White screen when I open laptop

When I close my Laptop at night, I'm having a problem the next morning.  Almost every night, I close the MacBook, don't turn it off, then next morning when I open it, I can see the screen, but there is a white screen over it.  I can hear what seems to be the disk drive start, then the laptop finally starts, slowly.  The mouse and/or mouse pad don't want to work at first, then decide to start up.  What's up with this???

Is the battery completely dead or does it just have a low capacity (meaning it doesn't last very long if you use the laptop on battery power)?
Sounds to me like you're seeing Safe Sleep. Does the image in this article look familiar?
http://support.apple.com/kb/HT1757?viewlocale=en_US
~Lyssa

Similar Messages

  • I have a new ipad and everything works but can't connect to the app store. Itunes works and the wifi seems to be working but i get a blank white screen when i open the appstore.Nothing will load unter the features or charts tab. Any Suggestions?

    I have a new ipad and everything works but can't connect to the app store. Itunes works and the wifi seems to be working but i get a blank white screen when i open the appstore. Nothing will load unter the features or charts tab so i cant download any apps. Purchased and updates tab loads fine. Any suggestions?

    You would get better response from the iTunes community forum.
    Have a nice day!

  • White screen when I open itunes

    Upgraded to iTunes 10.5 and get white screen when I open iTunes on computer with Windows 7.

    Whitescreen is easy to fix in the security settings of Safari! Allow Cookies - other Apps will also work, like BankingApps...
    Whitescreen in iTunesStore App @ iOS7 fixed in den Sicherheitseinstellungen von Safari. Einfach "Cookies erlauben". Andere Apps funktionieren dann auch zB Online Banking
    thx2max

  • Firefox give me a blank white screen when i open it and when i type in an address in the search bar it just say new tab on the top left hand corner and its cont. to be a blank white page. IDK?

    k when i double click on the fire fox short cut on my desk top or the tab under the start button, my firefox gives me a blank white screen with the phase " new tab" on the top left hand corner as if u clicked for another window. Even though its the 1st window that opens. when i type a website in the search bar it regristers but it just goes to the blank white screen w the new tab phase. i tried to open some of my bookmark sites and still the same thing.. a blank all white page. ive tried re-download the fire fox 6.0 then i deleted my current firefix then re-downloaded it again.. still nothing :(. im currently usaing my interner explore to write this and search the net.

    Hello,
    The Reset Firefox feature can fix many issues by restoring Firefox to its factory default state while saving your essential information. <br>
    '''Note''': ''This will cause you to lose any Extensions and some Preferences.''
    *Open websites will not be saved in Firefox versions lower than 25.
    To Reset Firefox do the following:
    #Go to Firefox > Help > Troubleshooting Information.
    #Click the "Reset Firefox" button.
    #Firefox will close and reset. After Firefox is done, it will show a window with the information that is imported. Click Finish.
    #Firefox will open with all factory defaults applied.
    Further information can be found in the [[Reset Firefox – easily fix most problems]] article.
    Did this fix your problems? Please report back to us!
    Thank you.

  • My creative cloud app comes up with a white screen when I open it

    when i open my creative cloud app it goes straight to a white screen. i am trying to use photoshop but it doesnt do anything in the app. any suggestions?

    Sign in, activation, or connection errors | CS5.5 and later
    Mylenium

  • White screen when i open my computer

    My battery is bad in my laptop so i have to continually run off of the power cord. when i close my computer and the unplug it to move to another room, and i plug it back in, i get this white screen that is opaque and has a little loading bar at the bottom. does anyone know exactly what this is and how it works? i was under the impression that it would restart every time i unplug the power cord.

    Is the battery completely dead or does it just have a low capacity (meaning it doesn't last very long if you use the laptop on battery power)?
    Sounds to me like you're seeing Safe Sleep. Does the image in this article look familiar?
    http://support.apple.com/kb/HT1757?viewlocale=en_US
    ~Lyssa

  • White screen when I turn the Satellite M50 on

    I intermittently just get a white screen when I turn the computer on. Usually the problem is solved by switching the computer off and trying again - but sometimes I get a white screen again.
    It seems to be connected to use of external devices - can anyone give me clear instructions about what should/should not be connected when I start and shut down the computer? Or any other suggested solutions?
    Thanks

    Thanks for your reply/advice - and the tip about Antivir. I used to use AVG and then Norton came as a package with this laptop....will have a re-think when my subscription need renewing.
    I have updated the display/graphics driver but am still having the same problem of a white screen at boot-up. On reflection I think it is possibly a loose connection as I have just been a long trip with the laptop - including a fairly bumpy 4 hour bus ride - and I recall having the same problem several months ago which self-corrected after a similar trip (taking it down to a Toshiba ASP who never saw it as they were closed for the week-end and I had to get back to work!). This may sound strange but I took the laptop for a walk yesterday to see if any loose connection would shift and it then booted up on the second attempt rather than the 8th!
    I guess I'll have to take it to the ASP - unfortunately it's no longer under warranty.
    EDIT:
    Problem solved. High temperature caused this issue
    http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=23402

  • I get a white screen when I try to enter iTunes Store

    I get a white screen when i enter the iTunes store. The toolbar on the left is OK. The top is OK. It doesn't crash or anything, and I am logged in when I do it.

    If you're seeing a blank iTunes Store, you could try resetting Winsock. That's fixed the problem for some people. 
    Click on your Start menu, go to accessories, and click the Command Prompt icon. Once it opens, type in the following command...  
    netsh winsock reset  
    Press Enter and it should say something like "winsock reset successful:
    Then reboot your computer and try the iTunes Store again.
    Hope this helps.

  • Why does my Mac stay on the white screen when I turn it on?

    Why does my Mac stay on white screen when I turn it on?

    Take each of these steps that you haven't already tried. Stop when the problem is resolved.
    Step 1
    The first step in dealing with a boot failure is to secure your data. If you want to preserve the contents of the startup drive, and you don't already have at least one current backup, you must try to back up now, before you do anything else. It may or may not be possible. If you don't care about the data that has changed since your last backup, you can skip this step.   
    There are several ways to back up a Mac that is unable to boot. You need an external hard drive to hold the backup data.
         a. Boot into the Recovery partition, or from a local Time Machine backup volume (option key at startup.) When the OS X Utilities screen appears, launch Disk Utility and follow the instructions in this support article, under “Instructions for backing up to an external hard disk via Disk Utility.”
    b. If you have access to a working Mac, and both it and the non-working Mac have FireWire or Thunderbolt ports, boot the non-working Mac in target disk mode. Use the working Mac to copy the data to another drive. This technique won't work with USB, Ethernet, Wi-Fi, or Bluetooth.
    c. If the internal drive of the non-working Mac is user-replaceable, remove it and mount it in an external enclosure or drive dock. Use another Mac to copy the data.
    Step 2
    Sometimes a boot failure can be resolved by resetting the NVRAM.
    Step 3
    If there's a built-in optical drive, a disc may be stuck in it. Follow these instructions to eject it.
    Step 4
    Press and hold the power button until the power shuts off. Disconnect all wired peripherals except those needed to boot, and remove all aftermarket expansion cards. Use a different keyboard and/or mouse, if those devices are wired. If you can boot now, one of the devices you disconnected, or a combination of them, is causing the problem. Finding out which one is a process of elimination.
    If you've booted from an external storage device, make sure that your internal boot volume is selected in the Startup Disk pane of System Preferences.
    Step 5
    Boot in safe mode. Note: If FileVault is enabled on some models, or if a firmware password is set, or if the boot volume is a software RAID, you can’t do this. Post for further instructions.
    Safe mode is much slower to boot and run than normal, and some things won’t work at all, including wireless networking on certain Macs.
    The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
    When you boot in safe mode, it's normal to see a dark gray progress bar on a light gray background. If the progress bar gets stuck for more than a few minutes, or if the system shuts down automatically while the progress bar is displayed, your boot volume is corrupt and the drive is probably malfunctioning. In that case, go to Step 6.
    If you can boot and log in now, empty the Trash, and then open the Finder Info window on your boot volume ("Macintosh HD," unless you gave it a different name.) Check that you have at least 9 GB of available space, as shown in the window. If you don't, copy as many files as necessary to another volume (not another folder on the same volume) and delete the originals. Deletion isn't complete until you empty the Trash again. Do this until the available space is more than 9 GB. Then reboot as usual (i.e., not in safe mode.)
    If the boot process hangs again, the problem is likely caused by a third-party system modification that you installed. Post for further instructions.
    Step 6
    Launch Disk Utility in Recovery mode (see Step 1.) Select your startup volume, then run Repair Disk. If any problems are found, repeat until clear. If Disk Utility reports that the volume can't be repaired, the drive has malfunctioned and should be replaced. You might choose to tolerate one such malfunction in the life of the drive. In that case, erase the volume and restore from a backup. If the same thing ever happens again, replace the drive immediately.
    This is one of the rare situations in which you should also run Repair Permissions, ignoring the false warnings it may produce. Look for the line "Permissions repair complete" at the end of the output. Then reboot as usual.
    Step 7
    Reinstall the OS. If your Mac was upgraded from an older version of OS X, you’ll need the Apple ID and password you used to upgrade.
    Step 8
    Repeat Step 6, but this time erase the boot volume in Disk Utility before installing. The system should automatically reboot into the Setup Assistant. Follow the prompts to transfer your data from a Time Machine or other backup.
    Step 9
    This step applies only to older Macs (not current models) that have a logic-board ("PRAM") battery. Both desktop and portable Macs used to have such a battery. The logic-board battery, if there is one, is separate from the main battery of a portable. A dead logic-board battery can cause a boot failure. Typically the failure will be preceded by loss of the settings for the startup disk and system clock. See the user manual for replacement instructions. You may have to take the machine to a service provider to have the battery replaced.
    Step 10
    If you get this far, you're probably dealing with a hardware fault. Make a "Genius" appointment at an Apple Store, or go to another authorized service provider.

  • No power when I open laptop.

    No power when I open laptop, I have to remove the battery pack & then replace it & the power comes on so I can sign in. This has happened twice since May when I received it.Why does this happen ? 

    I received it in May, it was manufactured in Feb. It's model # is 2000-2b43dx. Normally I "shut down", once in awhile I put it to sleep. The two times this happened it won't turn on with the power button, but yesterday I could see a real faint light in the screen when I flipped open the lid, but couldn't get it to power on. I took the battery pack out , then when I replaced it, opened it, the power came on. Could something be going wrong with the battery pack already ? I always keep it plugged into  electric & very seldom use it on battery. Thanks for any advice.

  • I downloaded 11.1 but now can't access the store, can only view my library. I've reinstalled but still get a blank, white screen when I try to go to the itunes store. How can I get to the store for purchases?

    I downloaded 11.1 but now can't access the store, can only view my library. I've reinstalled but still get a blank, white screen when I try to go to the itunes store. How can I get to the store for purchases?

    In iTunes prefs>Store - is the Store check box unchecked?
    Did you repair pemissions with Disk Utility?
    MJ

  • What is missing when I get a blank white screen when I try to Access some web sites?

    On some web sites, I get a blank white screen when I try to access them.

    You can try these steps in case of issues with web pages:
    You can reload web page(s) and bypass the cache to refresh possibly outdated or corrupted files.
    *Hold down the Shift key and left-click the Reload button
    *Press "Ctrl + F5" or press "Ctrl + Shift + R" (Windows,Linux)
    *Press "Command + Shift + R" (Mac)
    Clear the cache and remove cookies only from websites that cause problems.
    "Clear the Cache":
    *Firefox/Tools > Options > Advanced > Network > Cached Web Content: "Clear Now"
    "Remove Cookies" from sites causing problems:
    *Firefox/Tools > Options > Privacy > "Use custom settings for history" > Cookies: "Show Cookies"
    Start Firefox in <u>[[Safe Mode|Safe Mode]]</u> to check if one of the extensions (Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem.
    *Switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance
    *Do NOT click the Reset button on the Safe Mode start window
    *https://support.mozilla.org/kb/Safe+Mode
    *https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes

  • Hello all,     I have a 6G iPod Nano that I currently use as my primary watch. A week or so ago I started to experience a blank white screen when I press the "sleep/wake" button instead of the watch face (I have it set to wake from sleep to display the cl

    Hello all,
    I have a 14.88G iPod Nano that I currently use as my primary watch. A week or so ago I started to experience a blank white screen when I press the "sleep/wake" button instead of the watch face (I have it set to wake from sleep to display the clock). When I hard reset it, it will come back fine and the screen will respond and work as normal, as soon as I manually put it to sleep by pressing the "sleep/wake" button and then try to wake it the same thing happens and I have a blank white screen that doesn't respond to touch gestures or anything.
    What I have tried so far to no avail:
    Numerous hard restarts (holding the "sleep/wake" button with the volume - button).
    Tried this: iPod nano (6th generation): Hardware troubleshooting
    Changed the watch face to display.
    Recharged the device overnight (without full discharge).
    Since none of this works I'm out of ideas. Eventhough I have a 6G Nano it should no longer be under warranty since I was sent it as a replacement for a different (older) product.
    Any ideas? Is this a known problem? Thanks in advance for any insight any of you could provide. Also, what time is it??
    Regards,

    Hey,
    I have the exact same problem as you have described. I also used my ipod as a watch but starting from today, whenever I unlock it the screen turns white until a reset is done. Even a factory reset through itunes didn't fix it.
    Have you found any solution?
    Bah, this is annoying.
    //Gubbar

  • Hi, I have this green mark (with pointing arrow looks like a link) on some words show on my window screen when I open a web page, I wonder if it is a virus link or such. Need help how to get rid of it. Thanks

    Hi, I have this green mark (with pointing arrow looks like a link) on some words show on my window screen when I open a web page, I wonder if it is a virus link or such. Need help how to get rid of it. Here's the example:
    WING
    GAMES
    MAJORITY
    Thanks

    If the third link you posted (the link containing the word "majority") does not look like the following then you inadvertently installed adware.
    That particular page should resemble the following:
    The word "majority" in the third paragraph should not be a link and should not have the green icon associated with it.
    To learn how this may have occurred, and how to prevent it from occurring in the future, read How to install adware
    Most so-called "news" websites are nothing more than entertainment outlets that cater to prurient interests, and contain advertisements that leave the user about three clicks away from installing junk. If you decide to frequent those websites, Safari's "Reader" feature helps minimize that exposure.
    Try it:

  • Why do i get a black screen when i open a pdf file?

    why do I get a black screen when I open a pdf file?

    I'm seeing the same thing, as well as "zombie" AcroRd32.exe *32 processes.
    (I'm seeing this on Windows 7, not Windows 8.)

Maybe you are looking for

  • How to schedule a print job.

    OBIEE 10.3.4.1 on Redhat. We wish to schedule Answers and Publisher to print a certain report on a specific print. Can OBIEE do that? Thanks.

  • HBOGO Airplay Closed Captions not working?

    I have an iPad2 and an AppleTV3. HBOGO Closed Captions works fine on my iPad. As soon as I airplay it to my AppleTV, however, the CC disappear even as I toggle them on and off on the iPad. While holding down on the AppleTV remote's center button usua

  • Export Problem: GB exports a file...but it's empty!

    I've got a 60 minute interview on one track that I'm trying to export. Regardless if I export it to disc, iTunes, compressed or not, the exported results are a 4KB file that is empty and lasts zero seconds upon playback. I've tried shortening the nam

  • AM Validation Exception - Deadline looming - Please help!

    Gurus, I am trying to perform validation in AM against data already existing in underlying table. Since my EOImpl is utilizing API calls for insert/update/delete with OAPlsqlEntityImpl ... I cannot enforce uniqueness in EO attributes. Therefore, I am

  • Mac osx 10.5.8 to 10.6.8v

    I have a mac osx 10.5.8, is it available for a free update to 10.6v? any solotions for me to connect my new iphone5 to my current mac osx 10.5.8?