White screen in Avid Meridian after export from FCP 6?

After exporting a sequence as 10 bit uncompressed NTSC (using AJA Kona II card) on FCP Ver. 6.06, I imported the file into my Avid Symphony (Meridian).
When I tried to play the file, I could only see a white screen. Audio plays fine.
I have searched Apple, AJA (Kona card) and Avid websites, but can't seem to find a codec or update that addresses this problem.
Any suggestions?

Ahhh...I think the big issue is that you are running that Avid on a PC. So what you need to do is convert the file to the Avid Meridian QT codec, and then bring it over. This means that you need to download that Avid codecs and install those on your Mac.
And there will be a gamma shift...no way around that. You'll have to correct for that on the Avid.

Similar Messages

Quicktime video skips and freezes after exporting from FCP

I have tried exporting from Final Cut a few different ways, but my QT file had short skips and freezes in the video (the audio is perfect).
I have done this same thing several time with no problems at all. What am I doing wrong?

DETAILS
What are you exporting?
How are you exporting... QT Movie, Conversion, what settings?
What drive are you exporting to?
What version of FCP and QT?

Audio level drop after exporting from FCP to Comp

my dialnorm at -31db, precompressor compression setting @ none, any other setting i need to look at??

do I need both of the audio files that ALL generates, or just the APack lookalike file?
This is the topic of some debate.
One camp - which I belong to - believes that you only need the A.pack lookalike (the .ac3 file). This allows you to either fit more video into your project or encode the video at a higher bit rate. Also, there is strong belief by that the inclusion of high data rate AIFF files causes many players to choke. This is the reason that gets the blame for many iDVD discs choking on players, since iDVD uses only AIFF audio for it's projects.
The exception to the rule (for this camp) is if you're doing a music-based project - a concert, music video or karaoke DVD - where you don't want any compression of the audio.
But, to try and answer your question directly, if you've successfully used A.Pack files in the past, you should be fine with just the .ac3 file from Compressor 2. At least, that's how I feel about it.

Ipad screen is white. Restored it on iTunes. Press home and on switch goes black then back to white with no logo at all. Can't get past the white screen. This happened after running app updates. 16GB OS 7.1.1

The ipad screen is white. Holding buttons didn't work so I restored it on iTunes. When I press home and on switch, the screen is white, goes black then back to white with no logo at all. Can't get past the white screen. This happened after running app updates. Is there any fix besides going to Apple store? In iTunes on computer can see what is on there. 16GB OS 7.1.1

FORCE IPAD INTO RECOVERY MODE
1. Turn off iPad
2. Turn on computer and launch iTunes (make sure you have the latest version of iTune)
3. Plug USB cable into computer's USB port
4. Hold Home button down and plug the other end of cable into docking port.
DO NOT RELEASE BUTTON until you see picture of iTunes and plug
5. Release Home button.
ON COMPUTER
6. iTunes has detected iPad in recovery mode. You must restore this iPad before it can be used with iTunes.
7. Select "Restore iPad"...
Note:
1. Data will be lost if you do not have backup
2. You must follow step 1 to step 4 VERY CLOSELY.
3. Repeat the process if necessary.

Cannot Open Excel File after exporting from Disco Plus

Hi there,
I got a question from one user having issue with opening Excel file after exporting from Disco Plus.
The report has been using for a while and he is using Excel 2003 version and Discoverer 10g(10.1.2.2), he never got this kind of error before, just recently got error.
After exporting from Disco Plus he saved file on his desktop and when he tries to open the excel it says "Cannot be Accessed, can be corrupted...." but this is not from network drive since he saved file on local desktop or C drive.
Also not for all reports, only this particular report and only specific parameter, for example for parameter 2008 Feb opened successfully, but for2009 Feb he gets this error when trying to open excel.
i tried in excel 2007 also , i dont think this is Excel version error, am not sure.
Also after go live last week (we upgraded database from 9i to 10g) but i am not sure this causes ,since for one parameter working, for other parameter not working.
Actually we should get one window for Macro when we try to open excel, but he is not getting it seems.
Any ideas/thoughts on this would be greatly appreciated.
Thanks for your help
--skat

Rod,
Thanks for your quick response on this.
Yes, we can export to other formats as well, but actually exporting is working, after saving the file on our local desktop/drive and when we try to open we get this kind messages or we cannot open the file, we should get message window for Macro to enable/disable but for this report we are not getting this either,
Also this happens only for specific parameters,like i mentioned above it works I mean excel file opens for one set of parameters but for some other set of parameters cannot open.
For example :- when we enter FEB 2008 it works, if we enter FEB 2009 it won't open the file.
This is weird
I am still working on this issue, may be better to recreate the report again might be helpful,
Any ideas/comments/thoughts would be great
Thanks
Skat

PDFs dull in Acrobat after exporting from Indesign - again

Hi folks,
I am aware of a previous post which discussed this issue which was apparently resolved, but it appears to have reared its ugly head again. The problem - since updrading to Mavericks and the Creative Cloud, pdfs in Acrobat are very dull after export from Indesign and it is not a transparency blend or Indesign issue. I understand Adobe blamed Apple for not updating their colour management software and the reply from Adobe was:
"We have found the root cause of this issue and are in process of providing a fix. Once this is done, we will test it to make sure that it works as expected and will release an update patch for all our users."
I am running the latest version or everything but it appears to still be a problem. I have also uninstalled Acobat XI and tried earlier versions without success. I have a print job to send off tomorrow and I am very nervous about how this will print.

Sorry about that, I apparently forgot to attach the file; have done so now.
The method I'm using for creating outlines is simply to use the "Create Outlines" command under the Type menu within InDesign. Then I create my PDF files by using the Export command under the File menu and choosing the PDF/X1a option. 99% of the time I get perfect results, it's only when I try to make outline type that I encounter this problem. You'll clearly see the artifacts in question in the example attached.
I don't know whether or not the press would have printed these artifacts, as you suggest, since no printer has been willing to execute a file that shows any anomaly in the proof process. I can't say that I blame them.
Hopefully you will see what I'm talking about and can recommend a solution, though I like your idea of simply giving them a properly executed file and then telling them to get a life. It hasn't worked so far, as I unfortunately deal with a lot of Neanderthals around here, but I suppose it's worth putting forth again the next time this issue arises. It will.
By the way, no print house of my choosing is this far behind the curve, if at all. These cavemen are always printers who have long-standing relationships with my clients, and for whatever reason (generally lowest cost I'm sure), the clients think they hung the moon. We, of course, no otherwise, but it does it profit a designer to tell his client he or she is crazy for using a printer who is a decade behind the technology curve.
We cowboy up and seek solutions, eh?

Have white screen on iPhone 5 after it started and worked for over 10 hours

Have white screen on iPhone 5 after it started and worked for over 10 hours

So now that I have joined the community, I can see this question was asked before.... so I think I have my answer
It just takes a loooooong time

Problem exporting from FCP using compressor

Out of the blue - I'm getting batch failures trying to export from FCP for use in a DVD. Immediately after selecting compressor for export, I get an error reading "That file already exists", and a new tab appears in the media browser with a lengthy character string. Compressor opens fine, and I select Best Quality 4:3 encoding for video and aiff48 for audio. When the batch is submitted - it promptly fails and blames FCP for generating an error.
Did all kinds of restarts and work arounds to no avail. The promising news is that this error seems to occur only when exporting from FCP through Compressor.
My work-around is to export a QT movie of the piece, quit FCP, launch Compressor, and then import the QT for batching.
Hope this helps anyone else in similar situations
Martin
G5 PPC Mac OS X (10.4.8) FCP 512 post production

Hi:
How long is your movie?
The best workflow is FCP > Compressor > DVDSP.
You can encode your timeline directly to get MPEG2 video and Dolby 2 (AC3) audio files. Then import those in DVDSP and author your DVD.
Using Compressor you control the full encoding process. You can test with small parts of your movie (those where you got problems with iDVD) and find the best encoding options fopr your footage.
Of course the DVDSP learning curve is longer than iDVD but once you learned ir you probably never go back. Like iMovie and FCP.
To give you detailed info about what encoding settings to use you must post some info about your FCP project.
Hope that helps !
Alberto

Everytime I export from FCP using comressor I am lose my audio, any ideas as to why this is happening. Or do I have somthing turned off and I am just missing it? Dual 2.7 Ghz PowerPC G5 1.5 GB DDR SDRAM, Mac OS X (10.4.6)

Everytime I export from FCP using comressor I am lose my audio, any ideas as to why this is happening. Or do I have somthing turned off and I am just missing it? Dual 2.7 Ghz PowerPC G5 1.5 GB DDR SDRAM, Mac OS X (10.4.6)

Exporting via Compressor may be recommended but it is slow and doesn't fully support all available filters, etc.
Try exporting the timeline as a QT Movie (the "normal" export) using Current Settings and them submit the resultant clip to Compression. Works for me...

Export from FCP directly into DVD studio pro?

Is it possible to export from FCP directly into DVD studio pro? If not, what is the preferred file format because my exported quicktime files come up as "incompatible format" when I try to add them into my DVD project. Any help is appreciated.

You need to encode audio as well from Compressor. You'll have 2 files - audio and video.
Here's a tutorial:
http://www.youtube.com/watch?v=wFgJpd7DEWw
Message was edited by: Eric Pautsch1

Exporting from FCP to DVD

Hey
Just wondering if I can get some advise. I need to export my project from final cut pro to DVD but just wondering what the best way to do this would be to get the best quality DVD. (This is for a company to take out to potential clients to sell what the company does - so it needs to look good!)
My project is no longer than 5 mins
1920 x 1080 - 1080i (16:9)
Field Dominance: None
frame rate 25
I have Final Cut Studio latest version.
I'm trying out a few options at the moment using compressor - best quality - so we'll see what these look like, but I'm not sure what all the settings should be set at.
Any advise on what you think will be best would be great.
Thanks

Wouldn't use Quicktime conversion - no need. Just export from FCP as Quicktime Movie at current settings.
In my experience, changing the field dominance from interlaced to progressive can cause stuttering particularly in motion graphics - this might not be an issue if you're laying to tape for broadcast but when you convert back to interlaced for SD DVD it can look very ugly.
In any case, at the very least, you need to be using a Kona card or IOHD to do this type of conversion properly - and really, if you want progressive you should shoot progressive.
Message was edited by: Dynamicworm
Message was edited by: Dynamicworm

PAL files exported from FCP don't display

This is a strange one... SD PAL uncompressed files exported from FCP 6.03 won't display, you just see black. HD files are fine, as are SD PAL files exported a while ago - prior to a recent pro apps or QT update possibly? As a workaround, if they exported via compressor instead of by 'export quicktime' in FCP, they work fine. Shake is 4.0 since 4.1 doesn't want to display via a decklink.
Any ideas? This seems to be a new one.

Does the computer your using to view this video have Final Cut Pro installed?

Can't open quicktime movie that I exported from FCP 5. Help!

Can't open quicktime movie that I exported from FCP 5. Help!

What arrow?
Have you tried opening the file in FCP?
If there is no error message and it will not play in QT7, it is quite possible the file is corrupted. You will need to go back to the original project and re-export the file.
x

What format to export from FCP for iDVD?

I am having trouble coming from FCP to iDVD. Material was shot HDV on a Sony Z5 and I downconverted to DV to edit on FCP. I make a Quick Time Movie of the edit (as DV PAL) but the pans are all juddery. How should I export from FCP to stop the juddering on pans?

http://www.sjoki.uta.fi/~shmhav/SVCDon_a_Macintosh.html#edit_convertMPEG
BTW, this is the mother of all FAQs here Sadly the FAQ section of the forum decribes just the problem, not any solutions. And searching the forums doesn't always work either.
ObSig: I don't benefit from the link.

Best way to export from FCP for website

I've been reading around about this and am not getting a clear idea of what to do...
I have some short sequences in FCP (longest is 2 minutes) that I want to post individually on my new website (that I'm just learning about).
I want to export them in a way that is a small file but that looks and sounds good, and also that can be played by most or all computers.
So I guess that is two questions: settings for export from FCP, and how to control how it will be viewed.
Thanks so much, anyone with ideas or experience!

We don't know what format you are dealing with, ratio etc.
However, some short answers for you.
For best quality at a considerable small file size the choice is, yet again, H.264 (Require QT7 or higher. For universal compatibility you may need flash conversion).
FCP main menu>File>Export>QT Conversion>Options> the higher the bit rate the better the quality but the bigger becomes the file size. Size : i.e 320x240 if 4:3; 480x270 if 16x9). Choose AAC (Not PCM) as sound format (192 target bit rate).

White screen in Avid Meridian after export from FCP 6?

Similar Messages

Maybe you are looking for