White screen flash when shutting down after a suspend

If I have suspended my laptop at any time during its uptime, when shutting down the screen flashes white, but it turns off as usual. This only happens if I have suspened.
There are no issues as far as I can tell, I see nothing much in journalctl when comparing a suspeded shutdown vs no suspend.
Im using nouveau, and I'm up-to-date as of now.
Google hasnt returned much,
Anyone else seeing this?

Create a new account, name it "test" and see how your apps work in that User acct? (That will tell if your problem is systemwide or limited to your User acct.) This account is just for test, do nothing further with it.
Open System Preferences >> Accounts >> "+" make it an admin account.
If the problem is present in the test account also, then it is systemwide. In this case try repairing this with the 10.5.2 Combo Update This is a fuller install, as opposed to an incremental "delta" update so it should overwrite any files that are damaged or missing. It does not matter if you have applied it before.
Remember to Verify Disk before update and repair permissions after update from /Applications/Utilities/Disk Utility.
If the problem does not appear in the test account try starting in "Safe Mode" (It will take a bit more time to startup because it runs a directory check first).
If that works go to System Preferences >> Accounts >> Login Items and remove them. Boot normally and test. If there are still problems, go to ~(yourHome)/Library/Contextual Menu Items and move whatever is there to the desktop. Then do the same with /Library/Contextual Menu Items. Lastly, try moving /Users/Home)/Library/Fonts to your desktop and restarting.
Log out/in or restart, if that sorts it start putting items back one at a time until you find the culprit.
Let us know.
-mj

Similar Messages

  • White screen flash when I use Preview to look at pics!

    GDay all
    About a week ago my G5 Duel started flashing a white screen (like a camera flash) when I load any jpg tiff or pdf using Preview. I minimise the photo file, then load it back to full size and I get a white flash.
    Its like someone is taking a screen dump of my screen every time I use the preview program... If I was on a PC I would think I was being hacked...
    Any ideas?
    Regards
    Tee
    Australia

    Create a new account, name it "test" and see how your apps work in that User acct? (That will tell if your problem is systemwide or limited to your User acct.) This account is just for test, do nothing further with it.
    Open System Preferences >> Accounts >> "+" make it an admin account.
    If the problem is present in the test account also, then it is systemwide. In this case try repairing this with the 10.5.2 Combo Update This is a fuller install, as opposed to an incremental "delta" update so it should overwrite any files that are damaged or missing. It does not matter if you have applied it before.
    Remember to Verify Disk before update and repair permissions after update from /Applications/Utilities/Disk Utility.
    If the problem does not appear in the test account try starting in "Safe Mode" (It will take a bit more time to startup because it runs a directory check first).
    If that works go to System Preferences >> Accounts >> Login Items and remove them. Boot normally and test. If there are still problems, go to ~(yourHome)/Library/Contextual Menu Items and move whatever is there to the desktop. Then do the same with /Library/Contextual Menu Items. Lastly, try moving /Users/Home)/Library/Fonts to your desktop and restarting.
    Log out/in or restart, if that sorts it start putting items back one at a time until you find the culprit.
    Let us know.
    -mj

  • Mac air screen flickers and shuts down after startup

    I recently loaded Lion on my 2011 mac air. After a week the computer started to have slow startup's, now when i turn on the computer the screen flickers and immediatly shuts down. How can i fix this problem.

    correction the Mac Air is a 2010

  • Screen Flashes when opening lid after locked - T410s w/discrete -- Video of problem inside

    My computer is set to password lock (in Windows 7) when I close the lid, but remain powered on.  When I open the lid of the computer, the screen flashes around 10 times before it gives me the login screen. 
    My bios is updated, my graphics are turned to 'high performance' ... always on - when plugged in with A/C adapter.
    Anyone know what the problem might be?
    http://tinypic.com/player.php?v=fky0qd&s=7
    System specs:
     i5-520M(2.4GHz), 8GB RAM (2x 10666 - 1333mhz sticks, downclocked), 250GB 5400rpm HD, 14.1in 1440x900 LCD, 512MB nVIDIA Quadro NVS 3100m, CDRW/DVDRW, Intel 802.11agn wireless, WWAN option, Bluetooth, 1Gb Ethernet, UltraNav, Secure Chip, FPR, Camera, 6c Li-Ion, Win7 Pro 64

    @paradiddle,
    If it is possible, could you try removing the password so when the system wakes up from sleep, see if the screen flashes.
    Also when your display is "out" to the TV via HDMI, try pressing Fn + F7 and see if you are able to switch it back to laptop view without rebooting. You could also change this via Display Properties.
    //JameZ
    Check out the Community Knowledge Base for hints and tips.
    Did someone help you today? Press the star on the left to thank them with a Kudo!
    If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"!
    X240 | 8GB RAM | 512GB Samsung SSD

  • Screen freezes when shutting down with sound running

    I have Windows 2000 with GF4 and Audigy2 ZS.  I installed the latest WinDVR and tuner drivers and watever from the web.  The card works fine, like I can watch TV and stuff, but when I try to close the program, the screen freezes and the sound keeps on running at the background.  I have installed the latest directx drivers, video drivers, sound drivers and windows update... Please help

    If your PC has an Intel Pentium 4 with Hyperthreading turned on please read my post re. problems with this configuration.

  • Starting up and shuts down after 30 seconds

    My powerbook started doing this. It's starting up, you hear the chime , then the spinning thing with the gray screen, then it shuts down after about 30 seconds.
    I did try a few things that I've read in different threads. I can do the single user mode and the black screen comes I can type the things from this thread but it doesn't look it works.. https://discussions.apple.com/thread/1801027?threadID=1801027 . I did type those commands w/wo the "+" signs.
    Please help

    The plus signs were remnant discussion formatting keys and are not part of the commands.
    OK, here goes on what to do.  Boot into single user mode.  Then try the following  command
    /sbin/mount   -uw   / <enter>
    which mounts the boot volume as write-enabled (it normally comes up read-only to begin with) then this command:
    /sbin/fsck   -fy   / <enter>
    And let it attempt the repair of the boot volume.  It will either report that the volume is OK or that it has been repaired.  If it has been repaired, then repeat the second command until it just says things are OK.  Please post the results.
    Note that usually, in single-user mode, those commands will appear as an advisory just before the first terminal prompt.

  • I phone 3 just shuts down after 3 to 4 mins when making a call large apple logo apears on screen the only way to reboot is to charge charge it although there is enough battery.any answers thanks

    i phone 3 shuts down after 3 to 4 mins when making a call - then large apple sign apeers  phone frozen - only way to unlock is to re charge although there is enough battery - any answers would be welcome.

    The Basic Troubleshooting Steps are:
    Restart... Reset... Restore from Backup...  Restore as New...
    Restart / Reset
    http://support.apple.com/kb/ht1430
    Backing up, Updating and Restoring
    http://support.apple.com/kb/HT1414
    But... This can happen if the phone has been Hacked / Jailbroken / Modified...
    If this is the case... Then... None of the above will necessarily work...
    And...
    The discussion of Jailbroken Devices is against the Terms of Use of this Forum.
    You will need to look elsewhere.

  • My MacBook was acting weird so I restarted it and when I login a white screen flashes and goes back to the login page. Help?

    My MacBook was acting weird like sometimes I would log on and I wouldn't be able to type my password for a couple seconds,but it usually logged in after that. Then I left my computer open after installing the recent update after that all my applications were not responding. So I shut it down, when I turned it back on about an hour later it went to this loading screen and then to the login like usual. After I tried logging in a white screen flashed and it went back to the login/ password screen like nothing happened. Any ideas on what happened and what I can do to fix it?

    Reinstall OS X;
    Reinstalling Lion/Mountain Lion Without Erasing the Drive
    Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
    Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the main menu. Repair the Hard Drive and Permissions as follows.
    When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list.  In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu.
    Reinstall Lion/Mountain Lion: Select Reinstall Lion/Mountain Lion and click on the Continue button.
    Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.

  • HP G62-367DX shuts down after initial boot screen and pres ESC to enter BIOS

    I have a HP laptop with major problem. HP G62-367DX shuts down after I press power button, for a second I see HP logo and in left part of the screen press ESC to enter BIOS.
    I tried Win+B metod, does enyone have simmilar problem or idea how to solve this problem. Do you think problem is in BIOS or in some part of harware. If in BIOS is there any other method than pressing Win+B and then pressing power button for 3 sec?
    I found some solutions via USB disk but I do not have raw and original BIOS files.
    Please, please help me I am helpless and left without any solution (
    Thank you so much in advance!

    Hello Bananaman,
    On the boot when you see the HP logo and the prompt that says press ESC to enter the BIOS, does the screen just go black or stay on that screen?
    Please respond back at your earliest convenience.
    Thanks
    Clicking the White Kudos star on the left is a way to say Thanks!
    Clicking the 'Accept as Solution' button is a way to let others know which steps helped solve the problem!

  • 890GXM-G65 on-board Audio white noise when shutting down ... Please Help

    Just got this board on ebay. Runs great but when rebooting the following happens:
    MSI 890GXM-G65 on-board Audio produces a second's worth of white noise (radio no-station-tuned static sound) when shutting down - about a second before the screen goes bank and the PC restarts
    I don't mind the noise but is this normal or should I send the board back ?

    I'm using the following hardware :
    Athlon II x 3 440 AM3 (unlocked 4 cores @ 3.6GHz)
    Thermaltake MaxOrb
    MSI 890GXM-G65
    2 x 2GB Kingston 1066 CAS 7 DDR3 KVR1066D3N7K2/4G
    MSI N460GTX Cyclone 1GD5/OC
    OCZ Fatal1ty 550W Modular (Dual Rails +12V@25A per rail)
    WD 250GB 7200rpm SATA II
    Thermaltake Gaming Cube VF6000BNS
    Windows 7 x64 Home Premium
    19" Sony Triniton CRT Monitor
    All Windows Sounds are turned off except for Device Connect / Disconnect / Connect Failure. I have an Audigy 2 PCI card but I haven't tried it because the drivers always lock up the PC when I run MSI Afterbutner, eVGA Precision or almost any other hardware monitoring utility.
    Since I flashed the BIOS to v1.B I feel I can't return it to the seller but I really like the board and it works well, except for this integrated audio issue. I won't return this board - it's a keeper.
    Still, I'm hoping for a fix if possible.

  • AFTER UPDATE GREY SCREEN NO SOUND THEN SHUTS DOWN AFTER 30  SECONDS PLEASE HELP

    AFTER UPDATE GREY SCREEN APPEARS WHEN POWER BUTTON PRESSED NO START UP SOUND THEN SHUTS DOWN AFTER 30  SECONDS AND REPEATS ITS SELF PLEASE HELP

    As for now, only thing that helped was an archive and install with preserve user settings. Seems after the reinstall of 10.4. everything that was weird has become normal again. I hope very much this state stays on for a while - or ever!
    A comment to everybody: with problems that are common you get a lot of help from friendly users in here, but if like in my situation things get a bit more uncommon than the usual querks and troubles your bound to go through a whole workflow of tests and algorithms - i did learn some new things but eventually I had to go for the ultimate - the reinstall (of course, erase and install would have been more work.) and it's frustrating not to find out how it came to this problem. I wish I could nail it down to something I did mistakenly - i guess I'll find out next time.
    THANKS THOUGH to those who replied.
    Keywan

  • Macbook shuts down after grey screen

    My MacBook shuts down after the gray screen every time I try to start it it does not work

    While we all have MacBooks in this forum most of us don’t run Mountain Lion. There's a Mountain Lion Support Community where everybody has Mountain Lion. You should also post this question there to increase your chances of getting an answer. https://discussions.apple.com/community/mac_os/os_x_mountain_lion
    You should also ask this in the MacBook Pro forum. This is the forum for the white and black plastic MacBooks that were discontinued in 2010.
    https://discussions.apple.com/community/notebooks/macbook_pro

  • Having problems with Bridge shutting down after saving photo in PS Cs5,,,,,,,,,  Also when i attempt to update either PS or bridge get an error message in Adobe application manger "Error loading updater workflow"

    Having problems with Bridge shutting down after saving photo in PS Cs5,,,,,,,,,  Also when i attempt to update either PS or bridge get an error message in Adobe application manger "Error loading updater workflow"

    Sorry for the late reply. My email firewall has become a little over zealous & sent a lot of my emails straight to my junk email folder, so I have only just now discovered your reply in my junk mail folder.
    The only "don't open files exceeding xxx megabytes" instruction I can find in my Prefs, is in the Bridge Prefs for Thumbnails, & mine is set at 1000mb. The biggest files I handle are bigger than 200mb so I should be able to open a few, not just one.
    However, this doesn't explain why I can open a psd format file of 180mb, close it, but then can't open a RAW format file of only 26mb immediately after.
    I can open the RAW file only if I restart my computer - very annoying!
    However, thanks for the advice about the video card & memory.
    So, I'm still stuck as to what the issue is.

  • Pse trial v12 installed but when opening the editor it shuts down after 2 seconds, what can be the problem? I have windows 8.1 64 bit with the latest video drivers installed. Thanks

    PSE trial 12 installed just fine but when i start the editor it opens and shuts down after about 2 seconds without an error, the only thing that appears is a message with 'continue trial'.
    I have windows 8.1 64 bit and i already installed the latest video drivers, intel hd 4000 and nvidia geforce 710M.
    I also installed premiere elements version 12 with the same problem.
    What can be the problem here, please help?
    Thanks.
    Wim.

    Hi roberto-
    Yes, its a shame. I have also contacted lenovo support hoping that they can sort out this problem. However, first response from them was 'contact your internet service provider since internet connectivity goes down'! :-/ I am hoping I have been able to get through to them now at least about where the problem lies. I wonder if anyone has tried using the laptop with the same broadcom wireless adapter with some other version of OS (linux, windows 7 etc.) and whether they still face the same problem. I haven't tried that yet. If this is just an OS / driver issue I hope someone somewhere is working on a fix! If not, I guess the only other solution would be to get an external USB wifi adapter but that is not something one would want to do when you buy a brand new Lenovo laptop. This was a big let down for me.
    -sag

  • After having shut down after installing updates, when I restarted and tried to open a word file, it started opening ALL the word docs and the only way I could stop it was by"force quit"  arted  and tried to open

    After having shut down after installing updates, when I restarted and tried to open a word doc, it started opening ALL the word docs and the only way I could stop it was by"force quit"  . This is REALLY annoying!!

    May be it is the Resume feature.
    System Preference > General > Number of recent items
    Uncheck the box next to      "Restore windows when quitting and re-opening apps".
    Best.

Maybe you are looking for