0xab86e364b8291c1af0133542500a565c, ColorProfile { 2, "HD 709-A"}
    28/01/14 21:34:06,623 WindowServer[95]: GLCompositor: GL renderer id 0x01024400, GL mask 0x0000000f, accelerator 0x0000344b, unit 0, caps QEX|MIPMAP, vram 1024 MB
    texture max 16384, viewport max {16384, 16384}, extensions FPRG|NPOT|GLSL|FLOAT
    28/01/14 21:34:06,873 WindowServer[95]: CGError post_notification(const CGSNotificationType, void *const, const size_t, const bool, const CGSRealTimeDelta, const int, const CGSConnectionID *const, const pid_t): Timed out 0.250 second wait for reply from "SecurityAgent" for synchronous notification type 100 (kCGSDisplayWillReconfigure) (CID 0x9003, PID 239)
    28/01/14 21:34:06,876 WindowServer[95]: Display added
    28/01/14 21:34:06,876 WindowServer[95]: Display removed
    28/01/14 21:34:06,876 WindowServer[95]: Display 0x08c413e6: GL mask 0x4; bounds (0, 0)[1920 x 1080], 18 modes available
    Main, Active, on-line, enabled, boot, OpenGL-accel, Vendor 5c23, Model 1040, S/N 3e5, Unit 2, Rotation 0
    UUID 0xab86e364b8291c1af0133542500a565c, ColorProfile { 2, "HD 709-A"}
    28/01/14 21:34:06,877 WindowServer[95]: GLCompositor: GL renderer id 0x01024400, GL mask 0x0000000f, accelerator 0x0000344b, unit 0, caps QEX|MIPMAP, vram 1024 MB
    texture max 16384, viewport max {16384, 16384}, extensions FPRG|NPOT|GLSL|FLOAT
    28/01/14 21:34:06,877 WindowServer[95]: Display 0x003f003f: GL mask 0x8; bounds (2944, 0)[1 x 1], 2 modes available
    off-line, enabled, OpenGL-accel, Vendor ffffffff, Model ffffffff, S/N ffffffff, Unit 3, Rotation 0
    UUID 0xffffffffffffffffffffffffffffffff
    28/01/14 21:34:06,877 WindowServer[95]: GLCompositor: GL renderer id 0x01024400, GL mask 0x0000000f, accelerator 0x0000344b, unit 0, caps QEX|MIPMAP, vram 1024 MB
    texture max 16384, viewport max {16384, 16384}, extensions FPRG|NPOT|GLSL|FLOAT
    28/01/14 21:34:06,877 WindowServer[95]: Display 0x003f003c: GL mask 0x1; bounds (2945, 0)[1 x 1], 1 modes available
    off-line, enabled, Vendor ffffffff, Model ffffffff, S/N ffffffff, Unit 0, Rotation 0
    UUID 0xffffffffffffffffffffffffffffffff
    28/01/14 21:34:06,877 WindowServer[95]: Display 0x003f003d: GL mask 0x2; bounds (2946, 0)[1 x 1], 1 modes available
    off-line, enabled, Vendor ffffffff, Model ffffffff, S/N ffffffff, Unit 1, Rotation 0
    UUID 0xffffffffffffffffffffffffffffffff
    28/01/14 21:34:07,000 kernel[0]: considerRebuildOfPrelinkedKernel com.apple.driver.AppleUSBCDC triggered rebuild
    28/01/14 21:34:07,341 com.apple.kextd[12]: kext com.silabs.driver.CP210xVCPDriver  300001001 is in exception list, allowing to load
    28/01/14 21:34:07,342 com.apple.kextd[12]: Can't load /System/Library/Extensions/SiLabsUSBDriver.kext - no code for running kernel's architecture.
    28/01/14 21:34:07,344 com.apple.kextd[12]: Load com.silabs.driver.CP210xVCPDriver failed; removing personalities from kernel.
    28/01/14 21:34:07,352 com.apple.kextd[12]: Kext id com.apple.kernel.iokit not found; removing personalities from kernel.
    28/01/14 21:34:07,352 com.apple.kextd[12]: String/URL conversion failure.
    28/01/14 21:34:07,934 com.apple.kextd[12]: kext com.silabs.driver.CP210xVCPDriver64  300001001 is in exception list, allowing to load
    28/01/14 21:34:08,000 kernel[0]: com_silabs_driver_CP210xVCPDriver: init
    28/01/14 21:34:08,000 kernel[0]: com_silabs_driver_CP210xVCPDriver64(0xffffff8023ad4000)::attach
    28/01/14 21:34:08,000 kernel[0]: com_silabs_driver_CP210xVCPDriver64(0xffffff8023ad4000)::probe
    28/01/14 21:34:08,000 kernel[0]: com_silabs_driver_CP210xVCPDriver64(0xffffff8023ad4000)::detach
    28/01/14 21:34:08,000 kernel[0]: com_silabs_driver_CP210xVCPDriver64(0xffffff8023ad4000)::attach
    28/01/14 21:34:08,000 kernel[0]: com_silabs_driver_CP210xVCPDriver64(0xffffff8023ad4000)::start - Registered for Power Management
    28/01/14 21:34:08,000 kernel[0]: com_silabs_driver_CP210xVCPDriver64(0xffffff8023ad4000)::start!
    28/01/14 21:34:08,000 kernel[0]: com_silabs_driver_CP210xVCPDriver64(0xffffff8023ad4000)::start - Found device at interface 0
    28/01/14 21:34:08,000 kernel[0]: com_silabs_driver_CP210xVCPDriver64(0xffffff8023ad4000)::SelectInterfaces - BulkInput Pipe is 0xffffff802187ca00 on EP1
    28/01/14 21:34:08,000 kernel[0]: com_silabs_driver_CP210xVCPDriver64(0xffffff8023ad4000)::SelectInterfaces - BulkOutput Pipe is 0xffffff8021767100 on EP1
    28/01/14 21:34:08,000 kernel[0]: com_silabs_driver_CP210xVCPDriver64(0xffffff8023ad4000)::setPowerState - Waking up
    28/01/14 21:34:08,000 kernel[0]: com_silabs_driver_CP210xVCPDriver64(0xffffff8023ad4000)::GetCP210xInfo - Part Number Found: 0x02
    28/01/14 21:34:08,000 kernel[0]: com_silabs_driver_CP210xVCPDriver64(0xffffff8023ad4000)::GetCP210xInfo - UsbConfigurationDescriptor -
    28/01/14 21:34:08,000 kernel[0]: com_silabs_driver_CP210xVCPDriver64(0xffffff8023ad4000)::GetCP210xInfo     .bLength = 9
    28/01/14 21:34:08,000 kernel[0]: com_silabs_driver_CP210xVCPDriver64(0xffffff8023ad4000)::GetCP210xInfo     .bDescriptorType = 0x02
    28/01/14 21:34:08,000 kernel[0]: com_silabs_driver_CP210xVCPDriver64(0xffffff8023ad4000)::GetCP210xInfo     .wTotalLength = 32
    28/01/14 21:34:08,000 kernel[0]: com_silabs_driver_CP210xVCPDriver64(0xffffff8023ad4000)::GetCP210xInfo     .bNumInterfaces = 1
    28/01/14 21:34:08,000 kernel[0]: com_silabs_driver_CP210xVCPDriver64(0xffffff8023ad4000)::GetCP210xInfo     .bConfigurationValue = 1
    28/01/14 21:34:08,000 kernel[0]: com_silabs_driver_CP210xVCPDriver64(0xffffff8023ad4000)::GetCP210xInfo     .iConfiguration = 0
    28/01/14 21:34:08,000 kernel[0]: com_silabs_driver_CP210xVCPDriver64(0xffffff8023ad4000)::GetCP210xInfo     .bmAttributes = 0x80
    28/01/14 21:34:08,000 kernel[0]: com_silabs_driver_CP210xVCPDriver64(0xffffff8023ad4000)::GetCP210xInfo     .MaxPower = 50
    28/01/14 21:34:08,000 kernel[0]: com_silabs_driver_CP210xVCPDriver64(0xffffff8023ad4000)::start - Sucessfully loaded the driver
    28/01/14 21:34:08,219 WindowServer[95]: **DMPROXY** (2) Found `/System/Library/CoreServices/DMProxy'.
    28/01/14 21:34:08,241 WindowServer[95]: Display 0x08c413e6: Unit 2; ColorProfile { 2, "HD 709-A"}; TransferFormula (1.000000, 1.000000, 1.000000)
    28/01/14 21:34:08,252 WindowServer[95]: Display 0x08c413e6: Unit 2; ColorProfile { 2, "HD 709-A"}; TransferFormula (1.000000, 1.000000, 1.000000)
    28/01/14 21:34:08,581 WindowServer[95]: **DMPROXY** (2) Found `/System/Library/CoreServices/DMProxy'.
    28/01/14 21:34:08,603 WindowServer[95]: Display 0x08c413e6: Unit 2; ColorProfile { 2, "HD 709-A"}; TransferFormula (1.000000, 1.000000, 1.000000)
    28/01/14 21:34:08,629 WindowServer[95]: Display 0x08c413e6: Unit 2; ColorProfile { 2, "HD 709-A"}; TransferFormula (1.000000, 1.000000, 1.000000)
    28/01/14 21:34:08,877 WindowServer[95]: **DMPROXY** (2) Found `/System/Library/CoreServices/DMProxy'.
    28/01/14 21:34:08,900 WindowServer[95]: Display 0x08c413e6: Unit 2; ColorProfile { 2, "HD 709-A"}; TransferFormula (1.000000, 1.000000, 1.000000)
    28/01/14 21:34:08,926 WindowServer[95]: Display 0x08c413e6: Unit 2; ColorProfile { 2, "HD 709-A"}; TransferFormula (1.000000, 1.000000, 1.000000)
    28/01/14 21:34:15,229 WindowServer[95]: MPAccessSurfaceForDisplayDevice: Set up page flip mode on display 0x08c413e6 device: 0x7fabe060af00  isBackBuffered: 1 numComp: 3 numDisp: 3
    28/01/14 21:34:16,941 sandboxd[112]: ([290]) mdworker(290) deny file-read-data /
    28/01/14 21:34:17,000 kernel[0]: en1: BSSID changed to 00:13:33:a9:24:9e
    28/01/14 21:34:17,785 airportd[64]: _doAutoJoin: Already associated to “cryxnet”. Bailing on auto-join.
    28/01/14 21:34:18,000 kernel[0]: com_silabs_driver_CP210xVCPDriver64::setPowerState(0x5f396ce2a7b370ff, 0 -> 1) timed out after 10181 ms
    28/01/14 21:34:20,483 com.apple.SecurityServer[14]: Session 100009 created
    28/01/14 21:34:22,000 kernel[0]: MacAuthEvent en1   Auth result for: 00:13:33:a9:24:9e  MAC AUTH succeeded
    28/01/14 21:34:22,000 kernel[0]: wlEvent: en1 en1 Link UP virtIf = 0
    28/01/14 21:34:22,000 kernel[0]: AirPort: RSN handshake complete on en1
    28/01/14 21:34:22,000 kernel[0]: wl0: Roamed or switched channel, reason #0, bssid 00:13:33:a9:24:9e
    28/01/14 21:34:22,000 kernel[0]: en1: BSSID changed to 00:13:33:a9:24:9e
    28/01/14 21:34:23,000 kernel[0]: [IOAppleBluetoothHIDDriver][waitForHandshake][0c-fc-83-81-15-de] Timeout waiting for handshake
    28/01/14 21:34:23,000 kernel[0]: [IOAppleBluetoothHIDDriver][getExtendedReport] getReport returned error e00002c7
    28/01/14 21:34:23,000 kernel[0]: [IOAppleBluetoothHIDDriver][updateBatteryLevel] Couldn't get battery percentage from device
    28/01/14 21:34:25,362 com.apple.kextcache[285]: kext org.virtualbox.kext.VBoxUSB  402169000 is in exception list, allowing to load
    28/01/14 21:34:25,572 com.apple.kextcache[285]: kext org.virtualbox.kext.VBoxDrv  402169000 is in exception list, allowing to load
    28/01/14 21:34:33,336 com.apple.kextcache[285]: kext com.wacom.kext.wacomtablet  603059000 is in exception list, allowing to load
    28/01/14 21:34:33,711 com.apple.kextcache[285]: kext com.silabs.driver.CP210xVCPDriver64  300001001 is in exception list, allowing to load
    28/01/14 21:34:33,844 com.apple.kextcache[285]: kext com.jmicron.JMicronATA  101069000 is in exception list, allowing to load
    28/01/14 21:34:38,782 com.apple.kextcache[285]: kext com.ATTO.driver.ATTOExpressSASRAID  307029000 is in exception list, allowing to load
    28/01/14 21:34:38,808 com.apple.kextcache[285]: kext com.ATTO.driver.ATTOExpressSASHBA3  100059000 is in exception list, allowing to load
    28/01/14 21:34:38,825 com.apple.kextcache[285]: kext com.ATTO.driver.ATTOExpressSASHBA  200009000 is in exception list, allowing to load
    28/01/14 21:34:38,835 com.apple.kextcache[285]: kext com.ATTO.driver.ATTOExpressPCIUl4  404029000 is in exception list, allowing to load
    28/01/14 21:34:38,862 com.apple.kextcache[285]: kext com.ATTO.driver.ATTOCelerityFC  304089000 is in exception list, allowing to load
    28/01/14 21:34:42,365 com.apple.kextcache[285]: kext com.Accusys.driver.Acxxx  300029000 is in exception list, allowing to load
    28/01/14 21:34:42,393 com.apple.kextcache[285]: kext org.virtualbox.kext.VBoxUSB  402169000 is in exception list, allowing to load
    28/01/14 21:34:42,444 com.apple.kextcache[285]: kext org.virtualbox.kext.VBoxDrv  402169000 is in exception list, allowing to load
    28/01/14 21:34:57,408 com.apple.kextcache[285]: Created prelinked kernel /System/Library/Caches/com.apple.kext.caches/Startup/kernelcache.
    28/01/14 21:35:18,000 kernel[0]: [IOAppleBluetoothHIDDriver][getExtendedReport] getReport returned error e00002c7
    28/01/14 21:35:18,000 kernel[0]: [IOAppleBluetoothHIDDriver][updateBatteryLevel] Couldn't get battery percentage from device
    28/01/14 21:35:47,615 com.apple.audio.DriverHelper[298]: The plug-in named AirPlay.driver requires extending the sandbox for the IOKit user-client class AMDRadeonX4000_AMDAccelDevice.
    28/01/14 21:35:47,615 com.apple.audio.DriverHelper[298]: The plug-in named AirPlay.driver requires extending the sandbox for the IOKit user-client class AMDRadeonX4000_AMDAccelSharedUserClient.
    28/01/14 21:35:47,615 com.apple.audio.DriverHelper[298]: The plug-in named AirPlay.driver requires extending the sandbox for the IOKit user-client class AMDSIVideoContext.
    28/01/14 21:35:47,615 com.apple.audio.DriverHelper[298]: The plug-in named AirPlay.driver requires extending the sandbox for the IOKit user-client class IGAccelDevice.
    28/01/14 21:35:47,615 com.apple.audio.DriverHelper[298]: The plug-in named AirPlay.driver requires extending the sandbox for the IOKit user-client class IGAccelSharedUserClient.
    28/01/14 21:35:47,615 com.apple.audio.DriverHelper[298]: The plug-in named AirPlay.driver requires extending the sandbox for the IOKit user-client class IGAccelVideoContextMain.
    28/01/14 21:35:47,616 com.apple.audio.DriverHelper[298]: The plug-in named AirPlay.driver requires extending the sandbox for the IOKit user-client class IGAccelVideoContextMedia.
    28/01/14 21:35:47,616 com.apple.audio.DriverHelper[298]: The plug-in named AirPlay.driver requires extending the sandbox for the IOKit user-client class IGAccelVideoContextVEBox.
    28/01/14 21:35:47,616 com.apple.audio.DriverHelper[298]: The plug-in named AirPlay.driver requires extending the sandbox for the IOKit user-client class IOHIDParamUserClient.
    28/01/14 21:35:47,616 com.apple.audio.DriverHelper[298]: The plug-in named AirPlay.driver requires extending the sandbox for the IOKit user-client class IOSurfaceRootUserClient.
    28/01/14 21:35:47,616 com.apple.audio.DriverHelper[298]: The plug-in named AirPlay.driver requires extending the sandbox for the IOKit user-client class Gen6DVDContext.
    28/01/14 21:35:47,616 com.apple.audio.DriverHelper[298]: The plug-in named AirPlay.driver requires extending the sandbox for the mach service named com.apple.AirPlayXPCHelper.
    28/01/14 21:35:47,633 com.apple.audio.DriverHelper[298]: The plug-in named BluetoothAudioPlugIn.driver requires extending the sandbox for the IOKit user-client class IOBluetoothDeviceUserClient.
    28/01/14 21:35:47,633 com.apple.audio.DriverHelper[298]: The plug-in named BluetoothAudioPlugIn.driver requires extending the sandbox for the mach service named com.apple.blued.
    28/01/14 21:35:47,633 com.apple.audio.DriverHelper[298]: The plug-in named BluetoothAudioPlugIn.driver requires extending the sandbox for the mach service named com.apple.bluetoothaudiod.
    28/01/14 21:36:28,390 mds[39]: (Normal) Volume: volume:0x7f9bbd090000 ********** Bootstrapped Creating a default store:0 SpotLoc:(null) SpotVerLoc:(null) occlude:0 /Volumes/firmwaresyncd.jBR7Zi

  • Color switches to a black and white screen after login

    iMac 700MHZ Graphite 10.3.9 color issue. When I am logging in the screen is in color but after login when it switches to my desktop the color also switches to a black and white screen. The other user of this computer does not have any problem with the color on his desktop. Has anyone run into this problem before? Any help would be greatly appreciated.
    Thank You
    DP

    Go to System Preferences>Universal Access, the 'Seeing' pane and uncheck 'use greyscale'.

  • How do i get out of white screen after login

    How do i get out of the white screen after signing on to my computer.

    Hi GregConk, 
    Thank you for visiting Apple Support Communities.
    If I understand right, your iMac is only starting up to a blank white screen after you log in. If so, there are some good troubleshooting steps that may resolve this behavior. 
    First, try booting your computer into Safe Mode, to see if your desktop appears in this mode:
    Shut down your Mac. If necessary, hold your Mac's power button for several seconds to force it to power down.
    Start your Mac, then immediately hold the Shift key. This performs a Safe Boot. Advanced tip: If you want to see the status of a Safe Boot as it progresses, you can hold Shift-Command-V during start up (instead of just Shift). 
    Note: A Safe Boot takes longer than a typical start up because it includes a disk check and other operations.
    If your Mac starts up as expected, immediately try restarting.
    From:
    Mac OS X: Gray screen appears during startup - Apple Support
    If you see your desktop in Safe Mode, but not when starting up normally, try the troubleshooting tips in this article next:
    OS X Yosemite: If you think you have incompatible login items
    Best Regards,
    Jeremy

  • My mac book pro retina has white screen after login in both users !!!! Don't know what to do

    It was working fine till night.
    Next morning I tried to log in and white screen appears. Cant see anything except cursor.
    I have been getting message of " start up disk is full" from last week or so.
    Please let me know if anybody knows how to resolve it!!!
    Thanks

    Welcome to Apple Support Communities
    You need more free storage. If your Mac is frozen, hold the Power button until it turns off.
    Then, hold the Shift key while your Mac is starting to start in safe mode. Safe mode will allow you to access into Mac OS X and delete or move data, so you can use Mac OS X in normal mode again.
    After logging in, the only thing you have to do is to look for files in your user's folders and delete or move them to an external drive. You can also see what categories are taking more space in  > About this Mac > More Info > Storage.
    When you have finished, restart and see if you can log in

  • MacBook Air shows white screen at login

    When I turn my MacBook on, it shows my login and lets me choose a user. I type in my password, and it freezes for a while, tells me I "shut down my computer because of a problem," then the screen goes white. I've tried flashing the PRAM, restarting it over and over again, nothing seems to work. It's still responsive, I can move my cursor around and if I press the power button, the little menu shows up.

    Hello anneliserenee,
    Thanks for using Apple Support Communities.
    For more information on this, take a look at:
    OS X: About kernel panics
    http://support.apple.com/kb/TS3742
    Best of luck,
    Mario

  • MacBook Pro mid 2013 13' gets stuck on White screen after login.

    I'm in safe mode right now. I Booted it up in Safe Mode by holding down the shift key during startup. What do I do now to not get the white/grey screen during startup after login?

    Mac OS X: Gray screen appears during startup
    If the grey screen occurs when you boot normally (not safe mode) try bypassing your Login Items by holding a Shift key in the same manner during login (i.e. not during boot). If you can log in, you effectively isolated the problem to one of more of your Login Items.

  • Getting all white screen after login

    I log into my MacBook Pro & am getting an all white/grey screen, no transition to home screen. Any idea as to what the issue is?

    Monkeyknfefight,
    it might be a filesystem problem. Which model MacBook Pro do you have, and which version of OS X is installed on it?

  • Blank white screen after login prompt on sharepoint site

    Greetings all
    We have sharepoint site setup which is running fien since a year  now with one WFE  web server, db server, ad  server
    We received  a problm recently when we received blank screen after entering login details.
    Upon restart of website via IIS  it resumed.
    I am still finding what are causes and which event log would help to identify errors?

    We couldnt schedule this to be on and waited for weekned.
    However we again had same incident reported 8 am cst and found that event log has similar warning ( time approx 6 am cst).
    Cleared sharepoint timer cache.
    started sharepoint timer service again .
    still website didnt show contents after authenticating.
    stopped website in IIS   mapped to this web application and site contents started showing up.
    is there anything else we need to enable in sharepoint logging to find  root causes.
    We have pending windows updates on server , should that be causing any of these errors?
    Log Name:      Application
    Source:        Microsoft-SharePoint Products-Web Content Management
    Date:          11/7/2014 5:45:04 AM
    Event ID:      7362
    Task Category: Publishing Cache
    Level:         Information
    Keywords:      
    User:          domain\spapppool
    Computer:      WFE01
    Description:
    Object Cache: The super user account utilized by the cache is not configured. This can increase the number of cache misses, which causes the page requests to consume unneccesary system resources.
     To configure the account use the following command 'stsadm -o setproperty -propertyname portalsuperuseraccount -propertyvalue account -url webappurl'. The account should be any account that has Full Control access to the SharePoint databases but is not
    an application pool account.
     Additional Data:
     Current default super user account: SHAREPOINT\system
    Event Xml:
    <Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
      <System>
        <Provider Name="Microsoft-SharePoint Products-Web Content Management" Guid="{0119F589-72D7-4EC3-ADF5-1F082061E832}" />
        <EventID>7362</EventID>
        <Version>15</Version>
        <Level>4</Level>
        <Task>1</Task>
        <Opcode>0</Opcode>
        <Keywords>0x4000000000000000</Keywords>
        <TimeCreated SystemTime="2014-11-07T11:45:04.442428600Z" />
        <EventRecordID>319506</EventRecordID>
        <Correlation ActivityID="{F2C3C99C-8E0F-60CD-507E-90CCC8B23C6A}" />
        <Execution ProcessID="12700" ThreadID="6472" />
        <Channel>Application</Channel>
        <Computer>WFE01</Computer>
        <Security UserID="S-1-5-21-521425033-3276028114-1354584634-1109" />
      </System>
      <EventData>
        <Data Name="string0">SHAREPOINT\system</Data>
      </EventData>
    </Event>
    Log Name:      Application
    Source:        Microsoft-SharePoint Products-SharePoint Foundation
    Date:          11/7/2014 5:45:09 AM
    Event ID:      7043
    Task Category: Web Controls
    Level:         Error
    Keywords:      
    User:          NT AUTHORITY\IUSR
    Computer:      WFE01
    Description:
    Load control template file /_controltemplates/15/ExcelWebRenderer.ascx failed: The type initializer for 'System.Net.WebUtility' threw an exception.
    Event Xml:
    <Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
      <System>
        <Provider Name="Microsoft-SharePoint Products-SharePoint Foundation" Guid="{6FB7E0CD-52E7-47DD-997A-241563931FC2}" />
        <EventID>7043</EventID>
        <Version>15</Version>
        <Level>2</Level>
        <Task>15</Task>
        <Opcode>0</Opcode>
        <Keywords>0x4000000000000000</Keywords>
        <TimeCreated SystemTime="2014-11-07T11:45:09.590620500Z" />
        <EventRecordID>319507</EventRecordID>
        <Correlation ActivityID="{F2C3C99C-8E0F-60CD-507E-90CCC8B23C6A}" />
        <Execution ProcessID="12700" ThreadID="6472" />
        <Channel>Application</Channel>
        <Computer>WFE01</Computer>
        <Security UserID="S-1-5-17" />
      </System>
      <EventData>
        <Data Name="string0">Load control template file /_controltemplates/15/ExcelWebRenderer.ascx failed: The type initializer for 'System.Net.WebUtility' threw an exception.</Data>
      </EventData>
    </Event>
    Log Name:      Application
    Source:        Microsoft-SharePoint Products-SharePoint Foundation
    Date:          11/7/2014 5:45:11 AM
    Event ID:      7043
    Task Category: Web Controls
    Level:         Error
    Keywords:      
    User:          NT AUTHORITY\IUSR
    Computer:      WFE01
    Description:
    Load control template file /_controltemplates/15/SlicerRendererControl.ascx failed: The type initializer for 'System.Net.WebUtility' threw an exception.
    Event Xml:
    <Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
      <System>
        <Provider Name="Microsoft-SharePoint Products-SharePoint Foundation" Guid="{6FB7E0CD-52E7-47DD-997A-241563931FC2}" />
        <EventID>7043</EventID>
        <Version>15</Version>
        <Level>2</Level>
        <Task>15</Task>
        <Opcode>0</Opcode>
        <Keywords>0x4000000000000000</Keywords>
        <TimeCreated SystemTime="2014-11-07T11:45:11.384687300Z" />
        <EventRecordID>319510</EventRecordID>
        <Correlation ActivityID="{F2C3C99C-8E0F-60CD-507E-90CCC8B23C6A}" />
        <Execution ProcessID="12700" ThreadID="6472" />
        <Channel>Application</Channel>
        <Computer>wFE01</Computer>
        <Security UserID="S-1-5-17" />
      </System>
      <EventData>
        <Data Name="string0">Load control template file /_controltemplates/15/SlicerRendererControl.ascx failed: The type initializer for 'System.Net.WebUtility' threw an exception.</Data>
      </EventData>
    </Event>
    Can you browse the below URLs
    http://sharepointfordummies.blogspot.in/2013/06/event-id-7362-super-user-account.html
    http://social.technet.microsoft.com/wiki/contents/articles/20699.sharepoint-2010-event-id-7362-the-super-user-account-utilized-by-the-cache-is-not-configured.aspx
    Thanks and Regards Rahul Dagar

  • [Solved] White screen after KDE 4.11.1 upgrade

    Hi!
    I updated the system going from KDE 4.11.0 to KDE 4.11.1. On reboot I got the correct loading of KDM, but upon arrival on the desktop the latter is presented fully white with big red button with an "X" in them. Thinking it was the configuration of kde, I deleted .kde4 with the effect that the next time I always white screen (that is only the red buttons have disappeared).
    I try to remove completely kde with:
    pacman -Rsnc kde
    and seeing that reinstalling I get the same result, I also tried to clean up the cache pacman packages listed by the command:
    ls kde*4.11.1*
    so I redownload and reinstalled with:
    pacman -Syu kde
    without solution. I also tried to do what is recommended in the wiki, that is in addition to eliminating .kde4, I run:
    $ rm ~/.config/Trolltech.conf
    $ kbuildsycoca4 --noincremental
    without solution.
    Thinking then it might be the partition / almost full, I checked with:
    df
    but the partition is not filled even for half of the 30gb that is available.
    I checked some logs and these are the outputs:
    .xsession-errors
    > http://pastebin.com/GESX81PV
    boot.log
    [[32m OK [0m] Started Load Kernel Modules.
    Mounting Configuration File System...
    [[32m OK [0m] Mounted Configuration File System.
    [[32m OK [0m] Found device SAMSUNG_SSD_830_Series.
    Mounting /Windows...
    Mounting FUSE Control File System...
    [[32m OK [0m] Mounted FUSE Control File System.
    [[32m OK [0m] Mounted /Windows.
    [[32m OK [0m] Found device WDC_WD10EALX-009BA0.
    Mounting /Dati...
    [[32m OK [0m] Mounted /Dati.
    [[32m OK [0m] Reached target Local File Systems.
    Starting Trigger Flushing of Journal to Persistent Storage...
    Starting Recreate Volatile Files and Directories...
    Starting Tell Plymouth To Write Out Runtime Data...
    [[32m OK [0m] Reached target Bluetooth.
    [[32m OK [0m] Started Trigger Flushing of Journal to Persistent Storage.
    [[32m OK [0m] Started Recreate Volatile Files and Directories.
    Starting Update UTMP about System Reboot/Shutdown...
    [[32m OK [0m] Started Update UTMP about System Reboot/Shutdown.
    [[32m OK [0m] Started Show Plymouth Boot Screen.
    [[32m OK [0m] Started Tell Plymouth To Write Out Runtime Data.
    [[32m OK [0m] Reached target System Initialization.
    [[32m OK [0m] Listening on CUPS Printing Service Sockets.
    [[32m OK [0m] Reached target Paths.
    [[32m OK [0m] Listening on D-Bus System Message Bus Socket.
    [[32m OK [0m] Reached target Sockets.
    [[32m OK [0m] Reached target Timers.
    Starting Restore Sound Card State...
    [[32m OK [0m] Reached target Basic System.
    Starting Network Manager...
    Starting CUPS Printing Service...
    [[32m OK [0m] Started CUPS Printing Service.
    Starting Catalyst's fglrx kernel' module builder...
    Starting Login Service...
    Starting D-Bus System Message Bus...
    [[32m OK [0m] Started D-Bus System Message Bus.
    Starting Permit User Sessions...
    [[32m OK [0m] Started Permit User Sessions.
    Starting Wait for Plymouth Boot Screen to Quit...
    Starting K Display Manager...
    [[32m OK [0m] Started K Display Manager.
    [[32m OK [0m] Started Catalyst's fglrx kernel' module builder.
    [[32m OK [0m] Reached target Sound Card.
    [[32m OK [0m] Started Restore Sound Card State.
    [[32m OK [0m] Started Login Service.
    Starting Manage, Install and Generate Color Profiles...
    Starting Authorization Manager...
    [[32m OK [0m] Started Manage, Install and Generate Color Profiles.
    [[32m OK [0m] Started Authorization Manager.
    [[32m OK [0m] Started Network Manager.
    [[32m OK [0m] Reached target Network.
    Starting Network Time Service...
    [[32m OK [0m] Started Network Time Service.
    [[0m[31m* [0m] A start job is running for Wait for Plymouth Boot Screen to Quit
    [K[[1;31m*[0m[31m* [0m] A start job is running for Wait for Plymouth Boot Screen to Quit
    [K[[31m*[1;31m*[0m[31m* [0m] A start job is running for Wait for Plymouth Boot Screen to Quit
    [K[ [31m*[1;31m*[0m[31m* [0m] A start job is running for Wait for Plymouth Boot Screen to Quit
    [K[ [31m*[1;31m*[0m[31m* [0m] A start job is running for Wait for Plymouth Boot Screen to Quit
    [K Starting Daemon for power management...
    [[32m OK [0m] Started Daemon for power management.
    Starting Disk Manager...
    [[32m OK [0m] Started Disk Manager.
    [ [31m*[1;31m*[0m[31m*[0m] A start job is running for Wait for Plymouth Boot Screen to Quit
    [K[[1;31mFAILED[0m] Failed to start Wait for Plymouth Boot Screen to Quit.
    See 'systemctl status plymouth-quit-wait.service' for details.
    Starting Getty on tty1...
    [[32m OK [0m] Started Getty on tty1.
    [[32m OK [0m] Reached target Login Prompts.
    [[32m OK [0m] Reached target Multi-User System.
    [[32m OK [0m] Reached target Graphical Interface.
    [[32m OK [0m] Stopped target Sound Card.
    [[32m OK [0m] Stopped target Bluetooth.
    Stopping Disk Manager...
    Stopping Daemon for power management...
    Stopping Authorization Manager...
    Stopping Manage, Install and Generate Color Profiles...
    Stopping CUPS Printing Service...
    [[32m OK [0m] Stopped target Graphical Interface.
    [[32m OK [0m] Stopped target Multi-User System.
    Stopping Network Time Service...
    Stopping Catalyst's fglrx kernel' module builder...
    Stopping Login Service...
    Stopping D-Bus System Message Bus...
    [[32m OK [0m] Stopped target Login Prompts.
    Stopping Getty on tty1...
    Stopping K Display Manager...
    [[32m OK [0m] Stopped K Display Manager.
    [[32m OK [0m] Stopped Daemon for power management.
    [[32m OK [0m] Stopped Getty on tty1.
    [[32m OK [0m] Stopped D-Bus System Message Bus.
    [[32m OK [0m] Stopped Disk Manager.
    Stopping Permit User Sessions...
    [[32m OK [0m] Stopped Authorization Manager.
    [[32m OK [0m] Stopped Network Time Service.
    [[32m OK [0m] Stopped target Network.
    Stopping Network Manager...
    [[32m OK [0m] Stopped Manage, Install and Generate Color Profiles.
    [[32m OK [0m] Stopped Catalyst's fglrx kernel' module builder.
    [[32m OK [0m] Stopped Login Service.
    [[32m OK [0m] Stopped Network Manager.
    [[32m OK [0m] Stopped CUPS Printing Service.
    [[32m OK [0m] Stopped Permit User Sessions.
    [[32m OK [0m] Stopped target Basic System.
    [[32m OK [0m] Stopped target Paths.
    [[32m OK [0m] Stopped target Timers.
    [[32m OK [0m] Stopped target Sockets.
    [[32m OK [0m] Closed CUPS Printing Service Sockets.
    [[32m OK [0m] Closed LVM2 metadata daemon socket.
    [[32m OK [0m] Closed /dev/initctl Compatibility Named Pipe.
    [[32m OK [0m] Closed Delayed Shutdown Socket.
    [[32m OK [0m] Closed Device-mapper event daemon FIFOs.
    [[32m OK [0m] Closed udev Control Socket.
    [[32m OK [0m] Closed D-Bus System Message Bus Socket.
    [[32m OK [0m] Stopped target System Initialization.
    Unmounting Debug File System...
    Unmounting FUSE Control File System...
    Stopping Update UTMP about System Reboot/Shutdown...
    Unmounting POSIX Message Queue File System...
    Unmounting Huge Pages File System...
    Stopping Setup Virtual Console...
    [[32m OK [0m] Stopped Setup Virtual Console.
    [[32m OK [0m] Unset automount Arbitrary Executable File Formats File System Automount Point.
    Stopping Apply Kernel Variables...
    [[32m OK [0m] Stopped Apply Kernel Variables.
    Unmounting Configuration File System...
    [[32m OK [0m] Stopped target Encrypted Volumes.
    [[32m OK [0m] Stopped target Swap.
    [[32m OK [0m] Stopped target Local File Systems.
    Unmounting /Windows...
    Unmounting /Dati...
    Unmounting Temporary Directory...
    Stopping Journal Service...
    [[32m OK [0m] Stopped target Remote File Systems.
    [[32m OK [0m] Stopped Update UTMP about System Reboot/Shutdown.
    [[32m OK [0m] Unmounted Temporary Directory.
    [[32m OK [0m] Unmounted POSIX Message Queue File System.
    [[32m OK [0m] Unmounted FUSE Control File System.
    [[32m OK [0m] Unmounted Huge Pages File System.
    [[32m OK [0m] Unmounted Configuration File System.
    Stopping Load Kernel Modules...
    [[32m OK [0m] Stopped Load Kernel Modules.
    [[32m OK [0m] Unmounted Debug File System.
    [[32m OK [0m] Unmounted /Windows.
    [[32m OK [0m] Unmounted /Dati.
    [[32m OK [0m] Reached target Unmount All Filesystems.
    [[32m OK [0m] Stopped target Local File Systems (Pre).
    Stopping Remount Root and Kernel File Systems...
    [[32m OK [0m] Stopped Remount Root and Kernel File Systems.
    [[32m OK [0m] Stopped Journal Service.
    [[32m OK [0m] Closed Journal Socket.
    Starting Show Plymouth Reboot Screen...
    Starting Store Sound Card State...
    Unmounting /...
    [[32m OK [0m] Started Store Sound Card State.
    [[32m OK [0m] Reached target Shutdown.
    Sending SIGTERM to remaining processes...
    Sending SIGKILL to remaining processes...
    Hardware watchdog 'iTCO_wdt', version 0
    Unmounting file systems.
    All filesystems unmounted.
    Deactivating swaps.
    All swaps deactivated.
    Detaching loop devices.
    All loop devices detached.
    Detaching DM devices.
    All DM devices detached.
    Storage is finalized.
    dmesg
    > http://pastebin.com/fbgh2ayu
    journalctl -p 3 --since=today
    -- Logs begin at mar 2013-07-30 13:16:10 CEST, end at lun 2013-09-16 08:52:14 CEST. --
    set 16 08:43:14 arch dhcpcd[346]: eno1: ipv6rs_sendprobe: sendmsg: Cannot assign requested address
    set 16 08:43:14 arch ntpd_intres[338]: host name not found: 0.pool.ntp.org
    set 16 08:43:14 arch ntpd_intres[338]: host name not found: 1.pool.ntp.org
    set 16 08:43:14 arch ntpd_intres[338]: host name not found: 2.pool.ntp.org
    set 16 08:43:14 arch ntpd_intres[338]: host name not found: 3.pool.ntp.org
    set 16 08:43:18 arch ntpd_intres[338]: host name not found: 0.pool.ntp.org
    set 16 08:43:18 arch ntpd_intres[338]: host name not found: 1.pool.ntp.org
    set 16 08:43:18 arch ntpd_intres[338]: host name not found: 2.pool.ntp.org
    set 16 08:43:18 arch ntpd_intres[338]: host name not found: 3.pool.ntp.org
    set 16 08:45:03 arch login[308]: pam_systemd(login:session): Failed to connect to system bus: Did not receive a reply. Possible causes include: the remote application did not send a reply, the message bus security policy blocked the reply, the reply timeout expired, or the network connection was broken.
    set 16 08:45:04 arch kdm[351]: :0[351]: pam_systemd(kde:session): Failed to connect to system bus: Failed to connect to socket /run/dbus/system_bus_socket: Connection refused
    set 16 08:45:04 arch kdm[351]: :0[351]: pam_close_session() failed: Cannot make/remove an entry for the specified session
    set 16 08:45:04 arch systemd-coredump[1103]: Process 309 (X) dumped core.
    [1;39m-- Reboot --[0m
    set 16 08:46:11 arch dhcpcd[346]: eno1: ipv6rs_sendprobe: sendmsg: Cannot assign requested address
    set 16 08:46:12 arch ntpd_intres[337]: host name not found: 0.pool.ntp.org
    set 16 08:46:12 arch ntpd_intres[337]: host name not found: 1.pool.ntp.org
    set 16 08:46:12 arch ntpd_intres[337]: host name not found: 2.pool.ntp.org
    set 16 08:46:12 arch ntpd_intres[337]: host name not found: 3.pool.ntp.org
    set 16 08:46:16 arch ntpd_intres[337]: host name not found: 0.pool.ntp.org
    set 16 08:46:16 arch ntpd_intres[337]: host name not found: 1.pool.ntp.org
    set 16 08:46:16 arch ntpd_intres[337]: host name not found: 2.pool.ntp.org
    set 16 08:46:16 arch ntpd_intres[337]: host name not found: 3.pool.ntp.org
    set 16 08:48:02 arch login[305]: pam_tally(login:auth): pam_get_uid; no such user
    kdm.log
    > http://pastebin.com/zmgj4AGq
    Xorg.0.log has no errors.
    How can I resolve it?
    Thanks
    Last edited by Fregtux (2013-09-20 08:35:13)

    Fregtux wrote:
    Thanks Thaodan! I deleted /var/tmp/kdecache-$USER and I solve the problem! I also restore .kde4_backup and at the moment have no issue.
    Small question: I noticed that there are also kdecache-kdm and kdecache-root. I should remove it or doesn't matter?
    Thanks for the help!
    THANKS, my White Screen was caused by a combination of issues but this solution worked for me.
    My Problem -
    I am not sure exactly what caused my white screen, I was playing around with /etc/profile & /etc/sudoers
    What I changed -
    sudoers - I added my user group to sudoers and allowed sudo to execute applications using xauth in home dir
    profile - changed umask to 133 ( I hate execute bit ) and default text editor to nano
    What Happened -
    Tried to reload via source but no changes where taking effect so I rebooted. 
    Upon reboot I could not login to KDE, it would keep looping back to the KDM after I entered by password for my user, however it would let me login as root ( after I enabled root login ).
    I figured this was a permission issue so I changed umask back to 022 in /etc/profile, I was then greeted with the White Screen after login.  I read numerous posts about how to fix this, most said to reinstall kde and delete /tmp, none of this worked.
    I deleted /var/tmp/kdecache-$USER and now I am back in business ( I had to re set the widgets, i.e. panel ).
    I was so excited that I had to write a post about it!
    Thanks again!

Maybe you are looking for