White Screen when Video Plays

I am using Premiere Elements 9 software.  When i add clips to the timeline and hit play, the video does not play in playback screen, instead i just get a white screen.  Once i hit the puase button, the picture of the frame the playerhead is on goes back onto the screeen, but as soon as i hit the play button, the screen turns white again.  I have updated my graphics card drivers and the prject settings are correct.  What is causeing the issue?
This is what i get when i hit the play button:
tim

Thank you for that info. You have got a pretty recent (did not check, but that might be the latest) video driver. I sort of expected to see a date about 6 - 8 mos. ago. If there IS a newer driver, I would definitely try that. Also, as over the years, both nVidia and ATI/AMD have issued drivers, that were just bad with Adobe programs, I keep older (known good) drivers on my HDD, just in case I have to roll-back.
Do you have a Dell, HP, Lenovo or Toshiba computer? The reason that I ask is that those companies very often re-wrap the nVidia (and ATI/AMD) drivers, to work with their tweaked hardware.
With the latest video driver, and that Canon footage, if you have the proper Project Preset, things should edit fine. The smoothness of editing/playback will be heavily dependent on your CPU's speed, but should not affect the display.
Good luck,
Hunt

Similar Messages

  • White Screen when "video" chatting with PC

    My friend is running AIM 5.9 on Windows XP and when I try to video chat with her, all she sees is a white screen, but still can hear me. I have rebooted my computer, and so has she. We used to not be able to connect at all, but she rebooted and now she can hear me.
    What should I do?

    Hi Brendon,
    What has she done to set up AIM on her end ?
    Has she enabled it though her XP firewall ?
    Has she enable the ports AIM needs in her modem ?
    8:38 PM Tuesday; December 19, 2006

  • Bright white screen when video is paused.

    Hello All,
    I've looked everywhere for a solution to this problem and there has been no previous discussion. Basically, whenever the Video is paused, instead of the paused frame being shown, there is a bright white screen. It is worth nothing that this issue happens when I use the Darwin Streaming server. If I serve the video using IIS, the issue is not present.
    This issue using the  Quicktime plugin is present in Chrome, Firefox, Safari, and IE.
    If someone could push me in the right direction, it would be greatly appreciated.
    Thanks.

    Hi Brendon,
    What has she done to set up AIM on her end ?
    Has she enabled it though her XP firewall ?
    Has she enable the ports AIM needs in her modem ?
    8:38 PM Tuesday; December 19, 2006

  • HD Playback White Screen - No Video Playing

    My NTSC-AVCHD-Full HD 1080i 30 does not play my HD videos in workspace or preview mode.  I do hear sound, but only get white in the display area.  ANy ideas why this is happening?  I had to re-install after using it great for 2 years.  I have an i5-2500K, NVIDIA 560 Ti and 16 GB RAM.

    More information needed for someone to help... please click below and provide the requested information
    -Premiere Elements FAQ http://forums.adobe.com/thread/1042180
    What is your exact brand/model graphics adapter (ATI or nVidia or ???)
    What is your exact graphics adapter driver version?
    Have you gone to the vendor web site to check for a newer driver?
    -If Windows, do NOT rely on Windows Update to have current driver information
    -you need to go direct to the vendor web site and check updates for yourself
    nVidia Driver Updates http://www.nvidia.com/Download/index.aspx?lang=en-us
    Exactly what are you editing?
    Codec & Format information, with 2 links inside to read
    -read both links in reply #1 http://forums.adobe.com/thread/1270588
    Report back with the codec details of your file, use the programs below... A screen shot works well to SHOW people what you are doing
    http://forums.adobe.com/thread/592070?tstart=30
    For PC http://mediainfo.sourceforge.net/en or http://www.headbands.com/gspot/
    For Mac http://mediainspector.massanti.com/

  • White Screen When Streaming .MOV videos

    Hey everyone -
    Any thoughts as to why I'm seeing a white screen (no video) and audio when streaming a .mov file from a website?
    The computer in question has Quicktime 7.7.2, plugin is enabled and is running Windows XP SP3.
    I've tried removing and reinstalling Quicktime, upgrading to 7.7.3 and downgrading to 7.7.1 - no change.
    The issue persists using Firefox, IE 8 and Chrome.
    I can play the video fine on my MacBook Pro (running Lion) and on another Windows workstation - different PC model but everything else is the same.
    Any troubleshooting suggestions would be fabulous.
    ~Lyssa

    Went through and disabled any plugins that could be grabbing it & no joy...I can get it working on another PC that is absolutely identical (same graphics card, software installs & network configuration).  Most puzzling!
    I think we'll just download the videos from this point forward and try the plugin periodically; eventually it'll start working again.
    Thanks for your help!
    ~Lyssa

  • Getting Green Screen when I play Videos on my HP Pavilion 15

    keeping getting a green screen when i play videos on my HP Pavilion 15, product # J1J16UA#ABA, Window 8.1 64 bit.

    Hello jkgossjr, welcome to the HP Forums.
    I see that the screen on your notebook is green when trying to watch videos. I will try to help you with this.
    Start with this document: Display Quality Issues.
    Let me know how this goes for you.
    Thank you for posting on the HP Forums.
    I worked on behalf of HP.

  • I downloaded 11.1 but now can't access the store, can only view my library. I've reinstalled but still get a blank, white screen when I try to go to the itunes store. How can I get to the store for purchases?

    I downloaded 11.1 but now can't access the store, can only view my library. I've reinstalled but still get a blank, white screen when I try to go to the itunes store. How can I get to the store for purchases?

    In iTunes prefs>Store - is the Store check box unchecked?
    Did you repair pemissions with Disk Utility?
    MJ

  • What is missing when I get a blank white screen when I try to Access some web sites?

    On some web sites, I get a blank white screen when I try to access them.

    You can try these steps in case of issues with web pages:
    You can reload web page(s) and bypass the cache to refresh possibly outdated or corrupted files.
    *Hold down the Shift key and left-click the Reload button
    *Press "Ctrl + F5" or press "Ctrl + Shift + R" (Windows,Linux)
    *Press "Command + Shift + R" (Mac)
    Clear the cache and remove cookies only from websites that cause problems.
    "Clear the Cache":
    *Firefox/Tools > Options > Advanced > Network > Cached Web Content: "Clear Now"
    "Remove Cookies" from sites causing problems:
    *Firefox/Tools > Options > Privacy > "Use custom settings for history" > Cookies: "Show Cookies"
    Start Firefox in <u>[[Safe Mode|Safe Mode]]</u> to check if one of the extensions (Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem.
    *Switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance
    *Do NOT click the Reset button on the Safe Mode start window
    *https://support.mozilla.org/kb/Safe+Mode
    *https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes

  • I have a new ipad and everything works but can't connect to the app store. Itunes works and the wifi seems to be working but i get a blank white screen when i open the appstore.Nothing will load unter the features or charts tab. Any Suggestions?

    I have a new ipad and everything works but can't connect to the app store. Itunes works and the wifi seems to be working but i get a blank white screen when i open the appstore. Nothing will load unter the features or charts tab so i cant download any apps. Purchased and updates tab loads fine. Any suggestions?

    You would get better response from the iTunes community forum.
    Have a nice day!

  • Hello all,     I have a 6G iPod Nano that I currently use as my primary watch. A week or so ago I started to experience a blank white screen when I press the "sleep/wake" button instead of the watch face (I have it set to wake from sleep to display the cl

    Hello all,
    I have a 14.88G iPod Nano that I currently use as my primary watch. A week or so ago I started to experience a blank white screen when I press the "sleep/wake" button instead of the watch face (I have it set to wake from sleep to display the clock). When I hard reset it, it will come back fine and the screen will respond and work as normal, as soon as I manually put it to sleep by pressing the "sleep/wake" button and then try to wake it the same thing happens and I have a blank white screen that doesn't respond to touch gestures or anything.
    What I have tried so far to no avail:
    Numerous hard restarts (holding the "sleep/wake" button with the volume - button).
    Tried this: iPod nano (6th generation): Hardware troubleshooting
    Changed the watch face to display.
    Recharged the device overnight (without full discharge).
    Since none of this works I'm out of ideas. Eventhough I have a 6G Nano it should no longer be under warranty since I was sent it as a replacement for a different (older) product.
    Any ideas? Is this a known problem? Thanks in advance for any insight any of you could provide. Also, what time is it??
    Regards,

    Hey,
    I have the exact same problem as you have described. I also used my ipod as a watch but starting from today, whenever I unlock it the screen turns white until a reset is done. Even a factory reset through itunes didn't fix it.
    Have you found any solution?
    Bah, this is annoying.
    //Gubbar

  • My MacBook Pro shows the logo in a white screen when I ask for a Software Update under the apple. Actually it stays blank on Featured, Top Charts, Categories and Purchases as well. What up? Thanks.

    My MacBook Pro shows the logo in a white screen when I ask for a Software Update under the apple. Actually it stays blank on Featured, Top Charts, Categories and Purchases as well. What up? Thanks.

    I am having exactly the same problem right now. After some research, it looked like my HD was toast. I replaced it today, that part was easy, but now I cannot seem to use my original Install Disk to format the new HD. I get a grey restart screen, or if I get to the Language Selection screen, my cursor is frozen in left corner and I can't use it.
    Very frustrating, hope someone else has some ideas!
    PS My MacBook was about same age, and "expired" in exactly the same way as yours.

  • White screen when I open itunes

    Upgraded to iTunes 10.5 and get white screen when I open iTunes on computer with Windows 7.

    Whitescreen is easy to fix in the security settings of Safari! Allow Cookies - other Apps will also work, like BankingApps...
    Whitescreen in iTunesStore App @ iOS7 fixed in den Sicherheitseinstellungen von Safari. Einfach "Cookies erlauben". Andere Apps funktionieren dann auch zB Online Banking
    thx2max

  • White screen when I turn the Satellite M50 on

    I intermittently just get a white screen when I turn the computer on. Usually the problem is solved by switching the computer off and trying again - but sometimes I get a white screen again.
    It seems to be connected to use of external devices - can anyone give me clear instructions about what should/should not be connected when I start and shut down the computer? Or any other suggested solutions?
    Thanks

    Thanks for your reply/advice - and the tip about Antivir. I used to use AVG and then Norton came as a package with this laptop....will have a re-think when my subscription need renewing.
    I have updated the display/graphics driver but am still having the same problem of a white screen at boot-up. On reflection I think it is possibly a loose connection as I have just been a long trip with the laptop - including a fairly bumpy 4 hour bus ride - and I recall having the same problem several months ago which self-corrected after a similar trip (taking it down to a Toshiba ASP who never saw it as they were closed for the week-end and I had to get back to work!). This may sound strange but I took the laptop for a walk yesterday to see if any loose connection would shift and it then booted up on the second attempt rather than the 8th!
    I guess I'll have to take it to the ASP - unfortunately it's no longer under warranty.
    EDIT:
    Problem solved. High temperature caused this issue
    http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=23402

  • White screen when turn ipod touch on...help

    There is a white screen when I turn my iPod touch on.   please help

    Try:
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try on another computer
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar       

  • I have a bright white screen when turning on my ipod nano 7th gen.  Have tried resetting etc etc. Any further ideas?

    I have a bright white screen when turning on my nano 7th gen. Have tried resetting and restoring settings - no change. Any ideas please?

    Hello pipworms,
    I would be concerned too if my iPod nano's was just showing a white screen.  I recommend following the steps below:
    Display shows a white screen
    Try putting the iPod into disk mode:
    Reset the device (Reset the device by pressing the Sleep and Home buttons simultaneously until the display shows the Apple logo. This should take about eight seconds).
    When the Apple logo appears, press and hold the Volume Down and Volume Up buttons simultaneously until the device enters Disk Mode.
    While the device is in disk mode, sync it to iTunes and try to restore.
    I got this information from the following article for the 6th generation iPod nano.  The steps are the same, except I updated the reset steps with the reset for the 7th generation iPod nano:
    iPod nano (6th generation): Hardware troubleshooting
    http://support.apple.com/kb/ts3474
    How to reset iPod
    http://support.apple.com/kb/ht1320
    Putting iPod into Disk Mode
    http://support.apple.com/kb/HT1363
    Thank you for using Apple Support Communities.
    Best,
    Sheila M.

Maybe you are looking for

  • How Do I Sort Events by Event File Name?

    Hi All, Searched the forums extensively and can't seem to find anything on point. I'm trying to sort my events in iMovie appropriately and it's a challenge. Some of my events are recent, imported digital videos. Others are old VHS videos from the 80s

  • Do Browserlab generate automated results or is only effective for screenshots?

    Hi.. 1) We are looking for cross browser test tool for our project which can  facilitate comparison of layout difference in different browsers, image, text differences and provide consolidate results without manual intervention. Would like to know wh

  • Updation of Value Mapping Table

    Hello All, Is there any way in we can update a value mapping table, from some external source, permanently in the ID and not only in the cache. Please do respond. Thanks Neetu

  • Smtp sender restrictions question

    I have the following in my main.cf file for sender restrictions. permitsasl_authenticated,permit_mynetworks,rejectn onfqdnsender,permit Seems pretty standard, but I have had some students in my district send emails to teachers as [email protected] No

  • Upgrade to Premiere Pro CS6 from my Creative Suite 5 Production Premium

    I am trying to upgrade to Premiere Pro CS& from my Creative Suite 5 Production Premium but the Serial Number for my Creative Suite 5 Production Premium is NOT accepted as a valid Serial Number to upgrade from.