White Screen which goes of when connected to laptop!

hi all,
My BB curve 8520 is stuck with a white screen and it only comes back to life when its connected to the laptop.
The solution posted in another thread was to use the APPLICATION LOADER WIZARD.
but i cant seem to do so. As the drop down "Connection" menu, is just blank.
When i doconnect it to the laptop- everything comes back to view and the battery life seems normal. everything functions well.
When i remove it and start to use it even for 5 mins- this MUCH HATED white screen appears again.
Ive read that its some sort of shorting behind the screen, that it may be a battery problem, and also one that says its a software problem.
Someone please help! Thanks so much.
Virik

Hi again, Rockmantis
I don't think so. The inverter is the piece of hardware that controls what is shown on the display. If this was bad, then there would be nothing on the display, even with shining light directly on it. But the backlight is what makes the image visible by lighting it up. With this bad, it can sometimes work and then sometimes not, as it is currently for you.
Best,
Adam
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution!" This will help the rest of the community with similar issues identify the verified solution and benefit from it.

Similar Messages

HT4061 I have an iphone 5s, does not boot, blinking white screen with black logo, when trying itunes restore from mac and pc, error code 4013 which is usb error, any ideas?

I have an iphone 5s, does not boot, blinking white screen with black logo, when trying itunes restore from mac and pc, error code 4013 which is usb error, any ideas? Does a totally dead battery have that effect? I have had it plugged in to a computer overnight, but maybe does not charge when totally dead?
Please help, thanks in advance all1

Hi eggroll77,
Welcome to Apple Support Communities.
That alert codes does suggest there is a USB related issue. If you haven’t already, try the troubleshooting suggestions in the article linked below.
iOS: Restore errors 4005, 4013, and 4014
I hope this helps.
-Jason

When FT is full screen, camera goes off when swiping to a different app

When FT is full screen, camera goes off when swipping to a different app or the desktop. This is frustrating to the other person. We were having a discussion and I said I wouls look it up and when I swipped to Safari, the camera went off. It makes the other person think the connection has been lost. Anywhere to report issues like this to Apple?

In reading other threads, I found a few that recommend a hard reset to solve the issue. I have tried it, and thus far haven't expereienced the problem again. Hopefully that's it then

Since upgrading the IOS 8 on my IPad 2 I can longer get a full screen on my TV when connected with an HDMI cable. anything I should change in my settings? Right now my iPad is mirrored on the TV with a black box all around the edge

Since upgrading the IOS 8 on my IPad 2 I can longer get a full screen on my TV when connected with an HDMI cable. anything I should change in my settings? Right now my iPad is mirrored on the TV with a black box all around the edge

I have reached the same conclusion in the mean time. I have done a bit of investgation in to other grahics cards and am seeing some that show SPDIF connections from the card to the mother board. I was not familar with SPDIF but it did a little bit of sluething. It is of course a digitally enconded voice. I am guessing that in that case the mother board ( assuming it supports this hardware option) would use this output and be able to translate that digital audio to its other audio outputs. That is a lot of guessing of course. I think my "solution" might be a whole new desktop - a rather drastic course of action! I was in the proceess of getting ready to upgrade this machine anyway with a new graphics card (which I will now return), go to Win 7, and maybe even a new digital TV reciever, and I don't want to throw good money after bad anyway.
Thanks for your comments

I just jazzed up my 2 Ghz iMac with 10.6.8, and 4 gigs of memory. I'm VERY happy with the results (fast!), but now I have a thin yellow line way over on the right side of the screen, which goes from top to bottom. This is really strange! Any input?

I'm VERY happy with the results (fast!). However, the really strange thing is this - there is now a thin yellow line, way over on the right side of the screen, which goes from top to bottom, and stays there no matter where I go or what I do. I've never seen anything like this! It was not there before I did the upgrades. Anyone out there ever heard of such a preposterous thing ~ or have any ideas on how to get rid of it?

Hello Mark,
It's going to mean a lot of reading but you should study the 'More like this' legend to your post's immediate right. >>>>>>>> plus some of the links within each.
The problem is well explored with much guidance on what to do and where to go.

How to turn off screen on Macbook Air when connected to Computer LeD monitor?

How to turn off screen on Macbook Air when connected to Led monitor screen?

The only way you can turn it off is to close the lid - so you would need an external wired or wireless keyboard and mouse/trackpad attached.
Matt

My imac starts with a white screen, then goes black and a small white line just blinks in the top left corner of the screen?

My imac starts with a white screen, then goes to black with a small white line blinking in the top left corner of the screen. Any ideas? Thanks.

Try starting your iMac with the original DVD that came with the machine then launch disk utility to repair your hard drive.

Just tried setting up bootcamp on MacPro. Computer now boots to white screen before going to black screen with curser in upper left corner. Can anyone get me back to Mac operating system so I can start over again?

Just tried setting up bootcamp on 2014 MacPro 13" laptop. Computer now boots to white screen before going to black screen with curser in upper left corner. Can anyone get me back to Mac operating system so I can start over again?

Hi there rjr25350,
You may find the information in the article below helpful.
Boot Camp: Windows installation boots to black screen with blinking cursor
http://support.apple.com/kb/TS4536
-Griff W.

I dropped my iphone 3gs now it goes on when connected with a charger but battery show 0% battery. as soon as i disconnect the charger the phone goes off....

I dropped my iphone 3gs now it goes on when connected with a charger but battery show 0% battery. as soon as i disconnect the charger the phone goes off....

Your the one saying it won't work properly, so yes it is broken.

Ipad wont charge when connected to laptop but charges when connected to wall outlet

ipad wont charge when connected to laptop but charges when connected to wall outlet

The quickest way (and really the only way) to charge your iPad is with the included 10W or 12W (5W on Mini) USB Power Adapter. iPad will also charge, although more slowly, when attached to a computer with a high-power USB port (many recent Mac computers) or with an iPhone Power Adapter (5W). When attached to a computer via a standard USB port (2.5W, most PCs or older Mac computers) iPad will charge very slowly (but iPad indicates not charging). Make sure your computer is on while charging iPad via USB. If iPad is connected to a computer that’s turned off or is in sleep or standby mode, the iPad battery will continue to drain.
Apple recommends that once a month you let the iPad fully discharge & then recharge to 100%.
How to Calibrate Your Mac, iPhone, or iPad Battery
http://www.macblend.com/how-to-calibrate-your-mac-iphone-or-ipad-battery/
At this link http://www.tomshardware.com/reviews/galaxy-tab-android-tablet,3014-11.html , tests show that the iPad 2 battery (25 watt-hours) will charge to 90% in 3 hours 1 minute. It will charge to 100% in 4 hours 2 minutes. The new iPad has a larger capacity battery (42 watt-hours), so using the 10W charger will obviously take longer. If you are using your iPad while charging, it will take even longer. It's best to turn your new iPad OFF and charge over night. Also look at The iPad's charging challenge explained http://www.macworld.com/article/1150356/ipadcharging.html
Also, if you have a 3rd generation iPad, look at
Apple: iPad Battery Nothing to Get Charged Up About
http://allthingsd.com/20120327/apple-ipad-battery-nothing-to-get-charged-up-abou t/
Apple Explains New iPad's Continued Charging Beyond 100% Battery Level
http://www.macrumors.com/2012/03/27/apple-explains-new-ipads-continued-charging- beyond-100-battery-level/
New iPad Takes Much Longer to Charge Than iPad 2
http://www.iphonehacks.com/2012/03/new-ipad-takes-much-longer-to-charge-than-ipa d-2.html
Apple Batteries - iPad http://www.apple.com/batteries/ipad.html
Extend iPad Battery Life (Look at pjl123 comment)
https://discussions.apple.com/thread/3921324?tstart=30
New iPad Slow to Recharge, Barely Charges During Use
http://www.pcworld.com/article/252326/new_ipad_slow_to_recharge_barely_charges_d uring_use.html
Best Practices for iPad Battery Charging
http://www.ilounge.com/index.php/articles/comments/best-practices-for-ipad-batte ry-charging/
Tips About Charging for New iPad 3
http://goodscool-electronics.blogspot.com/2012/04/tips-about-charging-for-new-ip ad-3.html
How to Save and Prolong the battery life of your new ipad
https://discussions.apple.com/thread/4480944?tstart=0
Prolong battery lifespan for iPad / iPad 2 / iPad 3: charging tips
http://thehowto.wikidot.com/prolong-battery-lifespan-for-ipad
iPhone, iPod, Using the iPad Charger
http://support.apple.com/kb/HT4327
Install and use Battery Doctor HD
http://itunes.apple.com/tw/app/battery-doctor-hd/id459702901?mt=8
To Extend a Device’s Battery Life, Get to Know It Better
http://tinyurl.com/b67c7xz
iPad Battery Replacement
http://www.apple.com/batteries/replacements.html
In rare instances when using the Camera Connection Kit, you may notice that iPad does not charge after using the Camera Connection Kit. Disconnecting and reconnecting the iPad from the charger will resolve this issue.
 Cheers, Tom

My apple mac's screen is black, when i try to turn it back on then off again it flashs with a white screen then goes back to black. It's as if it thinks when the screen is open it is closed and when it's closed it's open, can anyone help me!!!

When i open my laptop the screen just stays black, i have tried turning it on an back on and it will turn on to the loading white screen and then turn back to black. i have tried calling apple but there tech support is closed on a sunday here in australia. If anyone knows anything i can do please let me know!!!

Try Resetting your Mac's PRAM and NVRAM
If that doesn't help, try Resetting the System Management Controller
-- Those links are currently down for maintenance but should available shortly.

IPod nano 6th generation: "Do not disconnect" on white screen w/flashing icon; previously "Connected-Eject before Disconnecting" on dark screen w/USB icon; no content on iPod

Trouble began with "Reconnect to iTunes to Restore" message after I inadvertantly held down the Wake/Sleep button long enough to turn the iPod off before pausing the podcast in progress.
My subseqent actions to try to remedy:
-Restored the iPod
-while Restoring, the rotating circular arrows and "Synchronizing-Do Not Disconnect" screen appeared followed by "Connected-Eject Before Disconnecting"
-when I ejected the iPod and disconnected it, the normal icons showed but there was no content
-Reinstalled the latest iTunes 11.0.3 which I had downloaded previously a few days before my problems began
-Restored iPod again: still said "Connected-Eject before Disconnecting"
-Manually put the iPod into Disk Mode (said to be helpful in troubleshooting): "Do Not Disconnect" on white screen with flashing icon (circle with diagonal line)
-Ejected and disconnected the iPod.
-Reconnected the iPod: same message

You need to either the let the iPod finishing syncing with iTunes, or figure out what application is still using it in the back ground that prevents you from being able to properly eject the device. Just unplugging it from the computer is almost always going to cause issues when it's still in use by iTunes or another application.
So let's connect the device to iTunes one more time and let it finish restoring. Then try syncing a bit of content over to it and wait for it to finish the sync process. Then try to properly eject it from iTunes this time.
B-rock

White screen of death and wont connect to computer

Ok, so today my phone decided to freeze when I tried to unlock it. I tried resetting it by removing the battery and now it gets stuck on a white screen when I turn it on.
After the battery is put back in, the red light comes on for a bit, then the phone loads up and sits on the egg timer for a while before going to a white screen with a yellow light flashing (but that might just be because it needs a charge)
Iv looked around the internet for help and can see that I need to connect it to the desktop manager however my mac wont recognize the phone and all the tutorials I find are for windows. Is there a way to force my computer to recognize it? (bearing in mind I cant access ANYTHING from the phone)
So if anyone could help me answer this question which im sure has been answered thousands of time then I would be extremely greatful!
I hate this phone.

Hi alexonline,
Welcome to BlackBerry Support Community Forums.
Try following this KB article to reload your device software. You may need to allow up to 10 minutes for it to be detected by the Desktop Manager. http://bbry.lv/aPab3B
-FS
Come follow your BlackBerry Technical Team on Twitter! @BlackBerryHelp
Be sure to click Kudos! for those who have helped you.
Click Solution? for posts that have solved your issue(s)!

Preventing iPod touch screen from going blank when iPod's powered.

Hi there, is there anyway (or app) to prevent the iPod touch's screen from going blank/turning off?
This is why I ask...
I often use my iPod touch as my remote, where I choose which of my iMac's iTunes songs to play next and besides I'm always revising/updating the songs' ratings. My iPod has a password to unlock and so, doing what I just said often can be bothersome. I've found out that, if the iPod's own music is playing when connected to the power, the screen never goes blank, it only dims, which is very helpful but, since I'm not listening to the iPod, I always have to turn the iPod's volume all the way down. Also this increments the number of plays to all those songs played back which is something I don't like either and so, again my question is, does anybody know if there is any way or app that, when the iPod's connected to power, only dimmed the screen (but not allow it to go blank)?
Hope you can help.
Thanks.
Jorge...

Go to Settings>General>Auto-Lock and set time to never. If you have a corporate exchange mail account on the iPod that may prevent using never (Never not present).

White Screen on Qosmio G10 when starting

I have an old Qosmio G10 which I bought from a licensed dealer in Beijing about 2 years ago.
After about a year of use at home I discovered that the screen would sometimes turn white when the screen was moved or shaking.
Some days it would work perfectly fine others it wouldnt even start up without going white.
Towards the end the screen would only show a picture when the screen was put in a certain angle.
Now, the screen just goes white the second I turn it on.
Am I looking at a hardware problem here or have there been known to be software problems with some of the similar laptops?
Thanks,
T

Hi buddy,
sounds like the display cable is maybe loose. I would point on a hardware problem, but before sending your machine to an authorized service partner, go to an local computer technician and let him check the cables on the display.
If realigning of the cables does not help then your display is defective and needs to be replaced by an authorized service partner. I dont know how long your warranty is, but if you want anyways send your machine to an service partner, you should visit the following link to find the nearest one in your country:
http://eu.computers.toshiba-europe.com/cgi-bin/ToshibaCSG/generic_content.jsp?service=EU&ID=ASP_SUPPORT

White Screen which goes of when connected to laptop!

Similar Messages

Maybe you are looking for