White Screen on Curve 8520 when battery is fully or almost fully charged

Hello everyone,
This is my first post on Blackberry forums. My first Blackberry was a Curve 8310 and I recently obtained a Curve 8510. Beyond the trackball clogging/ replacement on the 8310, I had no issues at all. On the other hand, my 8520 continues to go "White Screen" even when the battery is charged. I notice it happens more when I am outside. I also experience very quick battery drains with no programs running in the background.
-2 different batteries tested with same problem.
-O/S installed and re-installed. Device wiped and re-installed again.
A battery pull will reboot but sometimes take a few attempts even when battery is 70% plus. I have read all the support forums and have not found a definitive answer or another Blackberry user with the same concern. Please help! Thanks in advance

Hello all again, Here is the answer to my own question regarding "White Screen on Blackberry Curve" It is the battery. I tried two different batteries; one was the original battery that came with the phone and the other came from my previous Blackberry Curve. Both batteries charged quickly and full but did not fully power the Curve which caused the White Screen when many applications were running, outside in the heat, or when the battery reached 70% or less. Bought an OEM Blackberry battery and the Curve 8520 has not had a problem since and the phone can go all day without a plug in or failure. White Screen = get a new battery. Hope this helps someone down the road.

Similar Messages

LCD white screen bb curve 8520

my BB cruve LCD white screen bb curve 8520 ????

Hi bluerain welcome to the Community
What is device OS version, is it the recent one? Have you recently updated your device ? If not try that if no updates are there than reload your Device OS.Have a look :
KB30280 : BlackBerry smartphone display blank white or black screen .
If it does not solves then it will wise to visit your Carrier for Replacing or Repairing.
Good Luck
Prince
Click " Like " if you want to Thank someone.
If Problem Resolves mark the post(s) as " Solution ", so that other can make use of it.
Click " Like " if you want to Thank someone.
If Problem Resolves mark the post(s) as " Solution ", so that other can make use of it.

White screen appeared twice now when Curve 8520 battery is low? (Please Help)

I'm really worried that my Blackberry is going to die ... I've only had it just over a year & I'm still paying for it, so for it to die on me would be truly upsetting!!
I've had the white screen twice now while my battery is low, I've seen a fix online about if you get the white screen & it won't come back on, but I don't know if that would be good for me to do, also can you please let me know before any fix if I will lose anything such as my BBM contacts for example!!!!!
Here's my device info as requested :
Your carrier: I'm not sure what this means but I'm on O2 in the UK (If this is what it means)
Model info and OS version (Go to Settings, then Options, then about), showed me the following info :
BlackBerry® 8520
Smartphone (EDGE, Wi-Fi)
v5.0.0.681 (Platform 5.2.0.67)
Cryptographic Kernel v3.8.5.85
Branding Version: 1.0.125.652H
Micro Edition Configuration: CLDC-1.1
Micro Edition Profile: MIDP-2.1
Micro Edition JTWI Version: 1.0
Micro Edition Media Version: 1.1
Micro Edition PIM Version: 1.0
Micro Edition File Version: 1.0
Micro Edition Bluetooth Version: 1.1
Micro Edition Location Version: 1.0.1
Micro Edition Security and Trust Services (APDU) Version: 1.0
WLAN Version: 3.0.0.113
www.blackberry.com
Copyright © 1997-2010
Research In Motion Limited
Nuance VSuiteVersion: 3.2
V 3.2.33 (b3.5)
Device: BlackBerry 8520
Apps and free space : I don;t have many app's really, Facebook, Twitter, I have the bejewelled & Sims 3, a horoscope one, wrestling online & Bebuzz .. I think that's it really, free space not sure but I know that it's ok though.
I've done a battery pull each time the phone has done this ... & it's just re-booted the phone fine, but the fact the white screen issue has happened to me twice now in the past few days is worrying, it's always when the battery is low .... I've noticed the battery seems to charge up quite quickly too ... not sure whether that means anything.
Please kindly help as soon as you possibly can ... I want to fix this early on the best way I can with hopefully not losing anything either ... such a gutter!! :-(
THANK YOU TO WHOEVER KINDLY TAKES THE TIME OUT TO HElP ME HERE!!!

We can do a few things just in case your phone situation gets worse.
I highly recommend that you do a full backup of the data using the desktop manager.
If you need to install it on your computer, get it from:
http://us.blackberry.com/apps-software/desktop/desktop_pc.jsp
After that, install blackberry protect if you haven't done so already. make sure your online backup ran ok.
http://us.blackberry.com/apps-software/protect/
I then recommend that you reload your device software. here are the steps.
http://us.blackberry.com/support/installpc.jsp
I hope this helps.
Please click the Thumbs Up icon if this comment has helped you!
If your issue is resolved, please click the solution button on the resolution!
Every BlackBerry should have BlackBerry Protect, get it now! | Follow me on Twitter | Bring Back BBM Music!

HT4061 I have an iphone 5s, does not boot, blinking white screen with black logo, when trying itunes restore from mac and pc, error code 4013 which is usb error, any ideas?

I have an iphone 5s, does not boot, blinking white screen with black logo, when trying itunes restore from mac and pc, error code 4013 which is usb error, any ideas? Does a totally dead battery have that effect? I have had it plugged in to a computer overnight, but maybe does not charge when totally dead?
Please help, thanks in advance all1

Hi eggroll77,
Welcome to Apple Support Communities.
That alert codes does suggest there is a USB related issue. If you haven’t already, try the troubleshooting suggestions in the article linked below.
iOS: Restore errors 4005, 4013, and 4014
I hope this helps.
-Jason

White Screen which goes of when connected to laptop!

hi all,
My BB curve 8520 is stuck with a white screen and it only comes back to life when its connected to the laptop.
The solution posted in another thread was to use the APPLICATION LOADER WIZARD.
but i cant seem to do so. As the drop down "Connection" menu, is just blank.
When i doconnect it to the laptop- everything comes back to view and the battery life seems normal. everything functions well.
When i remove it and start to use it even for 5 mins- this MUCH HATED white screen appears again.
Ive read that its some sort of shorting behind the screen, that it may be a battery problem, and also one that says its a software problem.
Someone please help! Thanks so much.
Virik

Hi again, Rockmantis
I don't think so. The inverter is the piece of hardware that controls what is shown on the display. If this was bad, then there would be nothing on the display, even with shining light directly on it. But the backlight is what makes the image visible by lighting it up. With this bad, it can sometimes work and then sometimes not, as it is currently for you.
Best,
Adam
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution!" This will help the rest of the community with similar issues identify the verified solution and benefit from it.

White Screen - Blackberry Curve 9300

Hi, recently got a new blackberry curve ( 5months old ) just a few days ago, my trackpad started freezing and not working.I got my trackpad cleaned and it worked and kept freezing still, then yesterday my phone froze all together and when white screen, then red (led) light come on and then when. Phone then reset its self. This happended 4 times in one day. I looked online i reloded the software and started fresh and white screen still kept happening, so i then did a handhelp wipe and completely cleared the phone and it still keeps happening. Any ideas on what i can do to fix this problem?
Thanks!

basically now the phone don't turn on??
are you able to connect to PC?
You probably have to try and reload the OS

Recently when clicking on Safari, it refused to open saying there were some components damaged. It was suggested I backup, remove OSX and reinstall. Now all I get is white screen and apple logo when starting. What to do?l

I Have an iMac desktop purchased in 2010 with OS X 6.1.6 and Snow Leapard. Recently after starting up, I was not able to open Safari. I checked for updates and all was well. I tried again and got a message saying Safari could not be opened because some components were damaged. After using Disk utilities to try and repair, it was suggested I uninstall OS X and reinstall from the disk. I did not at the time because I wanted to backup some info to a USB drive. But now when I startup all I get is the white screen and Apple logo and the loading symbol. What happened and How can Imfix it? I am not very tech savvy and don't know where to turn!

Hi nancy mfromamity harbor,
Welcome to the Support Communities! It sounds like reinstalling the Snow Leopard operating system is your next step. This should not affect the documents and data that you currently have on your iMac. I'll include the information to show you how below.
Mac OS X 10.6: Reinstalling Mac OS X
http://support.apple.com/kb/PH6606
Under some circumstances, you may need to reinstall Mac OS X. You can reinstall Mac OS X while keeping your files and user settings intact.
Note:To reinstall Mac OS X from another computer on your network, see:
Using another computer’s DVD or CD drive
To reinstall Mac OS X:
Insert the Mac OS X installation disc and double-click the Install Mac OS X icon.
Follow the onscreen instructions. In the pane where you select a disk, select your current Mac OS X disk (in most cases, it will be the only one available).
If you want to control which parts of Mac OS X are installed, click Customize, and then select the parts you want to install.
To start the installation, click Install.
If you purchased a standalone version of Mac OS X, these installation instructions are in a PDF file located on the Mac OS X installation disc.
If you need to reinstall the version of Mac OS X that was on your computer when you purchased it, or if you need to restore all the software on your computer (including Apple software, third-party applications, and other printer drivers), refer to the documentation that came with your computer.
If you need to reinstall Mac OS X and you’ve been using Time Machine to back up your applications, files, and user settings, you can easily restore this information from your Time Machine backup disk after you’ve reinstalled Mac OS X.
Nancy, here is the contact information if you need technical assistance to get your iMac up and running.
Intel-based iMac - Contact Support - Apple Support
http://www.apple.com/support/imac/intel/contact/
Good luck!
- Judy

HDV crashes/comes up as white screen with only sound when exported.

Hi I have been searching all throughout the forums for an answer to my problem but seem to find no clear solution. I edit everything into an HDV1080i60 timeline in Final Cut Pro 5 and then I try to export, whenever I export with Quicktime Conversion, Final Cut Pro crashes midway through. When I export with Quicktime Movie at 1080i60, the file comes out but when played is a blank white screen with sound only.
Every export setting has failed EXCEPT Uncompressed 8 bit NTSC. The video does come out good but the file sizes are enormous because it is uncompressed.
Is there any solution to this problem, I don't understand why its happening now, about one month ago everything was working great. I have downgraded to quicktime 7.3.1 yet still no results.
Any help would be much appreciated.

something between then and now has thrown a large spanner in the works
the fact that Quicktime Player is not seeing the HDV codec and yet FCP is able to work in that codec is a clear indication of the issue
starting with the least extreme and easiest solutions:
Use Disk Utility app to repair permissions on your system disc, see if that helped
Create a new user account and see if it all works better in that new account
Boot from your OS install discs and use Disk Utility app to repair your system disc, see if that helped
Uninstall and then reinstall Final Cut Studio (repair permissions again after the reinstall)
... probably best solution though is a complete clean reinstall of both OS and applications
hope it helps
Andy

White screen for Curve 9330

Not sure what happened, but all of a sudden white screen. Still can get calls and receive calls, still able to sync to computer. Help?

Hi and welcome to the forums mcming!
A couple of places for you to visit: Blackberry 101 Tips & Tricks
Ouch. Sorry to hear that. Do you have any sort of error message? Have you tried a battery pull to reset the device? Post back and let us know (in detail) what you have tried and if there have been any changes to your device.
Have a look at this thread 9300 white screen and what the user tried to solve their issue. Sounds like it may be a hardware issue.
Happy to have you here!
IrwinII
Please remember to "Accept as Solution" the post which solved your thread. If I or someone else have helped you, please tell us you "Like" what we had to say at the bottom right of the post.

I get a white screen on my ipod when I play videos!

I downloaded Quicktime7 Pro, and I exported a video to make it formated for my ipod. The video downloaded to the ipod, but when i play it, all I get is a white screen, not even sound! Is there a way to fix this?

Hi, it looks you can't properly export video via QuickTime. You mentioned you don't get icons on Desktop. Can you check the size of exported file? Few kilobytes instead of megabytes can be one of signs of something went wrong when exporting. My advise is to remove QuickTime from your system at all and then reinstall it from stand-alone distribution. You can find stand-alone installers on QuickTime download page.
All the best

White screen with vertical lines when opening.

My laptop has recently started showing a white screen with different colored vertical lines across it when opening the lid. It doesn't happen all the time but often enough to be concerning. If you close the lid and open again 95% of the time everything is good - with another try or two we can always get it back. There aren't any flickers or anything like that while using it. It sounds to me like a potential connection or short in the wiring. Am I on the right track? Thanks Donny

well i went to the apple store and went to the genius bar, they didn't tell me what caused my problem or what happened but they replaced my iphone! hopefully this doesn't happen again

Mbpr won't boot up, stuck on white screen with apple logo when I turn it on

This morning I noticed the apple logo on the outer shell of my mac was lit up, I thought this was very odd because the lid was closed and like all laptops when thier lids are shut the display ect. are supposed to switch off/go to standby?
Anyway I quickly opened the lid of my laptop to find that iconic white boot up screen with the grey apple logo and the small spinning loading circle under it
I've waited nearly 5 hours and tried multiple thing like booting up in safe mode, single user mode, and evan reinstalling OS X mavericks somebody help me please

Read this article... It recommended something you did already but there are other troubleshooting tips I'm not sure you've tried.
http://support.apple.com/kb/TS2570
If none works, then a trip to the Apple Store is needed. It's most likely a hardware issue that you yourself cannot resolve.

White Screen on Qosmio G10 when starting

I have an old Qosmio G10 which I bought from a licensed dealer in Beijing about 2 years ago.
After about a year of use at home I discovered that the screen would sometimes turn white when the screen was moved or shaking.
Some days it would work perfectly fine others it wouldnt even start up without going white.
Towards the end the screen would only show a picture when the screen was put in a certain angle.
Now, the screen just goes white the second I turn it on.
Am I looking at a hardware problem here or have there been known to be software problems with some of the similar laptops?
Thanks,
T

Hi buddy,
sounds like the display cable is maybe loose. I would point on a hardware problem, but before sending your machine to an authorized service partner, go to an local computer technician and let him check the cables on the display.
If realigning of the cables does not help then your display is defective and needs to be replaced by an authorized service partner. I dont know how long your warranty is, but if you want anyways send your machine to an service partner, you should visit the following link to find the nearest one in your country:
http://eu.computers.toshiba-europe.com/cgi-bin/ToshibaCSG/generic_content.jsp?service=EU&ID=ASP_SUPPORT

White screen in the itunes when ipad is connected to mac

Look at http://monosnap.com/image/YwTfnu7nzqORc3dJ4Fct6wVaA
What is the problem?

solved) itunes didn't show errors for current language, so after changing we saw an error that sim card was locked

Mac falls asleep when battery gets down to roughly, half charged

it falls asleep once it gets to this point, and then i wake it up and the charge has gone right down.
Does it need to be calibrated? or is the problem bigger than that?

Most likely you need a replacement. There are known issues with MBP batteries, and an extension of the battery warranty to 2 years, as described on this page:
http://www.apple.com/support/macbook_macbookpro/batteryupdate/
Go to System Profiler (Apple menu > About this mac > More info) and click on Power. If the Full Charge Capacity is less than 4400 mAh for a 15" or less than 5000 mAh for a 17" MBP, your battery is failing. If your Cycle Count is less than 300, your battery is failing prematurely and Apple will replace it for free. If that's the case, call Apple or visit an Apple Store for a free replacement.

White Screen on Curve 8520 when battery is fully or almost fully charged

Similar Messages

Maybe you are looking for