WHITE SCREEN OF DEATH REM

I have a Zen Micro 5 gig. Had the WHITE SCREEN OF DEATH.
Upgraded to the latest firmware. Recharged for a loooooong time.
This is WHAT WORKED FOR ME:
I took out the FULLY CHARGED BATTERY and counted to 0 slowly.
I put the battery back in.
I held my finger on the PLAY/PAUSE button.
I then pushed the ON button to the ON position and held it till I saw an image
then release it and removed my finger from the PLAY/PAUSE button.
RESULT:? I can see what Creative wants me to see when I turn it on, a little puddle of
Zen water and Now Playing and all the other stuff.
In other words, it works again.

I have the same "white screen problem" on a daily basis. I have also been holding both buttons for a minute. Sometimes it helps. Sometimes the Apple logo appears for a less than 5 seconds - and then the screen turns white again. In the last few days the problem seems to have got worse, rendering the iPod Touch useless. Fully charged battery and enough memory to work with. I was close to throwing the machine out of the window - then tried to do a double-tap on the screen after pressing both buttons for a few seconds. This seems to cause a true re-start. I have tried to wipe the machine and reinstall software one by one. Same problem.

Similar Messages

White Screen of Death Questions [PLEASE HELP!]

If someone actually cares about my issue, they will read all of the following. Let's see how many of you are out here and how many just want to answer simple short questions for reputation.
Okay, so I've ran into my first ever iPod Touch issue. I've never owned an iPhone, but I have had an iPod in the past and know a bit about them. I'm going to be 100% honest and I need a serious answer because I'm upset and angry. If anyone can be bothered to read the following, THANK YOU. If anyone could help me out in any way by giving me suggestions/tips and/or a solution, THANK YOU. But anything that can help is appreciated.
I had my board shorts on when this ocurred. I went to the toilet, doing my own business. I had my iPod Touch in my bank pocket which went to about half way down my thigh. The iPod Touch at the time was facing away from my thigh. Pulling down my pants, the iPod Touch hit the tiled floor. It hardly even hit the floor, all I heard was a little click and I realised it was my iPod. It was flat at the time, I picked it up and pressed the Home button immediately to ensure it was okay. It sort of lit up like a white background, but had a very low opacity. Since it was flat, I assumed it was normal.
Putting my iPod on charge right after my toilet break, I waited and waited for it to charge quickly enough for me to see the screen as I was a little worried not having seen that faded screen before. When the Apple logo was to appear, it gave me a lit up white screen. I was so confused as there were no marks AT ALL on my screen or any other part of the iPod.
NOTE: My iPod is still under warranty.
Did my research and came to the conclusion that it was the infamous 'White Screen of Death'. Where do I go from here? I have no clue!
I have important information such as a To Do list and my Contacts within the iPod. I NEED to retrieve this information. Is there any way I can do this?
I can still use the iPod, as if the screen were showing. Sounds are working, but there is just a blank, lit up white screen. Sometimes when I hold the Home button, On/Off button & the Volume Up buttoon all at the same time for ~10-20 seconds, the Apple logo comes up as if the screen was all fixed. 5 Seconds later, it goes all funny as if there were faded white lines and a faded white background but still being able to see the logo/screen. When the iPod loads, it just goes back to the lit up white screen.
Here's another odd thing to this, when I leave my iPod Touch sitting in a spot remotely, without touching it for a few hours, when I come back to it and hit the Home button, the iPod will begin to work fine as if nothing ever happened. No white screen, no nothing, just simply use it as I wish. I can even sometimes lock it, and then unclock it again with it still showing perfectly. However, when I tend to click the On/Off button after this happens, or if I just continue to use it for ~1 minute, it will eventually do the same as the above paragraph in second last sentence.
This may be important:
The iPod charges fine.
The iPod can be used with my computer and iTunes fine.
To sum it all up, everything can be done, including using the iPod, but with a lit up white screen.
Here are some questions I have for you guys:
Will Apple cover this in my warranty?
If they won't, what should I do?
How much would a replacement screen cost?
Should I attempty to open my iPod if they do not cover it by warranty? (I have not attempted as I don't want to void anything).
What could be the cause and why?
How can I retrieve that important information? (Contacts & To Do List)
Have you got any suggestions/tips for me?
I need this resolved guys. I'm very upset and angry over the whole situation. If a little thump on the tiles like that (it's not like I dropped it or anything) can damage the screen that much, then this devices from Apple can't be very reliable. All I'm asking for is some genuine service/help to resolve my issue. If this can be done, I will be one VERY happy person.
Daniel

Will Apple cover this in my warranty?
As stated above it is not covered by the warranty as it will be deemed accidental damage. You can try explaining what happened to somebody at the Genius Bar and they may cut you some slack and replace it at no cost. They might not though as Apple has started to really come down hard on eliminating replacing accidentally damaged iPods at no cost.
If they won't, what should I do?
Again, bring it into them anyways and explain what happened. You have nothing to lose either way. Otherwise, you really only have 2 other options. Send it to a third party service center to have them take a look at it and possibly repair the iPod, or do some studying online and learn how to open up the device yourself and take a look. There are some excellent step-by-step repair guides at http://www.ifixit.com/.
How much would a replacement screen cost?
This depends on where or how you have it repaired. Here is Apple's repair pricing guide.
http://www.apple.com/support/ipod/service/prices/
Third party repair centers will cost less and they'll actually swap out the bad part rather than just replace the entire iPod as Apple does.
Should I attempty to open my iPod if they do not cover it by warranty? (I have not attempted as I don't want to void anything).
If you have a warranty on it still, I wouldn't quite yet. Take it to your local Apple store as explained above. Otherwise, I would only if you feel comfortable working with small electronics and consider yourself handy with them.
What could be the cause and why?
As stated already, it could be a damaged or loose LCD ribbon cable or the LCD screen itself is damaged. As to what exact component, there is no way to tell.
How can I retrieve that important information? (Contacts & To Do List)
Make a backup of the device in iTunes before taking or sending it in for service or before you decide to open it up (if you do happen to go that route). See here what is included in the backup of the device.
iTunes: About iOS backups
If you get a new or replacement device you can restore it from that backup.
Have you got any suggestions/tips for me?
As I have already stated numerous times, try taking it into your local Apple Store and see if there is anything can do for you such as swap it out. Remember that they are not obligated to do so since the damage is technically accidental. Be kind and polite when explaning what happened. You never know what could happen!
B-rock

White screen of death from game. And a new game not working at all

My iPod touch 4th gen has been getting the white screen of death when I try to play plants vs zombies why does this keep happening and is there a way to stop it from happening again?
And I recently installed fruit ninja and it won`t work at all it opens but it just says loading and then it crashes and I've tried running it in safe mode and it still dies the same thing what can I do to get the game to work?

- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar

My iPod touch 4th gen has the white screen of death and won't connect to iTunes to restore.

I was updating from iOS 6 beta 1 to beta 2 when my ipod froze up and started showing the white screen of death. I've tried the trick where you hold the power and home button for ten seconds and tried to put it in DFU mode to restore. None of these tricks work and my screen is still white. Also I plug it into my Windows Vista computer with iTunes 10.6.3 but it wont show up. I really need help. I don't have warranty or money to buy a new one. My grandmother will heartbroken if $200 goes down the drain.

Im not developer and I have ios 6 click this link http://www.youtube.com/watch?v=kHvf6Wty0nk&feature=plcp but anyway try putting it into dfu

My ipod touch 4th gen. is stuck on white screen of death.

I recentally had dropped my ipod touch and when i picked it up it was stuck on the white screen of death. I tried to hard restart by holding down the power and home button at the same time, but the screen would only turn off then come right back on. Then i let the power drain. After it would no longer turn on i put it on the charger to find that the white screen would pop right back up. I didnt want to restore it but because its my only option i put it on my compute but itunes couldnt acess it because i had a passcode on it. is there a differnt way to restore it or fix it? HELLLPPP MEEEE!

Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar

IPod Nano white screen of death - RESURRECTED! :D

Alright, here's the deal...A friend of mine has a new iPod Nano and gave it to me because it had stopped working, and was hoping it was worth something to recover. Sorry about the long story!
It _wouldn't_ turn on. But, when connecting it to the computer via the USB dock cable, it comes on for a few seconds on a grey-whitish screen. Then turns back off, reboots, and tries again. Step 1 step 2. Nothing.
Although, 'Diagnostics mode' or whatnot it is, does work however. It would still be a faint grey screen, but whiter and more vibrant, as if it's saying "Hey, I'm alive! I'm alive!!!" and I can go through settings and make it (sometimes) change colors, and reboot the iPod.
I was thinking since iTunes never recognized it (It was plugged in the whole time) that I would drown in just for the sake of it.
Well, 3 hours later after attempting to kill the poor thing, it... resurrected itself.
I'm serious, it really seems to have unbelievably done it. When turning it on, I get 2 beeps, but no restart loop, the LCD stays on the white screen though, BUT, here's the good thing.
NOW, I hear the system 'click' sounds when using the buttons and such that it's going through the menu, good news so far! It seems like it because after the 'boot' sequence (it appears to boot very fast, strangely).
The good thing is (kinda) https://discussions.apple.com/thread/1517571?start=0&tstart=0 ... So I suspect that somehow, this method of submerging it under water, letting it dry, blowdrying it, and then leaving it in the heat, somehow restored the SD chip inside of it... possibly only for now... I'm going to use this moment to hopefully get all data off the device, and see for one last time if it's fully restorable...
I have the power! Ok, so I hooked it up to the wall charger (just put the wall connector on the USB cord) and it now beeps two times, and after about 30 seconds or so, I get to the main menu, screen still white, but I can certainly hear the click letting me know I'm 'navigating' the iPod. It doesn't appear to have any music on it, or maybe it does, but I need to connect some earphones first. Or, it supposed to be display the 'sad iPod' icon, but I just don't see it, therefor, I'm blind as to the status of it.
I likely guess it's the battery, since every time I disconnect it, it goes dead. Yep, just looked back, still on. Yep, still menu clicking. Yep, I can start it with no problems now. Any clue what I can try to do to resolve this? Obviously it's turning on, and it seems to be doing something, it boots, (apparently) so that's a good sign.
Please, is there any hope at all in this iPod? At all?
AND, IT JUST BEEPED 2 TIMES AGAIN! And I was just typing... why did it do this? (Funny thing is, how it still works!) Is that really the menu button clicking? That would explain it, I mean it only plays the menu clicking sound AFTER about 30 seconds of it 'booting' to the iPod firmware, so it obviously has some sort of life to it. If I hook up my earphones... Holy Mac! I hear music! It's alive!!! It's alive!!! Oh my man!!! Yes!
It has hope, in a way!
Atleast, I hope, but it works! Freaking amazing! Jamming to some awesome beats right now, some cool hip hop, sound quality you ask? Great, actually! I don't know how, don't want to know, but it seems trying to kill this iPod actually resulted in it being resurrected? How? Who knows! This is awesome! iPod truly CAN have 2 lives, I guess!
Cool stuff, I swear on that! My favorite song was on here too!
How to adjust the volume on the iPod Nano? I don't care, it's playing at full volume, and it's awesome!
The sad thing is, it still has the white screen of death, and the battery is apparently fried still (or needs a good 24-hour charging).
This iPod has been sitting dead as a dud in the storage room for a good 1 year or so, unused. And now it came back to life in a flash. Unbelievable.
I love you Apple.

Your problem was moisture. It was wet inside and sitting around for a year let it all dry up.
If you get this kind of thing happening, speed the process up by putting the iPod into a zip lock baggie with a dessicant (you know those little silica pouches) or even some rice to absorb the moisture. Let it sit for a few days and it should dry it all out.
i

How to deal with the "white screen of death"?

My 1 hour old iMac (27 inch i5) just died. I had used it for less than 30 mins when it downloaded an OS update and rebooted. Then it refuses to boot, stuck in a white screen.
After that I slid in the recover disk and used the disk utility to restore the HDD as in the recover manual. It then spent 30 mins recovering,. However, on re-start it is still stuck in the white screen of death.
What do i do now?

Hi anerjee;
With a brand new Mac, personally I would not mess with it. I would take it back to Apple and ask them to fix it.
Allan

I think my hard drive might be fried!/White screen of death sequel

Yeah...So to add to the lovely white screen of death that I had before, I CAN now put the OS X disks in the cd drive. BUT here's the catch. To get into the disk first aid, it goes through it as it should, BUT there's no hard drive image!

That would be freakin' sweet if it could do that. I wouldn't want to have something run on a USB port 24/7 but I'd rather not have to be without a computer either. I'm running on my parent's iTV right now.

White screen of death - iMac OSX Lion

I upgraded my 2007 iMac to Lion and after a few days of perfect running the think locked up. When I forced the power off and back on it seemed to be booting fine (chimes, apple logo, disk spinning up and I could hear the drive head seeking) but then it froze up in the "White Screen of death" (WSOD). It was complete lockd up again, and nothing would bring it back. I had to reboot again. And again. Everytime it seems to be ok, but then locks up after it the screen goes white. . I did command option , p r keys with three chimes. I have unplugged it and let it sit. I disconnected all periferals. I reset the SMC. I booted into Single User mode and used unix commands to check the HD. No errors found. I disconnected my wireless Time Capsule.
Note that it appears to be booting fine at first with the useaul Apple Logo. And when I boot into the Single User mode all the text indicates no faults. The display and HD appear fine.
I inserted my original OSX Leopard disk and and tried to boot from it, using the "C" boot process and the Option boot method to manuualy select the DVD. No good. It just went into the WSOD again.
I have no idea what to try next!

RATS!
After ersing (and zeroing) out the HD nothing changed. I still could not completely boot up the install disk. I tried the original Leopard disk, and the Apple Lion USB thumbdrive. Both started the boot process, and gave me the grey Apple logo. But then after a minute or two jumped into the White Screen of Death.
I then replace both RAM chips. No change.
Now I have a brick. A very large and heavy brick.
But the computer will woerk as Target Disk Mode, and it actually goes through a normal boot cycle. That is, I can go into the Single Ud=ser mode and all UNIX command work fine.
Does anyone have any additional ideas of what can cause this?
Peter

White screen of death with little black clock thing

I've had the so called white screen of death for 2 days. Phone was locked in pocket. Took it out and there was a tiny error message on the screen. unfortunately I can't tell you what message it was :-(
Removed battery for long and short periods. Each time, when put bavck in, the led light flicks on and i get the white screen (without me powering it up). The phone is totally unresponsive.
I've tried the following but the computer recognises my phone (instead of 'unknown'), then I get the message "The Blackberry Desktop Software does not have Blackberry Device Software for the device that you have connected to the computer. Contact your wireless service provider or system administrator".
Done the downloads then nothing apart from the phone turning itself off. HURRAH! However, it's back to square one because if I touch it, we go back to the beginning.
1) Make sure you have Blackberry Desktop Manager installed.
http://na.blackberry.com/eng/services/desktop/
2) On your PC, go to Start > Run and copy and paste the following line exactly (meaning with the quotation marks):
"c:\program files\common files\research in motion\apploader\loader.exe" /nojvm
3) The Application Loader Wizard will appear -- click "Next."
4) In the "Connection:" drop-down menu, you should see "USB-PIN: UNKNOWN". Click the "Next" button.
5) You should then see a list of applications ready to be installed for your Blackberry. Hit Next and Finish and you are well on your way to getting your Blackberry back to life. Congrats! Just don't disconnect anything and let the lengthy process finish completely.
NOTE: If you do not see a list of applications mentioned in step 5 and instead see the message "The Blackberry Desktop Software does not have Blackberry Device Software for the device that you have connected to the computer. Contact your wireless service provider or system administrator," then you must download Blackberry's Operating System for your carrier and device.
http://www.blackberryfaq.com/index.php/BlackBerry_Operating_System_Downloads
Just select the appropriate carrier and network type, select your Blackberry model from the list and download the latest version. Install this download and follow the above steps again and you should be on the right path.
I've tried all of this on the old, slow laptop but have a mac as well.
PLEASE someone HELP!

Suzi-Q wrote:. Seriously fed up about not being able to back up on a mac
Hi you can use the mac
http://us.blackberry.com/apps-software/desktop/desktop_mac.jsp
However, if you haven't already done a backup, it is most certainly too late, but its worth a long-shot.
From your original post, it seems to me you did most things except a complete wipe without which I think you may be stuck with the white screen. Whether you use JL_CMDER or BBSAK to perform this vital step, they need a Windows OS. Whilst I do not have any mac knowledge, I do know that you can run Windows 7 on the mac. However, sounds like a faff to me. Can you not borrow a friends PC?
Below are the wipe and reinstall instructions which includes using JL_CMDER
This what I did to completely wipe my BB. I wrote this before starting and printed it off.
If your device is functioning, perform a backup now if you haven't already done so saving the file to a place and in a name that you can easily locate on computer.
I then uninstalled DTM and then deleted all other references to BB/Rim in Windows Explorer thus removing the OS for the BB from the computer in order to ensure that the version I would reinstall would be a brand new downloaded version.
Get the latest Desk Top Software (DTS)
http://us.blackberry.com/apps-software/desktop/?CPID=OTC-DSKTPSW&cp=OTC-DSKTPSW
and install it on the computer.
Get the correct latest version of the OS
http://us.blackberry.com/support/downloads/download_sites.jsp
and save it to computer.
To erase all the data on your BlackBerry device, complete the following steps.
1) Download JL_Cmder from http://www.4shared.com/get/oqP9V-2Q/JL_Cmder_v19.html
2) Install JL_Cmder to computer.
3) Double check you have already backed-up the BB. If you DO NOT, you will lose ALL data.
4) Make sure the DTS is closed and plug in the BB to computer via USB
5) Go to the JL_Cmder on your computer and double click it to start. Now,this may take a few tries to connect, so keep trying until it does.
6) On the first screen, Press any key to continue.
7) Now, if your device uses a password, enter it now. If not, press "N"
8) Press 4 to initiate the WIPE
9) Press "Y" to continue
10) Now type "blackberry" to continue
11) On the BB you will see a white screen with a'507' Error. Don't worry, this is what you want! You are now ready to install the OS.
Launch the new Desk Top Software on the computer
1). On the home screen of the BlackBerry® Desktop Software, click Device > Update my device.
2). Click View Other Versions. Click the version of the new OS you previously downloaded.
3). Click Install. The DTM will install the OS and then provide you with a list of applications to install. If you have had difficulties with an app, do not install it.
Do not disconnect the device until the whole process is completed and the device has rebooted.
After 10 minutes reboot again by removing the battery whilst powered-on and leave it out for a couple of minutes.
Leave it again for 10 minutes. You should now have a fully functioning BB!
Blackberry Best Advice - Back-up weekly
If I have helped you please check the "Kudos" star on the right >>>>

I have a 13 inch MacBook Pro (2009) & the "White Screen of Death" is present. Need help?

I have a 13 inch MacBook Pro (2009). Recently I bought an extended hard drive because I had used up the memory on my iDisk. As I was running the Time Machine back up on my new extended drive, the battery on my Pro ran out causing it to shut down. Once I hooked up my Pro to the power cord & logged in, the "White Screen of Death" appeared on the home display. Obviously the battery still works, my phone is able to charge along with the extended drive, I am able to adjust the lighting on my keyboard along with adjusting the brightness on my screen, but the "White Screen" remains. I need help in determining the cause of this issue & the steps I'll need to take in order to resolve this. I love my Pro, all my documents, photos & music are on it & the last thing I want to do is kill my wallet by buying a new Pro. So could someone on here please help me? It would be greatly appreciated & I thank you in advance!

Take each of these steps that you haven't already tried. Stop when the problem is resolved.
Step 1
The first step in dealing with a boot failure is to secure your data. If you want to preserve the contents of the startup drive, and you don't already have at least one current backup, you must try to back up now, before you do anything else. It may or may not be possible. If you don't care about the data that has changed since your last backup, you can skip this step.
There are several ways to back up a Mac that is unable to boot. You need an external hard drive to hold the backup data.
a. Boot into the Recovery partition, or from a local Time Machine backup volume (option key at startup.) When the OS X Utilities screen appears, launch Disk Utility and follow the instructions in this support article, under “Instructions for backing up to an external hard disk via Disk Utility.”
b. If you have access to a working Mac, and both it and the non-working Mac have FireWire or Thunderbolt ports, boot the non-working Mac in target disk mode. Use the working Mac to copy the data to another drive. This technique won't work with USB, Ethernet, Wi-Fi, or Bluetooth.
c. If the internal drive of the non-working Mac is user-replaceable, remove it and mount it in an external enclosure or drive dock. Use another Mac to copy the data.
Step 2
Press and hold the power button until the power shuts off. Disconnect all wired peripherals except those needed to boot, and remove all aftermarket expansion cards. Use a different keyboard and/or mouse, if those devices are wired. If you can boot now, one of the devices you disconnected, or a combination of them, is causing the problem. Finding out which one is a process of elimination.
If you've booted from an external storage device, make sure that your internal boot volume is selected in the Startup Disk pane of System Preferences.
Step 3
Boot in safe mode. Note: If FileVault is enabled, or if a firmware password is set, or if the boot volume is a software RAID, you can’t do this. Post for further instructions.
Safe mode is much slower to boot and run than normal, and some things won’t work at all, including wireless networking on certain Macs.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
When you boot in safe mode, it's normal to see a dark gray progress bar on a light gray background. If the progress bar gets stuck for more than a few minutes, or if the system shuts down automatically while the progress bar is displayed, your boot volume is damaged and the drive is probably malfunctioning. In that case, go to step 5.
If you can boot and log in now, empty the Trash, and then open the Finder Info window on your boot volume ("Macintosh HD," unless you gave it a different name.) Check that you have at least 9 GB of available space, as shown in the window. If you don't, copy as many files as necessary to another volume (not another folder on the same volume) and delete the originals. Deletion isn't complete until you empty the Trash again. Do this until the available space is more than 9 GB. Then reboot as usual (i.e., not in safe mode.)
If the boot process hangs again, the problem is likely caused by a third-party system modification that you installed. Post for further instructions.
Step 4
Sometimes a boot failure can be resolved by resetting the NVRAM.
Step 5
Launch Disk Utility in Recovery mode (see Step 1.) Select your startup volume, then run Repair Disk. If any problems are found, repeat until clear. If Disk Utility reports that the volume can't be repaired, the drive has malfunctioned and should be replaced. You might choose to tolerate one such malfunction in the life of the drive. In that case, erase the volume and restore from a backup. If the same thing ever happens again, replace the drive immediately.
This is one of the rare situations in which you should also run Repair Permissions, ignoring the false warnings it may produce. Look for the line "Permissions repair complete" at the end of the output. Then reboot as usual.
Step 6
Reinstall the OS. If your Mac was upgraded from an older version of OS X, you’ll need the Apple ID and password you used to upgrade.
Step 7
Repeat step 6, but this time erase the boot volume in Disk Utility before installing. The system should automatically reboot into the Setup Assistant. Follow the prompts to transfer your data from a Time Machine or other backup.
Step 8
This step applies only to a Mac Pro tower, not to any other model. A dead logic-board battery can cause a gray screen at boot. Typically the boot failure will be preceded by loss of the startup disk and system clock settings. See the user manual for replacement instructions.
Step 9
If you get this far, you're probably dealing with a hardware fault. Make a "Genius" appointment at an Apple Store to have the machine tested.

Since updating the software on my iPhone 3gs it has developed the so called "white screen of death". The phone has not been dropped or damaged in anyway, the problem only developed after software upgrade. Rung apple and they were less than helpful

since updating my iphone 3gs software it has developed the so called "white screen of death" this happened immediately after software install. It has never been dropped or damaged. I have tried the solution which seems to pop up most of holding down the power button and the home button for 10 seconds but this hasnt helped at all. Tried ringing apple, who were less than helpful and disinterested as the phone is out of warranty. I am hoping there is a solution which doesnt mean shelling out for a new phone! any ideas?

Basics from the manual are restart, reset, restore.
Try all of these.
If these fail, then:
iOS: Unable to update or restore

White screen of death with itunes 7

I recently had to restore my computer so I lost everything. So when I was trying to reinstall my ipod and itunes my ipod froze...WHITE SCREEN OF DEATH!!! I tryed restarting it, put it into disk mode, and to restore it. But when I try to restore it my itunes likes to freeze up as well...urg...I've done this about 3 times and the same thing every time. but what makes everything even worse is that my itunes wont open now and i also have reinstalled it like 3 times...what do I do now??? Can I go and get the older itunes??? and if so how???
5th gen iPod Windows XP

Welcome to Apple Discussions!
Is your iPod showing the White Screen?
Can you get your iPod into Disk Mode?
Putting iPod into Disk Mode
After you get it into Disk Mode, try to restore it (after you get iTunes working).
See if this helps with iTunes not opening...
iTunes won't open or unexpectedly quits
You may also want to post/look through the iTunes forums.
btabz

White Screen of Death on iPhone 3GS

My iPhone is stuck on white screen and i can't get rid of it.
My power button is broken so I can't fix it that way and when i try to restore it back to factory settings it works for a few seconds and then goes back to white screen of death.

This is most often due to faulty LCD display, and the fix is LCD replacement. Or if your iPhone still has Warranty or Apple Care coverage, replacement under warranty.

Satellite A350 - White Screen Of Death

Hi
I recently broke my screen in a temper tantrum and sent it in to Toshiba repair.
They replaced my screen. That was about a month ago.
I installed windows 7 3-4 days ago and it worked fine.
I opened my laptop one night to discover a blank white screen.
After turning it off and on, taking the battery out and in, the white screen still remained, then it randomly appeared with system restore options
I restored the system and applied a microsoft hotfix to counteract the supposed windows 7 error. it did not work.
The white screen appears when i put the laptop to sleep (shut the laptop) or shut it down.
The screen appeared again yesterday and i left it overnight hoping it would change.
My sister pulled out and put back in the battery and a screen appeared asking how you would like to start windows.
I started windows then reinstalled Windows Vista using a mirosoft setup disc.
After installing AVG antivirus it told me to restart.
I restarted the laptop and instead of the toshiba logo appearing the white screen of death appeared.
It stayed for 10-20 seconds then my laptop started.
I looked at this article (http://www.laptoprepair101.com/laptop/2008/04/13/laptop-lcd-screen-turned-white/) and it suggested the screen may have problems. Should i send it back in to Toshiba?
Can someone supply further diagnosis?
My specs:
Intel Core 2 Duo CPU P7450
2.13ghz
4.00GB RAM
32 bit OS
So basically i have a random white screen when i restart, turn on or bring the laptop back from sleeping. whether it recovers is a strange thing with many factors. i don't think its my OS because it happens on Vista and Windows 7
please help as much as you can. i don't wan't to take it in for repair as it may cost money

The screen has a 2 month warranty from the repair and the laptop still has half a year of general warranty. when the white screen appears i tried using HDMI to connect it to a TV and there was no change. Could it be due to the fact i upgraded to Windows 7? if so will they still charge me? is there any test i can do to check if it is a Hardware issue or a screen problem?
i shut the laptop for a while yesterday and my brother opened it to see the white screen. i grabbed the right side of the screen and pushed it back and the logon screen came up. what would that suggest?
thanks for the help

WHITE SCREEN OF DEATH REM

Similar Messages

Maybe you are looking for