White screen, showing a flashing file icon with question mark??

Having issues with the above, please help

Flashing ? mark means it can't find the Disk it thinks it's supposed to boot from, or the Disk is muxed badly.
If 10.7.0 or later...
Bootup holding CMD+r, or the Option/alt key to boot from the Restore partitirion & use Disk Utility from there.

Similar Messages

White screen with flashing file icon with question mark mean

What does this mean. We are getting a white screen with flashing file icon with question mark inside the file.

It almost certainly means it can't find a bootable volume (one with OS X on it).
Which means most likely you will have to find your original system installation DVD and install it. Then you should figure out what caused the problem.
Read this to diagnose it before resorting to reinstalling the OS:
http://support.apple.com/kb/TS1440
Excerpt:
Additional steps
If your Mac still starts to a flashing question mark, follow the steps below. If any step resolves the issue, you don't need to continue to the next one.
Select your Mac OS X startup disk with Startup Manager by restarting and holding the Option key. After your Mac starts up, restart again to verify that the flashing question mark does not appear.
If the issue persists, insert your Mac OS X installation disc. Be sure to either use the disc that came with your Mac, or, if you installed a later Mac OS X version from disc, use the newer disc.
MacBook Air note: On a MacBook Air, there are two options for starting up from Mac OS X media: Either connect a MacBook Air SuperDrive to the MacBook Air via the USB port and restart the computer, holding down the C key during startup, or use Remote Install Mac OS X to startup from a system software DVD that's located on a partner computer. Once started up from Mac OS X media, skip to step 3.
Restart the computer, then hold the C key during startup.
From the Utilities menu, choose Disk Utility. Don't click Continue.
Select your Mac OS X disk (named "Macintosh HD" by default) in the left side of the Disk Utility window.
Click the First Aid tab.
Click Repair Disk to verify and repair any issues with your Mac OS X startup disk.
After repairing the disk, try to start up normally.
Important: If Disk Utility finds issues it cannot repair, you may need to back up as much of your data as possible (or use Time Machine to back up to a different disk), then erase the disk and reinstall Mac OS X. You should back up important files and data before erasing a drive. Erasing deletes everything on the hard disk (including things on your desktop). Also, you can install Mac OS X onto an external disk, start from the external disk, and use Migration Assistant to transfer items from your usual internal Mac OS X startup disk to the external disk, then erase the internal disk and reinstall Mac OS X.
If the issue persists, and Disk Utility didn't find any irreparable issues, quit Disk Utility, quit the Installer, select your disk when prompted, and restart.
If the issue continues, reset PRAM. Note: After resetting PRAM, if the computer starts up normally, reselect the startup disk in the Startup Disk preferences.
If none of these steps resolve the issue, start up from the Mac OS X Installation disc and reinstall Mac OS X.

Flashing File Icon with Question Mark Upon Start-Up

Today when I went to use my computer (which was already on) it went blank and then came up with a gray screen with a flashing file icon with a question mark in the middle of it. I have already troubleshot things with several forums online and nothing has worked. I have tried to restart in Safe mode, single user mode, verbose mode, and tried to get on using my option key which got me to an internet login screen finally. I tried to log in and eventually got to an apply.com/support screen with -1007f underneath. I am not 100% which operating system I am on. I know that it is Mac OS X and pretty recent. Please respond if you can help!

Reset the SMC and PRAM
Intel-based Macs: Resetting the System Management Controller (SMC)
About NVRAM and PRAM
To boot from DVD:
Press C during startup
Start up from a bootable CD, DVD, or USB thumb drive (such as OS X install media).

When I start MacBook Pro13 shows gray Screen and flashing file Image with question mark

When I start MacBook Pro13 shows gray Screen and flashing file Image with question mark , it's brand new I just receive it from Apple Store .

Startup Manager to select Startup disk.
http://support.apple.com/kb/HT1310
Repair Disk
Steps 2 through 8
http://support.apple.com/kb/PH5836

27 inch Imac Intel won't boot up. Screen ligthts up, then shows a flashing file folder w question mark. What can I do to find the problem?

27 inch iMac Intel won't boot up. Screen lights up, then shows a flashing file folder w question mark. What can I do to find the problem?

Please readd Apple's trouble shooting steps in Flashing question mark appears when you start your Mac

MacBook Pro flashes file folder with question mark and startup manager will not run

My son's MacBook Pro won't boot (gets the flashing file folder with question mark). When I try to open startup manager (holding "option" key during boot does not do it). Other posts suggest inserting the install disk, but I am pretty sure that for Lion, there was no disk, it was just off the website through the App Store. Any further suggestions?

Reinstalling Lion/Mountain Lion Without Erasing the Drive
Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the main menu. Repair the Hard Drive and Permissions as follows.
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu.
Reinstall Lion/Mountain Lion: Select Reinstall Lion/Mountain Lion and click on the Continue button.
Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.

Hi . i have Intel based iMac. i erased whole hard disk. now it flashes folder icon with question mark... i have no internet or orginal dvd.... i want to clean install any mac osx..friend got mac book pro and osx in dmg format . what are my options?

hi . i have Intel based iMac. i erased whole hard disk. now it flashes folder icon with question mark... i have no internet or orginal dvd.... i want to clean install any mac osx..friend got mac book pro and osx in dmg format . what are my options?

On your friend's computer with an internet connection, log into the Mac App Store with your ID and download Yosemite from the Purchases section of the Mac App Store. The make a bootable USB install media using
http://liondiskmaker.com/
Then boot from that on your computer and install
You need an internet connection to install via Recovery mode

Flashing folder icons with question mark

After reading through the forums I've found a few discussions and users that have similar problems as me but haven't seen anything that deals directly with my issues.
After upgrading to Leopard last night, it ran sluggishly for about 15 minutes. I got impatient and decided to restart. While trying to restart it froze, so I just shut my powerbook down. When I tried to boot back up I got the "flashing folder icons with question mark", I've since found out that it isn't finding any type of drive to boot off of. I reset the pram, tried to reboot with the same result. Tried to boot up using cmd-s but still got nothing but flashing folders. Booted up from the Leopard install disc to try and do an archive and install and it said it couldn't upgrade because it couldn't find tiger on my machine. So I booted from the Tiger install discs to try and re-install tiger again. Tiger cant find my HD to install on; I'm thinking this may be due to Leopards install. I ran disk utility and it couldn't complete the verifying process. I got this "Error: The underlying task reported failure on exit."
After work I'm going to try to boot up in target mode to pull any data i can and try erase my HD and install from there.
To me it seems like a HD issue. Anyone have any thoughts?
Thanks in advanced.
-Chance

Chank wrote:
After reading through the forums I've found a few discussions and users that have similar problems as me but haven't seen anything that deals directly with my issues.
After upgrading to Leopard last night, it ran sluggishly for about 15 minutes. I got impatient and decided to restart.
The "sluggishness" is perfectly normal. It's well-known and it is not an issue.
You should have waited for spotlight to finish indexing.
You may have broken some links by forcing a shutdown while things were still being setup.
Which install method did you use, upgrade, archive or erase?

Flashing file icon w/ question mark at start up

My MacBook had been working fine on Tiger since I bought it last august, and a few months ago I installed Leopard, which also worked great except for safari freezing up every once in a while. But today when I tried to start it up and the blue screen appeared, it stayed like that for about ten seconds, and then a flashing file icon with a question mark appeared. I have no idea what it means, I can't make it startup. I've turned it on and off a few times, hoping for the best, but nothing. This computer is not even a year old, any help?
Thanks in advance.

Welcome to the Apple boards:
Your first hint that something was wrong was when Safari started freezing.
You may have a bad HD or at least one that is going bad.
Boot into the Leopard DVD and in the menu select Utilities and disk utility and repair HD and permissions.
See if that helps.
You may need more powerful tools such as DiskWarrior to repair the drive if it's flaky.
If the computer is less than a year old, you may be able to get it fixed at a local Apple store.

Cannot get into mac. I get a white screen and flashing file folder with question mark inside. What can I do?

2012/13 MacBook Pro froze up, so I did a hard shut down. Now, when I try to start up, it makes 3 unusual beeps, then I get a white screen. After a couple minutes, a flashing file folder with a question mark appears and remains. What is wrong and what can I do to fix it.

Three beeps usually means a RAM or RAM slots problem. The Question Mark means there is no bootable system found.
A flashing question mark or globe appears when you start your Mac
Question (?) Mark, Blinking Folder, or Gray Screen at Startup
These are related but not identical issues. Their causes are outlined in Intel-based Mac- Startup sequence and error codes, symbols. Solutions may be found in:
A flashing question mark or globe appears when you start your Mac
Mac OS X- Gray screen appears during startup
In most cases the problems may be caused by one or more of these:
a. Problem with the computer's PRAM - See Resetting your Mac's PRAM and NVRAM.
b. Boot drive's directory has been corrupted - Repair with Disk Utility.
c. Critical system files are damaged or deleted - Reinstall OS X.
d. The disk drive is physically non-functional - Replace the hard drive.
Note that the information I have provided is what Apple recommends, If other users suggest different solutions than found here, then be sure what they recommend does not impact on your warranty, if any, or ability to get continuing Apple service.
Please don't start removing drives or changing cables unless you know what you are doing and have exhausted other non-invasive alternatives outlined here. If you perform any work yourself that is unapproved by Apple, then you will void any warranty you may have and lose all further Apple Support.
Repair the Hard Drive and Permissions
Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
The main difference if you are using Lion or Mountain Lion is that you must first boot from the Recovery HD. Simply boot from the Recovery HD to perform the above.
Reinstall Snow Leopard Without Erasing The drive
1. Repair the Hard Drive and Permissions
Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
2. Reinstall Snow Leopard
If the drive is OK then quit DU and return to the installer. Proceed with reinstalling OS X. Note that the Snow Leopard installer will not erase your drive or disturb your files. After installing a fresh copy of OS X the installer will move your Home folder, third-party applications, support items, and network preferences into the newly installed system.
Download and install Mac OS X 10.6.8 Update Combo v1.1.
Reinstalling Lion/Mountain Lion Without Erasing The Drive
Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the main menu. Repair the Hard Drive and Permissions as follows.
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu.
Reinstall Lion/Mountain Lion: Select Reinstall Lion/Mountain Lion and click on the Continue button.
Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.

MacBook won't start - shows flashing folder icon with question mark

When I attempted a Spotlight search, my MacBook froze. I shut it down, and when I start again I get the sound, the blue screen, and then a flashing folder icon with a question mark. I tried starting with Option pressed down; didn't work, and now I don't even get the flashing folder icon, just the blue screen. Any suggestions?

The flashing folder with question mark means the computer can't find a working OS on the computer. This may mean your hard drive has failed.
Try holding the Shift key while starting up the machine. This puts the machine into Safe Mode.
If you have your install discs, insert Install Disc 1 and start up the computer while holding down the C key. When the Installer has loaded, choose a language. From the Utilities menu, choose *Disk Utility*. Does your hard drive show up here? If so, click on its icon (the one with manufacturer name & capacity, NOT "Macintosh HD"), and then click on the *Repair Disk* button.
If booting in Safe mode doesn't help or you don't have your install discs, you need to bring the computer to an Apple store and have the folks there look. If Disk Utility doesn't list your hard drive, it has very likely failed and will need to be replaced. If your machine is out of warranty, you're better off replacing it yourself, as it's very easy to do.
~Lyssa

Help ! Flashing folder icon with question mark when starting up

Hi, I have tried to restore my macbook pro 15 (2012 model with Yosemite OS X) to factory settings and wipe out the hard drive but on restarting it I now just get a blank screen with a flashing folder icon with a question mark on it. Any help/advice anyone I would be very grateful for ! Thanks, Mark

Something didn't install properly.
Try these in order testing your system after each to see if it's back to normal:
1. a. Resetting your Mac's PRAM and NVRAM
    b. Intel-based Macs: Resetting the System Management Controller (SMC)
2. Restart the computer in Safe Mode, then restart again, normally. If this doesn't help, then:
     Boot to the Recovery HD: Restart the computer and after the chime press and hold down the
     COMMAND and R keys until the Utilities menu screen appears. Alternatively, restart the
     computer and after the chime press and hold down the OPTION key until the boot manager
     screen appears. Select the Recovery HD and click on the downward pointing arrow button.
3. Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the Utilities menu. Repair the Hard Drive and Permissions as follows.
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu. Select Restart from the Apple menu.
4. Reinstall Yosemite: Reboot from the Recovery HD. Select Reinstall OS X from the Utilities menu, and click on the Continue button.
Note: You will need an active Internet connection. I suggest using Ethernet if possible
            because it is three times faster than wireless.
5. Reinstall Yosemite from Scratch:
Be sure you backup your files to an external drive or second internal drive because the following procedure will remove everything from the hard drive.
How to Clean Install OS X Yosemite
Note: You will need an active Internet connection. I suggest using Ethernet if possible
            because it is three times faster than wireless.

Blinking file icon with question mark at startup

my computer sort of froze so i forced restarted it (second time i've done that in its one year lifetime) and when it started back up the screen displayed a file icon with a question mark blinking on and off every two seconds. eventually the fan started humming too. i have since forced restarted it twice with the same results. any ideas on why my darling will not start properly?

My MacBook Pro did the same thing last night, and I don't think this is good news.
So far I have:
-Reset PRAM and PMU
-Startup from install disks and run Disk Utility. DU doesn't even see the drive! Even Target disk mode doesn't reveal the drive.
-Archive and install; the installer doesn't see the drive
None of these worked, and from reading on other disussions, it looks like it is a hareware problem. I will be going to the Applestore this afternoon when I get off of work to see if they can fix it.

Grey screen and file icon with question mark appearing at startup on old model macbook

We own a very old model macbook and the startup screen appears as grey and an icon appears in the shape of a file with a question mark in the middle and the startup does not proceed from there. Any help would be much appreciated.
Thanks,
Athula

Some things to check/try in no particular order:
https://support.apple.com/kb/TS1440
http://support.apple.com/kb/ts2570
https://discussions.apple.com/docs/DOC-5282

Flashing Folder icon with Question Mark

While trying Garage Band, I saved a project 'the long way' so as to open it via the Media Browser. Big mistake. Enter rainbow ball of ****.
I tried to force quit because all I was hearing was a grinding away like 'crickets' says my daughter. Could be the Hard Drive.
Now I shut it down and when I reboot, it gives me nothing but a gray screen with ? in a flashing folder icon.
Help!
Using 10.6.5, possibly 10.6.6. (Whichever one came before the Apple App Store application.)
There is 70 Gig left available in a Drive that I believe is 384G. 300 something, I recall.
This is a late 2006 Macbook, with the RAM maxed out..

That folder with the question mark icon means that the MacBook can't find the boot directory. That can either mean it can't find the hard drive or the hard drive data is somehow corrupted.
Put your install DVD into the optical drive and reboot. As soon as you hear the boot chime, hold down the "c" key on your keyboard (or the Option key until the Install Disk shows up). That will force your MacBook to boot from the install DVD in the optical drive.
Once it has finished booting and you are at the Install screen launch Disk Utility from the Utilities menu. Is your Hard Drive in the list on the left?
If it is then select the First Aid Tab run Repair Disk and if that repairs any problems run it again until the green OK appears and then run Repair Permissions.
If your hard drive isn’t recognized in Disk Utility then your hard drive is probably dead.

White screen, showing a flashing file icon with question mark??

Similar Messages

Maybe you are looking for