White screen with confetti on start-up and intermittent black screen . Video card failing?
Is the video card starting to go ? It is an early 2008 Imac . Keeps powering up but white screen with confetti for a few seconds on start-up . Display did also go black for about 5 minutes last week but also came back . I'm thinking video card degradation?
The most common cause is the MLB or GPU.
You can run the AHT (Apple Hardware Test) (http://support.apple.com/kb/ht1509 OR http://support.apple.com/kb/PH11342) and see if that pulls up any results, otherwise, book an appointment online at your local Apple Retail Store free of charge, for a free assessment and diagnosis. (http://www.apple.com/retail/)
Regards,
MiiCK
Similar Messages
-
HP Phoenix Envy 810-209 Black Screen Video Card Fail
So about a month ago I purchased this computer mentioned in the title. A week after purchasing it, I had a problem in which while 10 minutes into playing a game my computer screen would go black and kick into power saving mode, the audio from the game would still back available for a short period then would just start to buzz. I did a clean reboot of my computer and reinstalled everything. Again, after another few weeks the exact same problem would occurr. After doing some research I realized that this computer may infact be designed to fail. This PC comes with an Nvidia GeForce 760 video card which requires a minimum 500w power supply to use; however, the PC only comes with a 460 w power supply. Meaning this PC is designed to fail if I'm not mistaken. If anyone has had a similar issue and found a software work around that would be fantastic!
Although, I am under the impression I purchased a doomed PC from the get go.HP has its video cards made to work with the power supply unit (PSU) installed. Therefore, this should not be a problem. They are not the same as the same series retail card.
What game are you playing? Is it online?
Signature:
HP TouchPad - 1.2 GHz; 1 GB memory; 32 GB storage; WebOS/CyanogenMod 11(Kit Kat)
HP 10 Plus; Android-Kit Kat; 1.0 GHz Allwinner A31 ARM Cortex A7 Quad Core Processor ; 2GB RAM Memory Long: 2 GB DDR3L SDRAM (1600MHz); 16GB disable eMMC 16GB v4.51
HP Omen; i7-4710QH; 8 GB memory; 256 GB San Disk SSD; Win 8.1
HP Photosmart 7520 AIO
++++++++++++++++++
**Click the Thumbs Up+ to say 'Thanks' and the 'Accept as Solution' if I have solved your problem.**
Intelligence is God given; Wisdom is the sum of our mistakes!
I am not an HP employee. -
HT5569 previous owner isn't with how can start iphon5 and forget previous owner Apple ID ?
previous owner isn't with how can start iphon5 and haw can forget previous owner Apple ID and how can I use my Apple ID ?
If you know the previous owner contact them and have them follow the procedure given here:
http://support.apple.com/kb/PH2702?viewlocale=en_US -
Was updating my ipod touch and it was all going ok until the white apple with the bar came up and then itunes crashed out, it is still on with the white apple and i cant turn it off please help me this has been like this for 30 minutes
Did you try to reset by holding the sleep and home button until the Apple logo comes back again?
If this does not work, try to connect again in recovery mode: http://support.apple.com/kb/HT1808 -
How come when I try to restore my iPhone 4 GSM (factory unlocked) with itunes, it starts ok, then at 60% blocks like for about 5 min, then continues till 100% and itunes give error msg (-1) ??? what can be the problem.
thank you in advance.Error 1 or -1
This may indicate a hardware issue with your device. Follow Troubleshooting security software issues, and restore your device on a different known-good computer. If the errors persist on another computer, the device may need service.
http://support.apple.com/kb/TS3694 -
Is CS4 compatible with Dell Computers and GeForce Go 7400 video cards?
I have been told by this forum I needed to uninstall and re-install CS4 because Encore and the Media Encoder do not work even after the fixes and updates. I have two Dell computers with Nvidia video cards. Someone told me CS4 and Encore will not work with the GeForce Go 7400 and will not install correctly. Is this true? Is there a site I can go to to see what cards are compatible?
Hi Meemin2,
Please stay with your other post so that all of the community can review the consolidated suggestions in one thread.
HP DV9700, t9300, Nvidia 8600, 4GB, Crucial C300 128GB SSD
HP Photosmart Premium C309G, HP Photosmart 6520
HP Touchpad, HP Chromebook 11
Custom i7-4770k,Z-87, 8GB, Vertex 3 SSD, Samsung EVO SSD, Corsair HX650,GTX 760
Custom i7-4790k,Z-97, 16GB, Vertex 3 SSD, Plextor M.2 SSD, Samsung EVO SSD, Corsair HX650, GTX 660TI
Windows 7/8 UEFI/Legacy mode, MBR/GPT -
It only happens on the screen I'm using the external video card. I'm assuming its a bug.
I think this is related to other posts, the solution at the moment seems to be to disable hard acceleration.
see here: [http://support.mozilla.com/en-US/kb/troubleshooting%20extensions%20and%20themes#w_the-problem-does-not-occur-in-safe-mode]
Similar problems
[http://support.mozilla.com/en-US/questions/786524]
[http://support.mozilla.com/en-US/questions/794823] -
Mouse Lag and poor performance. Video Card or Power?
Not specifically a FCP question but related. I recently purchased a new rig. Here are the specs.
2 X 2.93Ghz 6 Core/16GB RAM/ ATI Radeon 5870 video card.
I am having very odd mouse lag problems that are quite annoying. I am also having issues with playing sequences in unlimited RT. A guy in our office can play back better with an quad core. In regards to the mouse problem I have tried several different mouse and keyboard issues including a Wacom tablet and I get the same poor results.
Some people say it could be my video card and some say it could be a dirty power issue. I took the rig back to the store and the tech geek in the back said it worked fine for him but when I showed up with the keyboard and mouse to test it he had boxed up the computer and gone home.
Here is a clip of the screen and the weird jumpy jittery problem I am having.
http://pdvpro.com/stupid_mac/
You can see the mouse and the window I am dragging freeze for a second even though I am mousing smoothly and continuously. The mouse and keyboard and Wacom tablet work perfectly on my old Dual Core.
Any ideas?According to your video, it's happening in Finder, not just FCP,
so it must be something systemwide.
Is there something running in the background, like Spotlight indexing?
System Preferences > Spotlight > Privacy add your disks to be excluded.
Anything else running in the background?
Anything weird connected to your USB?
Also turn off your Airport or any network connection and repeat the test. -
SpeedGrade CC and non-supported GPU (video cards)
My GeForce GT630 video card is not officially approved by Adobe. Premier Pro allows me to use it with a warning (and it works great). But with SpeedGrade CC apparently there is not way to use this GPU. The popular "hack" of changing the cuda_supported_cards.txt file does not work anymore -- it is locked. How can I get SpeedGrade CC to function with my GPU?
Thanks for the encouragement. I found a way around the "saving" problem. I now have GeForce GT 630 at the top of the list in the TXT file. But in SpeedGrade CC Display Preferences it still claims, "No compatible devices have been found" even after a Refresh. Can you think of anything more I can try?
P.S. I just used to this "hack" on Prelude CC and saw the immediate performance increase I expected. So it works for prelude -- why not SpeedGrade CC? -
Msi 890fxa-g65 and two radeon 6950 video cards
Hi,
So far I have the one radeon 6950 with the MSI msi 890fxa-g65 motherboard. I was thinking of getting another 6950 down the road and was wondering if anyone was able to fit two 6950 video cards on a msi 890fxa-g65 motherboard.
It seems a bit tight. Also I currently have an Ultra brand 750W PSU. Is that enough?
Thanks.
MikeQuote from: zerohedge101 on 27-March-11, 22:58:58
Thank for the response. The main impedance is on the motherboard connections for the front panel of the computer case. These pins are located at the bottom of the motherboard where the 6950 video card goes. The pin connections and the wire stick out quite a bit and the video card might crush them a little.
Is there some sort of adapter for those pin connections to make them go on a 90 degree instead of straight out. This is the only impedance to get that video card in really. The case is big enough even though its only a mid -tower.
Thanks for any help.
Yes, those are you HDD, power and stand-by switch connectors I believe. Yes, I have seen 90* adapters but I don't remember where. It might come with the case attachments or a Mobo I put together about a year ago. In any case, take your existing card and "gentaly" place it into that bottom slot without the pins inserted (mark or draw a little graph as to where those pins go). See if you still have a little bit of room for your connectors. Also, what kind of connectors are we talking here? USB external pins are here to. If you can live with just the MoBo USB ports, then forget the external USB connection then. That way, simply put that card in and GO! Try it out. -
Show and Share Connection to video server failed
I have an SNS server running version 5.2.3. Everything time I try to play a video I get an error stating Connection to video server failed. I am storing videos locally on the SNS server. I can't figure out why I am getting the error.
Thanks,
JimHello Tom
1- Yes this is could be from license issue.Can you check the license for your Cisco SNS?.
2- Can you also restart services of Cisco show and share "streaming server" from Cisco DMM as attached.
3-Can you check the pairing is ok.
4-Did you have MXE integration , after uploading the video , what is the status of job "completed or failes".
Note:I got same problem before when i changed my FQDN from name to other but i fixed .
Thanks
please rate all useful infromation -
MobileMe Syn and Disk Utility Causes Video Card Pauses
Not sure what causes this, but every time MobileMe Sync or DiskUtility is doing something, my system basically becomes unusable. The video card drops to around 15fps and stutters - it's to the point I never let MobileMe sync because it always "chooses" to do it's thing during the most heavily used time - not being able to specify a sync time is rediculous.
Any ideas of why my system is getting hit so hard? Thanks.MobileMe Sync
http://discussions.apple.com/category.jspa?categoryID=228
SynchServices has been... interesting, glad I don't use it.
High cpu usage? you might want to do what one person recommended: just sign out and then sign back in. Not sure why. Others thought it would be necessary to delete .plist file.
Might want to also see MacIntouch and MacFixit for their reader reports and troubleshooting tips. er, not much hope or help there...
http://www.macintouch.com/readerreports/mobileme/
http://support.apple.com/kb/HT3493 -
Just bought a used mac pro and it has 4 video cards?
Hi all, I just bought a used mac pro and it has 4 Geforce 7300 GT video cards in it. Why would it have 4? Is it just to display on 8 monitors, or can OSX use the power of each card? Is there anything I can do to take advantage of these extra cards? sell them?!
No, OS X cannot combine the four cards. All they are good for is to connect 8 monitors. If you don't plan to do that then you're better off removing three of them (only the upper three.) This will save energy - roughly 50-75 watts per card - and the computer will be cooler.
-
Display issue with vertical windows start menu and dual screen
Hello everyone
I never reported it and I didn't find any information on google or mozilla support about this so here it is :
I am on windows 7 and I set up my windows start menu vertically. I also have 2 screens. These both points are important. If I put the start menu horizontally I do not have the issue anymore, and If I turn off one screen to have the display only on one screen, I do not have the issue anymore, which is a rare setup I guess so it could explain why this bug has never been detected.
HERE IS THE ISSUE
I have display issues on website with a big width, even the default add-ons Manager firefox page doesn't display correctly. Here is a screen shot:
http://img15.hostingpics.net/pics/368172bugFirefoxDisplay.png
So as you can see the disable and remove button on the right are not displayed, and at the bottom there isn't any scroll bar to scroll ! So I have no way to display the information on the right of the page, and it happens on a lot of other website (gmail, etc)
It is not such a big issue because my start menu is on my left screen and I can move firefox on the right screen to have a correct display.
I still think this is worth reporting this bug. I hope it is clear, feel free to ask questions if you didn't understand.You can try to disable hardware acceleration in Firefox (you need to close and restart Firefox).
*Tools > Options > Advanced > General > Browsing: "Use hardware acceleration when available"
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes
*https://support.mozilla.org/kb/upgrade-graphics-drivers-use-hardware-acceleration -
There is a new app on my iPod Touch screen...
can someone tell me how to use it
(and how to get it off my screen)
Thanks,
HerbsNurseSee Here...
Assistive Touch
Maybe you are looking for
-
Cluster Shared Volume disappeared after taking the volume offline for Validation Tests.
Hi, After an unknown issue with one of our Hyper-V 4 Node cluster running on Server 2008 R2 SP1 with fibre channel NEC D3-10 SAN Storage all our cluster shared volumes were in redirecting mode and I was unable to get them back online. Only after rebo
-
Lost my photo library!!!!!
While I was doing some work on my powerbook, I inadvertantly created a new photo library which wiped out my original library. I see my albums still memory but I can not important them into the photo library anymore. At this point iPhoto does not allo
-
I seriously don't know what to do, the screen says: "Your iPhone could not be activated because the activation server cannot be reached. Try connecting your phone to iTunes to activate it or try in a couple of minutes if this problem persists, contac
-
Need help with html code for password logins
I'm building a site and need to have a login page where multiple users can have unique usernames and passwords and then all be redirected to the same page within the same website. Does anyone have any code advice or tips on how this can be done in i
-
Starting a java program from a button
Hi, How can i start another java application (which is saparated from the orginal application) by pressing a button in the main application? what should the action be? tia,