White screen with Nokia name does not go away in t...

my Nokia 5530 will not go on to its home screen, instead it stays on a white screen displaying the name 'Nokia' until it runs out of battery. If this question is not answered, I will probably no buy another touch screen Nokia again because there are too many problems.

Take out your memorycard first and boot up. If the phone boots normally, then you have to format your card - or if it keeps ****** up, you will need a new one.
If this does not help, do a hard reset. - Note that this will delete everything on your phonememory as contacts, sms's etc, but may be the only way to fix it. Press and hold call-end - camera button while powering on. Keep holding them until you get to choose language/regin, or get to type your pincode.

Similar Messages

HELP-- N97 stuck at white screen with nokia logo

Kindly help anyone. I installed lifetime free ovi maps on to N97 via computer and it worked initially. Then all of a sudden everything went black and phone restarted itself and since then it is stuck on the white screen with nokia logo.I have taken out battery umpteen times and everytime it is stuck. Won't go beyond this point. kindly help

@tcwlam-if yougo to the website, you can download the app as a .sisx file, and you can just load the file onto your phone and install it there.
@silvervectra- I'm guessing you downloaded it and just installed despite the compatibility warning? The problem why this is still not available to the n97 is likely due to software incompatibility, which is why it will be delayed to come with the new firmware. If so you just bricked your phone due to you not wanting to wait, congratulations (insert really sarcastic tone)! Anyway, just do the hard reset. Hopefully it would fix it and uninstall the ovi maps. Otherwise you would likely have to have the guys at the Nokia Care Center reflash your phone and roll back ovi maps.
Message Edited by chanchan05 on 23-Jan-2010 11:14 AM
If you find my post helpful please click the green star on the left under the avatar. Thanks.

]The server name server_migration_2 specified with -Dweblogic.Name does not

Hi!
I followed the following steps to configure a clustered environment with two machines:
- installation of Oracle WebLogic Server 11g (10.3.3) in machine A and B
- creation of a domain using configuration wizard (in machine A)
- distributed domain using pack (machine A) and unpack (machine B)
- startup of node manager in both machines (both reachable)
- creation of a Managed Server 1 in machine A
- creation of a Managed Server 2 in machine B
- startup of the Managed Server 1 in machine A (it works fine)
- startup of the Managed Server 2 in machine B , it fails with the following error:
<Nov 30, 2010 12:39:28 PM WET> <Critical> <WebLogicServer> <BEA-000362> <Server failed. Reason:
There are 1 nested errors:
weblogic.management.ManagementException: [Management:141223]The server name server_migration_2 specified with -Dweblogic.Name does not exist. The configuration includes the following servers {AdminServer}.
at weblogic.management.provider.internal.RuntimeAccessImpl.<init>(RuntimeAccessImpl.java:149)
at weblogic.management.provider.internal.RuntimeAccessService.start(RuntimeAccessService.java:41)
at weblogic.t3.srvr.ServerServicesManager.startService(ServerServicesManager.java:461)
at weblogic.t3.srvr.ServerServicesManager.startInStandbyState(ServerServicesManager.java:166)
at weblogic.t3.srvr.T3Srvr.initializeStandby(T3Srvr.java:803)
at weblogic.t3.srvr.T3Srvr.startup(T3Srvr.java:493)
at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:446)
at weblogic.Server.main(Server.java:67)
>
<Nov 30, 2010 12:39:28 PM WET> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to FAILED>
The config.xml file located at ../user_projects/domains/mydomain/config/ in Machine 1 has the full environment setup, however the same file on machine 2 only has admin server configuration.
Why it happens? These two files must be synchronized? The config.xml in the Machine 2 is used by who? Admin server uses this file?
Thanks a lot
A.

If your newly created managed server is on a 3rd machine you will still need to 'pack/unpack', to transport the configuration files to the new machine.
If your 3rd managed server share domain_home with an already existing managed server you wont need to do this. In this case when a new managed server is created in the admin console, the admin server will propogate the change to the existing managed server which will update its configuration files in its local domain_home. The new server when starting will pick up this updated details from the shared location and will be able to start.
You were doing the pack after creating admin server alone. So the config files transported to remote machine has only details of Admin Server and using that you were trying to start the managed server, where i it clearly failed saying that it can't find that managed server name in its configuration.
If you have adavance knowledge of how many managed servers you need to create , at the time of domain creation, the right way is to configure all the man servers in the domain configuration wizard and then use pack/unpack to distribute the configuration files to each of the remote machine where the managed servers run.
Hope it makes sense.

Restarted my MacBook Air, just have a white screen with apple . Will not start up

Restarted my MacBook Air, just have a white screen with apple . Will not start

What version MacBook Air do you have? Usually identified by the year you bought it, i.e. mid-year 2012, 2011, etc. Also, what OSX are you running? (please provide OSX ver number, i.e. 10.8.2 for latest Mountain Lion, etc.)
Not sure I can help you directly but for others to lend a hand, they'll need to know this information to make a sound suggestion. I see you're new to posting here so this will help you in the future.
Good luck.

White screen with apple logo - WILL NOT BOOT UP!

HELP!! My macbook is about 3 years old. I've already had the hard drive die on me once and I lost everything. This time is a little different.
I have been getting the colour wheel of death for quite some time now but my computer has continued to work, just slow and constantly shutting down programs. I thought I should restart so I did a force restart and when my computer came back on all it had was a white screen with the grey apple logo. That's it! It does nothing!!! It will not load past this screen. If I leave it on it will continually shut down and turn on to this page over and over every few min. I hear the fans and it sounds like something might be going on but still nothing! *All I see is a white screen with a grey apple logo. PLEASE HELP!* I don't want to lose all my personal items again
I'm not 100% sure of my operating system and I'm not to good with tech stuff so please make it so I can follow the instructions.
THANK YOU!

Hi cmiano and welcome to Apple Discussions!
Even more important than the steps listed by Dave is *make all efforts to back up your data NOW!* As your first hard drive failure might have indicated to you, drives are mechanical devices and are thus subject to failure. Computer people will tell you there are two types of hard drives: those that have failed and those that are going to fail. The only question is when. Keep a backup of your data current at all times. Important data should be backed up at least twice.
Having said that, in order to do it now you are going to need to do some work. I would remove the hard drive from your MacBook and put it in an enclosure. Connect this enclosure to another Mac and copy over all your important data.
After you have done this, put the hard drive back in your MacBook and do the steps that Dave suggested.
Best of luck.

N8 Stopped in The White screen with Nokia Logo!?

Hello Guys, yesterday i had tried to change fonts on my N8 by adding the font to Fonts folder , it worked with me when im trying the english Fonts but after this > Arabic language disappeard from phone , so i back to original font and every thing back again fine , but i tried to add Arabic font , then restarted my phone to apply the font , but Phone stoppped in the White login screen with Nokia Logo , i tried the 3 fingers hardrest but still same , what i do pls?

romyiooo wrote:
I tried the 3 fingers hardrest but still same , what i do please?
@romyiooo
Please don't take this the wrong way but did you release the power button the moment vibration felt whilst keeping the remaining three keys depressed? It took me a couple of goes the first time that I carried out this procedure to get it right.
Happy to have helped forum with a Support Ratio = 42.5

N580 white screen, external display also does not work

I have an N580 that I purchased about 9 months ago. Last night, the screen went completely white, and upon reboot, the screen instantly comes up white.
After trying many of the troubleshooting steps seen throughout the interwebs for this, I tried plugging the VGA into a known good external monitor, but the LCD remains white, and Function F7 does not switch the display over to the external monitor.
I am thinking that this must be the graphics chip, as the backlighting still seems to work, and the display won't transfer to external monitor.
Any other suggestions?
Also, what are my options seeing that this is within the 1 year warranty?

Dear oviyach,
Welcome to Lenovo Community,
There are some simple Troubleshooting steps that you can try.
1)     Completely shut down the machine.
2)     Remove the Battery.
3)     Remove the Charger / AC Adaptor.
4)     Press and Hold on the Power Button for 20 continues Seconds.
5)     Connect the Charger / AC Adaptor.
6)     Press and Hold on the Power Button for 10 continues Seconds.
7)     Press The Power Button once and check please if you still have the White Screen issue.
This procedure is used to discharge any extra charge in the mother board. Please try this solution and if the problem still exists, just tell me know.
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

HT1414 iPod Touch has a blank white screen and the computer does not recognise it. I have tried pressing the Home button and Up Volume button and Off button to no avail. Thank you

I tried to download an upgrade that was recommended by APPLE, the upgrade stopped halfway through and the iPod Touch was turned off, now the iPod Touch has a BLANK WHITE SCREEN and is UNRESPONSIVE to the COMPUTER
I wonder if anyone can help
Thank you
Brizey

Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iPod fully off, let the battery fully drain. After charging for an least an hour try the above again.
- If still not successful that indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar

Nokia N8 with Nokia Belle does not recognize heads...

My headset (WH-701) is no longer recognized by my nokia N8 after I had updated to nokia belle. I first have to put my headset into the 3,5 mm AV connector before being recognized, and even then the headset may stop working after a few minutes. Once the headphone is working I still cannot make use of the (music)buttons on the headset (louder, softer, next, previous, etc.) Please can someone help with this problem? There must be a solution for this? I am using the headphones every day.
I know that already started on several topics, but Nokia has still not responded to this problem!
Thanks in advance for your help

hi there mate,
if you are having problems with your phone, you can try checking via the phone itself or via Nokia Suite, if there are any firmware updates available, and to please update to the latest version offered. If there are no updates, try re-installing your current firmware, and if that doesn't work, then Restoring to factory settings. Failing that, perform a three-finger hard reset and if that doesn't work either, then you will need to take your phone to your local Nokia Care point for them to inspect.
to locate local Nokia care: http://nokia.com/support
Remember to backup all personal data first

My ipod is black screen with logo and does not react

I connect the iPod to the PC and the logo appeared to me and not turn on or off,

Try here:
iOS: Not responding or does not turn on
If it remains with the logo, let the battery fully drain. After charging for an hour try again.

HT1533 on starting the IMAC (2010),there is a white screen with apple logo which doest go away or proceed to next screen. What could be wrong?

I had booted the system many times., tried option command P R buttons at the same time. No luck. If the Imac is connected to internet by ethernet port, sometimes the screen is just black and blank to which i had to remove internet port after which if i reboot , the login page appears and then goes to apple logo on white screen and is stuck there. Please help!!

Take each of these steps that you haven't already tried. Stop when the problem is resolved.
Step 1
The first step in dealing with a boot failure is to secure your data. If you want to preserve the contents of the startup drive, and you don't already have at least one current backup, you must try to back up now, before you do anything else. It may or may not be possible. If you don't care about the data that has changed since your last backup, you can skip this step.
There are several ways to back up a Mac that is unable to boot. You need an external hard drive to hold the backup data.
a. Boot into the Recovery partition, or from a local Time Machine backup volume (option key at startup.) When the OS X Utilities screen appears, launch Disk Utility and follow the instructions in this support article, under “Instructions for backing up to an external hard disk via Disk Utility.”
b. If you have access to a working Mac, and both it and the non-working Mac have FireWire or Thunderbolt ports, boot the non-working Mac in target disk mode. Use the working Mac to copy the data to another drive. This technique won't work with USB, Ethernet, Wi-Fi, or Bluetooth.
c. If the internal drive of the non-working Mac is user-replaceable, remove it and mount it in an external enclosure or drive dock. Use another Mac to copy the data.
Step 2
Press and hold the power button until the power shuts off. Disconnect all wired peripherals except those needed to boot, and remove all aftermarket expansion cards. Use a different keyboard and/or mouse, if those devices are wired. If you can boot now, one of the devices you disconnected, or a combination of them, is causing the problem. Finding out which one is a process of elimination.
If you've booted from an external storage device, make sure that your internal boot volume is selected in the Startup Disk pane of System Preferences.
Step 3
Boot in safe mode. Note: If FileVault is enabled on some models, or if a firmware password is set, or if the boot volume is a software RAID, you can’t do this. Post for further instructions.
Safe mode is much slower to boot and run than normal, and some things won’t work at all, including wireless networking on certain Macs.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
When you boot in safe mode, it's normal to see a dark gray progress bar on a light gray background. If the progress bar gets stuck for more than a few minutes, or if the system shuts down automatically while the progress bar is displayed, your boot volume is corrupt and the drive is probably malfunctioning. In that case, go to Step 5.
If you can boot and log in now, empty the Trash, and then open the Finder Info window on your boot volume ("Macintosh HD," unless you gave it a different name.) Check that you have at least 9 GB of available space, as shown in the window. If you don't, copy as many files as necessary to another volume (not another folder on the same volume) and delete the originals. Deletion isn't complete until you empty the Trash again. Do this until the available space is more than 9 GB. Then reboot as usual (i.e., not in safe mode.)
If the boot process hangs again, the problem is likely caused by a third-party system modification that you installed. Post for further instructions.
Step 4
Sometimes a boot failure can be resolved by resetting the NVRAM.
Step 5
Launch Disk Utility in Recovery mode (see Step 1.) Select your startup volume, then run Repair Disk. If any problems are found, repeat until clear. If Disk Utility reports that the volume can't be repaired, the drive has malfunctioned and should be replaced. You might choose to tolerate one such malfunction in the life of the drive. In that case, erase the volume and restore from a backup. If the same thing ever happens again, replace the drive immediately.
This is one of the rare situations in which you should also run Repair Permissions, ignoring the false warnings it may produce. Look for the line "Permissions repair complete" at the end of the output. Then reboot as usual.
Step 6
Reinstall the OS. If your Mac was upgraded from an older version of OS X, you’ll need the Apple ID and password you used to upgrade.
Step 7
Repeat Step 6, but this time erase the boot volume in Disk Utility before installing. The system should automatically reboot into the Setup Assistant. Follow the prompts to transfer your data from a Time Machine or other backup.
Step 8
This step applies only to older Macs (not current models) that have a logic-board ("PRAM") battery. Both desktop and portable Macs used to have such a battery. The logic-board battery is separate from the main battery of a portable. A dead logic-board battery can cause a gray screen at boot. Typically the boot failure will be preceded by loss of the startup disk and system clock settings. See the user manual for replacement instructions. You may have to take the machine to a service provider to have the battery replaced.
Step 9
If you get this far, you're probably dealing with a hardware fault. Make a "Genius" appointment at an Apple Store to have the machine tested. If you can't get to an Apple Store, go to another authorized service provider.

When I open a document in Adobe XI Pro Windows 8.1 I get a white screen and the document does not appear to open, Adobe is 'not responding'

I purchased a computer with Windows 8 and installed the 8.1 upgrade. I installed Adobe Acrobat XI Pro and have had error messages about specific fonts not being present but the document opens just fine. Other times (about half the time) the document will not open or opens as a blank screen, and eventually Adobe Not Responding appears, with the usual choices to close or look for a solution. If I look for a solution it tells me that no solution was found. I have not found any information online about this problem. I have used Adobe Pro in previous versions in a Windows 7 and Windows XP environment and not had any problems. Is there a simple solution to this? I have uninstalled and reinstalled Adobe, and still no luck.

Hi nausm,
Is this issue specific to the pdf files or do you face the issue with any pdf you try to open?
Which application was used to create these pdfs?
Have you updated Acrobat to v11.0.7 and checked?
Are you able to launch Acrobat standalone app without clicking on any pdfs?
You are getting error related to specific fonts because the document might have the fonts that are not available on your computer.
Regards,
Rave

Help, my Mac mini will not start up, only keeps thinking on first page( white screen with apple emblem)

Help, my Mac mini will not start properly. Only goes to the white screen with thinking. Will not go to the password section

Are you sure about your hard disk health, any clicking noice recently?
Go to boot menu (press option button or button left to your space bar while booting) > Select Recovery drive > Disk utility > Verify the volume on which OS X is installed.

Power Mac G5 on start up it repetedly has white screen with circling icon then just switches off

Power Mac G5... Pleas Help!!! i'm not sure if my hard drive is broken but on start up it repetedly has white screen with the circling (doing somthing) icon then just switches off. If i press alt when switching on i get a grey screen with 3 icons, 1st is like a refresh arrow button & last is a straight arrow button on pressing either of these mac just starts the white screen thing again, the middle icon is a picture of a hard drive with a blue cross in the corner & written under neath it says macintosh HD. Does this mean my hard drive has gone?

Been there, done that. Try a Safe Boot (holding down the shift key at boot) and see if it boots. If it boots, then you may be having problems with either the power supply or the video card. What video card is in the machine?
If it does a safe boot OK, then we can troubleshoot using a verbose boot. Verbose boot puts up a Unix Console screen and displays text output during the boot process. When I had these symptoms, verbose boot showed me that the power supply was clicking off right after the kext to drive the GeForce 6800 card loaded. I replaced the power supply and the problem went away.
To initiate a verbose boot, hold down the cmd-V combination until you see the console screen come up. Watch the output and pay attention, because you need to remember what is being said when the machine shuts down. You may need to repeat this two or three times.
As an aside, often times power supplies exhibit this behavior when they have become choked with dust. This is pretty universal after five or six years, requiring that the power supply be removed and the dust blown out with clean shop air.

I get a white screen with apple logo and progress bar on my imac mavericks

I get a white screen with apple logo and progress bar ,then computer shuts down
when I turn my imac back on same thing happens,every time same thing
pprogress bar only goes half way then computer shut down
is there a solution ?
if not is there a way to at least salvage some files and docs?
i Have the latest imac 27

Thanks I tried it but after I repaired my disk via disk utility at start up, it told me that
my disk can't be repaired and to try to back up my files so I can format it
but is there to back up my files?
also what I get is white screen with the progress bar not grey

White screen with Nokia name does not go away in t...

Similar Messages

Maybe you are looking for