White screen when connected to pc

I have a curve 8520, and have been haveing all kinds of issues with it, first it doesn't see my mem card, well still doesn't........but the major thing is now that I can connect my bb to my pc to back it up, I get a white screen immediately, then when I unplug it it starts up again, as if I did a battery pull.

http://supportforums.blackberry.com/t5/BlackBerry-Curve/White-Screen-with-message-Connecting-to-Desk...

Similar Messages

  • I have a new ipad and everything works but can't connect to the app store. Itunes works and the wifi seems to be working but i get a blank white screen when i open the appstore.Nothing will load unter the features or charts tab. Any Suggestions?

    I have a new ipad and everything works but can't connect to the app store. Itunes works and the wifi seems to be working but i get a blank white screen when i open the appstore. Nothing will load unter the features or charts tab so i cant download any apps. Purchased and updates tab loads fine. Any suggestions?

    You would get better response from the iTunes community forum.
    Have a nice day!

  • HT1414 my ipod touch in white screen when i connect to the itunes can'tbe detected

    my ipod touch in white screen when i connect to the itunes can'tbe detected

    If not sucessful try:
    Try:
    - iOS: Not responding or does not turn on
    - If not successful and you can't fully turn the iPod fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - If still not successful that indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.

  • White screen when I turn the Satellite M50 on

    I intermittently just get a white screen when I turn the computer on. Usually the problem is solved by switching the computer off and trying again - but sometimes I get a white screen again.
    It seems to be connected to use of external devices - can anyone give me clear instructions about what should/should not be connected when I start and shut down the computer? Or any other suggested solutions?
    Thanks

    Thanks for your reply/advice - and the tip about Antivir. I used to use AVG and then Norton came as a package with this laptop....will have a re-think when my subscription need renewing.
    I have updated the display/graphics driver but am still having the same problem of a white screen at boot-up. On reflection I think it is possibly a loose connection as I have just been a long trip with the laptop - including a fairly bumpy 4 hour bus ride - and I recall having the same problem several months ago which self-corrected after a similar trip (taking it down to a Toshiba ASP who never saw it as they were closed for the week-end and I had to get back to work!). This may sound strange but I took the laptop for a walk yesterday to see if any loose connection would shift and it then booted up on the second attempt rather than the 8th!
    I guess I'll have to take it to the ASP - unfortunately it's no longer under warranty.
    EDIT:
    Problem solved. High temperature caused this issue
    http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=23402

  • HT1414 iPhone works okay when charging but often gets a white screen when I take it off charge

    iPhone works okay when charging but often gets a white screen when I take it off charge - I have tried resetting it and getting help online but the system asks me for an email address and my iPhone isn't set up for emails yet - if I got a text to trigger the automatic diagnostic service I could retrieve it from my 'poorly' device

    First, update iTunes, then connect the phone to the computer and do a restore. This will also get your iOS up to date. Your phone should operate correctly after doing this, if not, you will most likely need to have the phone serviced or replaced.

  • I downloaded 11.1 but now can't access the store, can only view my library. I've reinstalled but still get a blank, white screen when I try to go to the itunes store. How can I get to the store for purchases?

    I downloaded 11.1 but now can't access the store, can only view my library. I've reinstalled but still get a blank, white screen when I try to go to the itunes store. How can I get to the store for purchases?

    In iTunes prefs>Store - is the Store check box unchecked?
    Did you repair pemissions with Disk Utility?
    MJ

  • What is missing when I get a blank white screen when I try to Access some web sites?

    On some web sites, I get a blank white screen when I try to access them.

    You can try these steps in case of issues with web pages:
    You can reload web page(s) and bypass the cache to refresh possibly outdated or corrupted files.
    *Hold down the Shift key and left-click the Reload button
    *Press "Ctrl + F5" or press "Ctrl + Shift + R" (Windows,Linux)
    *Press "Command + Shift + R" (Mac)
    Clear the cache and remove cookies only from websites that cause problems.
    "Clear the Cache":
    *Firefox/Tools > Options > Advanced > Network > Cached Web Content: "Clear Now"
    "Remove Cookies" from sites causing problems:
    *Firefox/Tools > Options > Privacy > "Use custom settings for history" > Cookies: "Show Cookies"
    Start Firefox in <u>[[Safe Mode|Safe Mode]]</u> to check if one of the extensions (Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem.
    *Switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance
    *Do NOT click the Reset button on the Safe Mode start window
    *https://support.mozilla.org/kb/Safe+Mode
    *https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes

  • Hello all,     I have a 6G iPod Nano that I currently use as my primary watch. A week or so ago I started to experience a blank white screen when I press the "sleep/wake" button instead of the watch face (I have it set to wake from sleep to display the cl

    Hello all,
    I have a 14.88G iPod Nano that I currently use as my primary watch. A week or so ago I started to experience a blank white screen when I press the "sleep/wake" button instead of the watch face (I have it set to wake from sleep to display the clock). When I hard reset it, it will come back fine and the screen will respond and work as normal, as soon as I manually put it to sleep by pressing the "sleep/wake" button and then try to wake it the same thing happens and I have a blank white screen that doesn't respond to touch gestures or anything.
    What I have tried so far to no avail:
    Numerous hard restarts (holding the "sleep/wake" button with the volume - button).
    Tried this: iPod nano (6th generation): Hardware troubleshooting
    Changed the watch face to display.
    Recharged the device overnight (without full discharge).
    Since none of this works I'm out of ideas. Eventhough I have a 6G Nano it should no longer be under warranty since I was sent it as a replacement for a different (older) product.
    Any ideas? Is this a known problem? Thanks in advance for any insight any of you could provide. Also, what time is it??
    Regards,

    Hey,
    I have the exact same problem as you have described. I also used my ipod as a watch but starting from today, whenever I unlock it the screen turns white until a reset is done. Even a factory reset through itunes didn't fix it.
    Have you found any solution?
    Bah, this is annoying.
    //Gubbar

  • IPod Classic's screen when connecting to ITunes

    With my IPod Classic 80GB with displying time on the menu, when connecting(Syncing) to ITunes, where time was displyed on the top grey line like 8:20PM for example, it turns into a meaningless letter 'P'.
    If the time is like 8:20AM, no such letter will appear on this grey line.
    Is this for everyone's ipod classics? Or only mines stuffed.
    No fault on its functions, but curious if this is just a stuff up by Apple.
    Your yes/no is much appreciated.
    Thanks.
    Message was edited by: Jase221

    I'm seeing the same here, too. Letter "P" on top of the screen when connected to iTunes.
    I will see if turning off the clock in the display or switching to 24hour time works. Hadn't noticed if connected in the AM makes a difference since I usually synch up at night in the PM.
    The iPod seems to operate just fine otherwise.
    Message was edited by: carlosdls

  • In the middel of updateing my IPod the connectione stopd and since then the device is not working. only white screen no connectivity to win or to the Appstore

    In the middel of updateing my IPod the connectione stopd and since then the device is not working. only white screen no connectivity to win or to the Appstore

    Try:
    - iOS: Not responding or does not turn on
    - If not successful and you can't fully turn the iPod fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - If still not successful that indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.

  • My MacBook Pro shows the logo in a white screen when I ask for a Software Update under the apple. Actually it stays blank on Featured, Top Charts, Categories and Purchases as well. What up? Thanks.

    My MacBook Pro shows the logo in a white screen when I ask for a Software Update under the apple. Actually it stays blank on Featured, Top Charts, Categories and Purchases as well. What up? Thanks.

    I am having exactly the same problem right now. After some research, it looked like my HD was toast. I replaced it today, that part was easy, but now I cannot seem to use my original Install Disk to format the new HD. I get a grey restart screen, or if I get to the Language Selection screen, my cursor is frozen in left corner and I can't use it.
    Very frustrating, hope someone else has some ideas!
    PS My MacBook was about same age, and "expired" in exactly the same way as yours.

  • I can't open swf files for schoolwork. Installed VCL, Flip4Mac and Adobe flash and shockwave players. Can get white screen with connection erro message with adobe flash player. Help me!

    i can't open swf files for schoolwork. Installed VCL, Flip4Mac and Adobe flash and shockwave players. Can get white screen with connection erro message with adobe flash player. Help me!

    Apple dropped playback support for .swf formats in QuickTime almost ten years ago.
    Adobe Flash Player is the only way to view them.

  • White screen when I open itunes

    Upgraded to iTunes 10.5 and get white screen when I open iTunes on computer with Windows 7.

    Whitescreen is easy to fix in the security settings of Safari! Allow Cookies - other Apps will also work, like BankingApps...
    Whitescreen in iTunesStore App @ iOS7 fixed in den Sicherheitseinstellungen von Safari. Einfach "Cookies erlauben". Andere Apps funktionieren dann auch zB Online Banking
    thx2max

  • White screen when turn ipod touch on...help

    There is a white screen when I turn my iPod touch on.   please help

    Try:
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try on another computer
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar       

  • I have a bright white screen when turning on my ipod nano 7th gen.  Have tried resetting etc etc. Any further ideas?

    I have a bright white screen when turning on my nano 7th gen. Have tried resetting and restoring settings - no change. Any ideas please?

    Hello pipworms,
    I would be concerned too if my iPod nano's was just showing a white screen.  I recommend following the steps below:
    Display shows a white screen
    Try putting the iPod into disk mode:
    Reset the device (Reset the device by pressing the Sleep and Home buttons simultaneously until the display shows the Apple logo. This should take about eight seconds).
    When the Apple logo appears, press and hold the Volume Down and Volume Up buttons simultaneously until the device enters Disk Mode.
    While the device is in disk mode, sync it to iTunes and try to restore.
    I got this information from the following article for the 6th generation iPod nano.  The steps are the same, except I updated the reset steps with the reset for the 7th generation iPod nano:
    iPod nano (6th generation): Hardware troubleshooting
    http://support.apple.com/kb/ts3474
    How to reset iPod
    http://support.apple.com/kb/ht1320
    Putting iPod into Disk Mode
    http://support.apple.com/kb/HT1363
    Thank you for using Apple Support Communities.
    Best,
    Sheila M.

Maybe you are looking for

  • How to track transfer rule / transformation changes (in source code)?

    Hi all, let's say i add a routine to a transfer rule and i transport the change request to production, there's a way to know after that what was changed doing a comparison between the two source codes? Also, in the change request i have in this case

  • Using Sql monitor in Oracle SqlDeveloper

    Hi , i tried to use SQL Monitor in Oracle SqlDeveloper but it says "i need to register the oracle " is there any other way to use it ? thank u

  • EXCEPTION_FLT_STACK_CHECK in jre1.6.0_01 with JNI

    I have developed an application to manage a note acceptor. The manufacturer provided me a dll to communicate the device but my application is written in Java, so I developed the corresponding JNI to send the commands and obtain the answers. On the ot

  • How do i reimport missing media

    While importing media files to FC, some of the files did not import correctly. How can I re-import only those files? Is there a way to batch import the missing media files if I select them?

  • Solaris containers + sun ray server

    just some theoretical question... would it be possible to put a sun-ray session into a solaris container, stop it, move it to some other machine, and restart it there? never played with containers and maybe i am compleatly wrong here...