White screen with flashing file icon with question mark mean

What does this mean. We are getting a white screen with flashing file icon with question mark inside the file.

It almost certainly means it can't find a bootable volume (one with OS X on it).
Which means most likely you will have to find your original system installation DVD and install it. Then you should figure out what caused the problem.
Read this to diagnose it before resorting to reinstalling the OS:
http://support.apple.com/kb/TS1440
Excerpt:
Additional steps
If your Mac still starts to a flashing question mark, follow the steps below. If any step resolves the issue, you don't need to continue to the next one.
Select your Mac OS X startup disk with Startup Manager by restarting and holding the Option key. After your Mac starts up, restart again to verify that the flashing question mark does not appear.
If the issue persists, insert your Mac OS X installation disc. Be sure to either use the disc that came with your Mac, or, if you installed a later Mac OS X version from disc, use the newer disc.
MacBook Air note: On a MacBook Air, there are two options for starting up from Mac OS X media: Either connect a MacBook Air SuperDrive to the MacBook Air via the USB port and restart the computer, holding down the C key during startup, or use Remote Install Mac OS X to startup from a system software DVD that's located on a partner computer. Once started up from Mac OS X media, skip to step 3.
Restart the computer, then hold the C key during startup.
From the Utilities menu, choose Disk Utility. Don't click Continue.
Select your Mac OS X disk (named "Macintosh HD" by default) in the left side of the Disk Utility window.
Click the First Aid tab.
Click Repair Disk to verify and repair any issues with your Mac OS X startup disk.
After repairing the disk, try to start up normally.
Important: If Disk Utility finds issues it cannot repair, you may need to back up as much of your data as possible (or use Time Machine to back up to a different disk), then erase the disk and reinstall Mac OS X. You should back up important files and data before erasing a drive. Erasing deletes everything on the hard disk (including things on your desktop). Also, you can install Mac OS X onto an external disk, start from the external disk, and use Migration Assistant to transfer items from your usual internal Mac OS X startup disk to the external disk, then erase the internal disk and reinstall Mac OS X.
If the issue persists, and Disk Utility didn't find any irreparable issues, quit Disk Utility, quit the Installer, select your disk when prompted, and restart.
If the issue continues, reset PRAM. Note: After resetting PRAM, if the computer starts up normally, reselect the startup disk in the Startup Disk preferences.
If none of these steps resolve the issue, start up from the Mac OS X Installation disc and reinstall Mac OS X.

Similar Messages

Flashing file icon w/ question mark at start up

My MacBook had been working fine on Tiger since I bought it last august, and a few months ago I installed Leopard, which also worked great except for safari freezing up every once in a while. But today when I tried to start it up and the blue screen appeared, it stayed like that for about ten seconds, and then a flashing file icon with a question mark appeared. I have no idea what it means, I can't make it startup. I've turned it on and off a few times, hoping for the best, but nothing. This computer is not even a year old, any help?
Thanks in advance.

Welcome to the Apple boards:
Your first hint that something was wrong was when Safari started freezing.
You may have a bad HD or at least one that is going bad.
Boot into the Leopard DVD and in the menu select Utilities and disk utility and repair HD and permissions.
See if that helps.
You may need more powerful tools such as DiskWarrior to repair the drive if it's flaky.
If the computer is less than a year old, you may be able to get it fixed at a local Apple store.

Cannot get into mac. I get a white screen and flashing file folder with question mark inside. What can I do?

2012/13 MacBook Pro froze up, so I did a hard shut down. Now, when I try to start up, it makes 3 unusual beeps, then I get a white screen. After a couple minutes, a flashing file folder with a question mark appears and remains. What is wrong and what can I do to fix it.

Three beeps usually means a RAM or RAM slots problem. The Question Mark means there is no bootable system found.
A flashing question mark or globe appears when you start your Mac
Question (?) Mark, Blinking Folder, or Gray Screen at Startup
These are related but not identical issues. Their causes are outlined in Intel-based Mac- Startup sequence and error codes, symbols. Solutions may be found in:
A flashing question mark or globe appears when you start your Mac
Mac OS X- Gray screen appears during startup
In most cases the problems may be caused by one or more of these:
a. Problem with the computer's PRAM - See Resetting your Mac's PRAM and NVRAM.
b. Boot drive's directory has been corrupted - Repair with Disk Utility.
c. Critical system files are damaged or deleted - Reinstall OS X.
d. The disk drive is physically non-functional - Replace the hard drive.
Note that the information I have provided is what Apple recommends, If other users suggest different solutions than found here, then be sure what they recommend does not impact on your warranty, if any, or ability to get continuing Apple service.
Please don't start removing drives or changing cables unless you know what you are doing and have exhausted other non-invasive alternatives outlined here. If you perform any work yourself that is unapproved by Apple, then you will void any warranty you may have and lose all further Apple Support.
Repair the Hard Drive and Permissions
Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
The main difference if you are using Lion or Mountain Lion is that you must first boot from the Recovery HD. Simply boot from the Recovery HD to perform the above.
Reinstall Snow Leopard Without Erasing The drive
1. Repair the Hard Drive and Permissions
Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
2. Reinstall Snow Leopard
If the drive is OK then quit DU and return to the installer. Proceed with reinstalling OS X. Note that the Snow Leopard installer will not erase your drive or disturb your files. After installing a fresh copy of OS X the installer will move your Home folder, third-party applications, support items, and network preferences into the newly installed system.
Download and install Mac OS X 10.6.8 Update Combo v1.1.
Reinstalling Lion/Mountain Lion Without Erasing The Drive
Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the main menu. Repair the Hard Drive and Permissions as follows.
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu.
Reinstall Lion/Mountain Lion: Select Reinstall Lion/Mountain Lion and click on the Continue button.
Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.

All i get is a white screen and a file icon with a ? in it

I turn on my computer and my screen turns white and then a folder icon with a ? just starts blinking .... how do i fix it ...what happend?

I had that the other day. There's a kb article here: http://support.apple.com/kb/TS1440
In my case, I used the OS X install disc, loaded up Disc Utility to verify the disc and then went to Startup disc to make sure that the HD was selected. Rebooted and all was well.
Still don't know what caused it but those steps seemed to fix it. Hopefully it will fix yours too!

Got a white screen with flashing file icon

Why do I have a white screen with flashing file icon with question mark inside?

It means your iMac cannot located a valid system to boot.
Insert the CD that came with the iMac and allow it to boot. Once it gets the point where it's offering to install the OS, go to the top menu and choose diskutility. Perform a repair on the main drive "Macintosh HD".

Flashing File Icon with Question Mark Upon Start-Up

Today when I went to use my computer (which was already on) it went blank and then came up with a gray screen with a flashing file icon with a question mark in the middle of it. I have already troubleshot things with several forums online and nothing has worked. I have tried to restart in Safe mode, single user mode, verbose mode, and tried to get on using my option key which got me to an internet login screen finally. I tried to log in and eventually got to an apply.com/support screen with -1007f underneath. I am not 100% which operating system I am on. I know that it is Mac OS X and pretty recent. Please respond if you can help!

Reset the SMC and PRAM
Intel-based Macs: Resetting the System Management Controller (SMC)
About NVRAM and PRAM
To boot from DVD:
Press C during startup
Start up from a bootable CD, DVD, or USB thumb drive (such as OS X install media).

When I start MacBook Pro13 shows gray Screen and flashing file Image with question mark

When I start MacBook Pro13 shows gray Screen and flashing file Image with question mark , it's brand new I just receive it from Apple Store .

Startup Manager to select Startup disk.
http://support.apple.com/kb/HT1310
Repair Disk
Steps 2 through 8
http://support.apple.com/kb/PH5836

What does a white screen with a file folder and question mark indicate?

what does a white screen with a file folder and question mark indicate upon start up?

That the computer can't find a useable boot volume.
Boot from your grey installer DVD disc 1 (hold down the C key on startup or hold down Alt/option on start and choose the installer disc).
OK the language page (if present). From the installer screen, go to the menu bar and choose Disk Utility; depending on the OS version it may be in the Utilities menu or Tools menu.
In DU, select your internal drive in the sidebar (the top item with the makers name and serial no.). Run Repair Disk (not Disk permissions). If problems are reported as repaired, run it again until you get a message in green "the volume seems to be OK".
If it says it can't repair the disc, you may need heavier guns such as DiskWarrior or TechTool to attempt a rescue.
Hope you have backups; retrieving data from adead drive can be expensive and tricky.

Flashing File icon with '?' does NOT mean your HDD is shot!

A week ago my computer failed and started up showing the flashing file icon with the '?' at startup. I ran all the diagnostics that every forum told me to. I even reset the PRAM. So I went to the mac store and they told me it was probably the HDD but that it could be just the SATA cable but there was no way to tell unless I had another HDD. So I went out and bought a 500GB for $65 and installed it. Sure enough the problem was only my SATA cable. Apple sold it and installed it for only $32. They also installed OS X for free.

I'm currently having the same problem. Flashing ? folder..troubleshooting..etc. According to everything I've read, it seems like my HDD is shot. When I boot from my OSX disc, I can't detect the HDD to install, restore, or anything. Yet, I've taken the hard drive out and it spins normally when I boot or launch the OSX disc. Do you still think it could just be the SATA cable?

My MacBook Air, once pressed the power button, comes up with a file containing a question mark. I have tried re-starting it but this logo continues to appear and will not go. I cannot log onto my mac. Any suggestions as to what this is please?

My MacBook Air, once pressed the power button, comes up with a file containing a question mark. I have tried re-starting it but this logo continues to appear and will not go. I cannot log onto my mac. Any suggestions as to what this is please?

You need to reinstall OS X:
Reinstalling Lion/Mountain Lion Without Erasing the Drive
Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the main menu. Repair the Hard Drive and Permissions as follows.
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu.
Reinstall Lion/Mountain Lion: Select Reinstall Lion/Mountain Lion and click on the Continue button.
Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.

27 inch Imac Intel won't boot up. Screen ligthts up, then shows a flashing file folder w question mark. What can I do to find the problem?

27 inch iMac Intel won't boot up. Screen lights up, then shows a flashing file folder w question mark. What can I do to find the problem?

Please readd Apple's trouble shooting steps in Flashing question mark appears when you start your Mac

White screen, showing a flashing file icon with question mark??

Having issues with the above, please help

Flashing ? mark means it can't find the Disk it thinks it's supposed to boot from, or the Disk is muxed badly.
If 10.7.0 or later...
Bootup holding CMD+r, or the Option/alt key to boot from the Restore partitirion & use Disk Utility from there.

White screen with file icon and Question mark after a kernel panic???

I'm using my girlfriends 20" iMac and her computer keeps having kernel panics. And then at times when we restart the computer, we get a white screen with a file icon and a question mark inside. Any ideas on what to do???? Her graduation project is on that computer and she is stressed like you wouldn't believe. Safe to say, I'm taking the brunt of it. Please help!!!

It sounds like you might be having a hard drive problem. The folder icon with question mark means the computer can't find a startup drive/system folder. I suggest that you back up all important data, especially her project. Before bringing it in for service, run the Apple Hardware Test - put in your original system restore DVD and restart the computer, holdng down the "D" key. Run the extended diagnositics (it will take over an hour (depending on how much RAM you have) and will tell you if there is anything wrong with your hardware. If it dinds a problem then you can take it to the nearest Apple authorized service provider to check it out.

White screen with flashing folder containing a question mark

I attempted to boot my MacBook and it is now only showing a white screen with a folder containing a question mark. I have only had the MacBook for less than 3 months. Help!!!!

There are four general causes of this issue:
1. The computer's PRAM no longer contains a valid startup disk setting when there aren't any problems with the disk itself. This can be checked for by pressing the Option key and seeing if the drive appears.
2. The internal drive's directory structure has become damaged. This requires usage of an alternate bootable system to perform the repair.
3. Critical system files have been deleted. This requires usage of an alternate bootable system to reinstall them.
4. The internal drive has died or become unplugged. This is the most likely case if the computer took a sharp impact or there are unusual sounds coming from its location.
(102241)

My apple computer has a white screen with a file and a question mark

I have a white screen with a ? in a file. I have tried holding the option,command, P R buttons while turning it on. No help Does anyone have anymore ideas?

The flashing question mark says, " I cannot find the Startup Disk you said to use."
Hold down the Option key while starting up. This should cause your Mac to draw an Icon for each bootable device.
If none are drawn, you Startup Disk has been damaged.
If Recovery_HD is shown, choose that, launch Disk Utility, select your Macintosh_HD, and ( Repair Disk ).

White screen with flashing file icon with question mark mean

Similar Messages

Maybe you are looking for