White Screen of Death. Need a more in-depth help.

My iPod Nano (6th Gen) has a white screen. The internet calls it the white screen of death. I read a lot of troubleshoots that tells me to do a hard reset. Unfortunately, I am stuck in the part where I have to wait for the Apple logo to come out after holding the Sleep/Wake + Volume Down buttons.
I also tried restoring it using iTunes, but the result is still the same; white screen of death.
Is there anything else I can do to fix this problem?

Deal with the experts and go to an Apple shop after you've made an appointment with the Genius Bar (or you may be lucky and just walk in to be served). They will have a quick look at the phone and give you a refurb replacement straight away if it is found to be faulty. I've had two replacements over the past 18mths (Original iPhone & 3GS) and the service is excellent.

Similar Messages

I have a 13 inch MacBook Pro (2009) & the "White Screen of Death" is present. Need help?

I have a 13 inch MacBook Pro (2009). Recently I bought an extended hard drive because I had used up the memory on my iDisk. As I was running the Time Machine back up on my new extended drive, the battery on my Pro ran out causing it to shut down. Once I hooked up my Pro to the power cord & logged in, the "White Screen of Death" appeared on the home display. Obviously the battery still works, my phone is able to charge along with the extended drive, I am able to adjust the lighting on my keyboard along with adjusting the brightness on my screen, but the "White Screen" remains. I need help in determining the cause of this issue & the steps I'll need to take in order to resolve this. I love my Pro, all my documents, photos & music are on it & the last thing I want to do is kill my wallet by buying a new Pro. So could someone on here please help me? It would be greatly appreciated & I thank you in advance!

Take each of these steps that you haven't already tried. Stop when the problem is resolved.
Step 1
The first step in dealing with a boot failure is to secure your data. If you want to preserve the contents of the startup drive, and you don't already have at least one current backup, you must try to back up now, before you do anything else. It may or may not be possible. If you don't care about the data that has changed since your last backup, you can skip this step.
There are several ways to back up a Mac that is unable to boot. You need an external hard drive to hold the backup data.
a. Boot into the Recovery partition, or from a local Time Machine backup volume (option key at startup.) When the OS X Utilities screen appears, launch Disk Utility and follow the instructions in this support article, under “Instructions for backing up to an external hard disk via Disk Utility.”
b. If you have access to a working Mac, and both it and the non-working Mac have FireWire or Thunderbolt ports, boot the non-working Mac in target disk mode. Use the working Mac to copy the data to another drive. This technique won't work with USB, Ethernet, Wi-Fi, or Bluetooth.
c. If the internal drive of the non-working Mac is user-replaceable, remove it and mount it in an external enclosure or drive dock. Use another Mac to copy the data.
Step 2
Press and hold the power button until the power shuts off. Disconnect all wired peripherals except those needed to boot, and remove all aftermarket expansion cards. Use a different keyboard and/or mouse, if those devices are wired. If you can boot now, one of the devices you disconnected, or a combination of them, is causing the problem. Finding out which one is a process of elimination.
If you've booted from an external storage device, make sure that your internal boot volume is selected in the Startup Disk pane of System Preferences.
Step 3
Boot in safe mode. Note: If FileVault is enabled, or if a firmware password is set, or if the boot volume is a software RAID, you can’t do this. Post for further instructions.
Safe mode is much slower to boot and run than normal, and some things won’t work at all, including wireless networking on certain Macs.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
When you boot in safe mode, it's normal to see a dark gray progress bar on a light gray background. If the progress bar gets stuck for more than a few minutes, or if the system shuts down automatically while the progress bar is displayed, your boot volume is damaged and the drive is probably malfunctioning. In that case, go to step 5.
If you can boot and log in now, empty the Trash, and then open the Finder Info window on your boot volume ("Macintosh HD," unless you gave it a different name.) Check that you have at least 9 GB of available space, as shown in the window. If you don't, copy as many files as necessary to another volume (not another folder on the same volume) and delete the originals. Deletion isn't complete until you empty the Trash again. Do this until the available space is more than 9 GB. Then reboot as usual (i.e., not in safe mode.)
If the boot process hangs again, the problem is likely caused by a third-party system modification that you installed. Post for further instructions.
Step 4
Sometimes a boot failure can be resolved by resetting the NVRAM.
Step 5
Launch Disk Utility in Recovery mode (see Step 1.) Select your startup volume, then run Repair Disk. If any problems are found, repeat until clear. If Disk Utility reports that the volume can't be repaired, the drive has malfunctioned and should be replaced. You might choose to tolerate one such malfunction in the life of the drive. In that case, erase the volume and restore from a backup. If the same thing ever happens again, replace the drive immediately.
This is one of the rare situations in which you should also run Repair Permissions, ignoring the false warnings it may produce. Look for the line "Permissions repair complete" at the end of the output. Then reboot as usual.
Step 6
Reinstall the OS. If your Mac was upgraded from an older version of OS X, you’ll need the Apple ID and password you used to upgrade.
Step 7
Repeat step 6, but this time erase the boot volume in Disk Utility before installing. The system should automatically reboot into the Setup Assistant. Follow the prompts to transfer your data from a Time Machine or other backup.
Step 8
This step applies only to a Mac Pro tower, not to any other model. A dead logic-board battery can cause a gray screen at boot. Typically the boot failure will be preceded by loss of the startup disk and system clock settings. See the user manual for replacement instructions.
Step 9
If you get this far, you're probably dealing with a hardware fault. Make a "Genius" appointment at an Apple Store to have the machine tested.

My screen is completely white, i've tried holding lock and home buttons as seen on you tube something called 'white screen of death' its goes black (think it switches off) then back to the white screen need help fast please!

my screen is completely white, i've tried holding lock and home buttons as seen on you tube something called 'white screen of death' its goes black (think it switches off) then back to the white screen need help fast please!

If you have not done a factory reset on the device, I recommend doing a complete factory reset.
Factory Reset - Warning this will reset device back to original factory settings.
This method will not erase any MDN/MIN information
Turn off the phone
Press Power + Volume Up/Down at the same time and hold until display will show a triage android screen
Display will show:
Reboot system Now
Apply sdcard:update.zip
Wipe Data/Factory Reset
Wipe Cache Partition
Use VOL Down key to scroll down to "Wipe Data/Factory Reset", press home icon to select option and wipe device.
Display shows "All user data will be wiped out", press VOLUME Up to continue or VOLUME Down to exit.
Press Volume Up
Press Home to select "Reset System Now" - device will reboot
If the problem persist I recommend having a store technician take a look at the device.
Copy and paste the link below into your browser's address bar for the store locator.
http://www.verizonwireless.com/b2c/storelocator/index.jsp

MBP 2011---White Screen of Death AND MORE!

Hello,
So I've got the white screen of death on my later 2011 MBP. I've been reading all the other forums and the other discussions for the last 3 weeks and I know what I have to do to get it to at least boot up, but it will not work. I tried all the reset ram options, I tried booting my computer in recovery mode but it wont go in any modes. I connected it to another MBP in target mode and repaired the disk after the verification failed and it still didnt boot up or let me go into any recovery modes. I did the target mode again and ran the repair and verify another two times. I then erased everything on my hard drive while in target mode using the disk utility erase function and now this is where I am...stuck! I don't know if that was the right thing to do it was probably in haste but I am stuck and need some help. Pleaseeeeee!

Thank you for your replies...
jmrmb80 - Yes the device is still recognized by the Desktop Manager. I reloaded the OS on it this morning and the App Loader says it was successful - but on reboot the white screen loads and thats it.
billrobinson - I haven't dropped the phone since I bought it. I wish I had b/c then I could blame it on something. My friends drop their phones all the time, spill stuff on them etc.... and I do nothing - and my phone blows up

Help needed-white screen of death while attempting to migrated files from imac to macbook

Using the migration program on my macbook (about a month old), I rebooted my imac (about a year old) while pressing down the 't' key. Instead of rebooting and bringing up the firewire symbol, I got the white screen of death. Thankfully, I have gotten the imac working again (except I can't get it to recognize my wireless mouse)…but am afraid to try the migration app again for fear of having the same problem and doing irreperable damage......any suggestions for what went wrong the first time and what I should do differently? Also, any ideas on how to get it to recongize my mouse? It has recongized my keyboard with no issue.

Download at www.memtestosx.org
Power on your MBP while holding down the Command and S keys to force Mac OS X to boot into Single User Mode. Once you see a black screen with white text, you can release the key combination. After all the system logging is done scrolling past, type 'memtest all 2' (without the quotes) to test all memory two times. Two passes should be enough to detect any blatant problems, but I wouldn’t hesitate to let it run for hours on end if I suspected an intermittent memory problem (memtest all). When complete, you should be greeted with “All tests passed” if your RAM is in good condition. If your system locks up or freezes indefinitely during the test, you may have a bad memory module on your hands.
(above taken from www.command-tab.com)

I have the so called white screen of death. I am able to get into OS X Utility. I have verified disk and disk is ok. I am trying to reinstall Maverick, but i don't have enough space. Dilemma is i cannot get onto my computer to delete data for more space.

I have the white screen of death, but am able to get into OS X utilitites. I have verifed disk and it's ok. I am trying to reinstall mavericks, but i don't have enough disk space. Dilemma is i can't get onto computer to delete files to create space.
Any suggestions?

Upgrade iPhoto:
Go to the App Store and check out the Purchases List. If iPhoto is there then it will be v9.6.1
If it is there, then drag your existing iPhoto app (not the library, just the app) to the trash
Install the App from the App Store.
Sometimes iPhoto is not visible on the Purchases List. it may be hidden. See this article for details on how to unhide it.
http://support.apple.com/kb/HT4928
One question often asked: Will I lose my Photos if I reinstall?
iPhoto the application and the iPhoto Library are two different parts of the iPhoto programme. So, reinstalling the app should not affect the Library. BUT you should always have a back up before doing this kind of work. Always.

IPod Nano white screen of death - RESURRECTED! :D

Alright, here's the deal...A friend of mine has a new iPod Nano and gave it to me because it had stopped working, and was hoping it was worth something to recover. Sorry about the long story!
It _wouldn't_ turn on. But, when connecting it to the computer via the USB dock cable, it comes on for a few seconds on a grey-whitish screen. Then turns back off, reboots, and tries again. Step 1 step 2. Nothing.
Although, 'Diagnostics mode' or whatnot it is, does work however. It would still be a faint grey screen, but whiter and more vibrant, as if it's saying "Hey, I'm alive! I'm alive!!!" and I can go through settings and make it (sometimes) change colors, and reboot the iPod.
I was thinking since iTunes never recognized it (It was plugged in the whole time) that I would drown in just for the sake of it.
Well, 3 hours later after attempting to kill the poor thing, it... resurrected itself.
I'm serious, it really seems to have unbelievably done it. When turning it on, I get 2 beeps, but no restart loop, the LCD stays on the white screen though, BUT, here's the good thing.
NOW, I hear the system 'click' sounds when using the buttons and such that it's going through the menu, good news so far! It seems like it because after the 'boot' sequence (it appears to boot very fast, strangely).
The good thing is (kinda) https://discussions.apple.com/thread/1517571?start=0&tstart=0 ... So I suspect that somehow, this method of submerging it under water, letting it dry, blowdrying it, and then leaving it in the heat, somehow restored the SD chip inside of it... possibly only for now... I'm going to use this moment to hopefully get all data off the device, and see for one last time if it's fully restorable...
I have the power! Ok, so I hooked it up to the wall charger (just put the wall connector on the USB cord) and it now beeps two times, and after about 30 seconds or so, I get to the main menu, screen still white, but I can certainly hear the click letting me know I'm 'navigating' the iPod. It doesn't appear to have any music on it, or maybe it does, but I need to connect some earphones first. Or, it supposed to be display the 'sad iPod' icon, but I just don't see it, therefor, I'm blind as to the status of it.
I likely guess it's the battery, since every time I disconnect it, it goes dead. Yep, just looked back, still on. Yep, still menu clicking. Yep, I can start it with no problems now. Any clue what I can try to do to resolve this? Obviously it's turning on, and it seems to be doing something, it boots, (apparently) so that's a good sign.
Please, is there any hope at all in this iPod? At all?
AND, IT JUST BEEPED 2 TIMES AGAIN! And I was just typing... why did it do this? (Funny thing is, how it still works!) Is that really the menu button clicking? That would explain it, I mean it only plays the menu clicking sound AFTER about 30 seconds of it 'booting' to the iPod firmware, so it obviously has some sort of life to it. If I hook up my earphones... Holy Mac! I hear music! It's alive!!! It's alive!!! Oh my man!!! Yes!
It has hope, in a way!
Atleast, I hope, but it works! Freaking amazing! Jamming to some awesome beats right now, some cool hip hop, sound quality you ask? Great, actually! I don't know how, don't want to know, but it seems trying to kill this iPod actually resulted in it being resurrected? How? Who knows! This is awesome! iPod truly CAN have 2 lives, I guess!
Cool stuff, I swear on that! My favorite song was on here too!
How to adjust the volume on the iPod Nano? I don't care, it's playing at full volume, and it's awesome!
The sad thing is, it still has the white screen of death, and the battery is apparently fried still (or needs a good 24-hour charging).
This iPod has been sitting dead as a dud in the storage room for a good 1 year or so, unused. And now it came back to life in a flash. Unbelievable.
I love you Apple.

Your problem was moisture. It was wet inside and sitting around for a year let it all dry up.
If you get this kind of thing happening, speed the process up by putting the iPod into a zip lock baggie with a dessicant (you know those little silica pouches) or even some rice to absorb the moisture. Let it sit for a few days and it should dry it all out.
i

White Screen of Death and Wipe Did Not Work

Hello -
I purchased my Blackberry 8900 a year ago and TMobile is my carrier.
I experienced a white screen of death on my Blackberry 8900 last nite while talking on it. It just dropped the call and the screen went white. I shut it off then back on, white screen appeared after reboot. I pulled the battery and left it out for 15 min, inserted it again and rebooted - still white.
I searched online and found a lot of info. My phone is recognized by the Desktop Manager software. I was able to back up all of my data and applications. I deleted all of the data on my phone through the DM as well (or thought I did - I can't tell if it worked or not). I downloaded the current version of the OS from TMobile for reinstallation.
I downloaded JL Cmder to fully wipe the phone. JL Cmder did not work on my home machine (Win 7) but I finally got it to work on my work machine (Vista) today.
I selected the wipe option (4) and JL Cmder successfully connected with the phone. The phone rebooted and I got happy, but on phone reboot I did NOT get the "507" error all of the how-to sites say I'm supposed to get. The phone rebooted with the same white screen and no error message. I've run the wipe command from JL Cmder a few times on the phone and it connects, reboots but I still get the white screen with no error message.
Is there anything else I need to do to get this 507 error? Or is my phone really dead?
I want to do what I can before I shell out more $$ for another phone.
Thanks in advance.

Thank you for your replies...
jmrmb80 - Yes the device is still recognized by the Desktop Manager. I reloaded the OS on it this morning and the App Loader says it was successful - but on reboot the white screen loads and thats it.
billrobinson - I haven't dropped the phone since I bought it. I wish I had b/c then I could blame it on something. My friends drop their phones all the time, spill stuff on them etc.... and I do nothing - and my phone blows up

White Screen of Death - NOTHING IS WORKING

Right, I've had my blackberry for a few months now, it was bought from someone else. Only recently, my phone has been turning itself off and giving me the "white screen of death" but I've always managed to get passed it by removing the battery then restarting it.
But today, it has turned itself off, reloaded to the main screen where it then freezes, the screen goes white and it says "app error 523 - reset". Ive clicked reset about a billion times and it keeps doing the same thing over and over again.
Ive been searching on this site all day for an answer but nothing has worked. I downloaded blackberry desktop/device software but it won't find my device. I tried that app wizard loader thing, but that didn't work either.
And yes, my phone is charged.
I am beyond frustrated now, it's seriously p*ssing me off and I need some help!! I can't fill out one of those information things including the carrier, question and whatever else because I don't know any of mine!
Please help me, I am just getting more and more angry!!

Hey jessmayx3,
Welcome to the BlackBerry Support Community Forums.
I can definitely help you out.
Follow the steps in this article to resolve the App Error 523: www.blackberry.com/btsc/KB24395
Let me know if you have any more questions.
-ViciousFerret
Come follow your BlackBerry Technical Team on Twitter! @BlackBerryHelp
Be sure to click Like! for those who have helped you.
Click Accept as Solution for posts that have solved your issue(s)!

White Screen of Death at Startup - Boot Camp Based Problem

I recently received my Intel-based 20" iMac yesterday and this morning I set it up and transfered all of my files from my old Windows XP computer successfully. I then played around with the iLife suite and a few other programs and decided I should probably run Boot Camp and set up Windows for a few Windows-based programs I need and some games that are Windows only.
I started to look up Boot Camp on the Apple website, then realized iMacs that came with Leapord pre-installed should already have Boot Camp on them. I searched in Spotlight for "Boot camp" and found the "Boot Camp Assistant." I thought that was close enough, so I started the application up.
First, it told me I needed to partition my hard drive and create a space for Windows. I figured I would have only a few esential programs on it, so I opted for a partion of about 10-12 GB if I remember correctly. The installer then told me to insert my Windows disc and I then put in my Windows XP SP1 installation CD. It read it, shutdown, then booted back up into what I recognized as the Windows setup screen.
It went through the normal setup steps, until it got to a point where it asked what partition I should install Windows on. There was only one partition listed, so obviously I chose that one, but what was weird was the partition said it was over 100,000 MB, which is not the 10 GB I told it to partition. I got scared when it told me it would have to format the partition since it wasn't suitable for a Windows installation yet. I figured it wouldn't hurt to recheck the amount I partitioned, so I quit out of the Windows installer.
Next, my Mac restarted and went to the infamous white screen of death.
I have tried basically every single way to fix this.
I tried:
Alt - Option - PR (Reset the PRam) And waited for both 2, 3, 4, and 5 dings
Alt
Option
Shift (Safe Mode)
Put in the Mac OS X disc and booted up holding:
D
C
None of these worked. Sorry if my key abbreviations are off, by the way, because I'm writing this on a Windows laptop and I haven't gotten the keys down for Macs yet.
Does anyone have any suggestions? Apple call support is curretly closed, at least in my timezone. I'll probably try calling them tomorrow, but mostly I'm afraid of having to get a whole new harddrive and/or iMac. I haven't backed up my data anywhere yet (this is just my first day with the Mac) so if I lose the data, there goes upwards of a few thousand dollars in music and other data expenses.
Thanks in advance for ideas, I'll try anything you throw at me now, as long it doesn't void the warranty or involve formatting my hard drive. (Though if you know a way to format my hard drive AND save my data, that would be even better)

All the data that you transfered to the iMac should still be on the PC which originally contained the content. Transferring to the Mac is in reality only copying.
A Boot Camp Windows installation requires Windows SP2 only;
To use Boot Camp, you need:
1. An Intel-based Macintosh computer with a built-in or USB keyboard and a built-in trackpad or USB mouse.
2. Mac OS X 10.5 or later
3. The latest firmware updates available for your Intel-based Mac.
4. At least 10 GB of free space on your startup disk (single partition).
5. A full, single-disc version of Windows Vista, Windows XP Home Edition or Professional with Service Pack 2 or later. Boot Camp does not include Windows. You must provide your own properly licensed installation disc.
  Important: A Windows XP installation disc must include Service Pack 2 (SP2). You cannot install an earlier version of Windows and upgrade to Windows XP, nor install an earlier version of Windows XP and update it to SP2. 
6. Boot Camp Assistant (find it installed in /Applications/Utilities/ on Leopard).
Just an idea for you. There is an entire Apple Discussion forum dedicated to Boot Camp and Windows.
Whereas, not everyone here with an Intel iMac has installed, tried to install or has experience with BC & Windows, everyone there has or at least has an interest. You may attract help more quickly there.
The Forums are at the bottom of the main Apple Discussions page under Windows Compatible Technology. Here is a link;
Boot Camp: Installation and Storage

N97 White screen of death (WSOD) with FW V11.0.21

I have my nokia N97 almost a week now. This morning opera mini froze and I couldn't turn it off so I removed the battery. After reinserting the battery and turned the phone on I got the White screen of death (WSOD), just a white screen with the word nokia on it. I tried to boot it without the simcard and also waiting 30+ minutes before reinserting the battery. But I still have de WSOD...
Do I have to keep it on to drain the battery or are there other methods to fix this problem. I don't feel like sending it to Nokia because I have to wait more than 2 weeks before it's fixed...
The past 2 weeks I have used it intensively, installed a lot of apps. Put 300+ songs on it and and some movies. I had the email widget on the home screen, I heard that's one of the problem on other forums...
Any ideas how I can boot up normally....
Solved!
Go to Solution.

WSOD
Hard Reset
The combination is:
Shift + Space bar + Backspace + Power your phone
Instructions to bypass WSOD:
All you need is: Methodology 1 as posted by some other user
N97
Charger
Follow these steps:
Turn off your phone.
Insert charger.
Remove charger right after screen lights up.
Wait a couple of seconds till screen turns off and just after that press power button.
After standart vibration notification just put your charger in.
VOILA! You can insert your PIN again!
I am using this method for almost a month and it seems that this is only one way to boot up my N97.
It would be nice to hear if this method works for you
Anyway, I have found a solution, that works for me everytime the WSOD comes up. It goes like this when WSOD keeps coming up:
Instructions to bypass WSOD:
All you need is: Methodology 1 as posted by some other user
1. Pull battery and re-insert it.
2. Power up the phone by holding the "Power button + RED key + GREEN key + Camera key" and wait 30 seconds or so.
3. After the wait the phone should come up normally asking for the SIM passcode and everything is fine.
"Power button + RED key + GREEN key + Camera key" is a sort of "soft reset", it keeps all the installations and everything as opposed to the "hard reset".
Hope this helps, and let's all hope that Nokia QA start testing their smartphone software with a little more care. I cannot imagine that normal people would live with such blatant bugs.
My solution to yesterday experience
What I have done:
1. Switch Off Nokia N97 by pulling out the battery
2. Pull out the SIM CARD and Memory Card
3. Switch on The Nokia N97 without SIM AND MEMORY CARD
4. Then do the Factory Settings by going to phone menu options because by this time WSOD will be over.
5. Then Insert the SIM and restart it.
6. Again Switch Off the same and insert Memory Card.
7. Switch on again and restore settings as backedup whether in your PC or memory card to get last settings.

White Screen of Death Questions [PLEASE HELP!]

If someone actually cares about my issue, they will read all of the following. Let's see how many of you are out here and how many just want to answer simple short questions for reputation.
Okay, so I've ran into my first ever iPod Touch issue. I've never owned an iPhone, but I have had an iPod in the past and know a bit about them. I'm going to be 100% honest and I need a serious answer because I'm upset and angry. If anyone can be bothered to read the following, THANK YOU. If anyone could help me out in any way by giving me suggestions/tips and/or a solution, THANK YOU. But anything that can help is appreciated.
I had my board shorts on when this ocurred. I went to the toilet, doing my own business. I had my iPod Touch in my bank pocket which went to about half way down my thigh. The iPod Touch at the time was facing away from my thigh. Pulling down my pants, the iPod Touch hit the tiled floor. It hardly even hit the floor, all I heard was a little click and I realised it was my iPod. It was flat at the time, I picked it up and pressed the Home button immediately to ensure it was okay. It sort of lit up like a white background, but had a very low opacity. Since it was flat, I assumed it was normal.
Putting my iPod on charge right after my toilet break, I waited and waited for it to charge quickly enough for me to see the screen as I was a little worried not having seen that faded screen before. When the Apple logo was to appear, it gave me a lit up white screen. I was so confused as there were no marks AT ALL on my screen or any other part of the iPod.
NOTE: My iPod is still under warranty.
Did my research and came to the conclusion that it was the infamous 'White Screen of Death'. Where do I go from here? I have no clue!
I have important information such as a To Do list and my Contacts within the iPod. I NEED to retrieve this information. Is there any way I can do this?
I can still use the iPod, as if the screen were showing. Sounds are working, but there is just a blank, lit up white screen. Sometimes when I hold the Home button, On/Off button & the Volume Up buttoon all at the same time for ~10-20 seconds, the Apple logo comes up as if the screen was all fixed. 5 Seconds later, it goes all funny as if there were faded white lines and a faded white background but still being able to see the logo/screen. When the iPod loads, it just goes back to the lit up white screen.
Here's another odd thing to this, when I leave my iPod Touch sitting in a spot remotely, without touching it for a few hours, when I come back to it and hit the Home button, the iPod will begin to work fine as if nothing ever happened. No white screen, no nothing, just simply use it as I wish. I can even sometimes lock it, and then unclock it again with it still showing perfectly. However, when I tend to click the On/Off button after this happens, or if I just continue to use it for ~1 minute, it will eventually do the same as the above paragraph in second last sentence.
This may be important:
The iPod charges fine.
The iPod can be used with my computer and iTunes fine.
To sum it all up, everything can be done, including using the iPod, but with a lit up white screen.
Here are some questions I have for you guys:
Will Apple cover this in my warranty?
If they won't, what should I do?
How much would a replacement screen cost?
Should I attempty to open my iPod if they do not cover it by warranty? (I have not attempted as I don't want to void anything).
What could be the cause and why?
How can I retrieve that important information? (Contacts & To Do List)
Have you got any suggestions/tips for me?
I need this resolved guys. I'm very upset and angry over the whole situation. If a little thump on the tiles like that (it's not like I dropped it or anything) can damage the screen that much, then this devices from Apple can't be very reliable. All I'm asking for is some genuine service/help to resolve my issue. If this can be done, I will be one VERY happy person.
Daniel

Will Apple cover this in my warranty?
As stated above it is not covered by the warranty as it will be deemed accidental damage. You can try explaining what happened to somebody at the Genius Bar and they may cut you some slack and replace it at no cost. They might not though as Apple has started to really come down hard on eliminating replacing accidentally damaged iPods at no cost.
If they won't, what should I do?
Again, bring it into them anyways and explain what happened. You have nothing to lose either way. Otherwise, you really only have 2 other options. Send it to a third party service center to have them take a look at it and possibly repair the iPod, or do some studying online and learn how to open up the device yourself and take a look. There are some excellent step-by-step repair guides at http://www.ifixit.com/.
How much would a replacement screen cost?
This depends on where or how you have it repaired. Here is Apple's repair pricing guide.
http://www.apple.com/support/ipod/service/prices/
Third party repair centers will cost less and they'll actually swap out the bad part rather than just replace the entire iPod as Apple does.
Should I attempty to open my iPod if they do not cover it by warranty? (I have not attempted as I don't want to void anything).
If you have a warranty on it still, I wouldn't quite yet. Take it to your local Apple store as explained above. Otherwise, I would only if you feel comfortable working with small electronics and consider yourself handy with them.
What could be the cause and why?
As stated already, it could be a damaged or loose LCD ribbon cable or the LCD screen itself is damaged. As to what exact component, there is no way to tell.
How can I retrieve that important information? (Contacts & To Do List)
Make a backup of the device in iTunes before taking or sending it in for service or before you decide to open it up (if you do happen to go that route). See here what is included in the backup of the device.
iTunes: About iOS backups
If you get a new or replacement device you can restore it from that backup.
Have you got any suggestions/tips for me?
As I have already stated numerous times, try taking it into your local Apple Store and see if there is anything can do for you such as swap it out. Remember that they are not obligated to do so since the damage is technically accidental. Be kind and polite when explaning what happened. You never know what could happen!
B-rock

My iPod touch 4th gen has the white screen of death and won't connect to iTunes to restore.

I was updating from iOS 6 beta 1 to beta 2 when my ipod froze up and started showing the white screen of death. I've tried the trick where you hold the power and home button for ten seconds and tried to put it in DFU mode to restore. None of these tricks work and my screen is still white. Also I plug it into my Windows Vista computer with iTunes 10.6.3 but it wont show up. I really need help. I don't have warranty or money to buy a new one. My grandmother will heartbroken if $200 goes down the drain.

Im not developer and I have ios 6 click this link http://www.youtube.com/watch?v=kHvf6Wty0nk&feature=plcp but anyway try putting it into dfu

White screen of death with little black clock thing

I've had the so called white screen of death for 2 days. Phone was locked in pocket. Took it out and there was a tiny error message on the screen. unfortunately I can't tell you what message it was :-(
Removed battery for long and short periods. Each time, when put bavck in, the led light flicks on and i get the white screen (without me powering it up). The phone is totally unresponsive.
I've tried the following but the computer recognises my phone (instead of 'unknown'), then I get the message "The Blackberry Desktop Software does not have Blackberry Device Software for the device that you have connected to the computer. Contact your wireless service provider or system administrator".
Done the downloads then nothing apart from the phone turning itself off. HURRAH! However, it's back to square one because if I touch it, we go back to the beginning.
1) Make sure you have Blackberry Desktop Manager installed.
http://na.blackberry.com/eng/services/desktop/
2) On your PC, go to Start > Run and copy and paste the following line exactly (meaning with the quotation marks):
"c:\program files\common files\research in motion\apploader\loader.exe" /nojvm
3) The Application Loader Wizard will appear -- click "Next."
4) In the "Connection:" drop-down menu, you should see "USB-PIN: UNKNOWN". Click the "Next" button.
5) You should then see a list of applications ready to be installed for your Blackberry. Hit Next and Finish and you are well on your way to getting your Blackberry back to life. Congrats! Just don't disconnect anything and let the lengthy process finish completely.
NOTE: If you do not see a list of applications mentioned in step 5 and instead see the message "The Blackberry Desktop Software does not have Blackberry Device Software for the device that you have connected to the computer. Contact your wireless service provider or system administrator," then you must download Blackberry's Operating System for your carrier and device.
http://www.blackberryfaq.com/index.php/BlackBerry_Operating_System_Downloads
Just select the appropriate carrier and network type, select your Blackberry model from the list and download the latest version. Install this download and follow the above steps again and you should be on the right path.
I've tried all of this on the old, slow laptop but have a mac as well.
PLEASE someone HELP!

Suzi-Q wrote:. Seriously fed up about not being able to back up on a mac
Hi you can use the mac
http://us.blackberry.com/apps-software/desktop/desktop_mac.jsp
However, if you haven't already done a backup, it is most certainly too late, but its worth a long-shot.
From your original post, it seems to me you did most things except a complete wipe without which I think you may be stuck with the white screen. Whether you use JL_CMDER or BBSAK to perform this vital step, they need a Windows OS. Whilst I do not have any mac knowledge, I do know that you can run Windows 7 on the mac. However, sounds like a faff to me. Can you not borrow a friends PC?
Below are the wipe and reinstall instructions which includes using JL_CMDER
This what I did to completely wipe my BB. I wrote this before starting and printed it off.
If your device is functioning, perform a backup now if you haven't already done so saving the file to a place and in a name that you can easily locate on computer.
I then uninstalled DTM and then deleted all other references to BB/Rim in Windows Explorer thus removing the OS for the BB from the computer in order to ensure that the version I would reinstall would be a brand new downloaded version.
Get the latest Desk Top Software (DTS)
http://us.blackberry.com/apps-software/desktop/?CPID=OTC-DSKTPSW&cp=OTC-DSKTPSW
and install it on the computer.
Get the correct latest version of the OS
http://us.blackberry.com/support/downloads/download_sites.jsp
and save it to computer.
To erase all the data on your BlackBerry device, complete the following steps.
1) Download JL_Cmder from http://www.4shared.com/get/oqP9V-2Q/JL_Cmder_v19.html
2) Install JL_Cmder to computer.
3) Double check you have already backed-up the BB. If you DO NOT, you will lose ALL data.
4) Make sure the DTS is closed and plug in the BB to computer via USB
5) Go to the JL_Cmder on your computer and double click it to start. Now,this may take a few tries to connect, so keep trying until it does.
6) On the first screen, Press any key to continue.
7) Now, if your device uses a password, enter it now. If not, press "N"
8) Press 4 to initiate the WIPE
9) Press "Y" to continue
10) Now type "blackberry" to continue
11) On the BB you will see a white screen with a'507' Error. Don't worry, this is what you want! You are now ready to install the OS.
Launch the new Desk Top Software on the computer
1). On the home screen of the BlackBerry® Desktop Software, click Device > Update my device.
2). Click View Other Versions. Click the version of the new OS you previously downloaded.
3). Click Install. The DTM will install the OS and then provide you with a list of applications to install. If you have had difficulties with an app, do not install it.
Do not disconnect the device until the whole process is completed and the device has rebooted.
After 10 minutes reboot again by removing the battery whilst powered-on and leave it out for a couple of minutes.
Leave it again for 10 minutes. You should now have a fully functioning BB!
Blackberry Best Advice - Back-up weekly
If I have helped you please check the "Kudos" star on the right >>>>

HELP!!!!!! (White Screen of Death)

Ok i was downloading a new adobe flash update for mac and when i went to install it asked me to close out of any browsers.... so i did.... then it starts running slow and freezes up which is just what computers love to do....
not so much with macs tho... anyway i shut off my macbook and restart it and i get the white screen of death.... what gives?? i tried everything to fix it... loaded the utility disc, command-option-r-p, took the battery out held the power button.... i mean everything... im ****** right now.... from what i have read about this white screen crap is i have lost all my data and files!
if there is anything else i can do please tell me? the reason i got a macbook as a laptop was to not deal with daily PC issues like software crap and viruses and such things.... but now i have a hardware problem and im not happy.... its only been a few months since i got the macbook not even thru my 2nd semester at college.... anyway i need a solution and fast and there are no apple retail stores here in tallahassee florida please help

It your hard drive have it replaced by apple I just got mine back. Same thing and yes what your seeing is the apple screen of death. I hope you have all of you info backed up.

White Screen of Death. Need a more in-depth help.

Similar Messages

Maybe you are looking for