White screen on brand new MBP 13"

Dear all,
I bought a 13" MBP only a week ago and Im starting to see some very strange behavior.
I have a 22" (1680 * 1050) external display connected with a original miniDP - DVI.
Yesterday when I was working both my laptop display and my external display turned white and I couldn't do anything but to restart the computer. This happened two times in a day and I decided to keep working without the external monitor and since then I haven't seen the problem.
What is causing this? I sit in a very hot environment, but I think its really bad that the computer doesn't take care of this by increasing fan speeds and limiting the resources to keep the cool. I only had one instance of Safari and Eclipse open, nothing using a lot of graphical power.
Is there any thing else I'm missing?
Kind regards
Erik

This happens on my 2010 13" MBP too. So far it has happened about 10 times since I bought this machine right after it was released, and only when an external screen has been connected via miniDP->DVI. None of the temperatures in istat or Temperature Monitor lite have been above 55 degrees when this has happened, so I really don't think it is temperature related.
It is terribly annoying when a screen whiteout strikes out of nowhere, and I am working on the machine without knowing if the work will be saved or not. Sometimes iTunes has been playing in the background without interruption, so it only affects display output it seems. Nothing happens if i pull the miniDP->DVI adapter, or anything else I can think of, except holding the power button for 4 seconds for a hard reset.
I usually just do office work and email on this machine, so it hardly ever sees intense CPU or GPU loads.
I had display issues with my 2008 Macbook as well (resolution choice for 16:10 disappeared), so far I have had less issues with my Hackintosh than the two genuine Apple machines I have. Go figure.

Similar Messages

Whenever I press the unlock button on my iPod touch 4g it shows just a blank white screen. Brand new iPod, never dropped.

Ive restored it but it hasn't been working. When I press the unlock button it turns white. This happens usually always but sometimes if I get lucky it'll work fine. I got this iPod off amazon and that is how it came. Any suggestions?!

I've done that multiple times but it doesn't fix it, because when it's back on, the problem happens again. I've even called Apple and they told me to restore it, and I did, but still nothing changed, exept that I've lost everything on my Ipod Touch.

Hey i bought a brand new MBP like 6 months ago and now it won't charge

i bought a brand new MBP like 6 months ago and now it won't charge. I tried using a friends MBP charger of the same year as my computer but it still says not charging at the top right corner of the computer screen where the charging symbol is. This problem just happened out of nowhere because it was working the day before then the next day it just stopped working saying it is not charging. I tired doing all of the suggested techniques to fix it but not luck.
This is the battery report is when my MBP is either connected to my charger or my friends charger which works perfectly on her computer.
Battery Information:
Model Information:
Serial Number:          W013*****3BA
Manufacturer:          SMP
Device Name:          bq20z451
Pack Lot Code:          0
PCB Lot Code:          0
Firmware Version:          201
Hardware Revision:          000a
Cell Revision:          158
Charge Information:
Charge Remaining (mAh):          3137
Fully Charged:          No
Charging:          No
Full Charge Capacity (mAh):          5751
Health Information:
Cycle Count:          126
Condition:          Normal
Battery Installed:          Yes
Amperage (mA):          0
Voltage (mV):          11528
System Power Settings:
AC Power:
System Sleep Timer (Minutes):          10
Disk Sleep Timer (Minutes):          10
Display Sleep Timer (Minutes):          10
Wake on AC Change:          No
Wake on Clamshell Open:          Yes
Wake on LAN:          Yes
Current Power Source:          Yes
Display Sleep Uses Dim:          Yes
PrioritizeNetworkReachabilityOverSleep:          0
RestartAfterKernelPanic:          157680000
Standby Delay:          4200
Standby Enabled:          0
Battery Power:
System Sleep Timer (Minutes):          10
Disk Sleep Timer (Minutes):          10
Display Sleep Timer (Minutes):          2
Wake on AC Change:          No
Wake on Clamshell Open:          Yes
Display Sleep Uses Dim:          Yes
Reduce Brightness:          Yes
RestartAfterKernelPanic:          157680000
Standby Delay:          4200
Standby Enabled:          0
Hardware Configuration:
UPS Installed:          No
AC Charger Information:
Connected:          Yes
ID:          0x0000
Wattage (W):          0
Revision:          0x0000
Family:          0x0000
Serial Number:          0x00000000
Charging:          No
As you can see where it is labeled "AC Charger information" it states that its connected but there is no Wattage and says its not charging .
What is wrong with my mac? Is it serious and does Apple Care cover it?

Have you done a SMC
http://support.apple.com/kb/HT3964
Items include
Power
The computer doesn't respond to the power button when pressed.
A portable Mac doesn't appear to respond properly when you close or open the lid.
The computer sleeps or shuts down unexpectedly.
The battery does not appear to be charging properly.
The MagSafe power adaptor LED doesn't appear to indicate the correct activity.

Kernel Panic and a strange sound on a two days brand new MBP 17" i7

I just got a brand new MBP 17" i7 two days ago. Already had two issues:
1. On the first day while the computer was doing an automatic software update I heard a loud horn type sound coming from within the machine. After that the screen turned grey with the Apple logo and a status bar underneath. After that the machine returned to the "normal" screen and keep working.
2. Yesterday while trying to set up a mighty mouse the computer gave me the kernel panic screen. I turned the computer off and then on again and everything seems fine.
I contact Apple and they gave me two options for my peace of mind:
1. Take the computer to an Apple Genius bar
2. Send the machine back to the store
I own an iMac and a Macbook and this things had never happened before. I don't think it's normal for a brand new computer to do things like that.
This incidents took place within the first two day of receiving the computer, but maybe down the road or as I start installing programs like Final Cut Studio 3 or Office for Mac, things could complicate...
What do you recommend?

Hi there.
The noise you heard and the status bar is usually the result of a firmware update being installed. Nothing to be concerned with and in fact will probably happen again if they just swap out the machine.
The kernel panic may have just been a fluke but you could try running the Apple Hardware Diagnostics that actually shipped with the machine to rule out hardware. If the tests come back ok then you could try to just re-install the OS.
Good luck.

Aperture 3 not working on brand new MBP???

Just tried to open Aperture 3 on my brand new MBP and I get this error message:
Dyld Error Message:
Library not loaded: /Library/Frameworks/PluginManager.framework/Versions/B/PluginManager
Referenced from: /Applications/Aperture.app/Contents/MacOS/Aperture
Reason: no suitable image found. Did find:
/Library/Frameworks/PluginManager.framework/Versions/B/PluginManager: no matching architecture in universal wrapper
I downloaded A3 from the Mac Store, I've deleted it and re-installed and still get the same message. My MBP is running 10.6.8.
Any ideas, hope you can help.
Thanks!

Hi, Thanks! The solution on the Macrumors forum worked! A plugin manager issue!
I've copied the solution below for anyone else who may run into the issue.
Turns out it's a simple fix.
For those with the same problem:
1. Navigate to: /Library/Frameworks/PluginManager.framework/Versions/B/PluginManager
2. Delete the PluginManager
3. Get a new copy of the PluginManager. (You can copy one from a friends macbook) or use the one hosted here: http://qvenon.com/files/PluginManager.zip
Thanks again!
best,
upgrayedd1

I replaced my phone at apple y'day, due to a broken screen. Brand new phone, but i am unable to connect to wifi, at home or work, so presuming its a fault with the phone? not router, i have also done a software update, is there a solution? thanks

i replaced my phone at apple y'day, due to a broken screen. Brand new phone, but i am unable to connect to wifi, at home or work, so presuming its a fault with the phone? not router, i have also done a software update, is there a solution? thanks

Hi Eric,
What message do you get when you try to connect?
Cheers!

My brand new MBP 13"got the error "there is not enough memory or disk space to convert this document". What gives? Help please!

I am trying to use mail merge in Word for Mac on My brand new MBP 13". And I get the error "there is not enough memory or disk space to convert this document". What gives? Help please!

Why do I get there is not enough memory...: Apple Support Communities
Error message in MS Word opening a .docx file "There is not enough - Microsoft Community

Magic mouse lag on brand new MBP

Hello,
I received my MBP 15" (Mid 2012) several days ago. But my Magic Mouse doesn't work very well with it. The cursor lags every several minutes to one hour or two, and lasts for several seconds to several minutes every time. I don't mean that the movement is slow - when it happens, the cursor doesn't follow the movement of the mouse very well, it seems 'jittery'. The cursor may "jump" to the destination 0.3~1 second after I moving the mouse. I tried everything I can do but the problem is still not solved. Here are what I've tried:
* Setting my router to 5ghz band
* Turn the mouse off and on.
* Turn the mouse off, replace the batteries to new ones, and turn on.
* Restart the computer.
* Remove the mouse from the list of Bluetooth devices, and pair again.
* Reset PRAM and SMC.
* Disable WIFI.
* Unplug everything in my room that has a wireless receiver, including Xbox, Apple TV, etc, and remove the batteries of their controllers.
None of the above works! However, I also have a Magic Trackpad which also uses Bluetooth but it works fine. I tested the Magic Mouse on my old MacBook Pro and it works without any problem. The distance between the mouse and the laptop is less than 2ft.
Mouse still works fine on my old 2010 MBP.
Brand new MBP 15", 256GB SSD, 8GB RAM.

I had the same problem with my new Retina Macbook Pro and my Magic Mouse that worked fine on my previous 2010 Macbook Pro. At work I don't have a wifi network so I share my ethernet connection via wifi so I can get internet on my iPhone and iPad during the day. After reading this thread I tried turning off the internet sharing and it has cleared up all lag issues with the mouse.
Just thought I'd share my fix. Hopefully Apple can clear up whatever issues are causing this so I can get wifi back to my devices at work.

How much does OSX take up on a brand new MBP HD?

Does anyone know on a Brand new MBP 128 SSD drive....how much is allocated to the OSX?
Thanks in advance

You do need to install Windows twice - once under Boot Camp and once under Parallels - but you can legally use the same CD with the same licence for both installations. There is no need to buy two copies.
There is a program called Monolingual that will assist in removing the additional language support. Be care, as it has removed the components needed to run Rosetta for some users who were not as careful as they should have been.
Parallels has to run from within OS X, but some people have had success running Windows off of an external drive. I have not tried it, but the instructions can be found HERE.

FaceTime problems on 3 brand new MBP 13 Retina, Apple has given in

Hi All,
After recieving 3 brand new machines (MBP13 Retina) in Dec 2013 and Jan 2014, Apple does not believe they can deliver a proper working brand new machine. They also won't look into the problem and hope i can accept this faulty machine.
Is that what Apple is turned into? A company that doesn't believe they can fix their own machines? Or do they not care anymore about their customers and their product?
The person I'm facetiming with cannot hear me when we talk at the same time. My (3 brand new, but all 3 faulty) machines will mute me, so the other party cannot hear me. It is back to the walky talky ages again, 'over'.
Since I'm a great believer of Apple, I cannot believe they won't fix this problem and just keep on selling and delivering brand new MBP 13 Retina machines that don't work.
Does nobody at the Apple company care anymore, is there no company pride?

after a week of working on this problem the last straw was spending 3 hours being helped with this problem by 1mb.com after which time they asked me either to take out a years support at £129 or pay for help from a better qualified technician! As I only received my IPad last week I am going to send it back tomorrow. why doesn't Apple respond when it is obvious from all the discussions that there is a problem? Considering the price of the iPad I feel thoroughly disillusioned and cheated as well as frustrated by spending so many hours to no avail. this was not the only problem I've encountered but it is the one I've wasted most time trying to resolve./

Help!!! Brand new MBP with Santa Rosa Kernel Panics when started with...

Help!!! Brand new MBP with Santa Rosa Kernel Panics when started with external HD firewire 800 after 20 sec...
I don't know what it could be???
Do you???
Thanx
Jay

I'm actually having a similar issue and I don't think its related to networking at all.
I'm currently working in a corporate environment where we deploy pre-built OS X images to machines. I recently upgraded my images to 10.4.10 before we got our first Santa Rosa machine. This image was built on a MacPro and worked on all Intel Macs down to a MacMini CoreSolo. When I deployed my prebuilt image to the SR MBP, it caused a kernel panic immediately.
Further investigation revealed previous builds of OS X, including 10.4.10 upgraded from any other model Intel Mac will kernel panic the SR MBP. Going backwards the SR Build of OSX will not work on any previous model Mac, as any other build typically does, but causes severe graphical distortion, as if it does not have the display drivers for the other Macs.
To make a long story short, I think your issue comes from the fact that your external hard drive has an older build of OS X 10.4 than the SR MBP will run (even though you may have upgraded it to 10.4.10). Anyone who can corroborate my story with some more testing, please chime in.
I haven't found a solution for this issue yet other than keeping a seperate Santa Rosa Core 2 Duo image for my deployments.

Brand new MBP will only boot to blue screen

Help!
Worked fine for about an hour or two and then completely locked up. I had to do a forced shutdown to get it to turn off.. But now it will only boot to this weird blue screen with just a cursor.
Any ideas?

Actually, for a brand new machine a clean install is not a bad idea.
The original disc images are copied in bulk. The tiniest little glitch can cause later problems. It really doesn't add that much time to the initial setup process and you can also discount it as a cause if the problem re-occurs.
You should not have to do a clean install again.

Brand New MBP 13" - Dim Screen/Yellow Tint

I purchased a MBP 13" yesterday and immediately noticed the display appeared quite dim and had a yellowish-tint to the entire screen. I am aware that in previous years, certain Apple Products had the same problem and I was wondering if there is a fix that I can apply or whether I should simply opt for a new MBP?
Also, the purchase was made through Amazon and was wondering if anyone knows if I can make the return/service through the Apple Store?
Much thanks,
A.Rim

I believe there's a color calibration tool in Applications/Utilities. See if it can help you. It is considered that for a screen to display colors as close to "normal" as possible, the DeltaE measurement should be at or under 3. Also see this discussion (and the proposed discussions on the right) about this: https://discussions.apple.com/thread/2328708?start=0&tstart=0

Brand new MBP stuck on grey Apple start up screen

My new MBP 13" arrived today. I removed the SSD from my current Macbook and installed it in my MBP. I pressed the power button, and it got stuck on the grey start up screen with the grey Apple for 5 minutes. I shut it down and put the SSD back in the Macbook - worked perfectly. So I tried installing it again in the MBP, and had the same problem. It just stays stuck on the grey screen with the Apple.

Last night the electricity went out and my power surge protector was not working so my iMac just force shut downed.
So, when the electricity came back i turned on my Mac but it is *Stuck in the Startup/Boot Screen with a Grey Apple Logo,a Empty Progress Bar with stays for 1 or 2 minutes and a small Spinning Wheel which would Spin Forver! I Have tried the SMC and Pram reset but no use, i have also tried to insert my OS X Lion 10.7 Installation disk and it would not load if i hold the C Key in the Startup, I Have Managed to go to Disk Utility Through "Recovery HD" but the Volume "Macintosh HD" is Greyed out and Unmounted and i cannot repair it. There are some files that i'd like to Recover if there is a way to fix it without deleting files.
**PLEASE HELP ME FIX THIS!**
Details about the iMac:
iMac 21.5 Inch i think from Mid 2010,
OS X Lion installed maybe 10.7.2 or 10.7.3 (im not sure)

Brand New MBP Keyboard DOA/Any Fixes?/Return To Amazon or Call Apple?

I received a 2.4 GHz MBP yesterday. The internal keyboard crapped-out shortly after I began using it, within fifteen minutes or so... It took me a minute or two to realize that I couldn't type anything. Like others have reported external input devices work. The trackpad/button also function properly.
The computer arrived with the Pro Software Update 1.1 already installed, so that relatively easy fix is out.
I am in the process of upgrading the MBP to 10.5.5, etc. and see if that helps, but I doubt that it will. I have been unable to find any reliable fixes online. Anybody?
So do I contact Amazon or call Apple? I am at the Amazon page where you click "refund" or "return." I could really use a reliable Apple portable computer but this has really put me off... I opted for a previous-generation model for the matte screen and a keyboard that I prefer. I am well -aware of the Nvidia GPU woes but I thought that I could try to mitigate the heat issue and hope for the best. Now I'm not so sure.
All but one of my Macs going back to 1995 have had at least one hardware issue and the portables have had at least two major hardware issues. But this is the first brand-new Mac that has arrived in this condition.

Having dug a little deeper into the Amazon returns policy I came across this:
"All computers sold by Amazon.com are supported by the computer's manufacturers. In the unlikely event a computer appears to be defective, customers are directed to contact the customer support networks of the individual computer manufacturer to have it serviced under warranty."
I had read somewhere that Amazon accepts computer returns if they arrive "DOA" but then I got to thinking that DOA may not apply to this situation...
So I guess my next stop is Apple if it acts up again...

White screen on brand new MBP 13"

Similar Messages

Maybe you are looking for