White screen of death and reboot loop help!!!

I have a problem with my curve, I have a white screen of death. This happens whenever I turn on my blackberry. Also my phone is stuck in a continuous loop of it rebooting, loading up showing the home screen and then rebooting again. What do I do? i have tried battrey pulls and pressing on the corners of the screen

Deal with the rebooting first.  If you have a media card installed, remove it and test.   If it isn't the media card that is the problem, see if you can reboot in safe mode, then do a a full backup.   While in safe mode, after the backup, you can try removing any apps or themes you added and then test.  Ultimately you will probably end up reinstalling the OS.
Once you have the device booting up and staying on, hopefully, see what you see.  If the screen is all white with no text or icon, you have a hardware problem with a connection to the display.   
Caveat: If have gotten the device wet or dropped it, all bets are off.
- Ira

Similar Messages

  • Having an intermittent issue where my iMac blanks out on me. On restarting I get bands running down the screen with pixels jumping around, then the white screen of death and nothing... Wouldn't restart all weekend, now fine..? any ideas whats wrong?

    Having an intermittent issue where my iMac blanks out on me. On restarting I get several bands running down the screen with pixels jumping around within the bands, then the white screen of death and nothing... This happens intermittently and usually restarts OK. Happened again three days ago and wouldn't restart for two days (again the bands/pixels etc) but now operating fine? Any ideas whats wrong with my iMac and what the solution may be? Also gets very hot from time to time, particularly if I'm playing music/watching youtube/movies for extended periods. Mac is 3.5 years old, running OS X 10.6.8, processor 3.4 GHz i7 memory 8GB 1333 MHz DDR3

    If you live near an Apple Store, make a Genius Bar appointment to have the computer tested. Supposedly there is no charge for testing. Use 2nd link if not near an Apple Store or aren’t in the US.
    Genius Bar Reservation US
    Authorized Service Provider

  • MBP 2011---White Screen of Death AND MORE!

    Hello,
    So I've got the white screen of death on my later 2011 MBP. I've been reading all the other forums and the other discussions for the last 3 weeks and I know what I have to do to get it to at least boot up, but it will not work. I tried all the reset ram options, I tried booting my computer in recovery mode but it wont go in any modes. I connected it to another MBP in target mode and repaired the disk after the verification failed and it still didnt boot up or let me go into any recovery modes. I did the target mode again and ran the repair and verify another two times. I then erased everything on my hard drive while in target mode using the disk utility erase function and now this is where I am...stuck! I don't know if that was the right thing to do it was probably in haste but I am stuck and need some help. Pleaseeeeee!

    Thank you for your replies...
    jmrmb80 - Yes the device is still recognized by the Desktop Manager.  I reloaded the OS on it this morning and the App Loader says it was successful - but on reboot the white screen loads and thats it. 
    billrobinson - I haven't dropped the phone since I bought it.  I wish I had b/c then I could blame it on something.  My friends drop their phones all the time, spill stuff on them etc.... and I do nothing - and my phone blows up  

  • My iPod touch 4th gen has the white screen of death and won't connect to iTunes to restore.

    I was updating from iOS 6 beta 1 to beta 2 when my ipod froze up and started showing the white screen of death. I've tried the trick where you hold the power and home button for ten seconds and tried to put it in DFU mode to restore. None of these tricks work and my screen is still white. Also I plug it into my Windows Vista computer with iTunes 10.6.3 but it wont show up. I really need help. I don't have warranty or money to buy a new one. My grandmother will heartbroken if $200 goes down the drain.

    Im not developer and I have ios 6 click this link http://www.youtube.com/watch?v=kHvf6Wty0nk&feature=plcp but anyway try putting it into dfu

  • White Screen of Death and Wipe Did Not Work

    Hello - 
    I purchased my Blackberry 8900 a year ago and TMobile is my carrier.  
    I experienced a white screen of death on my Blackberry 8900 last nite while talking on it. It just dropped the call and the screen went white.  I shut it off then back on, white screen appeared after reboot.  I pulled the battery and left it out for 15 min, inserted it again and rebooted - still white. 
    I searched online and found a lot of info. My phone is recognized by the Desktop Manager software.  I was able to back up all of my data and applications.  I deleted all of the data on my phone through the DM as well (or thought I did - I can't tell if it worked or not).  I downloaded the current version of the OS from TMobile for reinstallation.  
    I downloaded JL Cmder to fully wipe the phone.  JL Cmder did not work on my home machine (Win 7) but I finally got it to work on my work machine (Vista) today.  
    I selected the wipe option (4) and JL Cmder successfully connected with the phone.  The phone rebooted and I got happy, but on phone reboot I did NOT get the "507" error all of the how-to sites say I'm supposed to get.  The phone rebooted with the same white screen and no error message.   I've run the wipe command from JL Cmder a few times on the phone and it connects, reboots but I still get the white screen with no error message.  
    Is there anything else I need to do to get this 507 error?  Or is my phone really dead?   
    I want to do what I can before I shell out more $$ for another phone.  
    Thanks in advance. 

    Thank you for your replies...
    jmrmb80 - Yes the device is still recognized by the Desktop Manager.  I reloaded the OS on it this morning and the App Loader says it was successful - but on reboot the white screen loads and thats it. 
    billrobinson - I haven't dropped the phone since I bought it.  I wish I had b/c then I could blame it on something.  My friends drop their phones all the time, spill stuff on them etc.... and I do nothing - and my phone blows up  

  • White screen of death and computer halts with ATI 4870 in Boot Camp

    Hi!
    I have just received the ATI Radeon 4870 for my Mac Pro (Early 2008)and have upgraded my Leopard to 10.5.7 and works fine on the Mac side. When I reboot and hold the command key I can see my MAC and my BOOT CAMP 2 options as always before. When I click on boot camp I get a white screen with a black frome around it and there is NO hard disk activity and nothing happens no matter how long I leave the computer alone. Before I had no problem booting into my boot camp loaded with vista 64 bit. I have another partition with parallels and that is fine but not this boot camp partition.
    I am using ONLY this card in the system. I removed the NVIDIA card.
    ALso I tried putting in my Vista 64bit DvD into the drive and rem=booting and see the option when hold the option key to go into MAC,WINDOWS,DVD.... When I select DvD and computer adjust to work in a windows enviroment again the system halts. SO I believe it has nothing whatsoever to to do with drivers inside Vista. It would have to be something that needs upgrading for bootcamp to allow for this video card to work on Bootcamp?
    Again I have the latest updates of the OS.
    Any suggestions?
    Thanks for all your time!

    CorkyO recommended what I would do: install old card, uninstall any graphics drivers and delete them, and use Driver Sweeper as well. So that there is nothing there.
    If you have a raw unformatted drive, pull everything else and leave that in.... as if it was a PC and starting for the first time.
    Don't use Boot Camp Assistant.
    Don't put Windows on the same drive as OS X.
    Do try Windows 7.7100 RC 64-bit.
    Apple has not posted a link to graphics drivers since early 2008.
    http://support.apple.com/kb/TS1442 - "Not found" and WAY out of date (167.xx) which would be foolish and obviously would not support Vista or 4870.
    I would pull the Vista drive for another reason, too, so you can start fresh and import or access the files on it later.
    Vista is sensitive to the presence and drive position of where the drive and OS was, the master boot record and such which I confess to not fully understanding.
    Which is another reason to install Windows with no other hard drives present.
    You keep saying you used COMMAND rather than OPTION key to restart into Windows, so figure typo/slip.
    I would RESET SMC and ZAP PRAM/NVRAM. Force the device tree to get rebuilt. And that is important to OS X - suppose to do so but the G5s it never worked properly on its own.
    There is a reason why people that play with graphics cards and drivers use Driver Sweeper, it works, and it is essential at times.
    Early boot is under the control of EFI. I don't know what if anything Apple does (I don't trust the firmware updates that were suppose to provide better Windows compatibility only to learn it was mostly for XP and not Vista, and that it added a full 30 seconds to my boot routine into Windows - where EFI + Boot Camp does make Windows think there is a traditional BIOS.... my best summary guess.
    Work with the only factual symptom: pulling one card and putting in 2nd is causing a problem.
    EVGA Guide to troubleshooting graphics drivers and cards:
    http://www.evga.com/forums/tm.asp?m=396474
    Latest ATI Catalyst Vista/Windows 7
    http://downloads.guru3d.com/ATI-Catalyst-9.5-Windows-7-
    GURU3D Driver Sweeper
    Driver Sweeper 2.0 beta (I'd use this instead.)
    Driver Sweeper forum:
    http://forums.guru3d.com/forumdisplay.php?f=29
    GPU-Z (latest)
    http://downloads.guru3d.com/GPU-Z-0.3.4-download-2073.html
    http://downloads.guru3d.com/

  • White screen of death and wont connect to computer

    Ok, so today my phone decided to freeze when I tried to unlock it. I tried resetting it by removing the battery and now it gets stuck on a white screen when I turn it on.
    After the battery is put back in, the red light comes on for a bit, then the phone loads up and sits on the egg timer for a while before going to a white screen with a yellow light flashing (but that might just be because it needs a charge)
    Iv looked around the internet for help and can see that I need to connect it to the desktop manager however my mac wont recognize the phone and all the tutorials I find are for windows. Is there a way to force my computer to recognize it? (bearing in mind I cant access ANYTHING from the phone)
    So if anyone could help me answer this question which im sure has been answered thousands of time then I would be extremely greatful! 
    I hate this phone. 

    Hi alexonline,
    Welcome to BlackBerry Support Community Forums.
    Try following this KB article to reload your device software. You may need to allow up to 10 minutes for it to be detected by the Desktop Manager. http://bbry.lv/aPab3B
    -FS
    Come follow your BlackBerry Technical Team on Twitter! @BlackBerryHelp
    Be sure to click Kudos! for those who have helped you.
    Click Solution? for posts that have solved your issue(s)!

  • TS3694 4th Gen ipod white screen of death wont reboot!

    basically ipod touch 4th gen never dropped white screened during ios update tried all the button pushing all the fixes on here etc. didnt work so i did a hard reset through itunes it goes all the way through says verifying ipod restore then says to wait for ipod to restart but it never does! just stays off after it shuts itself down anybody have any ideas? dont tell me to put it into dfu mode (already did that) or take it to apple (there are no stores anywhere even close) an im not paying to have it sent in theres got to be a solution that someone knows of!

    ive saw many posts from you lllaass an they are all for level points you dont read the orginal post an you also no nothing besides hot to put into dfu and restore modes i already said im not paying someone else to fix it someone has a solution just not you so if you have no help go away

  • HT1212 my ipod has a "White screen of death" and i havent backed it up yet im trying to do it now and im not getting anywhere with it is there anyway i can with the white screen?

    My ipod touch fourth generation cannot connect to my pc for me to back it up because i havent typed in the passcode i am unable to type it in because of my "white screen" is there any possible way i could do this without a passcode?

    Try:                           
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try another cable
    - Try on another computer                            
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar                                     

  • Resently got white screen of death, and want to know how I can fix this

    I was over at a friends house and my ipod dies from lack of batterie, and I plug my Ipod touch into his laptop with the USB cord and I walk away thinking everything is ok. I come back and unplug it, this white screen has come up and I'm unsure what to do next from this point. I have looked up possible solutions but this hold the power and home button restart process doesn't work for me, still more white screen. I have tryed restoring my Ipod but it says an error occured and i could not restore it to factory settings

    Have you looked here:
    iPod touch: Hardware troubleshooting
    What was the specific error you received? See the following for different error messages.
    http://support.apple.com/kb/TS3694

  • My ipod touch has the "white screen of death" and the thing where you press the home and power button at the same time dosent work. How do i fix it?

     

    Try:
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try on another computer                            
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
      Apple Retail Store - Genius Bar                              

  • White screen of Death. Reinstalled OSX Maverick but data is missing. HELP!

    Help! i had a white screen of death on my iMac. Did a check via disk utility and the hard drive seems to be fine. I have partioned the hard drive into two volumes previously.
    However, when I tried to reinstall OSX Maverick on the first partition, where it was originally installed, it was pointed out as being full and I was forced to reinstall it on the second partition. No problem with that.
    However, when I start up the iMac, there are no files to be found. And this is really very upsetting to me as they contain memories of my family which I really treasure.
    Am I doing anything wrong?  When I go in to the set up utility and try to select partition 1, it will still give me the white screen of death and that the disk is full
    Kindly advise if there is anyway for me to "force" install it on partiton 1 and regain access to my files.

    If you reinstalled onto the second partition and used the same username/password combo for your admin user account, then you can boot into the voluime, open up the original volume, and drag your data from it to the same places on the second volume. To reinstall, you need to remove stuff from the full volume.
    The following articles have some good tips:
    Freeing space on your Mac OS X startup disk and
    Freeing Up Hard Disk Space

  • IPod Nano white screen of death - RESURRECTED! :D

    Alright, here's the deal...A friend of mine has a new iPod Nano and gave it to me because it had stopped working, and was hoping it was worth something to recover. Sorry about the long story!
    It _wouldn't_ turn on. But, when connecting it to the computer via the USB dock cable, it comes on for a few seconds on a grey-whitish screen. Then turns back off, reboots, and tries again. Step 1 step 2. Nothing.
    Although, 'Diagnostics mode' or whatnot it is, does work however. It would still be a faint grey screen, but whiter and more vibrant, as if it's saying "Hey, I'm alive! I'm alive!!!" and I can go through settings and make it (sometimes) change colors, and reboot the iPod.
    I was thinking since iTunes never recognized it (It was plugged in the whole time) that I would drown in just for the sake of it.
    Well, 3 hours later after attempting to kill the poor thing, it... resurrected itself.
    I'm serious, it really seems to have unbelievably done it. When turning it on, I get 2 beeps, but no restart loop, the LCD stays on the white screen though, BUT, here's the good thing.
    NOW, I hear the system 'click' sounds when using the buttons and such that it's going through the menu, good news so far! It seems like it because after the 'boot' sequence (it appears to boot very fast, strangely).
    The good thing is (kinda) https://discussions.apple.com/thread/1517571?start=0&tstart=0 ... So I suspect that somehow, this method of submerging it under water, letting it dry, blowdrying it, and then leaving it in the heat, somehow restored the SD chip inside of it... possibly only for now... I'm going to use this moment to hopefully get all data off the device, and see for one last time if it's fully restorable...
    I have the power! Ok, so I hooked it up to the wall charger (just put the wall connector on the USB cord) and it now beeps two times, and after about 30 seconds or so, I get to the main menu, screen still white, but I can certainly hear the click letting me know I'm 'navigating' the iPod. It doesn't appear to have any music on it, or maybe it does, but I need to connect some earphones first. Or, it supposed to be display the 'sad iPod' icon, but I just don't see it, therefor, I'm blind as to the status of it.
    I likely guess it's the battery, since every time I disconnect it, it goes dead. Yep, just looked back, still on. Yep, still menu clicking. Yep, I can start it with no problems now. Any clue what I can try to do to resolve this? Obviously it's turning on, and it seems to be doing something, it boots, (apparently) so that's a good sign.
    Please, is there any hope at all in this iPod?  At all?
    AND, IT JUST BEEPED 2 TIMES AGAIN! And I was just typing... why did it do this? (Funny thing is, how it still works!) Is that really the menu button clicking? That would explain it, I mean it only plays the menu clicking sound AFTER about 30 seconds of it 'booting' to the iPod firmware, so it obviously has some sort of life to it. If I hook up my earphones... Holy Mac! I hear music! It's alive!!! It's alive!!! Oh my man!!! Yes!
    It has hope, in a way!
    Atleast, I hope, but it works! Freaking amazing! Jamming to some awesome beats right now, some cool hip hop, sound quality you ask? Great, actually! I don't know how, don't want to know, but it seems trying to kill this iPod actually resulted in it being resurrected? How? Who knows! This is awesome! iPod truly CAN have 2 lives, I guess!
    Cool stuff, I swear on that! My favorite song was on here too!
    How to adjust the volume on the iPod Nano? I don't care, it's playing at full volume, and it's awesome!
    The sad thing is, it still has the white screen of death, and the battery is apparently fried still (or needs a good 24-hour charging).
    This iPod has been sitting dead as a dud in the storage room for a good 1 year or so, unused. And now it came back to life in a flash. Unbelievable.
    I love you Apple.

    Your problem was moisture. It was wet inside and sitting around for a year let it all dry up.
    If you get this kind of thing happening, speed the process up by putting the iPod into a zip lock baggie with a dessicant (you know those little silica pouches) or even some rice to absorb the moisture. Let it sit for a few days and it should dry it all out.
    i

  • White screen of death iPhone 3GS 16gb

    My iPhone 3GS displayed the White screen of death and was told to restore my phone but iTunes said there was a problem and now my iPhone won't turn on at all.

    That happened to me once and the only was is to fix it is to use recovery mode.
    1. Connect your USB cable to your computer but NOT your iPhone.
    2. Turn your phone off.
    3. When your phone is off, press the home button and connect your iPhone to your computer.
    4. Your iPhone will turn on and keep pressing to the home button. iTunes logo will appear on your screen.
    5. You can start your restoration progress.
    Hope this helps. Thats is how I saved my phone. It also seems to me that the phone you are using right now may had been jailbroken and stopped working.

  • IPhone recently rebuilt - "white screen of death"?

    i recently rebuilt my other iPhone 3g and when i finished rebuilding it and slapped it all back together, i reformated it and it finished but upon reaching the "slide for emergency" screen the phone froze completely for about 10 minutes.
    so i shut down the phone holding home and power and after restarting it again i got the "white screen of death" and now im stuck, help?

    Why was the phone disassembled?
    The problem could be just about anything, you might be out of luck, and I doubt you will get a useful response here as we are iPhone users, not certified Apple techs.
    Since you are probably out of luck with this iPhone maybe check some forums on repair sites to see if you can get an answer.

Maybe you are looking for