White screen flash when I use Preview to look at pics!

GDay all
About a week ago my G5 Duel started flashing a white screen (like a camera flash) when I load any jpg tiff or pdf using Preview. I minimise the photo file, then load it back to full size and I get a white flash.
Its like someone is taking a screen dump of my screen every time I use the preview program... If I was on a PC I would think I was being hacked...
Any ideas?
Regards
Tee
Australia

Create a new account, name it "test" and see how your apps work in that User acct? (That will tell if your problem is systemwide or limited to your User acct.) This account is just for test, do nothing further with it.
Open System Preferences >> Accounts >> "+" make it an admin account.
If the problem is present in the test account also, then it is systemwide. In this case try repairing this with the 10.5.2 Combo Update This is a fuller install, as opposed to an incremental "delta" update so it should overwrite any files that are damaged or missing. It does not matter if you have applied it before.
Remember to Verify Disk before update and repair permissions after update from /Applications/Utilities/Disk Utility.
If the problem does not appear in the test account try starting in "Safe Mode" (It will take a bit more time to startup because it runs a directory check first).
If that works go to System Preferences >> Accounts >> Login Items and remove them. Boot normally and test. If there are still problems, go to ~(yourHome)/Library/Contextual Menu Items and move whatever is there to the desktop. Then do the same with /Library/Contextual Menu Items. Lastly, try moving /Users/Home)/Library/Fonts to your desktop and restarting.
Log out/in or restart, if that sorts it start putting items back one at a time until you find the culprit.
Let us know.
-mj

Similar Messages

White Screen Flash while in use

So I tried doing some resarch about a white screen, but I all I keep finding is a white screen issue when you boot the macbook and that is not my problem. For the past week I have noticed that when I am using my computer the screen will flash to white for about 3 second then go back to the screen/page I was working on. At first I brushed it off, but it has happened about four times in the past week. The main programs I have been using are Safari and Microsoft Word for mac. I have also noticed that my computer has been running slower than usual. I have researched that and tried many fixes like getting files off my desktop/empting my cache among other things. I have not updated to Lion, but all of my software is up to date.
My macbook is 3 years old and just wanted to see if anybody has any idea what white flashes mean.

Create a new account, name it "test" and see how your apps work in that User acct? (That will tell if your problem is systemwide or limited to your User acct.) This account is just for test, do nothing further with it.
Open System Preferences >> Accounts >> "+" make it an admin account.
If the problem is present in the test account also, then it is systemwide. In this case try repairing this with the 10.5.2 Combo Update This is a fuller install, as opposed to an incremental "delta" update so it should overwrite any files that are damaged or missing. It does not matter if you have applied it before.
Remember to Verify Disk before update and repair permissions after update from /Applications/Utilities/Disk Utility.
If the problem does not appear in the test account try starting in "Safe Mode" (It will take a bit more time to startup because it runs a directory check first).
If that works go to System Preferences >> Accounts >> Login Items and remove them. Boot normally and test. If there are still problems, go to ~(yourHome)/Library/Contextual Menu Items and move whatever is there to the desktop. Then do the same with /Library/Contextual Menu Items. Lastly, try moving /Users/Home)/Library/Fonts to your desktop and restarting.
Log out/in or restart, if that sorts it start putting items back one at a time until you find the culprit.
Let us know.
-mj

White screen flash when shutting down after a suspend

If I have suspended my laptop at any time during its uptime, when shutting down the screen flashes white, but it turns off as usual. This only happens if I have suspened.
There are no issues as far as I can tell, I see nothing much in journalctl when comparing a suspeded shutdown vs no suspend.
Im using nouveau, and I'm up-to-date as of now.
Google hasnt returned much,
Anyone else seeing this?

Create a new account, name it "test" and see how your apps work in that User acct? (That will tell if your problem is systemwide or limited to your User acct.) This account is just for test, do nothing further with it.
Open System Preferences >> Accounts >> "+" make it an admin account.
If the problem is present in the test account also, then it is systemwide. In this case try repairing this with the 10.5.2 Combo Update This is a fuller install, as opposed to an incremental "delta" update so it should overwrite any files that are damaged or missing. It does not matter if you have applied it before.
Remember to Verify Disk before update and repair permissions after update from /Applications/Utilities/Disk Utility.
If the problem does not appear in the test account try starting in "Safe Mode" (It will take a bit more time to startup because it runs a directory check first).
If that works go to System Preferences >> Accounts >> Login Items and remove them. Boot normally and test. If there are still problems, go to ~(yourHome)/Library/Contextual Menu Items and move whatever is there to the desktop. Then do the same with /Library/Contextual Menu Items. Lastly, try moving /Users/Home)/Library/Fonts to your desktop and restarting.
Log out/in or restart, if that sorts it start putting items back one at a time until you find the culprit.
Let us know.
-mj

My MacBook was acting weird so I restarted it and when I login a white screen flashes and goes back to the login page. Help?

My MacBook was acting weird like sometimes I would log on and I wouldn't be able to type my password for a couple seconds,but it usually logged in after that. Then I left my computer open after installing the recent update after that all my applications were not responding. So I shut it down, when I turned it back on about an hour later it went to this loading screen and then to the login like usual. After I tried logging in a white screen flashed and it went back to the login/ password screen like nothing happened. Any ideas on what happened and what I can do to fix it?

Reinstall OS X;
Reinstalling Lion/Mountain Lion Without Erasing the Drive
Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the main menu. Repair the Hard Drive and Permissions as follows.
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu.
Reinstall Lion/Mountain Lion: Select Reinstall Lion/Mountain Lion and click on the Continue button.
Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.

Screen flashes when using selection tool in Photoshop CC

Does anyone know why my Windows PC screen flashes when I try to use the selection tools in Photoshop CC?

Hi - thanks for your comments. It was happening on all of the selection tools however I have solved the problem by changing the 'Advanced Graphics Processor Setting' to 'Basic' in Photoshop CC.
Thanks anyway

Usb mouse auto disconnect time and time,Screen flash and flash when I use discrete graphic card

as title
My usb mouse auto disconnect and reconnect time and time,
no one knows when the mouse will disconnect,but every time when that mouse disconnect ,it will be reconnected in 2-5sec.
Screen flash and flash when I use discrete graphic card with the battery or use AC when connect the external display with VGA CABLE.
Mouse: Logitec G400/G1
Display:Lenovo D2081WIDE
machine:T430 2349 CTO

system info:
machine TYPE: THINKPAD T430 /2349CTO
operating system :Lenovo OEM ultimate X64 SP1
mouse type:Logitech G400 and Logitech G1
time:from 2012-10 to now
threat NO.1
USB mouse auto disconnect and reconnect time and time,no one knows when the mouse will disconnect,but every time when that mouse disconnect ,it will be reconnected in 2-5sec.
every time when the mouse disconnect I heard the sound which like USB DEVICE unplug,and when it reconnected I heard the sound which like USB DEVICE plug in.
threat NO.2
Screen flash and flash when I use discrete graphic card with the battery or use AC when connect the external display with VGA CABLE.
threat NO.3
the battery auto losing capacity!!!!!!
1% everyday about 0.2Wh
since I bought to now,
the Design capacity has losing from 57.XX Wh to 47.52Wh
and full charge capacity is 48.68.
the battery info:
cycle count is 18
Bar-Code number 1ZKFD27S1RF
SerialNumber 1896
First used date 2012-09
FRU 45N1001
Firmware 0003-0080-0100-0165

Angry Birds Friends on Facebook will not load in Firefox, just white screen. Will load using Chrome, etc?

Angry Birds Friends on Facebook will not load in Firefox, just white screen. Will load using Chrome, etc? Checked for malware, cleared cache, re-installed Firefox, disabled add ons, enabled java, updated flash and shockwave, etc.

Hello,
Try disabling graphics hardware acceleration. Since this feature was added to Firefox, it has gradually improved, but there still are a few glitches.
You might need to restart Firefox in order for this to take effect, so save all work first (e.g., mail you are composing, online documents you're editing, etc.).
Then perform these steps:
*Click the orange Firefox button at the top left, then select the "Options" button, or, if there is no Firefox button at the top, go to Tools > Options.
*In the Firefox options window click the ''Advanced'' tab, then select "General".
*In the settings list, you should find the ''Use hardware acceleration when available'' checkbox. Uncheck this checkbox.
*Now, restart Firefox and see if the problems persist.
Additionally, please check for updates for your graphics driver by following the steps mentioned in the following Knowledge base articles:
[[Troubleshoot extensions, themes and hardware acceleration issues to solve common Firefox problems]]
[[Upgrade your graphics drivers to use hardware acceleration and WebGL]]
Did this fix your problems? Please report back to us!
Thank you.

My other booklet's 3G LED is flashing when i use i...

my other booklet's 3G LED is flashing when i use it, it is my second booklet...
and it cannot concent with 3G now...I have try to recover the system and reinstall the Globetotter MO40X...still flashing...how can i do?

There is not settings to change. You can only select on the preview screen where on the photos exposure (as well as focus) should be based.
What type of natural/ambient lighting is on the subject? that can affect the color balance.
Does it take OK phtos in noral light where flash is required?
You can try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: Back up and restore your iOS device with iCloud or iTunes
- Restore to factory settings/new iOS device.
If still problem, make an appointment at the Genius Bar of an Apple store and discuss it with them
Apple Retail Store - Genius Bar

Logic 9 keeps crashing with white screen flash!!!

Hi all,
Lately Logic has been crashing consistantly every 15-30 min since updated to 10.7.4. It has become absolutly unbearable now and is constantly ruining work and flow. Everytime it crashes a white screen flashes up and if im lucky i can save just in time before it completely freezes and the rainbow ball of death starts spinning. I have to then force quit logic. The crashes happen randomly in time and in task. The one reocurring act that i've found it tends to crash alot on is when trying to move some in the arrangement or the piano roll. I have no idea what the problem is and would post a crash report but since im force quiting EVERY time i am unable to obtain one.
Is anyone else experiencing the same problems and if so is there a fix.
MRADERZ

Repair Disk Permissions did not work but so far so good on reinstalling the update.
Seems to be working fine on my macbook pro.
No crashes since reinstall so will do this on my imac when i get home from work.
Fingers crossed works the same as it is my main producing computer.
Thank You AnaMusic unbelievably appreciated.
mraderz

My iphone5 screen flashes when trying to make a call. I can't access any of screen features.

My screen flashes when trying to make an outgoing call. I am unable to access any of the screen features such as keyboard etc.

Could be a problem with the proximity sensor. Are you using a case around your phone or a protective film attached to the screen? If yes, remove them, to make sure that the sensor is not covered.
Also try to reset the phone by holding the sleep and home button for about 10sec, until the Apple logo comes back again. You will not lose data by resetting.

I have manipulated a photo using layers etc and then flattened it and saved it under a new name. When I use 'Preview' (mac) to view the finished photo it doesn't look right. It's as the layers have not flattened correctly. When viewed in Elements 12 it

I have manipulated a photo using layers etc and then flattened it and saved it under a new name. When I use 'Preview' (mac) to view the finished photo it doesn't look right. It's as the layers have not flattened correctly. When viewed in Elements 12 it looks OK. The photo looks incorrect in other software such as photo books.
Looking at the same photo before flattening, what is being shown is only the top layer.
How do I correct this?

STEVEN1A wrote:
I have manipulated a photo using layers etc and then flattened it and saved it under a new name. When I use 'Preview' (mac) to view the finished photo it doesn't look right. It's as the layers have not flattened correctly. When viewed in Elements 12 it looks OK. The photo looks incorrect in other software such as photo books.
Looking at the same photo before flattening, what is being shown is only the top layer.
How do I correct this?
The top layer is indeed the one that is visible, unless there is/are area(s) of translucency on that layer, so that you can visualize a portion of the subjacent layer.
the finished photo it doesn't look right. It's as the layers have not flattened correctly.
Are your settings targeted to have the printer manage colors, or, to have PSE manage colors?

When I use Preview,Photo Mechanic and Pages, all JPEG or RAW images appear corrupted. I thought my hard drive was failing and replaced it and migrated everything over but the problem still exists. Any idea what is going on?

When I use Preview,Photo Mechanic and Pages, all JPEG or RAW images appear corrupted.
I thought my hard drive was failing and replaced it and migrated everything over but the problem still exists.
It felt as if maybe a virus was at work but I ran Sophos and found nothing.
I store images on my Drobo Raid system but when I work from my Macbook Pro I have no issues, just on the tower.
Any idea what is going on?

First of all, why did you say yes to Nero Back up before researching what it does with files already on the HDD? When I install Nero, the Back Up is the first thing I disable, it is a nagging pain, there are much better backup programs available. There are several file recovery programs out there to recover deleted files, that is, if that is what happened. Also, if you haven't overwritten the files, so you should be able to find them.

When I use Preview my computer locks up. Can't use it to view PDFs. Any ideas?

When I use Preview my computer locks up. Can't use it to view PDFs. Any ideas?
I try to save files as a PDF on external hard drives. When I select SAVE AS PDF I get spinning colorwheel and the program I am using locks (Quicken, Quickbooks, Gmail etc.)

There were several /Library/preferences. The only one that had the file was the one under my user name. I deleted it. I was using Quickbooks when the problem started. It is locked. I have to reboot the computer to use it again. I tried SAFARI using the PRINT button then SAVE AS PDF. It didn't work. It locks Safari up. I will reboot and hopefully continue.
P.S. I've done this procedure before and I was able to Save, but then the problem came back.

Hello,I have done this successful in the past but on my IPad it shows I have 4 apps that need to be updated so when I hit the update tab all I get is a white screen. When I hit the purchase or other tabs it opens up. What could be the problem?

****,I have done this successful in the past but on my IPad it shows I have 4 apps that need to be updated so when I hit the update tab all I get is a white screen. When I hit the purchase or other tabs it opens up. What could be the problem?

There have been numerous reports on the forum today regarding this issue. It seems to be an issue at Apple, but no information has been posted on the status site.
http://www.apple.com/support/systemstatus/

When I use Preview to view a PDF in Hebrew, I cannot search in Hebrew nor copy or paste instead I get gibberish

When I use Preview to view a PDF in Hebrew, I cannot search in Hebrew nor copy or paste instead I get gibberish.
Is there a way to fix this?

Do you have an example that someone could look at? I wouldn't be surprised if most PDFs you found were gibberish. PDF is a print format and is really only designed to be printed out and read by a human. Constructing a PDF with real Hebrew Unicode would be a rare find. Here is one example I found by passing the Hebrew word for "Hebrew" in Hebrew in Google. This is a valid PDF. I have no idea what it says.
http://www1.amalnet.k12.il/berseva/profession/art/DocLib/אותיות%20הבריאה.pdf

White screen flash when I use Preview to look at pics!

Similar Messages

Maybe you are looking for