White screen randomly after upgrade ios5

Hi everyone..last night i updated ios 5 and my iphone white screen randomly appear.
i alreday restore my iphone but didn't solved the problem. it solved when i lock and unlock my iphone for several times but will shown again randomly.
need your advice it is hardware it is hardware problem or software problem because shown after i upgrade to ios 5.Thanks

What do you see on the iPod screen, when you plug in to the PC?
My suggestions,
Charge only using High Power USB2.0 port at the back of your PC and not the low power USB 1.1 port at the front of the PC.
Change the USB cable, (maybe it is broken)
Try a wall charger.
Have a nice day!

Similar Messages

  • Iphone 5s Hangs randomly after upgrading to IOS 8

    I am bit worried about IOS upgrade. I am using Iphone 5s since March 2014. Till date it was working fine. But when I upgraded my Iphone from IOS 7.1.2 to IOS 8 problem starts arriving.
    Symptoms :      1. The phone hangs randomly after upgrade.
                            2. After selecting any application , it disappear suddenly. I have to start the application again. This mostly happen when I select Setting icon
    This is very much embarrassing that I am using one of the best phone in the world and it hangs automatically when I need it most.
    The only resolution for hang phone is to reboot.
    I upgraded to latest IOS 8.0.2 but still no improvement. I am expecting Apple team to look into this issue and resolve it. Waiting for your response.

    I have 5 Iphone 5's and Ipad Air. All upgraded to ios8. Everyone locks! it is so locked you have to hold home button and power button serial times. It reboots and just shows apple. When you use Safari, or type a text message, they just get behind then lock up with half a screen or half the icons.
    All my kids hate their devices now. I know Apple will fix. It is scary as i have never seen iPhones actually lock up and un-usable. this should have been caught in Beta. Perhaps Apple should get some "Real" outside normal users to beta. The ones they are using are not catching this stuff. Code is complicated, Apple has the best minds, Just keep holding the Home button and power button. Eventually it will reboot. Then close all the open apps. and don't tilt the phone sideways.
    Also close all un-used webpages left open in safari. this seems to fix.
    As for the Bug about lagging while texting and half screen lock ups. that needs to be fixed ASAP.
    I know from building things, there is always a few hiccups. Yelling won't do anything, give Apple a chance to fix it. I love Apple, and will continue to purchase the items. The world economy is changing, suppliers are going green, thus you get cheap bendable parts too. Apple will find the middle ground and work the problem. Please all post they read these blogs.
    If Apple deletes your posts and denies these problems then email Tim Cook. He does listen. Give it a week then it will all be sorted out. If apple sold iPhone 6 pluses that bend, then i am sure they will offer a replacement. Apple does care, May seem arrogant but they always come through at the end.
    Hang in there, i always rush and put the update on the minute it comes out, over and over, then complain about the bugs. Better to wait a month. i am addicted to new and better and just click upgrade. My fault too. I know better after 37 years with apple.
    Kind Regards,
    B

  • On my 2012 MBP I can no longer use dual screens/HDMI after upgrading to 10.8.2. I'm using Moshi Thunderbolt adapter

    On my 2012 MBP I can no longer use dual screens/HDMI after upgrading to 10.8.2. I'm using Moshi Thunderbolt adapter

    I think you are sailing in uncharted waters with those kind of modifications.
    I am only guessing, but if you have not already done so,  do a PRAM reset and then trash your FCP preferences.
    Big Poppa Chris wrote:
    I've also notice when I start the computer up, it stays on the grey screen longer than it did when I had the original card (512 mb).
    My understanding is the Mac is doing a ram/hardware test during the grey screen, if the card you added had additional memory, then it is very likely the test will take longer - but I am no hardware expert.
    MtD

  • Screen distortion after upgrading to mavericks os

    I own a late 2011 MBP 13". Last week I upgraded to Mavericks and regret it ever since. Firstly, it's become unbelievably slow. Secondly, and most importantly my screen resolution is now distorted and completely messed up. Immediately I suspected if Mavericks had screwed some setting. So I looked up Google for screen distortion after upgrading to Mavericks. The results were surprising! There are many apple discussions going on about the same thing. After reading most of them, as suggested in almost all threads, I took my laptop to the service station. The initial response given to me was that they suspected a hardware issue. All threads had indicated what to expect so I was not surprised. I explained to them clearly that there are discussions revolving around this topic and many users have been affected because of this. I even showed / shared the links of the various discussions on this topic. The service station in India asked for more time to investigate further. In the mean time I contacted the Indian call centre to report this problem. The service station reverted after their investigation that my logic board was corrupted and needed replacement. Phew!!! The cost of replacement is as good as buying a new MBP. It's really amusing because my MBP is less that 2 years old and unfortunately I do not have extended warranty.
    Has anyone facing the same issue been able to convince apple that this is a mavericks issue? Does even apple recognize this as an issue in the first place? Does apple expect people to blindly invest in hardware just because they have released a new OS?
    These and many more questions....
    Expecting answers!!!
    Not a good start to 2014

    The startup disk may need repairing ...
    Restart your Mac while holding down the Command + R keys.
    From there you should be able to access the built in utilities in OS X Recovery

  • Just for the future on the ipad air there seems tp be a white screen glitch after  a certain amount of use. it would be great if this gets fixed. thanks

    Just for the future on the ipad air there seems to be a white screen glitch after a certain amount of use.  This needs to be fixed thanks

    You are not talking to Apple here. We are all users trying to help one another solve issues with their iPads.
    I have an iPad Air and have never experienced something that I would call a " white screen glitch."
    Please explain exactly what is happening on your iPad, what you might have tried to fix it and what, if any, error messages you receive.

  • IMobile App crashes after upgrading iOS5

    iMobile is the app for icici on-line Banking available in the App store. This app is really a very good and was working fine up to  iOS4. After upgrading iOS5 this app is no more working. when I launch this app, while entering the " Login Pin " it is getting crash every time.
    Please do the needful changes/correction.
    Thanks.

    You will need to contact the maker of the application. In the iTunes App Store, you will find a link for the developer and their support information.

  • My iPod has a white screen.  After holding down the middle and the menu button it goes black, then back white, and then beeps twice but stays white.  It never shows the apple logo, just stays white - help!

    My iPod has a white screen.  After holding down the middle and menu button, the screen goes black then back to white and beeps twice.  I have returned to original settings and resorted content to no avail.  I still have a white screen.  I have plugged it up and tried resetting again and again, still a white screen with two beeps - help.

    I have the same exact issue. Fifth generation iPod Nano, blank screen, Restore had no effect. I'm running Windows 7 Home, with all software up-to-date. I suspect hardware damage. Any clarification would be appreciated. Thank you in advance.

  • Hi guys i have an macbook 13 late 2007 and does not work when i start it up all u can see is blank white screen and after that its keep bepping high peech tone 3 times i was thinking the hard drive but im not too sure please guys help.

    Hi guys i have an macbook 13 late 2007 and does not work when i start it up all u can see is blank white screen and after that its keep bepping high peech tone 3 times i was thinking the hard drive but im not too sure please guys help.

    Try to reset the PRAM first then go from there.
    http://support.apple.com/kb/HT1379

  • My Macbook doesn't turn on, it just show a white screen and after a while a question mark blink, I cannot click the question mark, and cannot do anything. Any suggestions?

    Hi, my Macbook doesn't turn on, it just show a white screen and after a while a big question mark blinks but nothing else, cannot click the question mark, cannot do anything.Also it makes a funny noise.  Any suggestions?

    Suppose it's a HDD crash. Boot from Install DVD which came with your MacBook(Press C during startup) and open DiskUtility to repair your HDD if it's able to mount.

  • I switch on my iPod,apple logo comes and a white screen comes after the apple logo and it restarts again

    I switch on my iPod,apple logo comes and a white screen comes after the apple logo and it restarts again

    Try here:
    iPod touch: Hardware troubleshooting
    iPhone and iPod touch: Frozen and unresponsive
    You may have to let the battery fully drain and then charge and try again..

  • Sorry for my bad english. My ipod have a white screen and after few secondes somes lines appear

    Sorry for my bad english. My ipod have a white screen and after few secondes somes lines appear.

    - Try a reet:
    Reset iPod touch:  Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Next connect to computer and if it shows in iTunes restore the iPod.
    - If the screen is still white, let the battery fully drain and charge for an hour.
    - If still white screen it is time for an appointment at the Genius Bar of an Apple store.
    - If not, the try the reset and connect to iTunes and restore.  Also try placing the iPod in recovery mode and then restore. For recovery mode:
    iPhone and iPod touch: Unable to update or restore

  • I restored my ipod touch because it had a white screen but after it finished restoring the screen was still white what should i do?

    i restored my ipod touch because it had a white screen but after i restored it the screen was still white what should i do?

    Sounds like a hardware issue. Make an appointment at an Apple Store.

  • 3 GS freezes to white screen occasionally after hitting home button.  Has anyone ever experienced this?

    Has anyone ever experienced a white screen that freezes then turns black after hitting the home button?

    I have had intermittent white screens for some time (as in three years). It happens when the phone "wakes up". I hae lost calls that I could not answer because the screen was white. It has come up white when I hit the home screen. Not always, but with random frequency. All I have to do it hit the power button (I do not have to power off, just hit the button) and  reopen the phone and it is gone. I know the phone is functioning under this screen, I just cannot do anything.
    My first 3GS had the problem so severly I called Apple. After two and a half hours of resets of various kinds, they decided the phone was bad and sent my a replacement. It was better, but it still has the issue. I have gotteb used to it and am waiting until I can get an upgrade to the phone in the hopes it takes care of it. In the meantime, I occasionally doa search here and un the intertubes to see if someone else has the issue and a solution.
    My suspicion has been that some app I downloaded causes it, but I have deleted apps and cannot get rid of the issue.

  • White screen problem after updating to 1.1 firmware

    My 2G iPod Nano worked fine with 1.0.1 and 1.0.2 firmware but after updating to 1.1 I get white screen everytime I turn it on after longer period of time. Turning the iPod off and then right back on makes it work again. I have done restore 3 times without effect. I even removed the firmware files so that iTunes downloads them again when doing the restore but that didn't work either.
    Should I return it or wait for new firmware? Has anyone else had this problem after updating to 1.1?

    Disconnect iPod and close iTunes.
    Firmware files are in "Documents and Settings\username\Application Data\Apple Computer\iTunes\iPod Software Updates" folder.
    You should still have the 1.0.2 files named "iPod_19.1.0.2.ipsw" and "iPod_19.1.0.2.ipsw.signature" in there if have you upgraded from 1.0.1 version.
    Remove 1.1 files from the folder so that only those to files are in there.
    Disconnect from network (I switched off my wlan) so that iTunes can't download the new version. Connect your iPod and do Restore, iTunes will now use the old firmware files because it can't connect to the internet.
    Fujitsu Siemens Amilo M3438G   Windows XP  

  • 9850 White Screen during OS upgrade

    After losing power during a security wipe (long story) i've tried several methods to either reload the OS to my BlackBerry 9850 or just wipe it to start from scratch. In each instance, the device can boot to 3/4 of the white bar and then will go to a completely blank screen. This will stay indefinitely until power loss.
    1) through my Mac BBDM: when the OS is not detected, I try to upgrade and as the device is initializing, it goes to the white screen and the BBDM eventually says the upgrade was a failure.
    2) through mac Terminal: I've tried a factory reset through Terminal using the "./bbdm resettofactory". It gives me a message of "RIM Software" or something to that effect but doesn't seem to reset the device at all.
    3) through VirtualBox running windows: I've tried connecting my device this way and though the device appears on the VirtualBox software (it says a RIM Blackberry device is connected via USB), neither BBSAK or AppLoader.exe will detect the device to let me wipe it or go through the AppLoader process.
    Any ideas out there? I figure there's got to be a way to force detection such that I might wipe the device to a factory state so that I might then reload the OS.
    Device info
    Your carrier: It was bought from US Cellular but I am using it with a SIM card in the UK.
    Model info and OS version (Go to Settings, then Options, then about): OS 7.1
    Apps and free space
    Did a battery pull fix your issue? No.
    When writing your question
    Good description of what is really wrong and how to reproduce if possible. Details of what you did before: Again, I was trying a security wipe after some software issues made me want to start from scratch and the device lost power before the wipe was completed.

    Hello,
    Given all you describe, I do not think it can be recovered via a MAC. You will need a PC. After you've arranged such access, I recommend the following.
    1) Make sure you have a current and complete backup of your BB...you can find complete instructions via the link in my auto-sig below. This is likely moot in your situation.
    2) Uninstall, from your PC, any BB OS packages
    3) Make sure you have the BB Desktop Software already installed
    http://us.blackberry.com/software/desktop.html
    4) Download and install, to your PC, the BB OS package you desire:
    http://us.blackberry.com/support/downloads/download_sites.jsp
    It is sorted first by carrier -- so if all you want are the OS levels your carrier supports, your search will be quick. However, some carriers are much slower than others to release updates. To truly seek out the most up-to-date OS package for your BB, you must dig through and find all carriers that support your specific model BB, and then compare the OS levels that they support.
    5) Delete, on your PC, all copies of VENDOR.XML...there will be at least one, and perhaps 2, and they will be located in or similarly to (it changes based on your Windows version) these folders:
    C:\Program Files (x86)\Common Files\Research In Motion\AppLoader
    C:\Users\(your Windows UserName)\AppData\Roaming\Research In Motion\BlackBerry\Loader XML
    Now, try these tricks:
    KB10144 How to force the detection of the BlackBerry smartphone using Application Loader
    KB27956 How to recover a BlackBerry smartphone from any state
    http://crackberry.com/blackberry-101-lecture-12-how-reload-operating-system-nuked-blackberry
    If any suggest an Update Website, substitute please either the Desktop Software or LOADER.EXE.
    Good luck and let us know!
    Occam's Razor nearly always applies when troubleshooting technology issues!
    If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
    Join our BBM Channels
    BSCF General Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

Maybe you are looking for