White screen started appearing when in Logic? RAM issue?

Hi there,
Am a relatively knowledgable MBPro user. I've an old beauty from 2007 which has done me proud all these years. I recently upgraded the OS from the original Tiger ( ! ) to Snow Leopard and the last three months all has worked smoothly.
Yesterday and today however when I've been working in Logic (still Pro8 - yes, I know!) the MBP starts performning verrry slooowwwwly (beachballs) and the white screen obliterates the arrange window. I've restarted a couple of times but the problem's still there when I open Logic and start running it.
My ETreCheck details are below.
Does anybody have any ideas as to how I mitigate this issue?
Thanks!
Adrian
EtreCheck version: 1.9.15 (52)
Report generated 2 October 2014 12:22:09 GMT+01:00
Hardware Information: ?
    MacBook Pro (17-inch Core 2 Duo) (Verified)
    MacBook Pro - model: MacBookPro2,1
    1 2.33 GHz Intel Core 2 Duo CPU: 2 cores
    2 GB RAM
Video Information: ?
    ATY,RadeonX1600 - VRAM: 256 MB
        Color LCD 1680 x 1050
        2367M 1920 x 1080 @ 60 Hz
System Software: ?
    Mac OS X 10.6.8 (10K549) - Uptime: 0 days 0:8:58
Disk Information: ?
    Hitachi HTS721010G9SA00 disk0 : (93.16 GB)
    S.M.A.R.T. Status: Verified
        - (disk0s1) <not mounted>: 200 MB
        Macintosh HD (disk0s2) / [Startup]: 92.84 GB (11.33 GB free) (Low!)
USB Information: ?
    M-Audio Ozone
    Logitech USB Receiver
    Micron Built-in iSight
    BUFFALO HD-PCU2 465.76 GB
        S.M.A.R.T. Status: Verified
        - (disk1s1) <not mounted>: 200 MB
        BUFFALO BACKUP (disk1s2) /Volumes/BUFFALO BACKUP: 465.44 GB (48.83 GB free)
    Apple Computer Apple Internal Keyboard / Trackpad
    iLok iLok
    Apple Computer, Inc. IR Receiver
    Apple Inc. Bluetooth USB Host Controller
Kernel Extensions: ?
    [not loaded]    com.Huawei.driver.HuaweiDataCardDriver (4.0.8) Support
    [not loaded]    com.digidesign.fwfamily.driver (7.4f1) Support
    [loaded]    com.digidesign.iokit.DigiDal (7.4f1) Support
    [loaded]    com.digidesign.iokit.DigiIO (7.4f1) Support
    [not loaded]    com.digidesign.mbox2.boot.driver (7.4f1) Support
    [not loaded]    com.digidesign.mbox2.driver (7.4f1) Support
    [not loaded]    com.m-audio.usb.midisupport.driver (1.1) Support
    [loaded]    com.maudio.usb.ozone.driver (1.8.1) Support
    [not loaded]    com.motu.driver.FireWireAudio (1.5 41560) Support
    [not loaded]    com.motu.driver.USBMidiKext (1.6 49190 - SDK 10.4) Support
    [not loaded]    com.paceap.kext.pacesupport.leopard (5.9.1 - SDK 10.4) Support
    [not loaded]    com.paceap.kext.pacesupport.master (5.9.1 - SDK 10.6) Support
    [not loaded]    com.paceap.kext.pacesupport.panther (5.9.1 - SDK 10.3) Support
    [loaded]    com.paceap.kext.pacesupport.snowleopard (5.9.1 - SDK 10.6) Support
    [not loaded]    com.paceap.kext.pacesupport.tiger (5.9.1 - SDK 10.4) Support
    [loaded]    tc.tctechnologies.driver.TCNear (3.5.6 11675) Support
Startup Items: ?
    Digidesign Mbox 2: Path: /Library/StartupItems/Digidesign Mbox 2
    DigidesignLoader: Path: /Library/StartupItems/DigidesignLoader
    HP Trap Monitor: Path: /Library/StartupItems/HP Trap Monitor
    HWNetMgr: Path: /Library/StartupItems/HWNetMgr
    HWPortDetect: Path: /Library/StartupItems/HWPortDetect
    M-Audio Firmware Loader: Path: /Library/StartupItems/M-Audio Firmware Loader
    MAudioOzone: Path: /Library/StartupItems/MAudioOzone
    Qmaster: Path: /Library/StartupItems/Qmaster
Launch Daemons: ?
    [loaded]    com.adobe.fpsaud.plist Support
    [loaded]    com.bombich.ccc.plist Support
    [running]    com.bombich.ccc.scheduledtask.B5EE8738-6951-42B0-8CD7-BB586DD6B937.plist Support
    [running]    com.digidesign.fwfamily.helper.plist Support
    [running]    com.m-audio.usb.firmwareloader.plist Support
    [running]    com.paceap.eden.licensed.plist Support
    [running]    org.glimmerblocker.proxy.plist Support
    [loaded]    PACESupport.plist Support
Launch Agents: ?
    [loaded]    com.hp.help.tocgenerator.plist Support
    [running]    com.motu.MOTULauncher.plist Support
    [loaded]    org.glimmerblocker.updater.plist Support
User Launch Agents: ?
    [running]    com.bombich.ccc-user-agent.plist Support
    [loaded]    com.macpaw.CleanMyMac.helperTool.plist Support
    [loaded]    com.macpaw.CleanMyMac.trashSizeWatcher.plist Support
    [loaded]    com.macpaw.CleanMyMac.volumeWatcher.plist Support
User Login Items: ?
    System Events
    Activity Monitor
    Dropbox
    HPEventHandler
Internet Plug-ins: ?
    Flip4Mac WMV Plugin: Version: 2.3.6.5 Support
    FlashPlayer-10.6: Version: 15.0.0.152 - SDK 10.6 Support
    JavaAppletPlugin: Version: 13.9.8 - SDK 10.6 Check version
    Flash Player: Version: 15.0.0.152 - SDK 10.6 Support
    QuickTime Plugin: Version: 7.6.6
    Silverlight: Version: 5.1.30317.0 - SDK 10.6 Support
    Google Earth Web Plug-in: Version: 7.1 Support
    iLokClientHelper: Version: 3.1 Support
    RealPlayer Plugin: Version: (null) Support
    AmazonMP3DownloaderPlugin101749: Version: Unknown
    iPhotoPhotocast: Version: 6.0
iTunes Plug-ins: ?
    Quartz Composer Visualizer: Version: 1.2
3rd Party Preference Panes: ?
    DigidesignMbox2 Support
    Digidesign Mbox 2 Pro Support
    Flash Player Support
    Flip4Mac WMV Support
    GlimmerBlocker Support
    Growl Support
    MAudioOzone Support
Time Machine: ?
    Time Machine information requires OS X 10.7 "Lion" or later.
Top Processes by CPU: ?
         3%    activitymonitord
         2%    WindowServer
         1%    ps
         0%    fontd
         0%    firefox
Top Processes by Memory: ?
    238 MB    firefox
    70 MB    Dropbox
    59 MB    WindowServer
    59 MB    GlimmerBlocker
    53 MB    WebProcess
Virtual Memory Information: ?
    875 MB    Free RAM
    705 MB    Active RAM
    277 MB    Inactive RAM
    190 MB    Wired RAM
    229 MB    Page-ins
    0 B    Page-outs

AdrianZag wrote:
Now you have me worried, has CleanMyMac done 'damage' to my system?
And is an unistall AND a reinstallation of Snow Leopard really necessary?
I cannot say with certainty. I would make certain that your data is backed up, erase the HDD, install the OSX and then upgrade it to 10.6.8. Then install the user data. Any problems that may have been resident should be gone.
RAM upgrade issue: I researched via the Apple site if my particualr MBPro could have extra memory installed. After much online reserach, it was inconclusive - so I called Apple up and a techie told me that my model was one of the last that couldn't have RAM added. Are you sure he was incorrect? Obviously adding 1GB would indeed make a huge difference.
Do be suspicious and challenge advice you receive on these and any other forums. Mistakes can be made and I have to admit I have done so, but not too often. I have witnessed bad advice but I have never thought it was offered deliberately.
Regarding RAM, you have been misinformed. Your MBP will accept 3 GB RAM. Look at these two links, one for OWC and the other Crucial:
http://eshop.macsales.com/shop/memory/MacBook/Pro/Core2/http://eshop.macsales.com/shop/memory/MacBook/Pro/Core2/
http://www.crucial.com/usa/en/compatible-memory-for/Apple/macbook-pro-2*33ghz-in tel-core-2-duo-(17-inch)
Read them carefully and you will see that both corroborate my position.
Ciao.

Similar Messages

Only screen saver appears when connected to HDTV

Only screen saver appears when connected to HDTV?

Check the Energy Saver and Screen Saver settings, sounds like you have Energy Saver kicking-in before Screen Saver.

Apple Logo Screen (turn on screen) suddenly appear when using

Apple Logo Screen (turn on screen) suddenly appear when using my iPad Mini Retina, but every thing goes back to normal after. It happens like few times since I bought my iPad since December. My OS is ISO7.0.4

The iPad basically re-booted.
Eveytime it re-boot, take note of what app you are running. You need to find out what is causing the re-boot.

I can't get beyond a white screen starting my imac

This happened many months ago but my imac
evetnually started. Today I have tried several times
to start my imac and can't get beyond the white screen.
I get the mac sound at when it is trying to start up but then freezes
at the white screen.
Any help would be appreciated.
Thank.
Kevin

The following support article is somewhat outdated. Where it refers to booting from an installation disc, you should boot from your recovery partition (if running 10.7 or later) by holding down the key combination command-R at the chime. If your startup volume is encrypted with FileVault, you’ll have to unlock it in Disk Utility before you can do anything with it.
Mac OS X: Gray screen appears during startup

White Screen at Boot When Attempting to Access Recovery or Select a Boot Disk

Introduction
I want to share a solution for a problem I encountered that Apple technical support was unaware of (they said they would create a new kdoc when I called them to share my problem and its solution) and for which I could find no documentation online.
First, this is really a tip rather than a question, but I did leave it marked as a question in case anyone wants to earn some points by responding with a different solution to the problem I am about to describe. Additionally, I do not have a enough points to post a "Tip" so I am just starting a discussion instead.
Next, when I encountered the problem I am about to describe, I had not yet enabled a firmware password.
Finally, a massive "Thank you!" to the Great Pondini (James Pond - http://pondini.org) for helping me learn so much more interesting stuff about various OS X features and functionality (all for no charge) over the years.
Now on to why I have started this discussion...
The Problem
I recently purchased a new MacBook Pro (Core i7, SSD, etc.). After working with Setup Assistant to transfer everything from the most recent Time Machine backup of the older MBP I was replacing, applying all OS updates, and then enabling FileVault 2 and letting the requisite disk encryption process complete, I decided to I would go ahead and just proactively repair any permissions and ACLs for my user directory just in case any repair was necessary.
However, after shutting down my MBP, waiting, and then starting it up with Cmd-R being pressed while turning the MBP on, nothing would happen - I would just have a white screen with no Apple logo, no EFI login, no Recovery Console, nothing (and I waited for a very long time for something to show up). My only option was to do what I really do not like doing and that was to just power my new MBP down.
So, I tried again, this time holding down Opt while turning my computer on so as to select a disk at boot. The same problem returned.
Just to check, I once again started up while holding down the Shift key to attempt a Safe Boot. No dice.
Prior to trying all of this I made sure that I did have the Apple Recovery Partition in addition to my user partion and the EFI partition, so I did not understand why this would be happening. Why could I not boot into Recovery? Why could I not select a boot disk? And, why could I not go into Safe Boot?
To be safe, I started up and logged into my MBP as I normally would, then set my startup disk to be my Recovery USB for OS X 10.8, restarted, and verified all three partitions (and, since I had my Time Machine disk connected all three times I forced the computer to power off, I verified it as well). I then set my startup disk back to my SSD, and logged in and got online to see if anyone else had experienced this issue. After making sure I was not being crazy and using key combinations that were somehow made irrelevant, I shut my MBP down and walked away for a few minutes.
The Solution
So what solved my problem? A good 'ol reset of the NVRAM (aka/fka PRAM). If you are not familiar with how to reset the NVRAM:
Power off your Mac and go do something else for 30 seconds to a minute.
Press and hold down the Opt, Cmd, P and R buttons, and then press the power button. I have big hands and this is a one person operation for me. If you are not so "lucky", find someone to press the power button as you hold those four buttons down.
Continue holding those four buttons down through the first startup chime and then release all four of them only after the second startup chime is sounded.
So, for some reason, I had to reset the NVRAM on a brand new MBP that had been started up only once and restarted only once when I enabled FV2. Maybe something cached needed to be cleared out following the FV2 process, or maybe something funky was carried over after it was setup in the factory and shipped direct to me from China.
The moral of the story is: If you have strage issues during the startup of your Mac, just reset the NVRAM and try again. This has worked for a number of strange issues on various Macs for me in the past and proved to be useful once again on a brand new MBP that I never would have thought needed its NVRAM reset so soon into its lifecycle.
Special Note
There are two processes I always complete and recommend to others following a major software update (e.g. upgrading to a new version of OS X) and when I restore or otherwise transfer the most recent Time Machine backup to my current Mac or to a new one.
First, following a major or massive software update, go into Disk Utility, select your system and data drive(s), and then just click on "Repair Permissions" (Choosing "Verify Pemissions" will result in having to then click "Repair Permissions" if any permissions need to be repaired, so remove one click from the process).
Second, after transferring from a Time Machine backup, I like to make sure that my user directory permissions are good to go before any time is allowed for problems with those permissions to set in. If you are not familiar with the user directory permissions and ACL repair process (this process is not the same as the "Repair Permission" functionality in Disk Utility), here is how to do it:
Shutdown your Mac and wait about 30 seconds.
Press and hold down Cmd-R and then power on your Mac. Once the Apple logo with the spinning wheel shows up, release those two keys.
From within the Recovery Console, open a new Terminal session via the "Utilities" menu.
Invoke the following command (all one word, lowercase): resetpassword
In the "Reset Password" application that opens, select the disk that your user home directory is on, and then click the "Reset" button at the bottom underneath the "Reset Home Folder Permissions and ACLs" heading and wait for the process to finish. Any messages displayed can typically be safely ignored. If you want to be sure, search for information regarding any messages that you do not like.
Restart your MBP and enjoy using it.
(Note that if you have FV2 enabled, you will need your FV2 Recovery Key to actually reset your password. This is one of many reasons that I enable FV2 - anyone can startup a Mac and go into the Recovery Partition if it exists and reset a password, but having to also enter the FV2 Recovery Key adds a nice extra layer of protection. In addition to that, setting a Firmware Password makes it nearly impossible to start up from any disk other that that which is currrenlty installed in your Mac without knowing the Firmware Password - another security bonus. If someone gets ahold of your Mac, and you have FV2 enabled and an appropriately complex Firmware Password set, then them using your Mac as their own becomes a decently difficult process. It's by no means perfect computer security, but it makes it more challenging for someone to steal and use your Mac.)
If anyone has any other tips to share or additional solutions to problem I described, please discuss and share.

Which OS X is installed on your Mac ?
Troubleshooting advice can depend on that information.

What can you do when you see a white screen of death when you turn your computer on

My MacBook Pro had the color wheel rotating when I clicked on a link. It stopped and displayed a white screen. There was no way to force quit or do anything else, so I pressed the power button and turned it off. Since then, I have removed the battery and the cord, replaced them, and turned it back on. It does come on, but it displays the same white screen and nothing else. What is the problem?

Sounds like your hard drive died and the NVRAM got flushed.
You'll have to take it in and/or replace the drive and install your EFI firmware from cd to be able to install OS X back onto the machine.
Install/upgrade RAM or storage drive in Mac's
Restoring firmware on Intel Mac's
How to erase and install Snow Leopard 10.6
For Snow Leopard Speed Freaks

White console box appears when running dis51usr.exe

Hi all,
I have a user when she attempts to run Discoverer Desktop 10 either via shortcut or via command line by typing dis51usr.exe instead of the program opening a white empty box appears in the middle of the screen titled 'Console' and nothing else happens.
Any ideas?
thanks,
rg

Hi Clifford
The path looks right. On my PC, with Desktop and Admin, my path settings for Discoverer look like this:
%DISCO10%\bin; (171 files and 0 folders)
%DISCO10%\jlib; (53 files and 1 folder)
%DISCO10%\jre\1.4.2\bin\client; (2 files)
%DISCO10%\jre\1.4.2\bin; (62 files and 1 folder)
where %DISCO10% is c:\oracle\BIToolsHome_1
I can't see anything wrong with the path. This is very mystifying. I think you may have to speak with Oracle Support. Other than the Discoverer installation being corrupt with one or more files missing I can't think why you would be seeing a white console box. I'll keep researching and if I come upon anything I will let you know. To help I have listed alongside each of my locations the number of files and fodlers I have. If yours is different there is a possibility of a corruption.
Best wishes
Michael

Plz help. MacBook Pro doesn't want to start up. Stays on white screen starting up!

Ok, so my MacBook Pro is not starting up properly. When I shut it down and turn it back on my Mac just froze on the white screen when starting it up. All I have now is a start up blank screen with the apple and the small spinning wheel below it. Just like starting you MacBook normally but instead it just stays there with the wheel spinning for minutes!!! Nothing come up. Not my sign in screen but the white screen. Pls help!!!

hoangtu23 wrote:
I have this question too.
Below is video record of my macbook pro screen:
http://www.youtube.com/watch?v=8xThWNuw7t0
For hoangtu23, looks like you have a graphics card problem that will need a visit to an Apple Store (make a genius bar apointment first) or to a Apple authorized service center.

How can I get rid of a white screen that appears for 3 secs on startup

Since my last Thunderbird upgrade to 31.3 I get a white screen for 3 seconds during start-up and before I see my folders.
I use Thunderbird to access one Yahoo.co.uk account and 2 Outlook.com accounts.
All plugins are disabled.
I have one extension, CompactHeader 2.0.9 which I removed but the problem remained. I have now reinstalled it.
I uninstalled and reinstalled Thunderbird - problem just the same.
If I start in safe mode there is no white screen, it loads normally straight to folders.
I'm not sure what to try next so any suggestions are welcome.
Cheers

What addons or themes do you have installed?
What happens if you disable them?
If you have none, please install beta from http://www.mozilla.org/en-US/thunderbird/channel/ and visit tools | options | advanced | uncheck use hardware acceleration and restart
is thunderbird better?

White screen 3GS only when phone locks but I am volunteering in Africa so need help

Hi everyone.
This is my first post on communties. I have a white screen on my 3GS. It can be rectified by resetting the home but as soon as the phone is locked it goes back to white but I can take a photo of the homescreen (can tell by sound), phone will ring etc.
After reset the phone functions completely normally until locked. This all started after IOS 5 upgrade, briefly became normal for a few days after IOS5.1 but now back to white screen probelms. I have restored to no avail.
I have read Brad's suggestion it may be an LCD problem but seems stranges as you can reset the phone and the LCD is fine until it locks.
Any ideas and or fixes, please bear in mind I am in Africa for a year so no Apple stores around.
Thanks in advance, as the phone is 2 years old I am willing to open it up if required but would need advise on how/what tools required.

Basics from the manual are restart, reset, restore.
Try all of these.
If these fail, then:
iOS: Unable to update or restore

White screen and freeze when trying to restart after downloading Mountain Lion 8.2 upgrade. Mac will not shutdown or restart without freezing on whitescreen.

Downloaded Mountain Lion update 10.8.2 last night. All went well until the message after the download – restart your mac to install this update. The screen went white and the machine didn’t restart. After waiting for quite a while, I shutdown using the main power button. Restarted iMac later and it opened in 10.8.1 and the iTunes icon informed me that I had an upgrade to 10.8.2 that required me to restart the machine to install the upgrade. I did this and again, the screen went white and froze when trying to restart. Rebooted thinking I might be OK to run in 10.8.1 and ignoring the update but when I tried this the Mac worked fine but when I came to shut down I got the white screen freeze thing again. Does anyone have any easy-to-follow solutions for this or will I have to shut down using the main power button every day?
Many thanks for any suggestions.

Bootup holding CMD+r, or the Option/alt key to boot from the Restore partitirion & use Disk Utility from there to Repair the Disk, then Repair Permissions.
If that doesn't help Reinstall the OS.

How do I remove the white rectangle that appears when you hover over a nav button or email link?

In properties I have link color white, visited blank, rollover blank and active blank. When viewed in chrome, IE or firefox a white rectangle appears when you hover over each link. What is the procedure for removing this?

This is my CSS
.gridContainer {
          width: 89.0217%;
          max-width: 1232px;
          padding-left: 0.4891%;
          padding-right: 0.4891%;
          margin: auto;
          clear: none;
          float: none;
          margin-left: auto;
          color: #FFFFFF;
          background-color: #0033FF;
          border-radius: 15px;
          padding-top: 2%;
          padding-bottom: 2%;
#div1 {
          width: 100%;
          padding-top: 2%;
          background-color: #FFFFFF;
#Navdiv {
width: 24.1758%;
#Intro1 {
width: 74.7252%;
margin-left: 1.0989%;
clear: none;
#Intro2 {
          width: 74.7252%;
          margin-left: 1.0989%;
          clear: none;
          text-align: center;
#Intro3 {
width: 49.4505%;
#Intro4 {
width: 49.4505%;
margin-left: 1.0989%;
clear: none;
#Intro5 {
width: 100%;
#Footer1 {
          width: 100%;
          text-align: center;
          padding-top: 2%;
          padding-bottom: 2%;
#Footer2 {
          width: 100%;
          text-align: center;
          padding-top: 2%;
          padding-bottom: 2%;
#Footer3 {
          width: 100%;
          text-align: center;
          padding-top: 2%;
          padding-bottom: 2%;
#Footer4 {
          text-align: center;
          padding-bottom: 2%;
#Navheader {
          margin-left: 0;
          clear: both;
          width: 100%;
          text-align: center;
          background-image: -webkit-linear-gradient(270deg,rgba(255,255,255,1.00) 0%,rgba(0,51,255,1.00) 100%);
          background-image: -moz-linear-gradient(270deg,rgba(255,255,255,1.00) 0%,rgba(0,51,255,1.00) 100%);
          background-image: -o-linear-gradient(270deg,rgba(255,255,255,1.00) 0%,rgba(0,51,255,1.00) 100%);
          background-image: linear-gradient(180deg,rgba(255,255,255,1.00) 0%,rgba(0,51,255,1.00) 100%);
.Ulnav {
width: 100%;
margin-left: 0;
.Listnav {
          width: 100%;
          margin-left: 0;
          text-align: center;
          background-color: #0033FF;
          padding-top: 1%;
          padding-bottom: 1%;
          color: #0033FF;
#spacer1 {
width: 100%;
margin-left: 0;
clear: none;
#spacer2 {
.zeroMargin_desktop {
margin-left: 0;
.hide_desktop {
display: none;

5th Gen iPOD has white screen and beeps when center and menu button is held

My ipod was perfectly fine until I downloaded iPod Updater 2006-01-10...now, my ipod has a white screen, won't turn off (white screen stays on) and when I hold the center and menu button down, it does a 3 syllable beep. I've done the switching the hold button back and forth; resetting my ipod; restarting my PC; un-installing and re-installing both the itunes software and the ipod updater and still no working ipod. I am atleast trying to restore it to factory settings, but, I get an error message on the iPod updater screen. Can anyone help? Thanks!

everybody listen to babara hall, genius, it takes a while but reset it one more time using menu and selct and while its off for a few seconds push selct and play/pause, hold it for a long while, then let go and you'll see the apple logo and everything will go back to the way it was before.
p.s. thank you so much, ipods working great now, glad someone knows what there doing instead of apple,lol

White screen in viewer when importing motion file.

When I importing a motion file into FCP, I get a white screen in the viwer. Obviously, this makes it impossible to mark in and out points. Tried everything with no luck. I am sure it is operator error. Any help will be greatly appreciated.
Best,
Thomas

You are probably viewing the alpha channel only.
At the top of the viewer are three buttons. The rightmost one controls the view settings. Select RGB and life should be good again.
cheers,
x

**HELP** Unwanted white lines/shapes appear when Brush tool is used

I have been using Photoshop Elements for several years and I really liked it.But just recently I found out that in Photoshop Elements 10, whenever I use Brush or Smart Brush Tools, unwanted white ines/dots/shapes appear on the pictures. This is driving me crazy! What went wrong?? I've done the following:
Reset all preferences by clicking Ctrl + Alt + Shift
Reset all tools.
Restart my computer.
Nothing worked! Please help!!!
I have attached the original and the picturec problems below:
Original: very clean background
Problem: What are those lines??????

Yes I did solve the problem!
Thanks to everyone that suggested things, but none of them worked. In the end it was Wacom, yes... WACOM that solved the problem. Even though it was an Adobe Photoshop issue as far as I could tell. So thank you Wacom, you helped me when I needed it most.
So now to the vital solution:
"Thank you for your recent enquiry regarding pen tool in Adobe Photoshop CS3.
Please try the step below for reset CS3
For MAC, please hold pressing command + alt+ shift, then open Photoshop.
Get the CS3 update. Start CS3 while holding.
If the problem remains, uninstall and reinstall Adobe Photoshop CS3 again."
Worked the first time for me. So spread the word! This issue shall trouble people no more, a solution has been found!

White screen started appearing when in Logic? RAM issue?

Similar Messages

Maybe you are looking for