White screen (no visual but perfect audio) in all exported clips

This is driving me crazy! For the last 3 days I have tried everything I can think of to export my sequence. I previously posted this:
"I'm trying to export a 12 minute sequence using quicktime conversion in FCP. Format is HDV 1080i50.
I've attempted to do so 5 times now, and each time, it gets to 7% quite fast and then doesn't move for hours. After a few hours FCP just closes and says: the "FCP application quit unexpectedly. Try again or report"."
Since then, I was able to export a QT movie (or finalcut mov file, self contained) and have tried to converting it to every format possible in both compressor and visual hub. No such luck.
All i get is a white screen where the visual should be, while the audio places perfectly. Does anyone know why this keeps happening? I would think there's something wrong with my project settings, but I was able to get a low quality QT movie out of compressor (and both SEE AND HEAR it). However the file size is too small for me to use and the other formats won't seem to work.
If anyone knows why this happening I'd would REALLY appreciate the help!!!!
Thanks,
Chelsey.

Yes, I'm only getting the white screen in the exported files... I can view the clips in the final cut viewer whilst editing.
This RANGE CHECK thing - where exactly is it and how do I turn it off?? I've seen this mentioned before.
Also, if the problem is QT 7.3, can I just uninstall this rather than FCP... but I suppose old versions aren't really available anymore. And it doesn't really explain why it has worked in the past.
Thanks everyone for all your suggestions.

Similar Messages

  • White screen of death but can see screen when hold down power button?

    I've had my iPod Touch 4g for a few months (in December it will be a year) and for the past two months, I haven't been able to use it because of the white screen of death. I tried reseting it, restoring it (which didn't work because of error 1394 or something like that) and NOTHING seemed to work. Today, I decided to try restoring it again, and it worked!...for all of two hours.
    Now I have the white screen of death but it shows the screen if I lightly hold down the power button (not enough that it clicks).
    I've tried restoring it again, but it stays the same- white screen of death that shows the screen when I lightly hold down the power button.
    Can anyone help me :\

    Contact Apple and get it replaced/serviced.
    Basic troubleshooting steps  
    17" 2.2GHz i7 Quad-Core MacBook Pro  8G RAM  750G HD + OCZ Vertex 3 SSD Boot HD 
    Got problems with your Apple iDevice-like iPhone, iPad or iPod touch? Try Troubleshooting 101

  • My macair won't turn on. when I try to turn it on, the white screen appears. But instead of the apple logo, there is a flashing folder that has a question mark on it. how do i fix this?

    my macair won't turn on. when I try to turn it on, the white screen appears. But instead of the apple logo, there is a flashing folder that has a question mark on it. how do i fix this?

    Try this.
    Erase and Reinstall OS X
    Note: This will delete all data on the disk. Back up important files before continuing.
    Erasing and then reinstalling OS X can give you a fresh start, making your computer exactly as it was whenever you received it from Apple. This can solve various problems such as corrupt system files.
    Shut down the computer by going to Apple () > Shut Down…
    Select Shut Down or allow the computer to shut down automatically.
    Plug in the MagSafe power adapter into a power source and then connect it to your Mac if you have not already done so.
    Press the Power Button to turn on the computer.
    Press and hold both the R and Command (⌘) keys on the keyboard until the Recovery partition loads.
    Select Disk Utility and then choose Continue.
    Select your startup disk (Macintosh HD by default) from the left.
    Select the Erase tab.
    Choose the Format pop-up menu and choose Mac OS Extended (Journaled), enter a name for your disk, and then click Erase.
    After the disk is erased, choose Disk Utility > Quit Disk Utility.
    Select Reinstall OS X and then choose Continue.
    Follow the instructions.
    I hope I solved your question.
    Austin

  • I have and ipod touch 4th gen that has the white screen of death but my home button doesnt work. how do i reset it?

    i have and ipod touch 4th gen that has the white screen of death but my home button doesnt work. how do i reset it?

    Restore, if iTunes will let you.  Everything except the password will be restored.  Connect via cable to the computer that you use for sync.  Be forewarned that it takes a long time.  From iTunes, select the iPad/iPod and then select the Summary tab.  Follow directions for Restore and be sure to say "yes" to the backup.  You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPad/iPod.  Again, say "yes."
    At the end of the basic Restore, you will be asked if you wish to sync the iPad/iPod.  As before, say "yes."  Note that that sync selection will disappear and the Restore will end if you do not respond within a reasonable time.  If that happens, only the apps that are part of the IOS will appear on your device.  Corrective action is simple -  choose manual "Sync" from the bottom right of iTunes.
    If you're unable to do the Restore, go into Recovery Mode per the instructions here.

  • N97 White Screen .. Phone wont boot at all ... Stu...

    Hello all,
    So I have finally stumbled upon the White Screen of Death ... Really sad that it happened but I still have hope that it may work. THe phone does not boot up and its stuck on the Nokia logo
    [Long read]
    It happened one before a day and I managed to find a helpful topic
    /discussions/board/message?board.id=smartphones&thread.id=141381
    It had everything regarding reset codes and whatnot, but the really helpful message was from grschinon .. ( he seems to know what hes doing ) .. for he shared an amazing technique of holding the green and red buttons while booting up the phone, and it worked !!
    But yesterday, it happened again  .. The screen wont light up and the keylock was stuck, so I just removed the battery ... I turned it on while assuming that the red/green button technique will work, but it didnt
    I tried it over and over again ( been trying for half a day actually ) .. but with no avail, it didnt work ..
    I tried connecting it through usb, with the wall charger, different combinations of buttons ... meh none worked 
    Its really annoying that half of my friends keep saying, THIS is why you get a blackberry .. and similar stuff .. My previous phones are all Nokia and this is just a huge dissapointment .. the N95 is 500000 times better than the N97 in stability and etc ... I was anxiously waiting for v2.0  ... now my n97 is dead 
     [/Long read]
    I understand that there is a solution that will FORMAT the whole phone, but I dont want that, there are lots of pictures on my internal memorycard (32gb one) and 30+ applications (if not more) .. I seriously dont want to lose all of those ..
    So do you know any other way that I can fix the problem ?? Is there a soft reset combination that i can use rather than the hard reset one??
    Please advise, your comments are really appreciated,
    Kind Regards,
    Z
    Message Edited by ZaZu90 on 10-Oct-2009 12:08 PM

     These are the solutions that i've colected over the internet:
    I hope it help's you!
    N97 White Screen .. Phone wont boot at all ... Stuck at Nokia logo
    They instructed me to turn on the phone pressing the green, red and camera button at the same time as I pressed the power button.
    It worked and the phone started.
    I didn't need to format my phone.
    Had the same problem with my White N97 (not that the colour probably makes a difference).
    Was using the Facebook App on the main screen as a widget, tried to start it up by touching it - it seemed to not start even after waiting or trying multiple times.
    So i thought to myself, "I'll just reboot my phone, that should fix it."
    BAD IDEA.
    Got stuck on the White Screen with the Blue "NOKIA" on it, so i thought...i'll wait and see what happens.
    Nothing...for hours.
    So i pulled the battery and put it back in again....powered on....same thing..."NOKIA"...and nothing else.
    Repeated this about....10 times, getting more and more nervous that i had turned my $950AU phone that i had boasted to my friends that is better than their iphones....into a useless brick.
    So, i turned to Google looking for answers...
    Someone said they left the battery out of the phone until it went flat and had some success.
    I found something about other users having a similar issue with other software  (Garmin GPS software), and also the "Mail for Exchange" application.
    They mentioned something about the only way to get it working again was to hard reset the phone to stop the apps from going online...
    I REALLY didnt want to do a hard reset, as i had a bunch of apps and data that i DID NOT want to lose or spend like 3-4hours re-installing.
    SO...I got thinking...how can i stop my apps from trying to go online without a hard reset.
    So this is what i tried - and it worked!
    1- Power off phone (if power button responds)
    2- Pull out battery.
    3- Remove memory card (if you have one)
    4- Remove SIM card.
    5- To make sure phone has no residule power hold down power button without any of the above inserted.
    6- Re-insert battery only (without SIM card or Memory Card)
    7- Cross your fingers and toes. (optional...but if it helps what the hell.)
    8- Power on phone.
    9- IF the phone prompts you to go online in any way Select NO. (or if it says do you want to activate Offline mode say YES)
    10- Press Options key when you get to the home screen and select "Content to offline mode"
    11-  Make sure "Offline" is displayed in top left corner near where the signal bar usually is. ( if it doesnt say "Offline" press the power button briefly, and select "Offline" (should be underneath the "Pager" profile)
    12- Once you have made sure your phone and applications are in offline mode - Power off phone using Power button.
    13- Remove battery
    14-  Again to make sure phone has no residule power hold down power button without any battery or cards inserted.
    15- Re-Insert SIM card, Memory card and Battery.
    16- Power on Phone.
    At this point the phone should start up as per normal, I knew it was working straight away for me because my SIM card prompted me for a pin number. (which happens normally for me when I turn on my phone)
    After the phone is ready, i just put my phone back into online mode by selecting my "general" profile, and put my content back online.
    Please note: This is what worked for me. Results and Mileage may vary.
    It seems the issue is that the phone startup is being held up or stopped due to Programs or Applications tring to go online.
    For me I suspect it could have been the Facebook App due to the problems i had before powering off my phone the first time.
    I am going to put my Content to offline mode if I need to reboot my phone again, at least until nokia pull up their socks and release a fix for this.
    Side note: my N97 is also running Version 11 Firmware. ( not that it may make a difference)
    Good luck to all with same problem, hope this works for you too.
    Had the same problem but I just removed the extra memorycard and formatted it on my computer before I put it back...
    after a few days trying without micro sd inserted
    the result is, n97 still stuck in white screen nokia logo
    it happend always if i turn off my phone without sign off the facebook app widggetz..
    here is how to crash your phone
    put facebook widgetz on nokia standby screeen
    and then put it online mode
    klik the facebook app
    just do anything in your facebook for check it already connected
    klik end key
    now turn off your phone without sign out the Facebook
    turn on again
    and boom your phone will stuck on nokia white screen logo
    and it will never boot forever..
    sometime when you take off the batery and reinserted again it can boot normaly but the percentage is 20% only..
    soo if your n97 can boot normaly after FB "accident" that mean you lucky and i sugest you unistall your FB ASAP before n97 stuck again on white screen nokia logo..
    is anyone have problem like mee??
    i like to hear another opinion...
    i think nokia already knew this problem, that way when you check ovi and your phone set to nokia n97 the facebook app is missing...
    my firmware is v11 already

  • White Screen with sound but no visual

    I just brought home my new imac a couple weeks ago and today was
    my first time uploading videos from my flip camera. On my old mac
    laptop (ibook g4) i was able to upload and view them immediately.
    But now on my new mac, i get nothing but a white screen and the
    audio.... what component do i need to install to see my videos...
    I've checked the flip video on another computer so its not happening
    on the flip site, but only when i try to play and view the videos
    on my new mac...
    Please help.. i want to use the new imovie to edit and create, but cant
    since quicktime doesnt show any visual....
    thanks
    Chaunna

    Having the same problem, but when I import my QT into Final Cut I can see them... I don't know how to fix the QT error, but until someone gives you an answer, you should be able just to import into IMovie and preview from there.

  • Laptop wont startup when I turn it on..white screen comes up but wheel just keeps turning

    Hi my laptop wont startup after I turn it on..The white screen with the apple comes up and the wagon wheel just keeps on turning.

    What cat flavor does your Mac have? Lion? Mountain Lion? Older cats?

  • Why do I have audio onIE but no audio at all on Firefox 4 or 5??

    I have tried all the trouble shooting and still nothing. When I try to watch youtube or a news clip, I have video but no audio. When I close Firefox and go to Internet Explorer, the same videos work fine with that browser and I have both audio and video

    VLC is a great, Free, player -> http://www.videolan.org/vlc/
    But changes are if you have no sound, you did more than uninstall a player, you uninstalled the driver....

  • Why does Premiere Pro CS5 process audio source before exporting clip in AME CS5?

    Hello everyone, my first post here. I am currently trying out the trial CS5 Master Collection on my MacBook Pro. I've been using Premiere Pro CS5 to put together family videos. I select a certain portion of a sequence and queue it for export in Media Encoder CS5 in the format H.264 for iPod with video and audio.
    Now in AME I have a queue list of about 5 clips from the sequence. But when I hit the Start Queue button, the bottom left of the progress bar states "Adobe Premiere Pro processing audio source from [then file name]"  for all 5 clips from the sequence then creates the first output file.
    Then it moves to encode the second and again states "Adobe Premiere Pro processing audio source from [then file name]"  for all 5 clips of mt sequence then spits out only the second output file.
    This continues for the remaining 3 output files. The total sequence length is ~32 minutes with transitions and it takes about 35 minutes to export which is all consumed by the process audio source of the 5 clips in my sequence for 5 separate times.
    Is there a certain reason why Media Encoder or Premiere Pro does this process of audio source? Is this process necessary or needed? I experimented with choosing different output formats but the results are the same. Any help would be appreciated, thanks.

    Now that's pretty good follow-up to your first post, and quickly too! Nice detective work.
    As you have found, there is basically a Render/Replace operation going on in PrPro, to get the material in the correct form for AME.
    Thank you for reporting, as it saved me, and others, from basically saying what you said.
    Good luck, and sorry that you beat us to the punch.
    Hunt

  • QTVR - White screen when loaded, but hotspots active

    Hi, I'm hoping someone can help me with the following problem. I am showing quicktime VR movie in a HTML page, using the following code:;
    This is in the head section:-
    <script language="JavaScript" src="Scripts/AC_QuickTime.js"></script>
    (Appropriate javascript file, downloaded from Apple, is in the Scripts folder.)
    This is in the body section:-
    <script type="text/javascript">
    QTWriteOBJECTXHTML('Media/VR/SCO011VR.MOV', '600', '300', '',
    'autoplay', 'true',
    'align', 'middle',
    'Hotspot13', '../../CTS253_PMS_00_Sco011.2_Cde001V01.htm',
    'Hotspot172', '../../CTS253_PMS_00_Sco011.4_Cde001V01.htm');
    </script>
    When run it only shows a white inset window where the VR should be - it appears to have loaded the file as the hotspots are active (cursor changes when moved over them), but I need to click on the white area to show the actual image/panorama.
    Same problem occurs whether using above code or doing a simple 'embed', but the above method avoids the I.E. activeX prompt. (am using I.E.6 & QT 6.5, and developing the HTML page on a PC).
    Inserting a normal quicktime movie works fine, suggesting a problem with the VR files. I am using an old MAC with Apples quicktime VR authoring software to produce the VR, & this is the first one I have done, but I have tested an old VR file produced by another employee a couple of years ago for a different purpose, and get the same problem.
    Any help would be much appreciated, as this is for a work-related project which needs fixing asap!
      Windows 2000  
      Windows 2000  

    (I'm trying to restore from backup)

  • .mov to .mp4 produces visuals but no audio

    Hi
    I am trying to convert a quicktime movie to ipod format. When it converts and I open in itunes there is no sound just the visuals. The .mov has audio though when i view in QT?
    Also, are .mp4 the only formats ipod can recognize? If I do in fact post the .mov podcast to itunes, will itunes viewers be able to view the .mov on their ipod and in the itunes interface?
    thanks

    The video formats that the iPod (and iTunes by default) can use are listed in the iTunes Podcast Spec:
    http://www.apple.com/itunes/store/podcaststechspecs.html
    iPod can play the following video formats:
    * H.264 video, up to 1.5 Mbps, 640 x 480, 30 frames per sec., Low-Complexity version of the Baseline Profile with AAC-LC audio up to 160 kbps, 48 Khz, stereo audio in .m4v, .mp4, and .mov file formats
    * H.264 video, up to 768 kbps, 320 x 240, 30 frames per sec., Baseline Profile up to Level 1.3 with AAC-LC audio up to 160 kbps, 48 Khz, stereo audio in .m4v, .mp4, and .mov file formats
    * MPEG-4 video, up to 2.5 Mbps, 640 x 480, 30 frames per sec., Simple Profile with AAC-LC audio up to 160 kbps, 48 Khz, stereo audio in .m4v, .mp4, and .mov file formats
    Another good question is how are you converting your video. QT Pro has built in export templates to create files for iPod video. I'm sure that FCP and other Mac applications have similar.
    Erik

  • I am taking college classes online and my instructors are using adobe reader for their presentations.  Through safari..I am getting visual but no audio, and through google chrome..I am getting neither

    How come I am not getting audio with my adobe reader.  I have downloaded it and removed it several times but still I am not getting any sound.

    I believe both of those browsers use their own plug-in for pdf files.
    You can fix that. Here's how for Chrome: Adobe PDF plug-in - Chrome Help
    Safari: Troubleshoot Safari plug-in | Acrobat X, Reader X

  • Everything plays perfect (audio & video). Mute clips after exporting (sounds fine when not exported)

    Alright... this is the 1st time I use Adobe Premiere CS5.5, and I´m using the trial version.
    I hope the image I uploaded is clear, but if I click PLAY while I ´m using the program, everything plays absolutely perfect.
    Problem is when I export. If you can see there, there are like 7 audio bars there, I don´t know if that could be a problem, but I can´t seem to put all of them into a single track.
    The main audio files DO play in the exported movie, but many others do not...
    Any help??? I really need to fix this.

    Microsoft AVI
    preset: custom
    Audio coded: uncompressed
    Channels : stereo
    sample type: 16bit
    Video codec: DV PAL
    ASPECT: D1/DV PAL(1.0940)
    (CHECKED): use max. render quality
    use frame blending
    use previews
    (not checked) render at max. depth
    I hope this is helpful

  • How can I change the video but continue audio from the first clip?

    I have a clip of a guy playing the guitar.  I want to cut away and show clips of the audience..... so how do I separate the audio and video so that we still hear him playing as the video clip changes?  I do hope it's easy!!! :-)  Thank you for any help. 

    bnn is right. Also make double sure you have turned on the Advanced Tools under the iMovie Menu > Preferences. Choose the General Tab and click the checkbox beside Show Advanced Tools. This will enable that pop-up menu that includes Cutaways as an option.

  • *~*Slideshow exports with music but blank white screen!*~*

    The details:
    I'm using iPhoto '09 on a mid 2009 MBP, Lion 10.7.2, 2.35Ghz, NVIDIA GeForce 9400M 256 MB, 4GB RAM DDR3, 320GB HDD but now 108 GB free.
    I have 176 photos in the slideshow, all .jpg. Using the Scrapbook theme with a "Custom Playlist" (selected from iPhoto's Slideshow music browser/settings menu thingo) of 3 songs -one is the theme's default song, the other 2 are mine from iTunes Library.
    Exporting to .m4v using the "Display" quality setting. Takes forever, about 1.5 - 2 hours, at the end in the final export there's either a blank white screen and the music works, or it all works up to one point and then the screen goes white and the music chages abruptly to the nexrt song.
    Am I doing anything incorectly, or is there something I might be able to try in an attempt to fix this?
    Advice or help so, so greatly appreciated

    Yes the track details were written in English, thanks for your response. And they weren't tracks with DRM.
    I ended up solving it ... can't be specific about what resolved the problem because I tried multiple things.
    I heard there was a problem with iTunes 10 and iPhoto 'talking' to eachother, so I copied my songs over into the iPhoto theme music folder (in Application Support >> iPhoto Slideshows) and selected them in iPhoto by clicking "Music" and, this time instead of clicking iTunes, I used the default themes folder/drop-down selection. I then exported via clicking the Export >> Custom Export button and selected .mov with Apple Intermediate Codec, changing the FPS to 25 (someone said to do this in another thread, it wasn't about the same problem as mine but I tried it anyway. I'm not a techie person but it also may be important to justify the choice of 25FPS by saying I'm using PAL ... I think that has something to do with the FPS?!)
    Anyway, after all that, the final export played back perfectly! Hope this is able to help anyone out there who may have the same problem. I exported two different slideshows, one had about 150 more photos than the other, so I can safely say the successful export wasn't a fluke!

Maybe you are looking for