White Screen issues

Hi
My cousin gave me her curve 8520 because it had dropped and the screen broke, i got a new case and lcd screen on ebay (ive rebuilt a few 8520's in the past with the same parts).
But the screen worked for a while, i found the phone a bit slow and prone to freezing, now its just went onto a permanent white screen.
Ive tried some of the methods already mentioned elsewhere but im not having much luck getting it going.
How can i tell if the circuit board is broke or if its a software issue?

You can try to reload the device software and if that doesn't work, sounds like a hardware issue of sorts.
http://us.blackberry.com/support/installpc.jsp Sorry you're having problems with this!
Please click the Thumbs Up icon if this comment has helped you!
If your issue is resolved, please click the solution button on the resolution!
Every BlackBerry should have BlackBerry Protect, get it now! | Follow me on Twitter | Bring Back BBM Music!

Similar Messages

White screen issue on Compag

My Compaq is currently displaying only a white screen. The laptop boots up fine and displays fine on an external monitor.
I have taken it apart and reseated the connectors on both the screen and the motherboard with no effect. So I am sure it's not a loose connection.
Before I go and splash out on a new replacement screen, is this an issue that is usually seen when the screen itself is at fault. Could it be the cable? or the connection on the motherboard itself. Is there a way to be certain?
I don't want to buy a new screen and find it's not at fault.
Many thanks!

Hello, @Skyfox
Welcome to the HP Forums.
I see that you have a white screen issue with the notebook. I will try to assist you.
With the steps you've taken and the fact it works correctly with an external, leaves only the display screen as the possible cause. That being said, there is no 100% way to know that it is not a cable causing the issue.
Typical steps for this issue:
Restart notebook
Hard reset notebook
Test with external monitor
Reconnect LCD cables and check all other display cables
Have notebook serviced.
You're at the point of service. This really limits the options, and a display replacement may not correct the issue.
I hope this adds any insight to the choice you need to make next.
Thank you for posting on the HP Forums.
I worked on behalf of HP.

Creative Zen X-fi (with lan) white screen issues

?Hello everyone, So I've been having my zen x-fi for a few months and it has been working excellently...until yesterday when it suddently (after what might have been a lightly hit, I had it in my front pocket and bumped in lightly into some object)...well suddently the screen went white but kind of still something black there (see photo below) <a rel="nofollow" target="_blank" href="http://img40.imageshack.us/img40/666/dscf2249redigerad.jpg"]http://img40.imageshack.us/img40/666/dscf2249redigerad.jpg[/url] I have been looking into troubleshooting about this particular issue, but what is suggested there under the white screen-issue is to reset and update firmware, something I did already first thing after it happened. The thing is that other than the screen being a quaking mess, it seems to otherwise be in working condition, because when I turn it on and push the play button music will still play as before. it's just the screen that is the problem. Any ideas? Best wishes, Babba

Hello there, thank you for your welcome. That is sad info about my music player though, I liked it so much while it was still working. unfortunately im not within the warrant period so I will have to invest in a new one. thank you for your help though. I will look into which creative player is the best one within my price range

Flash builder white screen issue

Hi All,
I have create one normal project.There is no issue but after run that project i got one issue that is White screen Issue.......i have updated flash player but cant fint that problem ....any one Tel me the reason.
Thanks
Prabu.a

After further investigation, we found out that we were defining a few of our namespace by referencing directly the packages of our custom component instead of creating a clean namespace as recommended by the flex documentation. Using the package definition works just fine when it is local but our component were located in a swc library.
We were doing this :
xmlns:foo="com.mCompany.controls.foo*"
instead of generating an xml manifest and basing our namespace on it
xmlns:foo="http://com.myCompany.controls/foo"
We think that flash builder was slowing down because each and every time we were loading up an mxml it had to rescan the said package.

Mac Mini Server Boot Camp Windows 8.1 White Screen Issue

Hello Apple Peeps!
I have a Mac Mini Server 2012 which I have had for around 6 months. I use it quite a lot mainly for Music Production on the OS X side and Graphic Design on the Windows side.
I recently decided to factory restore it as I wanted to spring clean it and reorganise the way some of my apps were installed. The way I had it set up was it was running OS X on one SSD and Windows 8.1 (installed using Boot Camp) on the other SSD. The way I went about the factory restore was I first used disk utility to erase/format the Windows SSD to Mac OS Extended (Journaled) and then went about the factory restore of OS X onto the other SSD as normal (following instructions from the Apple website).
The issue I am having now is that my newly installed Windows 8.1 (used solely on a single SSD) is hanging on a white screen for quite a long time before the Windows splash screen shows up, where before when I would boot or restart into Windows there was no white screen and it would go straight into the Windows splash screen and load to the desktop very quickly.
So my question is...
Why do I get this prolonged white screen before the Windows 8.1 splash screen appears? How can I get rid of it? It was certainly not present on my previous installation. Can anyone advise me what the computer is doing during this time so that I can do some further research into a solution.
What I have tried already....
1) PRAM & SMC reset.
2) Setting the startup disk to Boot Camp in both OS X and Windows 8.1.
3) Reinstalling Windows 8.1 through Boot Camp.
MAC MINI SERVER (LATE 2012), 2.6GHZ QUAD CORE I7, 16GB RAM, 2 x 256GB SSD, OS X 10.10.2, Windows 8.1 (Retail), Boot Camp Assistant (5.1.3), Covered By AppleCare.
I would really appreciate some help with this ;-)

I have right clicked on each SSD in Device Manager and selected the option 'Properties' from the drop down menu, which brings me to this window...
I'm not sure where I can find Device Attributes, I have clicked on each of the tabs in the window above, as far as I can see none of them mention AHCI enabled or anything similar. Thanks for all of your responses by the way...much appreciated!

White screen issue with DVC Pro HD

I have a G5, have Final Cut HD and have upgraded to QT 7 Pro. I am trying to open an HD file I shot last year, which was edited on another system. When I try to open the clip, it is a white screen with audio. The movie info is as follows.
DVCPRO HD (720p60), 1280 x 720, Millions
16-bit Integer (Big Endian), Stereo, 48.000 kHz
Any ideas on why it is not playing? Thanks!
John M

ok... i just got this on mine. yesterday i was just getting ready to log subclips from fcp5, and when i opened the project file, i noticed that all my subclips i created and orignal clip where all red / out. so i closed fcp5 and went to the location of the file. i double clicked it, and behold, white screen, audio only.. so i had to completely redo the convertion of the orginal file.
next day
I was looking for a subclip that i had already extracted from the main file, and when i double clicked it showed the video. after that closed the window, and someone asked me to reopen the quicktime file again, i double clicked it, and all of a sudden the video was white, and only audio.
ive spent about 4 to 5 hours researching with someone else on this issue and have yet to find anything such as a fix, or work around, but my video keeps disappearing which is disturbing. from what we have come down to the issue is deals within quicktime are below...
we believe that quicktime is somehow changing the codecs DVC PRO and changing it to "Integer (Big Endian), Timecode, Video.." that is what it says.. and comepletely removing the codec for the video, and deleting the video footage, but keeping the audio in place perfectly. now, we also used metadatahootenanny to inspect a copy of the file and low and behold severe corrupt of the meta data in the quicktime file. the issue be with quicktime interaction with storage, or a bug quicktime behalf. we need to find a solution to this issue. we are currently in contact with apple tech support and hopefully we will be posting a answer soon.

White screen after forced reload (used to fix previous white screen issue)

Last Friday after doing a battery pull to clear a stuck Facebook notification, upon reboot my Curve 8520's screen faded to white. I immediately did another battery pull, but then the same thing happened again. It did not return to normal until I plugged it into my wall charger.
I called my carrier, Rogers, about the issue and they sent me instructions to do a forced reload. I didn't have my USB cable until today, so I followed all the instructions for the forced reload this morning. After it went through and re-installed the software, I did a restore using the Desktop Manager. I'd been slowly working through re-installing all my applications when it froze up, so I did a battery pull. It did the "white screen of death" again after the reboot. Now it's just happening at random (ie. while waiting for a website to load), but still gets fixed temporarily if I plug it into the charger.
Is there anything else I can try to fix this? I can't exactly carry my wall charger around everywhere just in case this happens.
Another note: I'm nearly 2 years into my 3-year contract and am upset that this device isn't living up to the term. I can't afford a new phone and I don't want to get locked into another 3 years

So it's just happened again, this time without the battery pull. I was downloading the Toronto Maple Leafs app from mapleleafs.mobi, and it was nearly completed when the screen faded to white. This is very frustrating

Premiere Elements 9 "white screen" issue

Hello All,
I recently bought a Canon HFR100 and am new to video editing, and decided to give the PRE9 Trial version a spin..
My issue is, after installing the trial, and messing around for a few days, all of a sudden I get a white screen for a preview, instead of the viewer with the watermark in my editor. if I double click a video file, ANY video file, no matter what video type I chose for my project file, I get this white screen. The audio is playing fine, but no video, just the white screen. (see image for the white area)
I've searched the forum for an answer, tried possible solutions (unistall - reinstall quicktime & Flash, added codecs, reinstalled the trial version. etc)...I just dont get it. Nothing else had changed, to my knowledge.
It's also a new home built machine: Intel i5, 4gb ram, Vista32, EGVA GTS450 Display card....no other problems...
Any help or thoughts would be greatly appreciated. I'm looking for good software to edit my son's hockey games, and I was looking at purchasing the full version, but I'm concerned it I do, I'll have the same problem (if it's a corrupt file, somewhere).
Thanks!

I am having the same issue -- white screen with all video files, can hear audio but can't see any video when previewing thumbnails or rendering previews or video --
I have a different configuration:
Dell Precision M6300
graphics card: NVIDIA Quadro FX3600M
OS: Windows XP
Intel Cor 2 Duo CPU
T9300 @ 2.5Ghz
2.47 Gh, 3.50 GB of RAM
I've updated the driver...
Quicktime...
Disabled my anti-virus...
I've been messing with this since I installed the trial a week ago but still have not been able to get Premiere Elements to work and try. Any suggestions?

ITunes Store 10.5 white screen issue, not working

So I've had zero issues running the iTunes store on my Windows 7 Ultimate 64-bit prior to the 10.5 update, and now all I get is a white screen. I can connect to the Store from my iPhone, iPod Touch, and laptop running Windows XP Professional with the SAME version of iTunes. I tried clearing out iTunes based on other discussions I've seen, IN ORDER, twice, and reinstalling. No dice. I've cleared my hosts file...same issue.
The weird thing is that I can update Apps in iTunes on my PC, which connects to the Store and downloads just fine. I've made zero changes to my network router, port range filtering, and the Windows Firewall has always been disabled. I don't understand how every other device aside from my PC can connect to the Store on my wireless network, but not my PC all of a sudden. I've even tried logging in as the Administrator and clearing out my Local, LocalLow, and Roaming profile of anything related to Apple and iTunes after uninstalling iTunes and rebooting...no change.
Something is wrong with this version running on Windows 7, period, and it needs fixed. I can't redeem codes except on my iPhone and it's rather annoying.

i have the same problem. the store works on my windows vista and my ipod touch just not on my windows 7. i sent a msg to support and they told me to delete itunes,check if there are any updates on my computer and then reinstall itunes but still dont work and i tried it several time and it is really starting to make me realy ****** off. it all started ever sence the last update. i thought this new update would work but still nothig at all.

Palm TX replacement unit has white screen issues even after hard reset

I hope somebody can help me find a solution.
   I was a happy Palm OS user since the early days of Palm III. After a Palm III and a V, had a Sony Clie that lasted a long time, but finally pooped out, went to a Z22 and broke the screen, then almost but not quite a year ago (in warranty, supposedly), purchased a Palm TX. Worked great for a while but ended up with a unit I couldn't turn on or off because the power switch had died. Worked around that by keeping the sync cord in and powering on by pushing the button and then canceling. Finally sent it in for in-warranty repair. Got back a new-to-me unit.
   This worked fine for almost a month, then it started (with no new software or usage patterns) to have blank screen issues. To solve this I have tried many things. Soft resets, hard resets, leaving it to fully run out its battery for weeks at a time. Nothing works; it continues to go blank on me. In addition, the sound is strange and screechy when it beeps (e.g. accepting time zone after reset). I bought the TX in the US when I was home for a visit last July, but am living in the Netherlands currently.
   I contacted the Palm repair center in the UK that replaced my original unit; they said would pass on word of my troubles to Palm and Palm should contact me, otherwise to e-mail them.  They haven't. I can't find an e-mail address for to explain all of this to anyone with any power to help me. I have tried to use the Palm support website to solve this problem, but neither the original serial number or the serial number of the replacement unit I have now is showing up as eligible for warranty repair.  I have tried to call the US Palm support number (http://kb.palm.com/wps/portal/kb/common/article/47005_en.html#howservice), but I get "calling is temporarily unavailable." When I click "here" when asked "If you wish to query the warranty status of your handheld, or would prefer to arrange a repair through our Technical Support service, click here" (https://www.euroservice.palm.com/repair_entry/NLD/EE) I end up on a page that says simply "Please Enter the Source Url." I am hesitant to supply credit card information for an issue that, if it can't be covered under warranty (which I think it should be, since I'm still within the original 12 month warranty period), I may well abandon.
    I am very frustrated in trying to get this fixed. I am disappointed in the dwindling support for a PDA (that is not a phone) with Palm OS. Since I am living (though not comfortably or well) without my calendar, address book, alarm, reader, dbs, cookbook, checklist, etc., I am seriously considering leaving the Palm OS. My preference is to get this fixed, and my idea nearly a year ago was to ride the Palm OS until it disappeared completely (subsumed into phones anyway), but my problems have discouraged me to the point that I am wondering if this is my end.
   Does anyone have a suggestion?
Post relates to: Palm TX
This question was solved.
View Solution.

Thanks for your help!
I don't know how to tell for certain if this is a US or a UK device, but it looks identical to the one I bought in a store in Seattle, and the first five and the last two num/letters of the serial number are identical.  I do know that when I sent it in originally for the power button failure, that the Palm repair center understood that it was a Palm purchased in the States.  Their description of the goods received is "Palm TX , US and ML" so it seems apparent that they knew it was a US device and rather than refusing to repair it, they had me send it to them. And when my repair was returned, the repair details list "unit exchange" and type of unit is again listed as Palm TX US & ML.
Well, regardless, I appreciate your pointing me in the right directions to someone who can help me.
Ironically, I am no longer having the same issues with the Palm.  The latest round of letting the power run out after a hard reset and sit for a few weeks seems to have "fixed" it.  At least, I have been trying to break it (by using it) without success.  Recharged it, synced it, checked and sent mail with it, used all the programs I used to, and I haven't had a white screen in the past few days. Hope my luck continues, but I don't trust it.  All hail frequent syncing.
Thanks again.

Downgrading to 7.0.1 did not solve the white screen issue.

Hello -
A little background - in early January, with a thesis presentation due, I delayed upgrading to Quicktime 7.0.4 until after the thesis - this was a good idea, because now after upgrading and downgrading again, I've got problems.
I made a video with Final Cut Pro - (assume I can no longer go back and output it again) and have the file as a .mov. Before upgrading, thesis era, I threw it into iDVD and got a DVD.
NOW I need to make more copies of the DVD so I go about re-creating the dvd in iDVD with the exact same files... and the video comes up blank. both in quicktime AND in iDVD.
I downgraded from 7.0.4 to 7.0.1 - but that did not solve the problem completely... sure, I get my audio back now, but the film is entirely white-screen...
I'm under a massive time deadline to make more copies of the DVD and I'm at a loss os what to do! Please help!!
I'm already deleted the receipts, downgraded from 7.0.4 -> 7.0.1... no fix.
tried going back to 7.0.3 from 7.0.1... no fix.
went BACK to 7.0.1 again.... no fix...
HELP!!!! t
thanks

There's a good chance that you're doing something unusual and risky with JavaScript. For us to figure out the problem you would need to allow us to use your web app and tell us where it is.
Given the tags you're using you understand tech talk and rathr than posting to 'iPad in Business and Education' you're better off posting in a developer forum. You could try the public one that's part of this list
https://discussions.apple.com/community/developer_forums
or the more private ones which are part of developer.apple.com, for which you need a developer account.

IPod shows white screen (issue?)

My 8GB Ipod touch 4th gen has locked up. Shows me a solid white screen and will not show anything. Is there a way to reset it? I tried to hold the main home button and the button on top and no luck HELP PLEASE>.....

well This did not help me... The screen is still solid white and I can't get it to do anything in reference to restarting. I can only look inside of the Ipod folder whenb my computer sees it when USB is plugged in. Any other thoughts?

X3 white screen issue

Ever since I got my phone it would periodically turn to a blank white screen and slowly come back, but it would take a minute or 2 to let me open my messaging inbox/outboxes yet everything else worked fine after the screen came back. Now it is occurring several times daily, and I have tried things such as factory reset, but the problem won't go away, Any ideas?

Update to latest firmware, if update is available for your device.
Previous Phones: 6600, 7610, 6230, 6230i, 1100, 1112, N70, N73, N95, N95 8GB, 5800XM, 5230, C5, iPhone 3GS, SE Xperia X10, N900, N8, SE Xperia Arc
Current Phones: Nokia N9, iPhone 4

E66 White Screen issue

Hello guys,
I just got an E66, but I already found my first problem. Sometimes, when the phone is on standby and I want to use it again. it gets stuck with white screen and then I have to wait like 1-5 minutes (it depends) to use it again... pretty annoying...
Hope there is any solution.

try resetting your phone, dial *#7370#. if it asks for a code, default code is 12345
Please backup your data first. Dialing above code will erase phone memory.
P.S- DON'T BACKUP SETTINGS, SETTINGS MAY CONTAIN ERRORS
Glad to help

Request Money White Screen Issue

Hello, i am using the new PayPal interface and whenever requesting funds the "review" page is just a white screen, tried on Different Browsers and different devices. Google Chrome error console reposts a 404 error accessing paypalobjects.com if that helps Thanks Tom

Try the white screeen topic of:
iPod touch: Hardware troubleshooting

White Screen issues

Similar Messages

Maybe you are looking for