White screen when attaching printer
Help, my HP Deskjet multifunction device was working ok with my Mac Mini,, then I couldn't scan so I deleted the printer in prefs and reinstalled it.
This was when the problem started, because now if I try to start Mac Mini with printer connected via USB and I get a white screen on boot up I've tried waking for 10 mins and still nothing.
However, as soon as I disconnect the printer it boots ok.
Any help to fix this greatly appreciated.
It's time to get a new printer.
Similar Messages
-
I downloaded 11.1 but now can't access the store, can only view my library. I've reinstalled but still get a blank, white screen when I try to go to the itunes store. How can I get to the store for purchases?
In iTunes prefs>Store - is the Store check box unchecked?
Did you repair pemissions with Disk Utility?
MJ -
What is missing when I get a blank white screen when I try to Access some web sites?
On some web sites, I get a blank white screen when I try to access them.
You can try these steps in case of issues with web pages:
You can reload web page(s) and bypass the cache to refresh possibly outdated or corrupted files.
*Hold down the Shift key and left-click the Reload button
*Press "Ctrl + F5" or press "Ctrl + Shift + R" (Windows,Linux)
*Press "Command + Shift + R" (Mac)
Clear the cache and remove cookies only from websites that cause problems.
"Clear the Cache":
*Firefox/Tools > Options > Advanced > Network > Cached Web Content: "Clear Now"
"Remove Cookies" from sites causing problems:
*Firefox/Tools > Options > Privacy > "Use custom settings for history" > Cookies: "Show Cookies"
Start Firefox in <u>[[Safe Mode|Safe Mode]]</u> to check if one of the extensions (Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem.
*Switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance
*Do NOT click the Reset button on the Safe Mode start window
*https://support.mozilla.org/kb/Safe+Mode
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes -
I have a new ipad and everything works but can't connect to the app store. Itunes works and the wifi seems to be working but i get a blank white screen when i open the appstore. Nothing will load unter the features or charts tab so i cant download any apps. Purchased and updates tab loads fine. Any suggestions?
You would get better response from the iTunes community forum.
Have a nice day! -
Hello all,
I have a 14.88G iPod Nano that I currently use as my primary watch. A week or so ago I started to experience a blank white screen when I press the "sleep/wake" button instead of the watch face (I have it set to wake from sleep to display the clock). When I hard reset it, it will come back fine and the screen will respond and work as normal, as soon as I manually put it to sleep by pressing the "sleep/wake" button and then try to wake it the same thing happens and I have a blank white screen that doesn't respond to touch gestures or anything.
What I have tried so far to no avail:
Numerous hard restarts (holding the "sleep/wake" button with the volume - button).
Tried this: iPod nano (6th generation): Hardware troubleshooting
Changed the watch face to display.
Recharged the device overnight (without full discharge).
Since none of this works I'm out of ideas. Eventhough I have a 6G Nano it should no longer be under warranty since I was sent it as a replacement for a different (older) product.
Any ideas? Is this a known problem? Thanks in advance for any insight any of you could provide. Also, what time is it??
Regards,Hey,
I have the exact same problem as you have described. I also used my ipod as a watch but starting from today, whenever I unlock it the screen turns white until a reset is done. Even a factory reset through itunes didn't fix it.
Have you found any solution?
Bah, this is annoying.
//Gubbar -
My MacBook Pro shows the logo in a white screen when I ask for a Software Update under the apple. Actually it stays blank on Featured, Top Charts, Categories and Purchases as well. What up? Thanks.
I am having exactly the same problem right now. After some research, it looked like my HD was toast. I replaced it today, that part was easy, but now I cannot seem to use my original Install Disk to format the new HD. I get a grey restart screen, or if I get to the Language Selection screen, my cursor is frozen in left corner and I can't use it.
Very frustrating, hope someone else has some ideas!
PS My MacBook was about same age, and "expired" in exactly the same way as yours. -
White screen when I open itunes
Upgraded to iTunes 10.5 and get white screen when I open iTunes on computer with Windows 7.
Whitescreen is easy to fix in the security settings of Safari! Allow Cookies - other Apps will also work, like BankingApps...
Whitescreen in iTunesStore App @ iOS7 fixed in den Sicherheitseinstellungen von Safari. Einfach "Cookies erlauben". Andere Apps funktionieren dann auch zB Online Banking
thx2max -
White screen when I turn the Satellite M50 on
I intermittently just get a white screen when I turn the computer on. Usually the problem is solved by switching the computer off and trying again - but sometimes I get a white screen again.
It seems to be connected to use of external devices - can anyone give me clear instructions about what should/should not be connected when I start and shut down the computer? Or any other suggested solutions?
ThanksThanks for your reply/advice - and the tip about Antivir. I used to use AVG and then Norton came as a package with this laptop....will have a re-think when my subscription need renewing.
I have updated the display/graphics driver but am still having the same problem of a white screen at boot-up. On reflection I think it is possibly a loose connection as I have just been a long trip with the laptop - including a fairly bumpy 4 hour bus ride - and I recall having the same problem several months ago which self-corrected after a similar trip (taking it down to a Toshiba ASP who never saw it as they were closed for the week-end and I had to get back to work!). This may sound strange but I took the laptop for a walk yesterday to see if any loose connection would shift and it then booted up on the second attempt rather than the 8th!
I guess I'll have to take it to the ASP - unfortunately it's no longer under warranty.
EDIT:
Problem solved. High temperature caused this issue
http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=23402 -
White screen when turn ipod touch on...help
There is a white screen when I turn my iPod touch on. please help
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
I have a bright white screen when turning on my nano 7th gen. Have tried resetting and restoring settings - no change. Any ideas please?
Hello pipworms,
I would be concerned too if my iPod nano's was just showing a white screen. I recommend following the steps below:
Display shows a white screen
Try putting the iPod into disk mode:
Reset the device (Reset the device by pressing the Sleep and Home buttons simultaneously until the display shows the Apple logo. This should take about eight seconds).
When the Apple logo appears, press and hold the Volume Down and Volume Up buttons simultaneously until the device enters Disk Mode.
While the device is in disk mode, sync it to iTunes and try to restore.
I got this information from the following article for the 6th generation iPod nano. The steps are the same, except I updated the reset steps with the reset for the 7th generation iPod nano:
iPod nano (6th generation): Hardware troubleshooting
http://support.apple.com/kb/ts3474
How to reset iPod
http://support.apple.com/kb/ht1320
Putting iPod into Disk Mode
http://support.apple.com/kb/HT1363
Thank you for using Apple Support Communities.
Best,
Sheila M. -
I can't get past white screen when starting up, any ideas?
I Can't get past white screen when starting up, any ideas
http://support.apple.com/kb/TS2570 Mac OS X: Gray screen appears during startup
===============
When posting in Apple Communties/Forums/Message Boards.......It would help us to know which Mac model you have, which OS & version you're using, how much RAM, etc. You can have this info displayed on the bottom of every post by completing your system profile and filling in the information asked for.
CLICKY CLICK---> https://discussions.apple.com/docs/DOC-3602
CLICKY CLICK-----> Help us to help you on these forums -
Sometimes my ipod gen 5 display white screen when i choose to see a photo , was it broken ?
Likely a corrupted photo file:
Try:
- Importing the proplem photos to your computer and viewing them
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Backup and then restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device. -
HT1414 my ipod touch in white screen when i connect to the itunes can'tbe detected
my ipod touch in white screen when i connect to the itunes can'tbe detected
If not sucessful try:
Try:
- iOS: Not responding or does not turn on
- If not successful and you can't fully turn the iPod fully off, let the battery fully drain. After charging for an least an hour try the above again.
- If still not successful that indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order. -
I get a white screen when I try to enter iTunes Store
I get a white screen when i enter the iTunes store. The toolbar on the left is OK. The top is OK. It doesn't crash or anything, and I am logged in when I do it.
If you're seeing a blank iTunes Store, you could try resetting Winsock. That's fixed the problem for some people.
Click on your Start menu, go to accessories, and click the Command Prompt icon. Once it opens, type in the following command...
netsh winsock reset
Press Enter and it should say something like "winsock reset successful:
Then reboot your computer and try the iTunes Store again.
Hope this helps. -
Zen 4GB... Flashing white screen when powered o
I was wondering if anyone has encountered this problem.
My new Zen... since the day I received it, flashes a white screen when it is just sitting there on my desk. It turns on then off real quick randomly... I notice it because I keep it at my computer desk... it happens at random, I actually see it happen maybe to 4 times a day. It does it on 4 different firmwares including the newest firmware. I was hoping the next one may fix it but it does seem more logical that this is a hardware issue. It works perfectly whiled turned on... but it seems possessed by turning on by itself and I am thinking of returning it before it turns into a bigger problem. I'm assuming bad wiring... maybe just with mine...
Don't let this discourage you though... it is a great mp3 player.Yes, i have that flashing screen, too. It?s so very annoying ...
With the stock firmware, the .03, I have only problem, the hold-mode.
If I turn hold-mode on, the display shuts down, quite normal.
If I turn hold-mode off, the display shows only a white screen, nothing else,
music keeps running and I can push keys, but i can't see anything ...
Maybe you are looking for
-
sir i entered my icloud id when i want to activate my iphone.. i am **** sure that id i am entering in iphone is correct.. still iphone says this id could not activate this iphone... i disable find my iphone and deleted icloud from iphone before rest
-
How to run a particular case continuously in event based state machine architecture.
I am making a program using event based state machine architecture, it is running as expected whenever i am generating an event, case structure corresponding to that event executes. we are taking some measurements from oscilloscope e.g. i am having o
-
How can I reuse titles for different titels
I would like to reuse the same titles for many/all of my videos, which naturally reside in different projects. How can I do this?
-
hello expert, can you please tell me how to send only new recorded, or changed vedor master using IDOC, the problem is when i use BD14 or BD15, it's sends master data of all vendor even those that i've send before. so can give me a solution. thank y
-
Eban-banpr is not exists in sap4.6
Hi gurus, Processing status - eban-banpr is exists in ECC6, but not in sap4.6. Pls tell me where Processing status BANPR is maintained in 4.6? Or Is there any alternate field for banpr in 4.6?