White spec between glass and screen...

There is a white spec under the glass on my iPad. It's very annoying. Before I go to the Apple store, I'd like to know what it is that they can do for me.
It's easy to see when the screen is locked and not showing anything.

As you said, there is foreign material between the glass and the LCD screen. Apple may replace your iPad with another one if you bring it to the Genius bar. However, they may say that the iPad is acceptable with that minor defect.

Similar Messages

Gap on the top between glass and alu frame?

Is it normal if my 3 week iphone 5 has small gap on the top between glass and alu frame? Is it covered with waranty?

I send my iphone on t-mobile repair service and they didn't change my iphone, so they said that i need to contact apple and wait if they approve changing for new iphone, so please tell me how to contact apple support and send them this image below, sorry for my bad english.

Dust, Debris In Between Glass and LCD

Hi,
A few months ago I purchased a Macbook Pro 13", it is not the newest revision with the nvidia320 graphics, its the older.
Anyways, just a couple days ago, I opened the computer and noticed two pieces of dust in between the glass and display right it the middle of course about two inches apart, they for sure are not dead or stuck pixels as I can get them to move just a tad if I give the screen a few good taps but I don't want to screw up anything, plus a few more specks have came and gone since this started (seemingly moving across the screen over a couple days) but the original two specks are still there it seems to be getting worse and I'm concerned by a month or two the screen is going to have dozens of these specs. I keep my screen and computer super clean, I'm a bit neurotic about that which is why it annoys me so much. I'm wondering if I have a leak i the seal around my screen or something.
Once you see these things you can't un-see them. To make matters worse, I haven't yet bought the applecare but it is still within the one year warranty, and its the old model so I don't know if they would even be able to replace it for me if they could as I'm sure they have started caring only the newest revision. Which would be a problem for me if they just opted to swap the whole thing since I got the faster 2.53 model and not the base, and from the looks of it the newer model only comes in 2.4ghz and 2.66 respectively.
TL;DR, I have an appointment at an Apple Store tomorrow to have them check it out but I don't know if they are going to want me to pay to replace the screen or what, since I don't have apple care but I'm still under 1 year warranty? I'm curious if anyone else has been in a similar situation. This seems likes its a manufacturers defect and not anything I could have caused. It already seemed like I was pulling their teeth when I got my Macbook Pro originally it had several dead pixels and I was able to get them to swap it out so I'm wondering what kind of freak their going to think I am when I show them these pieces of dust lol. But man are they annoying, has anyone else went through this on a model over two weeks old?
images if you wish to look
http://i160.photobucket.com/albums/t169/coryperemsky/macu/e3d7202d.jpg
http://i160.photobucket.com/albums/t169/coryperemsky/macu/c1a3b6e5.jpg
Message was edited by: M0bius1

Hello,
After reading the post and review the pictures I think I have the same problem.
I bought a MacBook Pro 13" in December 2009 (still under warranty) through Apple Store and I noticed what I thought was a dead pixel. Looking better, even with the screen off, there is something in the sector. I took it to an Apple service and said it was a speck of dust behind the glass. I made the request to repair to Apple Care and have not had a response succesfull.
Would greatly appreciate any suggestions from you guys.
Greetings.
Here are some pictures:
http://img843.imageshack.us/img843/8144/7sinbrillooblicualcdcri.jpg
http://img197.imageshack.us/img197/4059/6pantallaapagadaoblicua.jpg
http://img20.imageshack.us/img20/5391/5pantallaapagadafrente.jpg
http://img689.imageshack.us/img689/9932/4conbrillofrente2.jpg
http://img535.imageshack.us/img535/4333/3conbrillofrente1.jpg
Message was edited by: Jorge Castillo S.

White gaps between regular and video slides

I have just created an adobe captivate video. There is a white gap between regular slides and animation slides. It usually lasts for about 2 seconds. Because of this my audio and video are no longer synced. This gradually gets worse as the presentation continues. Does anybody know how to get rid of these white gaps? I'm using version 3. The issue is demonstrated in the following video:
http://screencast.com/t/hqczdmV69b9
Thanks in advance.

It looks like they go all the way to the end of the slide. It is happening somewhere between slide 7 and slide 8 (see attached screen shots). Thanks again Rod.

How to remove water from between glass and lcd

I took my phone into repair a few weeks back and probably got non OEM parts. Now after having my phone near the pool for a couple of swims, I've got water stuck between the glass and LCD. The phone works fine. Just lots of spots on the screen. Best way to dry out? Rice? Take it apart? Open to some suggestions. Thanks.

Put in a bowl covered by uncooked rice on a radiator or heated floor for min 48hours

Foam sheet between keyboard and screen, Replacement?

Hi,
I'm wondering if anybody knows if this has a part number ? and where can
I get one ?
I'm wanting to know if I can get a factory replacement of the thin foam sheet
that is part of the packing materials that goes between the keyboard and screen.
You know, when your Powerbook was new, when you opened the lid
for the first time, there was that thin foam sheet over the keyboard, speakers,
trackpad the whole surface area. I guess it's more like the foam is the size of
the whole screen area, to protect the screen.
This may seem silly to want to replace this, but I have a PowerBook that's coming
up on 3 years old and every time I have closed the lid (screen) I have put the thin
foam in to protect the screen. So, the screen is perfect after 3 years.
Much different than my co-workers PowerBooks. They didn't see any
need for this foam and didn't use it and their screens are etched / scratched from
the keys, mirror images of the keys scratched into their screens.

Hi there,
I'm not sure if Apple assigns part numbers for their packing materials, but you could either visit your local Apple store to see if they happen to have any of these lying around, or you could purchase a screen protector to do the job.
I used the foam sheet for a few years, but lost it recently, so I went out and bought an iKlear Cleaning kit which included a polish cloth which is the size of the keyboard and trackpad area, and I find it does a fine job of protecting the screen.
Go to klearscreen.com and have a look.

White space between header and main content

Hello all! I have a 25-27px white space between my header and
main content. I read through fixes in the forum and took out any
height that would effect this gap. I still can't get rid of this
white space. Your help is greatly appreciated! Here's the Code:
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0
Transitional//EN" "
http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
<html xmlns="
http://www.w3.org/1999/xhtml">
<head>
</script>
<meta http-equiv="Content-Type" content="text/html;
charset=utf-8" />
<title>Untitled Document</title>
<style type="text/css">

</style>
<script src="SpryAssets/SpryMenuBar.js"
type="text/javascript"></script>
<link href="SpryAssets/SpryMenuBarHorizontal.css"
rel="stylesheet" type="text/css" />
<style type="text/css">

</style>
<link href="p7hscroller/s7/p7HSM07.css" rel="stylesheet"
type="text/css" media="all" />
<script type="text/javascript"
src="p7hscroller/p7hsmscripts.js"></script>
<style type="text/css">

</style>

<script type="text/javascript"
src="slideshow.js"></script>
</head>
<body class="oneColElsCtrHdr">
<div id="container">
<div id="header">
<pre><span
class="style4">US-AsianMates</span><span
class="style6">.com</span> <strong><span
class="style9">JOIN FOR FREE <span
class="style7">OR</span> MEMBER LOG
IN</span></strong>
</pre>
<ul id="MenuBar1" class="MenuBarHorizontal">
<li>
<div align="center"><a href="#"
class="style16">HOME</a> </div>
</li>
<li>
<div align="center"><a href="#"
class="style16">ABOUT US</a></div>
</li>
<li>
<div align="center"><a href="#"
class="style16">WHY JOIN US?</a> </div>
</li>
<li>
<div align="center"><a href="#"
class="style16">VISA SUPPORT</a></div>
</li>
<li>
<div align="center" class="style16"><a
href="#">EVENTS</a></div>
</li>
</ul>
<pre>
</pre>
</div>
<div id="mainContent">
<div id="apDiv1"><img
src="Images/Outdoor_Bride1.jpg" alt="Bride" name="Bride"
width="525" id="Bride" /></div>
<p> </p>
<p><br>
</p>
<pre>
</pre>
<table width="200" border="1" align="left">
<tr>
<td><img src="Romantic_Kiss.jpg" alt="VISA"
name="VISASUPPORT" width="200" id="VISASUPPORT" /></td>
</tr>
<tr>
<td><img src="Surfing_At_Home.jpg" alt="JOIN"
name="WHYJOIN" width="200" id="WHYJOIN" /></td>
</tr>
</table>
<pre></pre>
<div id="apDiv3">
<div align="center">
<div align="left">
<pre class="style14"> <strong>LIVING
PROOF</strong>
<span class="style15">"12 YEARS AGO I WENT TO
THE PHILIPPINES IN HOPES
OF FINDING MY FUTURE WIFE. 11 YEARS LATER,
I AM HAPPILY MARRIED! WE ALSO HAVE AN ENERGETIC
5 YEAR OLD SON! DREAM IT, LIVE IT! IT CAN
HAPPEN TO YOU ON US-ASIANMATES.COM
CHRIS"</span></pre>
</div>
</div>
</div>
<pre> </span>
</pre></pre>
<p>
<br>
<pre>
</pre>
<div id="apDiv7"></div>
<div align="center">
<pre>
<script type="text/javascript">
// <![CDATA[
XMLFlashSlideshow_v3({swf:'slideshow.swf',w:'580',h:'140',redirect:'',usePreloader:'true', xml:'slideshow_data0.xml',preventCache:'true',disableMultipleXML:'false',initXML:'%3C?xml% 20version=%221.0%22%20encoding=%22utf-8%22?%3E%3Cslideshow%20version=%223%22%3E%3Cstyles%3 E%3CPreloader%20label=%22Loading%20%7BN%7D%2525%22%20iconColor=%22#666666%22%20iconAlpha=% 2270%22%20iconWidth=%2250%22%3E%3C/Preloader%3E%3CPreloaderLabel%20font=%22Verdana%22%20si ze=%2210%22%20color=%22#666666%22%20bold=%22false%22%3E%3C/PreloaderLabel%3E%3CBackground% 20backgroundColor=%22#FFFFFF%22%20backgroundAlpha=%22100%22%20bevelColor=%22#FFFFFF%22%20b evelStrength=%2270%22%20borderWidth=%222%22%20borderColor=%22#000000%22%3E%3C/Background%3 E%3CLoaderAnimation%20type=%22circle%22%20color=%22#FFFFFF%22%20alphaBackground=%2220%22%2 0alphaInner=%2240%22%20frameWidth=%222%22%20width=%2250%22%20height=%2250%22%3E%3C/LoaderA nimation%3E%3CDataLoader%20useAnimation=%22true%22%20useLabel=%22true%22%20labelPlacement= %22bottom%22%20fadeOutDuration=%22400%22%20textFormat=%22loader_text%22%3E%3C/DataLoader%3 E%3C/styles%3E%3Clocalization%3E%3Ctext%20orig=%22Loading%20Data...%22%20local=%22Loading% 20Data...%22%3E%3C/text%3E%3C/localization%3E%3Cfonts%3E%3Cfont%20id=%22loader_text%22%20n ame=%22Pixelade%22%20embed=%22true%22%20size=%2213%22%20color=%22#666666%22%20bold=%22fals e%22%20selectable=%22false%22%20align=%22left%22%3E%3C/font%3E%3C/fonts%3E%3C/slideshow%3E '});
// ]]>
</script>

</pre>
</div>
<pre>
</pre>
<pre> </pre>
<pre> </pre>
</div>
<div id="footer">
<p>Footer</p>
</div>
</div>
<script type="text/javascript">

</script>
</body>
</html>

"phillychris" <[email protected]> wrote in
message
news:[email protected]...
> Yep, it was the 1 pre tag creating the gap. So why is
this page a
> disaster, Tim?
Just because something is created in DW CS3 doesn't mean it's
not a
disaster, any more than using DeWalt power tools guarantees
that my
carpentry won't be a complete mess. The software is not a
replacement for
skills. It is a tool; your workflow and understanding of HTML
and CSS is
what allows you to use DW effectively.
So why did I call this page a disaster? When I see all that
extra markup,
spans, and inline tags, I shudder. It's way too hard to
troubleshoot. You're
not doing nearly enough with descendant selectors; instead,
most of your
code is inline, despite a huge CSS file.
Just one example: individual li tags with div align="center"
inside of them.
Way overkill. If you're centering all the li text in a given
list, control
it with CSS and kill all that extra markup.
E.g.
.MenuBarHorizontal li { text-align:center; }
In fact, if all there is in that .MenuBarHorizontal is the
list, you don't
even need to specify the list in the CSS. Just do:
.MenuBarHorizontal { text-align:center; }
Now you don't need div tags inside your li at all.
And if all of those a tags in that menu are going to be
.style16 class,
don't specify it on each link. In fact, don't even have a
.style 16 class.
Heck, since it's just specifying font size, you don't need to
target the a
tag at all. Just add font-size:x-small; to the
.MenuBarHorizontal ruleset I
gave you above.
The above are just examples from a quick glance at your code.
On the whole,
your markup and approach to styles are largely wasting the
power and point
of CSS.
In addition, several styles spanned onto one line of text...
a sure sign
that either you are using far too many styles to make design
sense, or else
you've got styles that overlap each other.
Here's my advice: Until you get a better handle on CSS, don't
style things
as you go. Forget styles altogether at the start. Create a
very clean HTML
markup and put ID and class selectors on things you know will
need them.
Preferably, place the HTML elements in the order you would
want your page
read if styling did not even exist, nesting elements where
necessary.
After you have created all the HTML structure, then go back
and style the
elements via CSS only. You will end up with less page weight
and far cleaner
code to decipher, not simply in terms of length but in terms
of conflicts
and redundancies.
If you're really insistent on styling things as you go, at
least do this:
don't create a new style every time you want to accomplish
something. Create
CSS rules for IDed containers and container classes. Then as
you go along
and are about to create a style, ask yourself where you are
and what all
this new rule needs to apply to. Specify the rule there,
under the selector
you've already created. Then you won't have .style1 -
.style16 like you do
now, and you won't have all that inline mess of code to sort
through.
Finally - as you create your CSS, discipline yourself to
avoid style spans.
They are necessary on the odd occasion, but very rarely.
Think semantically
(i.e. purpose of the style point you're making at a given
time).
For example, if you're tempted to create a span in order to
put something in
bold red, ask yourself: "Why?" Generally, it means you want
to place special
emphasis or strength on that. Well, in that case you don't
need a span. You
need to be using the proper tag, such as <em>
(emphasis) or <strong>. Then
you can style that tag in CSS. That way, what you have in
your page actually
makes sense apart from the style, and as a bonus you can
apply or edit your
style easily.
Tim G.
http://www.pactumweb.com
http://www.shortordersite.com
Be smart:
http://www.pactumweb.com/client/tips.php

"White spaces between publicId and systemId"

Hi, I'm trying to export a war file from a sample GoogleSearch portlet I downloaded. When I export, i get the following:
Loading stylesheet C:\googlesearch\nbproject\j2ee13-jsp.xsl
: Error! White spaces are required between publicId and systemId.
: Error! File not found: com.sun.org.apache.xml.internal.utils.WrappedRuntimeException: White spaces are required between publicId and systemId.
: Error! com.sun.org.apache.xalan.internal.xsltc.TransletException: java.io.FileNotFoundException: Readme.html
Failed to process C:\googlesearch\dist\tmp\Help.jsp.before.j2ee13
C:\googlesearch\nbproject\build-impl.xml:435: javax.xml.transform.TransformerException: com.sun.org.apache.xalan.internal.xsltc.TransletException: com.sun.org.apache.xalan.internal.xsltc.TransletException: java.io.FileNotFoundException: Readme.html
BUILD FAILED (total time: 6 seconds)Anyone have any ideas what I can do to fix this?

The problem is that the build setup tries to include page fragments into the main pages at build time for J2EE 1.3 setups. We found too many 1.3 containers which could not handle our page fragments.
Now this sample has a directive.include in the Help.jsp which points not to a Creator page fragment but to a normal html page. So the build setup stumbles over that.
So you have three alternatives;-)
* Go into the source of the Help.jsp and comment the include of the Readme.html.
* Make the Readme.html a real XML/XHTML page.
* Change the j2ee13-jsp.xsl to do the static include only for real page fragments (*.jspf). [I'm not a XSL expert but I could not get that to work in our setup:-(]
Thanks,
-- Marco

Xperia z3 D6603 concern over gaps between glass and frame.

Hello,
I recently upgraded my ion to z3. And there is no doubt that it's an amazing phone.
But I have some concerns regarding the small gaps between glass panel and metal frame. It gets dust and more over that I am worried about its waterproofing. I want to know is it normal for all z3 out there or is it just me? What if it can't handle water in this regard?
There are some pictures.
Solved!
Go to Solution.

This subject has been mentioned many times before, from the Z all the way thru the models up to the Z3.......you have to have some uniform gap between the panels & the bezel...this is to allow some form of expansion due to temp changes, if you think about it.......if it was packed tight & the phone heats up the expansion would have nowhere to go resulting in damage. The gaps do not mean that you have a waterproof issue either.....
Hope this helps

Finger shock when touching between glass and bezel

Hi
Follow up to my previous post I have noticed a small shock when placeing my finger on the glass and the bezel that runs over the tip of my finger!
My previous post I was getting wierd arm sensations using the phone without it pluged in like a poorly placed slendertone (muscle stimulator) machine as wierd as that sounds I like to say this is a wind up but it really aint!
I thought I was going mad but theres defo something up with this phone sometimes its quite painfull like a deep ache in my muscle up to my elbo even a friend of mine can feel the tingle up her arm.
Any ideas of a fix or is it an apple service? I really am anoyed now this is my 3rd Iphone and this one works flawless and has a brill screen etc I dont want to part with it!
cARL

I've been getting electric shocks too. I have a rubber case on my g3s and if my finger gets close to the silence button it will give a nasty shock similiar to a pin jabbing me. At first I used to check to make sure I was not bleeding from a splinter or something. Not sure if it is static but it certainly feels stronger and thinner than a usual static bolt and I could not see the bolt like you can with regular static shock.
I've heard of other guys getting shocked in the face or ear and dropping their phones. One other site talking about insurance for iphones (lol) tells of their daughter getting a bad zap in the car and she dropped the phone smashing the screen. From the online frequency of this (example: http://www.cnet.com.au/apple-warns-of-static-shock-from-iphone-ipod-339296535.ht m ) I am wondering if there is something faulty in the insulation? It seems that the ear bud shock forums would all be related too since electricity does not care how it gets out to shock the **** out of you.
Im still not sold that it is definitely static. If it is, does anyone know if there are good ways of discharging the static, if that's what it really is (im sure there's plenty of devotees ready to swear on their life it is just static so don't bother telling me that unless you can back it up with technical reasons why it is much sharper than a regular static shock, stings like a needle rather than buzzes, and cannot be seen like the usual static shock).
Apple: Since the complaints seem to be frequent have Apple actually investigated and did any testing on the internal grounding due to these complaints? If so - What was the outcome?
Apple: Has Apple checking into shock reduction if using three prong ac jacks?
Thanks,
S

Gap on bottom between glass and frame

Hi all,
I got a D6653 last week, absolutely loving it BTW. However, I've come to noticed a decent gap on the bottom of the device, between the glass and frame. I don't see the same gap on top, which makes me think it's a manufacturing issue. But, when I look at the back of the device, I see the same thing. Does anyone else see this? Is it normal? This is my first Xperia device.
The gap is starting to collect particles and it's looking very unattractive about now (only in 4 days). Also, it makes me question the waterproof capabilitly. I would imagine the phone assembly would have to be very tight to be able to make that promise.
Would appreciate any feedback, thanks.

Joshnor713 wrote:
Hi all,
I got a D6653 last week, absolutely loving it BTW. However, I've come to noticed a decent gap on the bottom of the device, between the glass and frame. I don't see the same gap on top, which makes me think it's a manufacturing issue. But, when I look at the back of the device, I see the same thing. Does anyone else see this? Is it normal? This is my first Xperia device.
The gap is starting to collect particles and it's looking very unattractive about now (only in 4 days). Also, it makes me question the waterproof capabilitly. I would imagine the phone assembly would have to be very tight to be able to make that promise.
Would appreciate any feedback, thanks.
Any pictures?
It's definitely a manufacturing error, and you should get a replacement. I have the Z2 and have a LOT of gaps. Fortunately the device is still waterproof, but it doesn't feel right when you notice the gaps.
Just get a replacement (should be covered).

Seal Between Glass And Chrome Is Peeling Back...

I noticed this morning as I was keeping my iPhone nice and shiny with the provided cleaning cloth that the rubber seal between the glass and the chrome accent is slightly starting to peel back on the bottom left corner...
It's only minor right now but if you gently run your finger over the imperfection the rubber shifts out of place every time...It's an issue that I think will only worsen with time I'm sure...Not to mention the imperfection is aesthetically unpleasing now that I've noticed it...
Is this something that the Apple Store would be willing to fix/replace under warranty and has anyone else had this issue?
Thanks!

Outfitting your phone with a case should not be a solution. As much as I respect peoples decision to use a case; iphone, ipod, I find it funny to hear them talk about how beautiful the ipod is yet their player looks like <edited by host>. I mean, you don't see BMW drivers driving around with car covers, do you? You lose the aesthetic beauty of the product. Just a personal observation. Peace.

Gap between glass and metal band.

I have a really thin gaps between the glass and metal band in the upper front and back right corner, and was wondering if anyone else has noticed small gaps between the glass and metal band anywhere on their phone. ive had nothing but crappy customer service at both apple stores near me, but was eventually told by the "genius" that i could come back with another appointment before the 30 days and swap for a new retail phone in the box.
The only thing that worries me is getting a whole new phone with more different problems then the one i have with only the gap issue. The "genius" also told me that im the first one that has had this issue, yet ive seen threads about a month or so ago with people saying they had the same issue. so as an update, has anyone noticed this now?
Message was edited by: xalexinchainsx
Message was edited by: xalexinchainsx

ya, but this isnt the first time ive had bad customer service with apple. Granted it was a different apple store, but about 3 days after i bought the phone i made an appointment, and took it in for the same separation issue. This time the guy seemed almost clueless as he had to ask his co workers questions i was asking him. Thankfully a manager overheard the situation and informed him that it was an issue that needed to be taken care of. So the guy goes to the back, comes out with a phone from the black box (At the time i had no clue of how the black boxes worked), and i ask if it was a new or refurbished phone, and he assured me it was a new one.
So after inspecting the phone i noticed another gap in the glass and told the worker and he replies with "its not that bad, i dont think yours was that bad either". after seeing the same issue and getting his response, i decided to just keep mine and make a different appointment at another store (Today). Oh, might I add that after we leave the store, my girlfriend tells me that as i picked up the phone to inspect it, the guy rolls his eyes. Just experiences like these leave a biter taste in my mouth. its sad that a couple experiences from non corporate workers would make me start to dislike a company.

IPod touch has dust in between Glass and touch screen.

A few days ago I noticed there were several specs of dust inside my iPod touch screen. As the days have gone by, there are now considerably more, some of which are Very noticeable on bright or white pictures. They are mostly near the bottom which leads me to believe they've come in through the dock connector somehow, but there are some near the top of the display as well. I'm wondering if this is a known issue and whether or not it can be repaired or cleaned. Has anyone else had this issue?
Thanks in advance,
Simon Leonard

Maybe its just that model, or just you guys. Ive have my 8GB for a little over a month and I haven't had a problem like you are describing. Give Apple a call and see what they have to say it about it. Thats just my two cents.

Gap between glass and bezel on iPhone 5?

http://www.flickr.com/photos/78962116@N07/8405746907/in/photostream/
See the link above (theres a picture) for the image.
So guys, I purchased my iPhone 5 this Saturday and, having not dropped, banged, or anything of the sort to my phone since then, I noticed this gap between the glass pane at the top of the phone's back and the bezel surrounding the device.
I am so completely OCD about things like this, and so everytime I pick up my phone, I have to look at it... I hate it. I have looked at several other white iPhone 5s in person, and none have this issue. I am debating wether to take it to the Apple Store or not.
Also, the sleep/wake and volume buttons feel extremely loose and they were not on either of the other devices I held.

What if I purchased the phone from an AT&T store, not an Apple Store? Will that affect anything? And how long do I have the warranty until (I have a normal warranty, not extended)?
^Sorry for all the questions!

White spec between glass and screen...

Similar Messages

Maybe you are looking for