White Screen = PC's blue screen of death?

My MacBook Air is acting unusual. Several times it will have a white screen with a blinking a file folder. In the folder there is a question mark. What does this mean? When this appears my Air freezes and has to be rebooted.
Is this a serious problem? How do I fix it or do I have to take it in to a repair service?

Greetings JSam35,
I understand your Mac is experiencing a white screen with flashing folder icon. I have linked to an article which provides more information about the screen you're seeing. I have also provided a link to help you find service options:
A flashing question mark or globe appears when you start your Mac - Apple Support
Service information:
Apple - Support - Service Answer Center
Thank you for contributing to Apple Support Communities.
Best,
Bobby_D

Similar Messages

  • Ibook G4 freezes either when its on the grey loading screen or the blue screen. Sometimes I get it to my desktop but it always freezes in like a minute. Someone help I really need this computer!

         I have tried everything online and my iBook g4 wont stop freezing. Safe Mode doesnt even help, it still gets stuck on the blue screen! It either gets stuck on the grey loading screen or the blue screen. Rarely I am able to boot past everything and get to my desktop but after about 30 seconds it freezes again. This laptop was passed down to me and I have no original papers or disks that came with this laptop. I am really trying to figure this out without buying a disk because if it doesnt work I wont be out $60. Someone help I have tried putting it in safe mode single mode holding c down during start up! I need more options..  Please this is the only computer I have right now! (PS: I know warranty has expired a long long time ago)

    Hello,
    Some information you may or may not have read.
    Troubleshooting portables that won't turn on or start up
    http://support.apple.com/kb/TA25686?viewlocale=en_US
    Troubleshooting: My computer won't turn on
    http://support.apple.com/kb/TS1367
    Without the disk you are limited on options. It could be an issue with the hard drive and would required the disk to run disk utility.

  • I have a PB G4 that won't start. It shows the gray apple screen, shows the blue screen, and then the screen goes black, and "sleep" light pulses.

    I have a PB G4 that won't start. It shows the gray apple screen, shows the blue screen, and then goes black. The sleep light pulses. From there, I can't turn it off normally. I have tried restarting the PMU. And I have tried unplugging the ac adaptor and removing the battery. From there I have plugged only the ac adaptor in, and it will begin to start but do the same thing once it shows the blue screen.
    I tried only using the battery (without plugging in the ac adaptor) and the same thing happens. I tried starting the computer while holding down CTRL, Option, P, and R, waiting to hear the start up chimes 3 times, and then holding Shift as it starts up. But I still get the black screen once I see the blue one, and the computer's sleep light pulses.
    I need something very important from this computer. And was able to start it last night. I did not shut down the computer, and was going to take it to a friends to use his printer today. The computer was in sleep mode in the morning.
    Thanks for any help!
    Gina

    What your describing could be a logic board or memory issue. 
    You did or did not hear 3 startup chimes?  If you hear 3 chimes when you start it, that would indicate a memory problem.  Try reseating the memory to see if that makes a difference. If you have 2 RAM cards, try one then the other in each slot. If you have 1 RAM card, move it to the other slot. Powerbooks can develop one bad slot.
    You may need to pull the hard drive out of the Powerbook, put it into an external case, then read it from another mac.

  • Screen fades to blue screen continually (video attached)

    Here is what is going on. On boot the computer would lock up after the spinning gear. Or it seem to. It would get past the apple logo, flash pink for a second and go to a white screen. I could hear the hard drives being accessed but it never seemed to come out of this white screen after waiting 10 or minutes. So I ran the hardware test on this computer. It found no problems, so rebooted and oddly enough I the computer booted fine. However occasionally after being logged in the computer would flash to a blue screen and fade back in. This is the same animation you see when you log into your machine right before you see the desktop. In some cases it will continue over and over (see the youtube link bellow). Even booting off the original restore disc this issue kept continuing. Which leads me to believe its a hardware issue. Ive tried, resting the PRAM, SMC, ran the hardware test a second time, ran a check on the hard drive using disk utility, fixed the permissions, swapped out dvi cables, and changed out the power strip. I am leaning towards it being a video card issue, but i cant be for sure. The problem is intermittent, so its hard to track down. Has anyone seen an issue like this before?????
    http://www.youtube.com/watch?v=jtN6pU0eW5A
    Computer specs:
    Model Name: Mac Pro
    Model Identifier: MacPro1,1
    Processor Name: Dual-Core Intel Xeon
    Processor Speed: 2.66 GHz
    Number Of Processors: 2
    Total Number Of Cores: 4
    Memory: 5 GB
    Chipset Model: NVIDIA GeForce 7300 GT
    PCI-E audio card: http://www.motu.com/products/pciaudio/2408/

    Have you figured out the solution for this? I'm experiencing the same problem with almost the same setup.
      Model Name:          Mac Pro
      Model Identifier:          MacPro3,1
      Processor Name:          Quad-Core Intel Xeon
      Processor Speed:          3.2 GHz
      Number Of Processors:          2
      Total Number Of Cores:          8
      Chipset Model:          NVIDIA GeForce 8800 GT
      MOTU PCIe-424 2408mk3
    I've just recently upgraded to Snow Leopard 10.6.3, when this blue screen issue started to bug me. I tried resetting the
    RAMs and GFX card, but to no good result. I also tried to remove the PCIe-424 card, and found out that this causes to stuck the system in blue screen. I was wondering maybe MOTU has new released driver for OS X 10.6. I only downloaded the latest driver for mac which is for 10.4 and up. But whenever I'm plugging back the PCI card in, the blue screen problem still occurs and cannot continue with the installation procedure anymore.
    Hope someone could give me idea on any solution for this.

  • Dv6 Notebook "Black Screen" following "Windows Blue Screen" error message. Caps Lock blinking!

    I have a HP DV6 notebook. I left my computer on overnight and the next morning I woke up to find a Windows Blue Screen error message. It said to restart my computer. I was in a rush so I just closed the lid. When I returned I opened the lid and the screen was black. I pressed the power button to restart it and I haven't been able to restart it since. I now have a power light, a black screen and the CAPS LOCK light is blinking twice then a pause! Please help!

    Hi btgclark,
    I understand that you are having an issue with turning on your notebook and the CAPS LOCK light blinks twice and then pauses. The following document 'Computer Does Not Start and the LEDs Blink or the Computer Beeps' will walk you through the steps that you need to follow. For your error code, it means that the BIOS has a corruption failure. This document will walk you through the necessary steps to get this resolved.
    If for some reason this document does not resolve the issue please provide me with the model number to your notebook. I have included a document 'How Do I Find My Model Number or Product Number?'
    Please let me know how this works out for you, thank you.
    I worked on behalf of HP

  • Start up issue - Fuzzy grey screen & lines on blue screen

    Hi
    I have an issue where my Mac has recently had problems with starting up. I get the grey 'Apple' screen with lots of fuzzy lines. Sometimes it will progress to a login screen & sometimes will go to a plain blue screen with lines on it. It will always take 4-5 bootups before I can actually login to any user. Occassionally, once logged in, it will hang & need rebooting. Restarts seem to boot up okay without the fuzzy 'Apple' screen.
    Is there a known virus/software/OS or harware issue that can cause this kind of problem?
    Am waiting on anti-virus software so have no yet run a virus scan.
    Regards
    Kevin, UK
    G5 1.8Ghz 20" iMac   Mac OS X (10.4.3)  

    Hi ukbuzz
    I'm not an iMac owner, but I note that there has been some discussion on the iMac boards about similar problems to yours. I suggest you repost your question to that board.
    I hope your problem gets solved without too much hassle
    Bob

  • Imac's screen turn into blue screen

    I bought my iMac @ July 2008, the imac running just fine.....but some how since last month, my mac will suddenly turn into blue screen for couple seconds then turn it back to normal ....
    I tried to format the iMac , Blue screen problem still access .....
    Can some one tell me what should I do to fix this problem ???

    HI Brian and Welcome to Apple Discussions ...
    You tried to reformat the iMac without success? Did you boot from the restore disk and verify the disk for errors first? If not...
    Restart your Mac while holding down the C key, pressing the power button and inserting your restore disk all at the same time. An Installer window will open, but do not proceed with any installations. Instead, from the Menu Bar, select Utilities > Disk Utility. In the Disk Utility window click First Aid, and then click Verify. If Disk Utility reports errors, click Repair. When Disk Utility is finished, from the Menu Bar, select Utilities/Startup Disk. Select MacintoshHD 10.x.x and click Restart.
    To check your hard disk’s S.M.A.R.T. status: Open Disk Utility, in the Utilities folder in the Applications folder.Select the disk in the list at the left, and look at the bottom of the window for a field named “S.M.A.R.T. Status.” Make certain it says; Verified If not, there's a problem with the boot disk.
    If Disk Utility reports errors it cannot fix, you have several options. You can get DiskWarrior or TechToolPro to repair the directory. The other option is to locate an Apple store or an Apple certified repair shop.
    You can also use Disk Utility to check to see how much free space there is. Select MacintoshHD 10.x.x on the left of the window, then look at the bottom of the DU window. The Capacity and Available disk space will be displayed there. Never allow the free disk space to fall below 10%, 15% is better. Insufficient available space, can cause performance issues, system corruption, and possible loss of data.
    Carolyn

  • Desktop Screen Flashes Between Blue Screen and Desktop Screen

    The blue screen and desktop keep on flashing and I can't go on the internet. There's not taskbar and the internet explorer on the bottom dont show and I cant access the internet. Please help me find a solution. My warranty expired. The  internet modem was just upgraded and I have reserved for Windows 10 to be installed on the  background when its ready as the Microsoft email says on my email. Sincerely, Fred

    Hi @bdfloyd ,
    The unfortunate thing is I can not answer a Microsoft practice or when they will remove something.
    Sorry.
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping!

  • Start Up problems, I'm past the grey screen now at blue screen with spinning gears.

    Hello I'm working on my Mothers I Mac I believe its a G5,, I do see IMAC 8.1.  Today when she turned it on all that came up is a gray screen with a spinning gear. I tried Disk Utility but the HD wasn't being recognized.  After a few more trial and errors I finally reset the SMU, Which when I ran disk utility again the hard drive was recognized. I verified it and it said HD seems to be ok.  I restarted and sure enough I made it past the gray screen but now Its stuck on a blue screen with a spinning gear.  It looks almost like the login screen is trying to load but never comes up.  Every 10-20 sec it flickers and the gear just keeps spinning. The fan was never coming on, not until I reset the SMU so I'm currently letting it cool down. Hoping this helps.  Should I run the disk utility again and click the repair hd, even though no errors were listed when I verified it.

    An iMac 8,1 is an Intel model. Are you sure it's a G5 (not an Intel model?)
    Perhaps you should try reinstalling OS X:
    How to Perform an Archive and Install
    An Archive and Install will NOT erase your hard drive, but you must have sufficient free space for a second OS X installation which could be from 3-9 GBs depending upon the version of OS X and selected installation options. The free space requirement is over and above normal free space requirements which should be at least 6-10 GBs. Read all the linked references carefully before proceeding.
    1. Be sure to use Disk Utility first to repair the disk before performing the Archive and Install.
    Repairing the Hard Drive and Permissions
    Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Installer menu (Utilities menu for Tiger, Leopard or Snow Leopard.) After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer. Now restart normally.
    If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
    2. Do not proceed with an Archive and Install if DU reports errors it cannot fix. In that case use Disk Warrior and/or TechTool Pro to repair the hard drive. If neither can repair the drive, then you will have to erase the drive and reinstall from scratch.
    3. Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. When you reach the screen to select a destination drive click once on the destination drive then click on the Option button. Select the Archive and Install option. You have an option to preserve users and network preferences. Only select this option if you are sure you have no corrupted files in your user accounts. Otherwise leave this option unchecked. Click on the OK button and continue with the OS X Installation.
    4. Upon completion of the Archive and Install you will have a Previous System Folder in the root directory. You should retain the PSF until you are sure you do not need to manually transfer any items from the PSF to your newly installed system.
    5. After moving any items you want to keep from the PSF you should delete it. You can back it up if you prefer, but you must delete it from the hard drive.
    6. You can now download a Combo Updater directly from Apple's download site to update your new system to the desired version as well as install any security or other updates. You can also do this using Software Update.

  • I have 12,000 photos on iphoto and my macbook pro won't turn on...gray screen goes to blue screen and that is it...HELP

    I have 12,000 photos on iphoto and my macbook pro won't turn on...gray screen turns blue and that is it.  HELP!!

    Run through this list of fixes
    Step by Step to fix your Mac
    You can do this to copy and remove files from the non booting internal
    Create a data recovery/undelete external boot drive

  • Mac can't start up, either stays on the apple loading screen, or the blue screen

    I have a macbook pro running OS X 10.6.1 It was working fine an hour ago, It ran out of battery power, so I plugged it in and turned it on, now it wont boot up. What can I do to fix this?

    I've tried both turning in off and on again, and holding shift to start in safe mode, but it got stuck on load up then too

  • 10.6.2 Died - Blue screen of death for Snow Leopard?

    OK. I upgraded Tiger via the SL Boxed Set yesterday. The install went pretty flawless - no hiccups or issues at all. It is a clean install. I had cloned Tiger to an external USB drive - that's why I'm able to type this message now. I upgraded to 10.6.2 this morning and still everything seemed fine.
    I had the migration pretty much complete. I was getting used to some of the new features, I had moved/installed everything, etc. I have played games, used mail, internet, photo software, etc. with no problems. Today while using the computer, I noticed I would attempt to start a program, but the icon would just bounce in the dock and would not open. The programs that were already open were working fine - Safari, Apple Mail, and Google SketchUp. So, I finished up what I was doing and restarted my computer. That restart was the last time I ever saw the 10.6.2 desktop.
    Upon reboot, I get the Apple logo with gray screen, then the blue screen, then it freezes. I disconnected all connected devices (USB/Firewire, etc.) and unplugged for 30 minutes - no luck. Booted from the SL CD and ran Disk Utility. Disk Utility found no errors and said all was great! I verified the disk and repaired it even though it said it didn't need it. Still no luck. Just the blue screen of death.
    Any ideas where to go from here? I can boot via my USB external drive with 10.4.11, but that doesn't really correlate to my problem. I REALLY don't want to have to reinstall everything all over again - it took me ALL DAY to get it all moved over and I still have some to do. Thanks for any tips or tricks.
    Model Name: iMac
    Model Identifier: iMac5,1
    Processor Name: Intel Core 2 Duo
    Processor Speed: 2.16 GHz
    Number Of Processors: 1
    Total Number Of Cores: 2
    L2 Cache (per processor): 4 MB
    Memory: 3 GB
    Bus Speed: 667 MHz
    Boot ROM Version: IM51.0090.B09
    SMC Version: 1.9f4

    moze229 wrote:
    I suppose the new install just wrote over all the files, and it appears to have left all of my settings in tact. Now, if I just knew which one or few files was the problem, I'd be really satisfied.
    It might help to understand that the procedure affects primarily OS files, for instance by replacing the existing copies of the binaries the OS contains with fresh ones from the installer disc. It does not affect user created files & settings at all, except possibly for some system-wide settings that might have become corrupt. It won't affect third party items either, except that it may move a few of them known to be incompatible with Snow Leopard in a root level "Incompatible Software" folder, as explained in Mac OS X v10.6: About incompatible software.
    So, the most likely cause of your problem was a damaged or missing OS domain file that the installer replaced. How the file got damaged or which one(s) were involved is hard to say. Some third party software can do this, especially hacks & so-called system enhancements that ignore Apple's Developer Guidelines for appropriate entry points into the OS. Improper shutdown, like from a sudden loss of power, can sometimes do it. User error may be involved, especially if you use the Terminal to modify system files & settings or otherwise make changes to the root level folders normally managed by the OS (/System, /Library, & the ones not normally visible from the Finder).

  • Blue Screen of Death Please Help!!!

    Hi Everyone. I'm having some major issues with my iPhone 5s (16GB updated to iOS 8.1.1). Literally every time I so much as look at the phone it restarts and gives me the Blue Screen of Death. This happens randomly. At one time it was just a minor annoyance (as it only happen occasionally), but now it is unbearable. My phone is on a constant cycle of Black Screen, Apple Screen, and then Blue Screen.
    Before you ask, yes I have reset all of the settings, yes I have tried holding down the home button and the lock button, and yes I have tried wiping my entire phone (in the past) to get rid of this problem.
    Please help! Nothing I have done or tried to do is fixing this problem.
    Thank you so much in advanced.

    If you have restored the device as new and tested it without using your backup and it is still malfunctioning, then you need to make an appointment with the Genius Bar of the nearest Apple Store or Authorized Apple Service provider, depending on your location, and have the hardware checked.

  • Windows 7 Blue Screen of Death from Apple Wireless Keyboard?

    I've installed Windows 7 with Boot Camp 3.0 drivers on my Mac mini, and I suppose overall, I'm enjoying it. However, I'm getting a blue screen that seems almost random. Keyword is almost.
    I've got my Apple Wireless Keyboard and Mighty Mouse paired, and they're both working well, however, I do believe I am getting some blue screens from my wireless keyboard.
    It seems, at random intervals (usually when I haven't touched the keyboard and mouse for awhile) I get an IRQL blue screen and no information about what's exactly causing it. For example, if I'm sitting in the other room listening to music for awhile, and I come back and press the "next" media button on my keyboard, it'll crash and give me the blue screen. However, I've also tried pressing another random button (shift) to "wake" the keyboard if it had fallen asleep, which also results in a blue screen. The blue screens ONLY show up when I give input via the wireless keyboard. Or, if I leave the computer on overnight to download a file or something, the screen will sleep (which it should) then I'll press a button on the keyboard, the screen will stay asleep, and the computer will restart. Which is just a hidden blue screen I'm assuming.
    I've tried reinstalling Windows (Clean/fresh install of course), installing/uninstalling drivers, pairing and re-pairing. I've also removed unnecessary/non-Windows 7 drivers that were installed with Boot Camp.
    Outside of this blue screen, I am quite impressed with Windows 7. I just can't figure out what's going on. Is there any place I can get a description of what's causing this crash? Does anyone know what's happening or know a solution to this?
    Thanks in advance, if you need more details, please ask.

    Experiencing exactly the same symptoms, bugcheck/bluescreen only when touching the Apple wireless keyboard after a period of inactivity.
    I have an 20" iMac, just upgraded Leopard -> Snow Leopard latest minor version and updated to Boot Camp 3.1 hoping they provided a fix, but the driver at fault (keymagic.sys) doesn't look updated and the issue is still there
    Hopefully someone from Apple dev support is reading this, here's all the info I could squeeze from the crash dump:
    =============================================
    * Bugcheck Analysis *
    IRQLNOT_LESS_OREQUAL (a)
    An attempt was made to access a pageable (or completely invalid) address at an
    interrupt request level (IRQL) that is too high. This is usually
    caused by drivers using improper addresses.
    If a kernel debugger is available get the stack backtrace.
    Arguments:
    Arg1: fffff80002e33440, memory referenced
    Arg2: 0000000000000002, IRQL
    Arg3: 0000000000000008, bitfield :
    bit 0 : value 0 = read operation, 1 = write operation
    bit 3 : value 0 = not an execute operation, 1 = execute operation (only on chips which support this level of status)
    Arg4: fffff80002e33440, address which referenced memory
    Debugging Details:
    READ_ADDRESS: fffff80002e33440
    CURRENT_IRQL: 2
    FAULTING_IP:
    nt!IoIsWdmVersionAvailable+0
    fffff800`02e33440 80f906 cmp cl,6
    CUSTOMERCRASHCOUNT: 1
    DEFAULTBUCKETID: VISTADRIVERFAULT
    BUGCHECK_STR: 0xA
    PROCESS_NAME: System
    TRAP_FRAME: fffff88002f2f0c0 -- (.trap 0xfffff88002f2f0c0)
    NOTE: The trap frame does not contain all registers.
    Some register values may be zeroed or incorrect.
    rax=fffff88002f2f100 rbx=0000000000000000 rcx=0000000000000006
    rdx=0000000000000000 rsi=0000000000000000 rdi=0000000000000000
    rip=fffff80002e33440 rsp=fffff88002f2f258 rbp=fffff88002f2f2b0
    r8=fffff80002a4f000 r9=0000000000000000 r10=fffffa80027f3010
    r11=fffff88002f2f208 r12=0000000000000000 r13=0000000000000000
    r14=0000000000000000 r15=0000000000000000
    iopl=0 nv up ei pl zr na po nc
    nt!IoIsWdmVersionAvailable:
    fffff800`02e33440 80f906 cmp cl,6
    Resetting default scope
    LASTCONTROLTRANSFER: from fffff80002ac0469 to fffff80002ac0f00
    FAILEDINSTRUCTIONADDRESS:
    nt!IoIsWdmVersionAvailable+0
    fffff800`02e33440 80f906 cmp cl,6
    STACK_TEXT:
    fffff880`02f2ef78 fffff800`02ac0469 : 00000000`0000000a fffff800`02e33440 00000000`00000002 00000000`00000008 : nt!KeBugCheckEx
    fffff880`02f2ef80 fffff800`02abf0e0 : 00000000`00000000 fffffa80`03375d90 00000000`00000000 00000000`00000000 : nt!KiBugCheckDispatch+0x69
    fffff880`02f2f0c0 fffff800`02e33440 : fffff880`04a02e5d fffffa80`02a3add0 fffffa80`027e8b40 fffffa80`02a3add0 : nt!KiPageFault+0x260
    fffff880`02f2f258 fffff880`04a02e5d : fffffa80`02a3add0 fffffa80`027e8b40 fffffa80`02a3add0 0000057f`fd5c5228 : nt!IoIsWdmVersionAvailable
    fffff880`02f2f260 fffffa80`02a3add0 : fffffa80`027e8b40 fffffa80`02a3add0 0000057f`fd5c5228 fffff880`04a02dfc : KeyMagic+0x2e5d
    fffff880`02f2f268 fffffa80`027e8b40 : fffffa80`02a3add0 0000057f`fd5c5228 fffff880`04a02dfc fffff880`00e5a2a7 : 0xfffffa80`02a3add0
    fffff880`02f2f270 fffffa80`02a3add0 : 0000057f`fd5c5228 fffff880`04a02dfc fffff880`00e5a2a7 fffffa80`02a3add0 : 0xfffffa80`027e8b40
    fffff880`02f2f278 0000057f`fd5c5228 : fffff880`04a02dfc fffff880`00e5a2a7 fffffa80`02a3add0 00000000`00000000 : 0xfffffa80`02a3add0
    fffff880`02f2f280 fffff880`04a02dfc : fffff880`00e5a2a7 fffffa80`02a3add0 00000000`00000000 fffffa80`027fd9d0 : 0x57f`fd5c5228
    fffff880`02f2f288 fffff880`00e5a2a7 : fffffa80`02a3add0 00000000`00000000 fffffa80`027fd9d0 00000000`00000010 : KeyMagic+0x2dfc
    fffff880`02f2f290 fffff880`00e30c9b : fffffa80`027fd9d0 fffffa80`027fd9d0 fffffa80`027fd9e0 fffffa80`027fdc01 : Wdf01000!FxRequestBase::CompleteSubmitted+0x1f3
    fffff880`02f2f310 fffff880`00e30dc4 : 00000000`00000002 fffff880`04bbcff7 00000000`00000000 fffff880`04bbcff7 : Wdf01000!FxIoTarget::RequestCompletionRoutine+0x1cb
    fffff880`02f2f380 fffff800`02aab935 : 0d780da4`0da40dd4 fffff880`02f2f420 0d440d78`0d780da4 fffff880`04bbeb52 : Wdf01000!FxIoTarget::_RequestCompletionRoutine+0x3c
    fffff880`02f2f3b0 fffff800`02ac3516 : fffffa80`027e8f2b 00000000`00000000 fffffa80`027fdc70 fffffa80`027e8b40 : nt!IopUnloadSafeCompletion+0x55
    fffff880`02f2f3e0 fffff880`04b62323 : fffffa80`027e8b40 00000000`00000000 fffffa80`02655c10 00000000`00000000 : nt!IopfCompleteRequest+0x3a6
    fffff880`02f2f4c0 fffff880`04ba24be : fffff880`02f2f590 fffffa80`027e8b40 00000000`00000000 fffffa80`0294f600 : bthport!BthCompleteRequestEx+0x5b
    fffff880`02f2f4f0 fffff880`04b9c8d4 : 00000000`00000000 00000000`00000001 fffffa80`02a50c40 fffff880`02f2f6e0 : bthport!L2Cap_CompleteReadIrpList+0xc2
    fffff880`02f2f540 fffff880`04b70732 : fffffa80`03349530 fffffa80`0294f5f0 fffff880`00410001 00000005`00000002 : bthport!L2CapInt_ProcessReadBip+0x430
    fffff880`02f2f6d0 fffff880`04b70078 : fffffa80`0267f230 00000000`00000000 fffffa80`029b5402 fffffa80`02670000 : bthport!HCI_ProcessAclReadBip+0x642
    fffff880`02f2f7a0 fffff880`04b988d9 : fffffa80`0267f230 fffffa80`03036702 fffffa80`026c0ab0 00000000`00000000 : bthport!HCI_ProcessAclRead+0x214
    fffff880`02f2f810 fffff880`04b66201 : 00000000`00000000 00000000`00000000 00000000`00000056 fffffa80`026c0ab0 : bthport!HCI_ProcessMpBip+0x61
    fffff880`02f2f880 fffff880`04b4d327 : fffffa80`0294f4f0 fffffa80`026c0ab0 00000000`00000000 fffff800`02ac59fa : bthport!BTHPORT_RecvMpBip+0x41
    fffff880`02f2f8d0 fffff880`04b5399f : 00000000`00000000 fffffa80`00cd3910 fffff880`04b56388 fffffa80`00cda820 : BTHUSB!BthUsb_ReadTransferComplete+0xf7
    fffff880`02f2f930 fffff880`04b53c31 : 00000000`00000003 fffff880`02f2f9f0 fffffa80`00ca2d00 fffffa80`00000012 : BTHUSB!UsbWrapWorkRoutine+0x17b
    fffff880`02f2f9b0 fffff800`02ac3516 : fffffa80`00cd3bdb 00000000`00000000 00000000`00000000 00000000`00000000 : BTHUSB!UsbWrapInterruptReadComplete+0x1dd
    fffff880`02f2fa40 fffff880`044135d9 : fffffa80`01e81050 fffffa80`00cda700 00000000`00000000 00000000`00000000 : nt!IopfCompleteRequest+0x3a6
    fffff880`02f2fb20 fffff880`04413ab7 : fffffa80`028ef502 fffffa80`00cd3910 00000000`ffffffff fffffa80`01e81ea8 : USBPORT!USBPORTCoreiCompleteDoneTransfer+0xa15
    fffff880`02f2fc00 fffff880`0441164f : fffffa80`01e81ea8 fffffa80`01e811a0 fffffa80`01e82040 00000000`00000000 : USBPORT!USBPORTCoreiIrpCsqCompleteDoneTransfer+0x3a7
    fffff880`02f2fc60 fffff880`04402f89 : fffffa80`01e81050 00000000`00000000 fffffa80`01e81e02 fffffa80`01e81ea8 : USBPORT!USBPORTCore_UsbIocDpcWorker+0xf3
    fffff880`02f2fca0 fffff800`02acc5dc : fffff880`02f07180 fffffa80`01e81ea8 fffffa80`01e81ec0 00000000`00000000 : USBPORT!USBPORTXdpcWorker+0x1d9
    fffff880`02f2fcd0 fffff800`02ac96fa : fffff880`02f07180 fffff880`02f11f40 00000000`00000000 fffff880`04402db0 : nt!KiRetireDpcList+0x1bc
    fffff880`02f2fd80 00000000`00000000 : fffff880`02f30000 fffff880`02f2a000 fffff880`02f2fd40 00000000`00000000 : nt!KiIdleLoop+0x5a
    STACK_COMMAND: kb
    FOLLOWUP_IP:
    KeyMagic+2e5d
    fffff880`04a02e5d ?? ???
    SYMBOLSTACKINDEX: 4
    SYMBOL_NAME: KeyMagic+2e5d
    FOLLOWUP_NAME: MachineOwner
    MODULE_NAME: KeyMagic
    IMAGE_NAME: KeyMagic.sys
    DEBUGFLR_IMAGETIMESTAMP: 49c160ec
    FAILUREBUCKETID: X640xA_CODE_AV_BAD_IPKeyMagic+2e5d
    BUCKET_ID: X640xA_CODE_AV_BAD_IPKeyMagic+2e5d
    Followup: MachineOwner
    ---------

  • Can't get past the blue screen of death

    I woke up this morning to discover my computer froze on the screensaver sometime last night. I restarted and after the grey apple screen got a blue screen which shifted to a lighter blue screen with the mouse cursor and it never moves beyond that. My Applecare expired in July. Here's everything I've tried:
    -I was running Leopard, so put my Leopard disc in to startup from it and run Disc Doctor, it weirdly spits it out, while I'm holding 'C' and right about the time it should startup from it.
    -I zapped the PRAM
    -I reset the SMU
    -I tried running tech tools from the Apple Care Disc, it spits that one out too
    -I restarted in 'single user mode', ran fsck and it corrected a couple things but no change
    -I put in the Tiger Install Disc that came with the computer, I'm able to startup from that and I go ahead and run disc doctor. nothin
    -I run hardware test, the extended version, everything passes, calming my fears about the logicboard, video card, etc
    -I restarted from the Install Disc and perform an Archive and Install of Tiger. It all goes smoothly, except now it goes from the grey apple screen and freezes at the first blue screen, not making it to the lighter one with a cursor.
    -I retry using the Apple Care Disc with Tech Tools and instead of spitting it out, it takes a really long time to load and come up with 2 blue squares overlapping on a black background, a Tech Tools Glow Plugin finder window comes up in one of them and then everything freezes with weird red pixels across the top of the finder window. ODD
    -NEW EVENT, it can boot in Safe Mode in Tiger. What should I do from there?
    Any help would be greatly appreciated.

    It reads the disc when I have it running in Tiger Safe Mode, but won't startup from it. It no longer spits it out, but the disc spins and spins and the fan runs hardcore for a few mins and nothing beyond the blue screen.
    I do have another Mac, but its an older powerbook from work and I can't really do much on it. The powers that be control pretty much everything on it.
    In theory, would a clean install (from my Tiger disc) take care of this all? I'm considering getting another external harddrive to backup everything and then just whiping the harddrive and starting over.

Maybe you are looking for