White Screen of Death (or coma, at least)

Hi everyone,
I've been searching all over the place for a couple of days and no solution to the following situation has worked as of yet, so any help would be greatly appreciated.
Brand new installation of Snow Leopard on a late 2006 24" white iMac with 4GB of upgraded memory. Everything is running smoothly (as has been previously under Tiger and Leopard before). I went on to try and give Boot Camp a go, so I create a (recommended) 32GB partition with the assistant and reboot. Windows XP starts the installer but it goes on to tell me that it's going to install on a 13XGB partition. I get cold feet and quit from the installer. Big mistake, it seems.
The iMac reboots, chimes and that's about it. No Apple logo, no Mac OS X, no Windows XP installer. Just a plain white screen. Now, I've read about similar situations in other posts, but nothing I've read has worked so far:
-> I've tried every possible start-up keys to force all possible boot modes, as per the documentation (single user mode, verbose, safe mode, etc.)
-> I've tried Target Disk Mode with no luck
-> It doesn't boot from any OS DVD I have (the original DVDs, Leopard or Snow Leopard).
Pressing "alt" on boot will give me a cursor but no drives, not even the DVDs. Pressing "c" or "d" will make the DVD spin for a while, but nothing more. I can put my MBP on TDM and it will show up on the boot screen when pressing "alt", but to little use. I've also done all this removing the upgraded RAM and restoring the original with the same results.
If I just let it boot without pressing anything, it'll turn off just by pressing the power button; otherwise (using some start-up keys) I'll have to press it some seconds to turn it off.
Now, if I could just get to Disk Utility or even the console, I'd be a happy man.
I'm now going to try to make a bootable firewire drive with the original DVDs or any OS version that's willing to be installed on an external drive, and give that another go, with low expectations. I can't think of anything else (except from opening it and getting the hard drive, which looks way more complicated that on the G5s).
Again, any help or pointer would be very much appreciated.
Thanks in advance,
Rafa

Ok, thanks to these two wonderful posts I got it to work:
http://discussions.apple.com/thread.jspa?messageID=5905884&#5905884
http://discussions.apple.com/thread.jspa?threadID=1143433&start=0&tstart=0
In essence: Get a working Mac and an external Firewire drive, boot a Leopard (for example) Installation DVD and install it on the External Drive (GUID Partition + HFS+). Attach it to the dead Mac and -here's the real trick- *turn on the dead Mac and keep pushing the power button until the led light flashes and it reboots*. That will make it use the external drive. The standard "alt" start-up will not work.
From there on you can use Disk Utility to recover your Mac.

Similar Messages

IPhone white screen of death wont come of with home solutions

Hom and sleep button
Resetting
Updating
Wont work. Any Other alternatives¿

JFJ_595 wrote:
the start-up music still plays.
The POST for the hardware checks out then.
JFJ_595 wrote:
I turn on my computer and all i get is a blank white/grey screen. No logo, no loading symbol, just a blank screen;
Command+R does nothing,
Holding Shift does nothing
Press and hold the power button down to turn of the machine.
Press and hold the Command Option R keys on the built in keyboard and press the power button, you have to be near your high speed Internet connection.
If you get something like "Install OS X" do that, it will overwrite your old copy with a new one and not touch your files or most programs.
If you can't install OS X, head to Disk Utility and First Aid > Repair Disk and Permissions and try reisntalling OS X again. (do not erase the drive as this will wipe your data off, unless your sure)
If you still get the white/gray screen with nothing while holding the Command Option R keys at boot time, I suspect your EFI firmware has been borked somehow and it's not loading to respond to the at boot key commands.
We are able to reinstall the EFI firmware ourselves, but the current method requires a machine with a internal optical drive. This problem occurs so rarely that it's not been used much and certainly unknown how well it works off a USB thumb drive, which is what I suspect the Apple Store/Repair will do.
Since your under warranty, I would have Apple replace the EFI firmware and check the machine out for hardware issues as well.
Buy AppleCare and a external drive for TimeMachine backups.

My ipod touch 4th gen. is stuck on white screen of death.

I recentally had dropped my ipod touch and when i picked it up it was stuck on the white screen of death. I tried to hard restart by holding down the power and home button at the same time, but the screen would only turn off then come right back on. Then i let the power drain. After it would no longer turn on i put it on the charger to find that the white screen would pop right back up. I didnt want to restore it but because its my only option i put it on my compute but itunes couldnt acess it because i had a passcode on it. is there a differnt way to restore it or fix it? HELLLPPP MEEEE!

Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar

White Screen of Death Questions [PLEASE HELP!]

If someone actually cares about my issue, they will read all of the following. Let's see how many of you are out here and how many just want to answer simple short questions for reputation.
Okay, so I've ran into my first ever iPod Touch issue. I've never owned an iPhone, but I have had an iPod in the past and know a bit about them. I'm going to be 100% honest and I need a serious answer because I'm upset and angry. If anyone can be bothered to read the following, THANK YOU. If anyone could help me out in any way by giving me suggestions/tips and/or a solution, THANK YOU. But anything that can help is appreciated.
I had my board shorts on when this ocurred. I went to the toilet, doing my own business. I had my iPod Touch in my bank pocket which went to about half way down my thigh. The iPod Touch at the time was facing away from my thigh. Pulling down my pants, the iPod Touch hit the tiled floor. It hardly even hit the floor, all I heard was a little click and I realised it was my iPod. It was flat at the time, I picked it up and pressed the Home button immediately to ensure it was okay. It sort of lit up like a white background, but had a very low opacity. Since it was flat, I assumed it was normal.
Putting my iPod on charge right after my toilet break, I waited and waited for it to charge quickly enough for me to see the screen as I was a little worried not having seen that faded screen before. When the Apple logo was to appear, it gave me a lit up white screen. I was so confused as there were no marks AT ALL on my screen or any other part of the iPod.
NOTE: My iPod is still under warranty.
Did my research and came to the conclusion that it was the infamous 'White Screen of Death'. Where do I go from here? I have no clue!
I have important information such as a To Do list and my Contacts within the iPod. I NEED to retrieve this information. Is there any way I can do this?
I can still use the iPod, as if the screen were showing. Sounds are working, but there is just a blank, lit up white screen. Sometimes when I hold the Home button, On/Off button & the Volume Up buttoon all at the same time for ~10-20 seconds, the Apple logo comes up as if the screen was all fixed. 5 Seconds later, it goes all funny as if there were faded white lines and a faded white background but still being able to see the logo/screen. When the iPod loads, it just goes back to the lit up white screen.
Here's another odd thing to this, when I leave my iPod Touch sitting in a spot remotely, without touching it for a few hours, when I come back to it and hit the Home button, the iPod will begin to work fine as if nothing ever happened. No white screen, no nothing, just simply use it as I wish. I can even sometimes lock it, and then unclock it again with it still showing perfectly. However, when I tend to click the On/Off button after this happens, or if I just continue to use it for ~1 minute, it will eventually do the same as the above paragraph in second last sentence.
This may be important:
The iPod charges fine.
The iPod can be used with my computer and iTunes fine.
To sum it all up, everything can be done, including using the iPod, but with a lit up white screen.
Here are some questions I have for you guys:
Will Apple cover this in my warranty?
If they won't, what should I do?
How much would a replacement screen cost?
Should I attempty to open my iPod if they do not cover it by warranty? (I have not attempted as I don't want to void anything).
What could be the cause and why?
How can I retrieve that important information? (Contacts & To Do List)
Have you got any suggestions/tips for me?
I need this resolved guys. I'm very upset and angry over the whole situation. If a little thump on the tiles like that (it's not like I dropped it or anything) can damage the screen that much, then this devices from Apple can't be very reliable. All I'm asking for is some genuine service/help to resolve my issue. If this can be done, I will be one VERY happy person.
Daniel

Will Apple cover this in my warranty?
As stated above it is not covered by the warranty as it will be deemed accidental damage. You can try explaining what happened to somebody at the Genius Bar and they may cut you some slack and replace it at no cost. They might not though as Apple has started to really come down hard on eliminating replacing accidentally damaged iPods at no cost.
If they won't, what should I do?
Again, bring it into them anyways and explain what happened. You have nothing to lose either way. Otherwise, you really only have 2 other options. Send it to a third party service center to have them take a look at it and possibly repair the iPod, or do some studying online and learn how to open up the device yourself and take a look. There are some excellent step-by-step repair guides at http://www.ifixit.com/.
How much would a replacement screen cost?
This depends on where or how you have it repaired. Here is Apple's repair pricing guide.
http://www.apple.com/support/ipod/service/prices/
Third party repair centers will cost less and they'll actually swap out the bad part rather than just replace the entire iPod as Apple does.
Should I attempty to open my iPod if they do not cover it by warranty? (I have not attempted as I don't want to void anything).
If you have a warranty on it still, I wouldn't quite yet. Take it to your local Apple store as explained above. Otherwise, I would only if you feel comfortable working with small electronics and consider yourself handy with them.
What could be the cause and why?
As stated already, it could be a damaged or loose LCD ribbon cable or the LCD screen itself is damaged. As to what exact component, there is no way to tell.
How can I retrieve that important information? (Contacts & To Do List)
Make a backup of the device in iTunes before taking or sending it in for service or before you decide to open it up (if you do happen to go that route). See here what is included in the backup of the device.
iTunes: About iOS backups
If you get a new or replacement device you can restore it from that backup.
Have you got any suggestions/tips for me?
As I have already stated numerous times, try taking it into your local Apple Store and see if there is anything can do for you such as swap it out. Remember that they are not obligated to do so since the damage is technically accidental. Be kind and polite when explaning what happened. You never know what could happen!
B-rock

White screen of death from game. And a new game not working at all

My iPod touch 4th gen has been getting the white screen of death when I try to play plants vs zombies why does this keep happening and is there a way to stop it from happening again?
And I recently installed fruit ninja and it won`t work at all it opens but it just says loading and then it crashes and I've tried running it in safe mode and it still dies the same thing what can I do to get the game to work?

- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar

My iPod touch 4th gen has the white screen of death and won't connect to iTunes to restore.

I was updating from iOS 6 beta 1 to beta 2 when my ipod froze up and started showing the white screen of death. I've tried the trick where you hold the power and home button for ten seconds and tried to put it in DFU mode to restore. None of these tricks work and my screen is still white. Also I plug it into my Windows Vista computer with iTunes 10.6.3 but it wont show up. I really need help. I don't have warranty or money to buy a new one. My grandmother will heartbroken if $200 goes down the drain.

Im not developer and I have ios 6 click this link http://www.youtube.com/watch?v=kHvf6Wty0nk&feature=plcp but anyway try putting it into dfu

IPod Nano white screen of death - RESURRECTED! :D

Alright, here's the deal...A friend of mine has a new iPod Nano and gave it to me because it had stopped working, and was hoping it was worth something to recover. Sorry about the long story!
It _wouldn't_ turn on. But, when connecting it to the computer via the USB dock cable, it comes on for a few seconds on a grey-whitish screen. Then turns back off, reboots, and tries again. Step 1 step 2. Nothing.
Although, 'Diagnostics mode' or whatnot it is, does work however. It would still be a faint grey screen, but whiter and more vibrant, as if it's saying "Hey, I'm alive! I'm alive!!!" and I can go through settings and make it (sometimes) change colors, and reboot the iPod.
I was thinking since iTunes never recognized it (It was plugged in the whole time) that I would drown in just for the sake of it.
Well, 3 hours later after attempting to kill the poor thing, it... resurrected itself.
I'm serious, it really seems to have unbelievably done it. When turning it on, I get 2 beeps, but no restart loop, the LCD stays on the white screen though, BUT, here's the good thing.
NOW, I hear the system 'click' sounds when using the buttons and such that it's going through the menu, good news so far! It seems like it because after the 'boot' sequence (it appears to boot very fast, strangely).
The good thing is (kinda) https://discussions.apple.com/thread/1517571?start=0&tstart=0 ... So I suspect that somehow, this method of submerging it under water, letting it dry, blowdrying it, and then leaving it in the heat, somehow restored the SD chip inside of it... possibly only for now... I'm going to use this moment to hopefully get all data off the device, and see for one last time if it's fully restorable...
I have the power! Ok, so I hooked it up to the wall charger (just put the wall connector on the USB cord) and it now beeps two times, and after about 30 seconds or so, I get to the main menu, screen still white, but I can certainly hear the click letting me know I'm 'navigating' the iPod. It doesn't appear to have any music on it, or maybe it does, but I need to connect some earphones first. Or, it supposed to be display the 'sad iPod' icon, but I just don't see it, therefor, I'm blind as to the status of it.
I likely guess it's the battery, since every time I disconnect it, it goes dead. Yep, just looked back, still on. Yep, still menu clicking. Yep, I can start it with no problems now. Any clue what I can try to do to resolve this? Obviously it's turning on, and it seems to be doing something, it boots, (apparently) so that's a good sign.
Please, is there any hope at all in this iPod? At all?
AND, IT JUST BEEPED 2 TIMES AGAIN! And I was just typing... why did it do this? (Funny thing is, how it still works!) Is that really the menu button clicking? That would explain it, I mean it only plays the menu clicking sound AFTER about 30 seconds of it 'booting' to the iPod firmware, so it obviously has some sort of life to it. If I hook up my earphones... Holy Mac! I hear music! It's alive!!! It's alive!!! Oh my man!!! Yes!
It has hope, in a way!
Atleast, I hope, but it works! Freaking amazing! Jamming to some awesome beats right now, some cool hip hop, sound quality you ask? Great, actually! I don't know how, don't want to know, but it seems trying to kill this iPod actually resulted in it being resurrected? How? Who knows! This is awesome! iPod truly CAN have 2 lives, I guess!
Cool stuff, I swear on that! My favorite song was on here too!
How to adjust the volume on the iPod Nano? I don't care, it's playing at full volume, and it's awesome!
The sad thing is, it still has the white screen of death, and the battery is apparently fried still (or needs a good 24-hour charging).
This iPod has been sitting dead as a dud in the storage room for a good 1 year or so, unused. And now it came back to life in a flash. Unbelievable.
I love you Apple.

Your problem was moisture. It was wet inside and sitting around for a year let it all dry up.
If you get this kind of thing happening, speed the process up by putting the iPod into a zip lock baggie with a dessicant (you know those little silica pouches) or even some rice to absorb the moisture. Let it sit for a few days and it should dry it all out.
i

White screen of death with little black clock thing

I've had the so called white screen of death for 2 days. Phone was locked in pocket. Took it out and there was a tiny error message on the screen. unfortunately I can't tell you what message it was :-(
Removed battery for long and short periods. Each time, when put bavck in, the led light flicks on and i get the white screen (without me powering it up). The phone is totally unresponsive.
I've tried the following but the computer recognises my phone (instead of 'unknown'), then I get the message "The Blackberry Desktop Software does not have Blackberry Device Software for the device that you have connected to the computer. Contact your wireless service provider or system administrator".
Done the downloads then nothing apart from the phone turning itself off. HURRAH! However, it's back to square one because if I touch it, we go back to the beginning.
1) Make sure you have Blackberry Desktop Manager installed.
http://na.blackberry.com/eng/services/desktop/
2) On your PC, go to Start > Run and copy and paste the following line exactly (meaning with the quotation marks):
"c:\program files\common files\research in motion\apploader\loader.exe" /nojvm
3) The Application Loader Wizard will appear -- click "Next."
4) In the "Connection:" drop-down menu, you should see "USB-PIN: UNKNOWN". Click the "Next" button.
5) You should then see a list of applications ready to be installed for your Blackberry. Hit Next and Finish and you are well on your way to getting your Blackberry back to life. Congrats! Just don't disconnect anything and let the lengthy process finish completely.
NOTE: If you do not see a list of applications mentioned in step 5 and instead see the message "The Blackberry Desktop Software does not have Blackberry Device Software for the device that you have connected to the computer. Contact your wireless service provider or system administrator," then you must download Blackberry's Operating System for your carrier and device.
http://www.blackberryfaq.com/index.php/BlackBerry_Operating_System_Downloads
Just select the appropriate carrier and network type, select your Blackberry model from the list and download the latest version. Install this download and follow the above steps again and you should be on the right path.
I've tried all of this on the old, slow laptop but have a mac as well.
PLEASE someone HELP!

Suzi-Q wrote:. Seriously fed up about not being able to back up on a mac
Hi you can use the mac
http://us.blackberry.com/apps-software/desktop/desktop_mac.jsp
However, if you haven't already done a backup, it is most certainly too late, but its worth a long-shot.
From your original post, it seems to me you did most things except a complete wipe without which I think you may be stuck with the white screen. Whether you use JL_CMDER or BBSAK to perform this vital step, they need a Windows OS. Whilst I do not have any mac knowledge, I do know that you can run Windows 7 on the mac. However, sounds like a faff to me. Can you not borrow a friends PC?
Below are the wipe and reinstall instructions which includes using JL_CMDER
This what I did to completely wipe my BB. I wrote this before starting and printed it off.
If your device is functioning, perform a backup now if you haven't already done so saving the file to a place and in a name that you can easily locate on computer.
I then uninstalled DTM and then deleted all other references to BB/Rim in Windows Explorer thus removing the OS for the BB from the computer in order to ensure that the version I would reinstall would be a brand new downloaded version.
Get the latest Desk Top Software (DTS)
http://us.blackberry.com/apps-software/desktop/?CPID=OTC-DSKTPSW&cp=OTC-DSKTPSW
and install it on the computer.
Get the correct latest version of the OS
http://us.blackberry.com/support/downloads/download_sites.jsp
and save it to computer.
To erase all the data on your BlackBerry device, complete the following steps.
1) Download JL_Cmder from http://www.4shared.com/get/oqP9V-2Q/JL_Cmder_v19.html
2) Install JL_Cmder to computer.
3) Double check you have already backed-up the BB. If you DO NOT, you will lose ALL data.
4) Make sure the DTS is closed and plug in the BB to computer via USB
5) Go to the JL_Cmder on your computer and double click it to start. Now,this may take a few tries to connect, so keep trying until it does.
6) On the first screen, Press any key to continue.
7) Now, if your device uses a password, enter it now. If not, press "N"
8) Press 4 to initiate the WIPE
9) Press "Y" to continue
10) Now type "blackberry" to continue
11) On the BB you will see a white screen with a'507' Error. Don't worry, this is what you want! You are now ready to install the OS.
Launch the new Desk Top Software on the computer
1). On the home screen of the BlackBerry® Desktop Software, click Device > Update my device.
2). Click View Other Versions. Click the version of the new OS you previously downloaded.
3). Click Install. The DTM will install the OS and then provide you with a list of applications to install. If you have had difficulties with an app, do not install it.
Do not disconnect the device until the whole process is completed and the device has rebooted.
After 10 minutes reboot again by removing the battery whilst powered-on and leave it out for a couple of minutes.
Leave it again for 10 minutes. You should now have a fully functioning BB!
Blackberry Best Advice - Back-up weekly
If I have helped you please check the "Kudos" star on the right >>>>

I have a 13 inch MacBook Pro (2009) & the "White Screen of Death" is present. Need help?

I have a 13 inch MacBook Pro (2009). Recently I bought an extended hard drive because I had used up the memory on my iDisk. As I was running the Time Machine back up on my new extended drive, the battery on my Pro ran out causing it to shut down. Once I hooked up my Pro to the power cord & logged in, the "White Screen of Death" appeared on the home display. Obviously the battery still works, my phone is able to charge along with the extended drive, I am able to adjust the lighting on my keyboard along with adjusting the brightness on my screen, but the "White Screen" remains. I need help in determining the cause of this issue & the steps I'll need to take in order to resolve this. I love my Pro, all my documents, photos & music are on it & the last thing I want to do is kill my wallet by buying a new Pro. So could someone on here please help me? It would be greatly appreciated & I thank you in advance!

Take each of these steps that you haven't already tried. Stop when the problem is resolved.
Step 1
The first step in dealing with a boot failure is to secure your data. If you want to preserve the contents of the startup drive, and you don't already have at least one current backup, you must try to back up now, before you do anything else. It may or may not be possible. If you don't care about the data that has changed since your last backup, you can skip this step.
There are several ways to back up a Mac that is unable to boot. You need an external hard drive to hold the backup data.
a. Boot into the Recovery partition, or from a local Time Machine backup volume (option key at startup.) When the OS X Utilities screen appears, launch Disk Utility and follow the instructions in this support article, under “Instructions for backing up to an external hard disk via Disk Utility.”
b. If you have access to a working Mac, and both it and the non-working Mac have FireWire or Thunderbolt ports, boot the non-working Mac in target disk mode. Use the working Mac to copy the data to another drive. This technique won't work with USB, Ethernet, Wi-Fi, or Bluetooth.
c. If the internal drive of the non-working Mac is user-replaceable, remove it and mount it in an external enclosure or drive dock. Use another Mac to copy the data.
Step 2
Press and hold the power button until the power shuts off. Disconnect all wired peripherals except those needed to boot, and remove all aftermarket expansion cards. Use a different keyboard and/or mouse, if those devices are wired. If you can boot now, one of the devices you disconnected, or a combination of them, is causing the problem. Finding out which one is a process of elimination.
If you've booted from an external storage device, make sure that your internal boot volume is selected in the Startup Disk pane of System Preferences.
Step 3
Boot in safe mode. Note: If FileVault is enabled, or if a firmware password is set, or if the boot volume is a software RAID, you can’t do this. Post for further instructions.
Safe mode is much slower to boot and run than normal, and some things won’t work at all, including wireless networking on certain Macs.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
When you boot in safe mode, it's normal to see a dark gray progress bar on a light gray background. If the progress bar gets stuck for more than a few minutes, or if the system shuts down automatically while the progress bar is displayed, your boot volume is damaged and the drive is probably malfunctioning. In that case, go to step 5.
If you can boot and log in now, empty the Trash, and then open the Finder Info window on your boot volume ("Macintosh HD," unless you gave it a different name.) Check that you have at least 9 GB of available space, as shown in the window. If you don't, copy as many files as necessary to another volume (not another folder on the same volume) and delete the originals. Deletion isn't complete until you empty the Trash again. Do this until the available space is more than 9 GB. Then reboot as usual (i.e., not in safe mode.)
If the boot process hangs again, the problem is likely caused by a third-party system modification that you installed. Post for further instructions.
Step 4
Sometimes a boot failure can be resolved by resetting the NVRAM.
Step 5
Launch Disk Utility in Recovery mode (see Step 1.) Select your startup volume, then run Repair Disk. If any problems are found, repeat until clear. If Disk Utility reports that the volume can't be repaired, the drive has malfunctioned and should be replaced. You might choose to tolerate one such malfunction in the life of the drive. In that case, erase the volume and restore from a backup. If the same thing ever happens again, replace the drive immediately.
This is one of the rare situations in which you should also run Repair Permissions, ignoring the false warnings it may produce. Look for the line "Permissions repair complete" at the end of the output. Then reboot as usual.
Step 6
Reinstall the OS. If your Mac was upgraded from an older version of OS X, you’ll need the Apple ID and password you used to upgrade.
Step 7
Repeat step 6, but this time erase the boot volume in Disk Utility before installing. The system should automatically reboot into the Setup Assistant. Follow the prompts to transfer your data from a Time Machine or other backup.
Step 8
This step applies only to a Mac Pro tower, not to any other model. A dead logic-board battery can cause a gray screen at boot. Typically the boot failure will be preceded by loss of the startup disk and system clock settings. See the user manual for replacement instructions.
Step 9
If you get this far, you're probably dealing with a hardware fault. Make a "Genius" appointment at an Apple Store to have the machine tested.

Satellite A350 - White Screen Of Death

Hi
I recently broke my screen in a temper tantrum and sent it in to Toshiba repair.
They replaced my screen. That was about a month ago.
I installed windows 7 3-4 days ago and it worked fine.
I opened my laptop one night to discover a blank white screen.
After turning it off and on, taking the battery out and in, the white screen still remained, then it randomly appeared with system restore options
I restored the system and applied a microsoft hotfix to counteract the supposed windows 7 error. it did not work.
The white screen appears when i put the laptop to sleep (shut the laptop) or shut it down.
The screen appeared again yesterday and i left it overnight hoping it would change.
My sister pulled out and put back in the battery and a screen appeared asking how you would like to start windows.
I started windows then reinstalled Windows Vista using a mirosoft setup disc.
After installing AVG antivirus it told me to restart.
I restarted the laptop and instead of the toshiba logo appearing the white screen of death appeared.
It stayed for 10-20 seconds then my laptop started.
I looked at this article (http://www.laptoprepair101.com/laptop/2008/04/13/laptop-lcd-screen-turned-white/) and it suggested the screen may have problems. Should i send it back in to Toshiba?
Can someone supply further diagnosis?
My specs:
Intel Core 2 Duo CPU P7450
2.13ghz
4.00GB RAM
32 bit OS
So basically i have a random white screen when i restart, turn on or bring the laptop back from sleeping. whether it recovers is a strange thing with many factors. i don't think its my OS because it happens on Vista and Windows 7
please help as much as you can. i don't wan't to take it in for repair as it may cost money

The screen has a 2 month warranty from the repair and the laptop still has half a year of general warranty. when the white screen appears i tried using HDMI to connect it to a TV and there was no change. Could it be due to the fact i upgraded to Windows 7? if so will they still charge me? is there any test i can do to check if it is a Hardware issue or a screen problem?
i shut the laptop for a while yesterday and my brother opened it to see the white screen. i grabbed the right side of the screen and pushed it back and the logon screen came up. what would that suggest?
thanks for the help

White screen of death ipod 4th gen

I got the white screen of death I have tried reseting/ turning it off but it wont work. i even tried holding the volume button DOES not work. I tried to restore it in my computer but i need to enter a passcode to restore but since i cant see anything i cant I tried back up but i need to enter my passcode once again. I tried DFU mode it wouldnt work. I dropped it a month ago then it turned white but i did the reset thing then it worked fine just had to reset it like 10 times a day now it wont reset anymore. How much will it cost to repair if you are out of warrranty.

Try:
- iOS: Not responding or does not turn on
- Try using this program to place the iPod in recovery mode
RecBoot: Easy Way to Put iPhone into Recovery Mode
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar
What happened when you placed the iPod in DFU mode and then restored?

White Screen Of Death-Did all the key hold downs

Hello,
After the spinning beach ball of death today, the Imac is now in the White screen of death mode. I did power off, command option , p r keys with two chimes. I did the c key hold down. I tried the tech tool deluxe disc. I tried the power off only. I have unplugged and let it sit. Is there any thing else I can do?
Thank You!

Sorry, Kenichi, your post wasn't there a minute ago:(
+did not work+
Assuming you can get the Install Disc into the optical drive - with it already in the optical drive, then you power-up while holding down and continuing to hold down the c key (it's small case, so cap's lock off) until you see a spinning dial on the white screen (at that point you can release the c key) - how far does it get while trying to accomplish this?
Does it do anything at all? Make any noise? Power light on or flashing? Do you ever get to hear the Mac startup "gong" sound? or see the spinning dial?
The following article provides the startup sequence you might witness:
http://support.apple.com/kb/HT2674?viewlocale=en_US
http://support.apple.com/kb/HT2538?viewlocale=en_US
Message was edited by: myhighway

My screen is completely white, i've tried holding lock and home buttons as seen on you tube something called 'white screen of death' its goes black (think it switches off) then back to the white screen need help fast please!

my screen is completely white, i've tried holding lock and home buttons as seen on you tube something called 'white screen of death' its goes black (think it switches off) then back to the white screen need help fast please!

If you have not done a factory reset on the device, I recommend doing a complete factory reset.
Factory Reset - Warning this will reset device back to original factory settings.
This method will not erase any MDN/MIN information
Turn off the phone
Press Power + Volume Up/Down at the same time and hold until display will show a triage android screen
Display will show:
Reboot system Now
Apply sdcard:update.zip
Wipe Data/Factory Reset
Wipe Cache Partition
Use VOL Down key to scroll down to "Wipe Data/Factory Reset", press home icon to select option and wipe device.
Display shows "All user data will be wiped out", press VOLUME Up to continue or VOLUME Down to exit.
Press Volume Up
Press Home to select "Reset System Now" - device will reboot
If the problem persist I recommend having a store technician take a look at the device.
Copy and paste the link below into your browser's address bar for the store locator.
http://www.verizonwireless.com/b2c/storelocator/index.jsp

White screen of death with clicking sound?

i got a White screen of death with clicking sound after crashing in boot camp with winXP, i try to put in the macbook installed disc, but nothing happened & i cannot reject the CD, is it the hard drive problem & how can i fix it? do i have to replace the hard drive....

It appears that Apple knows about the problem now: http://venturebeat.com/2010/11/04/apple-admits-to-macbook-air-screen-problems-in ternally-software-fix-coming/
The only problem is that I ended up buying a new Macbook Air and Apple is taking back my other one. The wanted me to send it in and have them replace it, but it's my only computer and I can't be without it for a week. It would suck if they come up with a software fix and replacing it was not necessary.
Support was very helpful and worked with me for a few days trying to isolate the issue. I don't get the horizontal lines (I get a solid grey, white, black or blue screen), so I am not sure if my issue is the same as the one that Apple is recognizing.

White screen of death + labtop screen not working (HELP PLEASE)

Hello guys and thank you for reading this.
As you can probably guess, I am no computer pro. I own a HP labtop (A8 quad-core vision AMD). Recently I wanted to log back on it and found out that my screen had broken while I was moving out. I then proceeded to plug my acer screen to it with the blue
plug (you know the one with the 2 little screws :P) and when I finally logged on I saw that i had what they call the "white screen of death".
I found out many videos and articles explaining how to get rid of this white screen. Unfortunately, when I start up my PC and press F8, I dont see this on my acer screen, for some reason it goes up only when I can log in to my computer so I can't see the
Safe mode and everything.
It would be my greatest pleasure if someone could help me to get back into my labtop.
Thank you for your consideration (sorry for the typos english is my 2nd language)<
Gabriel.

As per my understanding, boot up screen will come up on primary display. Since, primary is broken so you wont get it in external display.
Arnav Sharma | http://arnavsharma.net/ Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading
the thread.

White Screen of Death (or coma, at least)

Similar Messages

Maybe you are looking for