White space issues between content and footer.

I am having white space/page length issue between the end of my content and the footer.
I have read the forums and tried changing the page length minium height to 800 and then I
unchecked the sticky footer in page properties on both the master page and the content page itself.
Here's a link to one of my pages. http://www.ueonline.com/rohs-info.html
This page has very little content and you can see the white space.
Any help is appreciated.

This may be a little dated for a reply, and I'm not 100% sure your issue is the same as mine, but I discovered that unchecking the sticky footer option in site properties solved the problem. I should note that the website I was building for a client was über simple, and while disabling that function solved the headache in my own project, it may incur unwanted results in others, depending on the complexity.
DTA

Similar Messages

Keeping a Consitent Gap between Content and Footer.

Hi !
I spent a couple of days trying to solve how to regulate the space between body and footer on a MUSE-project. I think it‘s worth dropping a few line for humankind.
We’re on a master-page. Let’s say our standard page has the following properties:
The Footer-marker is set to y: 500 px
The Bottom_of_Page-marker is set to y: 650 px
The Bottom_of_Browser-marker is set to y: 680 px
These settings mean, you have 150 px height-space for the Footer, starting from y: 500 px.
If you require more space for the Footer, it’s the Bottom_of_Page-marker you’ll have to drag down ( not the Footer-marker ! ).
If you’d like to add a gap, so your Footer is not directly sticking to the Content of the page anymore, but you’d rather like to preserve some space between both, you’ll have to drag down only your Footer-elements a little bit, e. g. down to y: 520 px. So, in a way, the 20 px gap created is part of the Footer. No changes must occur to the Footer-marker, at least for this reason. You’ll only eventually drag the Bottom_of_Page-marker down, in case Gap-height + Footer-height require more space than already available (depending on your figures).
Cheers
G

Sanjit, I didn't make any changes to the master at all. It was fine online, then I opened it to make a small type change and it was like this, and I can't get it back to where it was.
I tried adjusting the footer, but the slideshow is not on the home master page, just the bottom brown part and the type in it.
I don't know what could have caused it to change from before to now? I haven't touched the file in months.

How do I clear the blank space between content and footer?

In the process of revising a Muse website, I deleted some content from one of the pages and revised the content that remained on the page. Now I have a blank area between the bottom of the revised content and the top of the footer, and I can't seem to get rid of the blank space. It doesn't appear that there are any text blocks or other images in that area, so I can't find any objects to delete. Help?
The website is currently published in a draft mode for client review. You can examine it at: http://page7creative.com/clients/coremove_jun2012draft/retreats.html. The page in question is the Retreats page. Restarting Muse made no difference. I work on the Mac platform.
Before I sent this post, I decided to try creating a new page, then copy/paste the content onto the new page, and save the Muse site under a different name. Lo and behold, the page (and the site) works like it should...without any extra space above the footer on that page. It would appear that something went astray when I deleted content on that page. I can use the new page to get the site working properly, but decided to go ahead and send this post so that you can look at the page code and perhaps see what is wrong that is causing the blank space...in case I ever run into this again.
Thank you.
pyxis83

Thanks for sending your file.
There is a graphic at the bottom of the content area of the Retreats page that's been cropped to a size of zero width and 2 pixels in width.
Unfortunately, there's a bug with pointer tool drag selection (aka marque selection) that prevents it from selecting an item that has zero width or zero height. Therefore the easiest way to select this item to delete it is to select any other item on the page, then hit the tab key repeatedly to cycle through every item on the page. When you get to this item you should see a little pile of selection handles at the left edge of the third column and right at the bottom of the content area. The width and height will display as zero and 2. Delete this item and the page will resize to fit the remaining content.

Published site has huge gap between content and footer

So i have just published my site and when i look at it after being published i have a good 2 inch gap between the bottom of the content and the footer.
I have read up on a number of bits and pieces and they say you mauy have a hidden container on the pages, which i totally accepted so i searched and nothing. I then thought it might be a issue with the master page i was using, so checked that. Couldnt see it.
However when i looked through my site and saw the master pages i used i had a mix and some worked and some didnt. Im lost!!!
I launch on Sat and its a bit of a pain. Has anyone had this issue? The preivew looks fine, so im not sure where this gap is coming from.
Thanks in advance!

When Sticky Footer is checked, the footer will stick to the bottom of the browser window unless the page is taller than the browser window.
Glad that I could be of help.
Regards,
Sachin

Footer Issue -- Gap between content and footer

Hi, I maintain this site for a client and it used to work.
I went on there today to make some small event type changes, and now the page content won't align with the footer on some pages, leaving a big white gap. I've messed around in there but can't seem to make it work.
Help please? Screenshots attached.

Sanjit, I didn't make any changes to the master at all. It was fine online, then I opened it to make a small type change and it was like this, and I can't get it back to where it was.
I tried adjusting the footer, but the slideshow is not on the home master page, just the bottom brown part and the type in it.
I don't know what could have caused it to change from before to now? I haven't touched the file in months.

Removing gaps between content and footer/ content and header

I've been looking all around the internet for some solution, and it's probably a simple one.
But it's making me want to throw a brick through a window.
How the hell do I make that gap (pointed to in red) disappear so that my footer image is seamless with my content background?

Remove the bottom margin from your paragraph?
p { margin:0; padding:0;}
Or change the spacing to before so you still get gaps between paragraphs
p {margin-top:10px; padding:0;}

How do I remove the white space from the bottom and side of my document?

How do I remove the white space from the bottom and side of my document? (I'm not talking about printing, just viewing it on the screen.) There are about 6 inches of white space at the bottom and at the right hand side. I don't like this. On a blank new spreadsheet it's triple that amount of white space.

The infinite canvas convention doesn't make a lot of sense for Numbers. When I'm viewing a spreadsheet and mistakenly scroll into white, empty space I think, "this is ridiculous - all of my content is fits on one screen. there's nothing over there."
A (relatively) infinite canvas is logical for Microsft Excel because it's one big table. There are 256(?) columns by default and hundreds of rows on a sheet - there are cells outside what a user is looking at to see. However, when viewing a Numbers spreadsheet with a single 10 column 10 row table that fits on the screen, there's nothing else on it to scroll to.
Numbers should distinguish between viewing a spreadsheet and editing one. When I'm just viewing, when there's no content outside the window it shouldn't scroll there. This window behavior is beyond annoying for Numbers on my iPad and iPhone.
(Adding user-defined canvas size setting to my view mode / edit mode thinking would probably be the most complete solution to this now that I think about it.)
Until now the way scrolling worked in Numbers has defied logic. Actually it still does lol. That said, thank you Yellowbox for providing a clear explanation. Much appreciated.

How to remove white spaces from XML content using Coldfusion?

Hi,
Can anybody help me in removing white spaces in between the tags from the below XML content using coldfusion?
XML content:
<?xml version="1.0" encoding="UTF-8"?> <chart showdates="true" today="08/12/2009"> <phases> <phase color="CCFFCC" name="Funded"/> <phase color="CDCD67" name="Concept"/> <phase color="99CCFF" name="Feasibility"/> <phase color="0099FF" name="Development"/> <phase color="0099FF" name="Development"/> <phase color="CC99FF" name="Close-out"/> <phase color="909090" name="Sustaining"/> </phases><program name=""> <project enddate=" 30/03/2007 " id="43250" startdate=" 28/02/2006 "> <version enddate=" 30/03/2007 " number=" 1" startdate=" 28/02/2006 "> <phase color="CCFFCC" currentdate="23/03/2006" name="Project Start" plandate="28/02/2006" type="phase"/> <phase color="99CCFF" currentdate="04/04/2006" name="Feasibility Closure" plandate="31/05/2006" type="phase"/> <phase color="0099FF" currentdate="29/03/2007" name="Commercialization" plandate="30/12/2006" type="phase"/> <phase color="CC99FF" currentdate="30/03/2007" name="Project Closed" plandate="30/03/2007" type="phase"/> <phase color="909090" currentdate="" name="Obsolescence" plandate="" type="phase"/> </version> </project> </program> </chart>
Output I am expecting is like below,
<?xml version="1.0" encoding="UTF-8"?><chart showdates="true" today="08/12/2009"><phases><phase color="CCFFCC" name="Funded"/><phase color="CDCD67" name="Concept"/><phase color="99CCFF" name="Feasibility"/><phase color="0099FF" name="Development"/><phase color="0099FF" name="Development"/><phase color="CC99FF" name="Close-out"/><phase color="909090" name="Sustaining"/></phases><program name=""><project enddate=" 30/03/2007 " id="43250" startdate=" 28/02/2006 "><version enddate=" 30/03/2007 " number=" 1" startdate=" 28/02/2006 "><phase color="CCFFCC" currentdate="23/03/2006" name="Project Start" plandate="28/02/2006" type="phase"/><phase color="99CCFF" currentdate="04/04/2006" name="Feasibility Closure" plandate="31/05/2006" type="phase"/><phase color="0099FF" currentdate="29/03/2007" name="Commercialization" plandate="30/12/2006" type="phase"/><phase color="CC99FF" currentdate="30/03/2007" name="Project Closed" plandate="30/03/2007" type="phase"/><phase color="909090" currentdate="" name="Obsolescence" plandate="" type="phase"/></version> </project></program></chart>
Thanks in advance,
Regards,
Manoz.

Daverms,
Thanks for the quick turn around..
I have applied the solution what you suggested above (<cfprocessingdrirective suppresswhitespaces="yes"), still whitespaces are existing in my output.
The output what I am getting is,
(blue color part is my output & red color indicates whitespaces)
<?xml version="1.0" encoding="UTF-8"?>
<chart showdates="true" today="09/12/2009">
<phases>
<phase color="CCFFCC" name="Funded"/>
<phase color="CDCD67" name="Concept"/>
<phase color="99CCFF" name="Feasibility"/>
<phase color="0099FF" name="Development"/>
<phase color="0099FF" name="Development"/>
<phase color="CC99FF" name="Close-out"/>
<phase color="909090" name="Sustaining"/>
</phases>
<program name="">
<project enddate=" 01/01/2010 " id="12059" startdate=" 20/06/2003 ">
<version enddate=" 01/01/2010 " number=" 1" startdate=" 20/06/2003 ">
        <phase color="CCFFCC" currentdate="20/06/2003" name="Project Start" plandate="20/06/2003" type="phase"/>
        <phase color="CDCD67" currentdate="" name="Concept Closure" plandate="" type="phase"/>
        <phase color="99CCFF" currentdate="20/06/2003" name="Feasibility Closure" plandate="20/06/2003" type="phase"/>
        <phase color="F0FF00" currentdate="" name="Alpha Test" plandate="" type="milestone"/>
        <phase color="F0FF00" currentdate="26/07/2004" name="Beta Test" plandate="31/05/2004" type="milestone"/>
        <phase color="0099FF" currentdate="29/06/2005" name="Commercialization" plandate="08/12/2004" type="phase"/>
        <phase color="CC99FF" currentdate="24/02/2006" name="Project Closed" plandate="01/01/2010" type="phase"/>
        </version>
<subproject enddate=" 16/10/2008 " id="11809" name="espWatcher Pricing Toolkit" startdate=" 01/08/2003 ">
<version enddate=" 16/10/2008 " number=" 1" startdate=" 01/08/2003 ">
        <phase color="CCFFCC" currentdate="01/08/2003" name="Project Start" plandate="01/08/2003" type="phase"/>
        <phase color="99CCFF" currentdate="" name="Feasibility Closure" plandate="" type="phase"/>
        <phase color="0099FF" currentdate="15/06/2005" name="Commercialization" plandate="08/12/2004" type="phase"/>
        <phase color="CC99FF" currentdate="16/10/2008" name="Project Closed" plandate="16/10/2008" type="phase"/>
        </version>
</subproject>
<subproject enddate=" 31/12/2070 " id="35704" name="espWatcher version 2 (2005)" startdate=" 01/01/2005 ">
<version enddate=" 31/12/2070 " number=" 1" startdate=" 01/01/2005 ">
        <phase color="CCFFCC" currentdate="01/01/2005" name="Project Start" plandate="01/01/2005" type="phase"/>
        <phase color="99CCFF" currentdate="01/07/2005" name="Feasibility Closure" plandate="01/07/2005" type="phase"/>
        <phase color="0099FF" currentdate="31/03/2006" name="Commercialization" plandate="31/03/2006" type="phase"/>
        <phase color="CC99FF" currentdate="31/12/2070" name="Project Closed" plandate="31/12/2070" type="phase"/>
        </version>
</subproject>
</project>
</program>
</chart>
However this solution removes most of the whitespaces, I want exact output as flash file is expecting so..
Where ever I am calling the CF functions, there I am getting the whitespaces. like below cases.
startdate="#getProjectStartDate(sProjectIdList)#" -> output I am getting for this statement is -> " 12/09/2009 "
Please assist me...
Regards,
Manoz.

Why can't I use WebCT chat with my computer? I get the 'spiral of death' every time I try to type in my chat. I have a feeling it has to do with compatibility issues between Java and Tiger.

Why can't I use WebCT chat with my computer? I get the 'spiral of death' every time I try to type in my chat. I have a feeling it has to do with compatibility issues between Java and Tiger.

Hi Elizabeth,
Do your Mac meet any of these requirements?
http://www.wvnet.edu/services/webct/requirements.html
From this it appears to be PC only!???
http://sourceforge.net/projects/awebctcclient/files/Pancake%20%28it%20own%20proj ect%20now%29/Pancake%20Console%20V1.0.0/PancakeConsole-1.0.0-src.zip/download
Can you provide any more info on which bersion or file you have?
Can you tell us why you need this for your use?

Compatibility issues between R12 and report builder 2.5

Hi,
I just want to know if there are issues between R12 and (Forms 4.5 and Reports 2.5)? I have been using 6i since I started in the oracle so I'm a little new to this.
Thanks
peopsquik

As my understanding there is no issue for Forms 4.5 and Reports 2.5 with R12.
You can develop report with Report 6i can be deployed with R12.You cannot use Forms 4.5, Reports 2.5 or Developer (Forms/Reports) 6i with Oracle EBs R12 as it is not certified. The only supported version is Developer 10g
Using the OracleAS 10.1.2 Forms and Reports Builders with Oracle Applications Release 12 [ID 444248.1]
Thanks,
Hussein

Name space conflict between static and instance method

Hello,
there seems to be a very unfortunate name space conflict between static and instance method name. Consider:
static String description() that should return a description of a class.
String description() that should return a description of an instance.
That seems to confuse the compiler. How come? Static and instance methods don't have anything to get confused about.
Thanks for any insights :-)

Umm...jeez.
It's not a bug, it's the way it's supposed to be.
Since a static method can be called the same way an instance method
A instance = new A();
A.staticMethod();
instance.staticMethod();it's not allowed.
Also in the class, you can call
public void myMethod() {
instanceMethodInClass(); // You don't need this, it's superfluous
staticMethodInClass(); // You don't need the class name.
}If you didn't understand, then just accept the fact that it is so. Some day you'll understand it.

Diff between content and application proposal

Hi
When i am assigning infosource to my standard datasource we have three options content,application proposal,others i know that for generic we use others but for standard business content we have content & application proposal options i think when we enhance the datasource we go for application proposal or if i am wrong plz correct me for standard datasources with no enhancement is it ok to go for content option plz confirm.
Regards,
Nikhil.

Hi Pradip,
Thanks for your reply but suprisingly i got an option while assigning for few datasources in SD where i had an option to choose between content and application proposal i had this doubt at this point of time as the system gave me two options and i had to choose b/w content and application propasal offcourse others option was greyed out i choose content option while assigning the infosource is that ok or i had to go with application proposal plz clarify.
Regards,
Nikhil.
Message was edited by: nikhil sharma

Background displaying between main content and footer

Hi guys, I have a bit of a strange one to ask, with a discrepancy between what I am seeing on my website (online), compared to viewing my pages in Dreamweaver. OK, here goes.. online, the footer shows up fine, being directly underneath the main content (with nothing displaying between the footer and the main content) - however when I look at the same pages in Dreamweaver (CC), it shows a very large amount of the purplish background situated directly between the main content and the footer, and taking up an area around 4 times the height of the main content of the page (which basically makes the page 4 times bigger than it needs to be, in Dreamweaver). I hope that description makes sense - so basically (as I scroll down the page in Dreamweaver), firstly I have the main content (taking up 20% of the total height of the page), then below that, the mystical blank area of background color (taking up maybe around 79% of the total height), and then below that, right at the bottom, the footer (say, 1% of the total height). Yet when I view the web pages online, the footer is sitting snugly below the main content, exactly where it is meant to be - which I guess is the important thing, but I am worried that Google will see the issue as some kind of page error, so I would prefer to fix it if I can. Here is a typical page where the issue exists - http://www.mindtraining.net/dreamweaver/motivational-info/index.php I have a feeling it might have something to do with the vertical blue strip I have on the right hand side of each page, as the only page where the issue doesn't exist is the homepage at http://www.mindtraining.net/dreamweaver - which doesn't have the blue strip. Any thoughts would be greatly appreciated. Many thanks, Craig T

Both links are going to the same page. So they are identical.
<I am worried that Google will see the issue as some kind of page error>
Google robots don't see CSS or JavaScript. They index sites based on your HTML content.
Unfortunately, you do have a significant number of code validation errors which need attention to avoid x-browser rendering problems.
[Invalid] Markup Validation of http://www.mindtraining.net/dreamweaver/motivational-info/index.php - W3C Mark…
Do not use spaces in folder & file names. On the web it creates problems b/c spaces are converted to %20. Use underscores or hyphens but no spaces or special characters.
Change all instances of this:
Metamorphic Dreamweaver Template_files
to this:
Metamorphic-Dreamweaver-Template_files
or this:
Metamorphic_Dreamweaver_Template_files
You also have some orphaned HTML tags.
Nancy O.

Space between content and logo

Playing with fluid layouts and getting a space between logo and content DIV's
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
<html xmlns="http://www.w3.org/1999/xhtml" xml:lang="en" lang="en">
<head>
<meta http-equiv="Content-Type" content="text/html; charset=utf-8" />
<title>Playing with Liquid Layouts</title>
<link rel="stylesheet" type="text/css" href="style.css" />
</head>
<body>
<div id="container">
          <div id="logo">
              <h1>Welcome to Liquid Layouts</h1>
              <h2 class="logo">Place your slogan here...</h2>
          </div>
          <div id="navigation">
    <ul>
              <li>Home</li>
        <li>Page 1</li>
        <li>Page 2</li>
        <li>Page 3</li>
        <li>Page 4</li>
        <li>Page 5</li>
    </ul>
    </div>
    <div id="content">
    <h1>Adding this element creates a space between logo and content...</h1>
    </div>
          <div id="footer">
    </div>
</div>
</body>
</html>
@charset "utf-8";
/* CSS Document */
body
          text-align: center;
div#container
          margin-left: auto;
          margin-right: auto;
          min-width: 600px;
          max-width: 2000px;
          text-align: left;
          width: 85%;
div#logo h1, h3
          padding-left: 20px;
          margin-bottom: 0;
div#logo h2
          padding-left: 35px;
          margin-top: 0;
          font-size: 125%;
div#logo
          background-color: #F00;
          width: 100%;
          height: 300px;
div#navigation
          background-color: #0F0;
          width: 25%;
          height: 600px;
          float: left;
div#navigation ul
          padding-left: 25%;
          font-size: 150%;
          list-style-type: square;
div#content
          background-color: #C93;
          width: 100%;
          height: 600px;
          margin-top: 0px;
div#footer
          background-color: #69F;
          height: 30px;;
.footerP
          margin-top: 0px;
          padding-left: 2%;
          line-height: 35px;;
PICTURE:
[IMG]http://i.imgur.com/1nGUG.jpg[/IMG]

The space is caused by the default margin in your H1 tag. As such, you need to define a style for H1:
h1{
margin-top:0;
padding: ??;
You can add padding to move the H1 away from the edges of the surrounding DIV.
EDIT:// An after thought. If you are "Playing with fluid layouts", you might want to consider not using heights and/or set the heights/widths in % values.

Reduce White Space below Site Title and Above Site Content

On a SharePoint Online site wiki home page, I'm in need of a Script Editor snippet that will reduce the amount of white space below the site title and the start of the body/content of the site. (see attached image). Thanks!

Hi,
According to your post, my understanding is that you want to reduce white space in the site title below.
We can use CSS to achieve it, the following CSS style for your reference:
<style>
.ms-rte-layoutszone-inner{
height:0px;
</style>
More information:
Using F12 Developer Tools to Debug HTML and CSS
http://msdn.microsoft.com/en-us/library/gg699337(v=vs.85).aspx
Thanks,
Dennis Guo
TechNet Community Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Dennis Guo
TechNet Community Support

White space issues between content and footer.

Similar Messages

Maybe you are looking for